diff options
Diffstat (limited to 'include')
28 files changed, 188 insertions, 89 deletions
diff --git a/include/configs/flea3.h b/include/configs/flea3.h index 4350518939..16f2d2ac48 100644 --- a/include/configs/flea3.h +++ b/include/configs/flea3.h @@ -31,7 +31,6 @@ /* High Level Configuration Options */ #define CONFIG_ARM1136 /* This is an arm1136 CPU core */ #define CONFIG_MX35 -#define CONFIG_MX35_HCLK_FREQ 24000000 #define CONFIG_SYS_DCACHE_OFF #define CONFIG_SYS_CACHELINE_SIZE 32 diff --git a/include/configs/harmony.h b/include/configs/harmony.h index d0555c1630..e407ff4ca5 100644 --- a/include/configs/harmony.h +++ b/include/configs/harmony.h @@ -34,15 +34,15 @@ /* High-level configuration options */ #define V_PROMPT "Tegra20 (Harmony) # " -#define CONFIG_TEGRA20_BOARD_STRING "NVIDIA Harmony" +#define CONFIG_TEGRA_BOARD_STRING "NVIDIA Harmony" /* Board-specific serial config */ #define CONFIG_SERIAL_MULTI -#define CONFIG_TEGRA20_ENABLE_UARTD +#define CONFIG_TEGRA_ENABLE_UARTD /* UARTD: keyboard satellite board UART, default */ #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE -#ifdef CONFIG_TEGRA20_ENABLE_UARTA +#ifdef CONFIG_TEGRA_ENABLE_UARTA /* UARTA: debug board UART */ #define CONFIG_SYS_NS16550_COM2 NV_PA_APB_UARTA_BASE #endif @@ -62,8 +62,15 @@ #define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT -/* Environment not stored */ -#define CONFIG_ENV_IS_NOWHERE +/* NAND support */ +#define CONFIG_CMD_NAND +#define CONFIG_TEGRA_NAND +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE NV_PA_NAND_BASE + +/* Environment in NAND (which is 512M), aligned to start of last sector */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET (SZ_512M - SZ_128K) /* 128K sector size */ /* USB Host support */ #define CONFIG_USB_EHCI @@ -80,6 +87,6 @@ #define CONFIG_CMD_NET #define CONFIG_CMD_DHCP -#include "tegra20-common-post.h" +#include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/ima3-mx53.h b/include/configs/ima3-mx53.h index 567061aee3..dbc59b91e9 100644 --- a/include/configs/ima3-mx53.h +++ b/include/configs/ima3-mx53.h @@ -64,7 +64,6 @@ /* Ethernet on FEC */ #define CONFIG_NET_MULTI #define CONFIG_MII -#define CONFIG_DISCOVER_PHY #define CONFIG_FEC_MXC #define IMX_FEC_BASE FEC_BASE_ADDR @@ -72,7 +71,7 @@ #define CONFIG_PHY_ADDR CONFIG_FEC_MXC_PHYADDR #define CONFIG_RESET_PHY_R #define CONFIG_FEC_MXC_NO_ANEG -#define CONFIG_PRIME "FEC0" +#define CONFIG_ETHPRIME "FEC0" /* SPI */ #define CONFIG_HARD_SPI diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h index 8cca478578..6ae764a2d4 100644 --- a/include/configs/imx31_litekit.h +++ b/include/configs/imx31_litekit.h @@ -33,7 +33,6 @@ /* High Level Configuration Options */ #define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ #define CONFIG_MX31 1 /* in a mx31 */ -#define CONFIG_MX31_HCLK_FREQ 26000000 #define CONFIG_MX31_CLK32 32000 #define CONFIG_DISPLAY_CPUINFO diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h index b21621ca9e..f36ceea57f 100644 --- a/include/configs/imx31_phycore.h +++ b/include/configs/imx31_phycore.h @@ -33,7 +33,6 @@ /* High Level Configuration Options */ #define CONFIG_ARM1136 /* This is an arm1136 CPU core */ #define CONFIG_MX31 /* in a mx31 */ -#define CONFIG_MX31_HCLK_FREQ 26000000 #define CONFIG_MX31_CLK32 32000 #define CONFIG_DISPLAY_CPUINFO diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h index d0f2b481d5..9eb2a547fc 100644 --- a/include/configs/m28evk.h +++ b/include/configs/m28evk.h @@ -171,9 +171,9 @@ #define CONFIG_LZO #define CONFIG_MTD_DEVICE #define CONFIG_MTD_PARTITIONS -#define MTDIDS_DEFAULT "nand0=gpmi-nand.0" +#define MTDIDS_DEFAULT "nand0=gpmi-nand" #define MTDPARTS_DEFAULT \ - "mtdparts=gpmi-nand.0:" \ + "mtdparts=gpmi-nand:" \ "3m(bootloader)ro," \ "512k(environment)," \ "512k(redundant-environment)," \ diff --git a/include/configs/medcom.h b/include/configs/medcom.h index bce03a49fa..678b36b6cf 100644 --- a/include/configs/medcom.h +++ b/include/configs/medcom.h @@ -35,11 +35,11 @@ /* High-level configuration options */ #define V_PROMPT "Tegra20 (Medcom) # " -#define CONFIG_TEGRA20_BOARD_STRING "Avionic Design Medcom" +#define CONFIG_TEGRA_BOARD_STRING "Avionic Design Medcom" /* Board-specific serial config */ #define CONFIG_SERIAL_MULTI -#define CONFIG_TEGRA20_ENABLE_UARTD /* UARTD: debug UART */ +#define CONFIG_TEGRA_ENABLE_UARTD /* UARTD: debug UART */ #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE #define CONFIG_BOARD_EARLY_INIT_F @@ -78,6 +78,6 @@ "ext2load mmc 0 0x17000000 /boot/uImage;" \ "bootm" -#include "tegra20-common-post.h" +#include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h index 359a308305..96c143efb9 100644 --- a/include/configs/mx25pdk.h +++ b/include/configs/mx25pdk.h @@ -17,7 +17,6 @@ /* High Level Configuration Options */ -#define CONFIG_MX25_CLK32 32768 /* OSC32K frequency */ #define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_TEXT_BASE 0x81200000 diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h index 4e1e6bc0a8..dffb744c3d 100644 --- a/include/configs/mx28evk.h +++ b/include/configs/mx28evk.h @@ -184,6 +184,9 @@ #define CONFIG_EHCI_MXS_PORT 1 #define CONFIG_EHCI_IS_TDI #define CONFIG_USB_STORAGE +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX +#define CONFIG_USB_ETHER_SMSC95XX #endif /* I2C */ @@ -199,6 +202,7 @@ #ifdef CONFIG_CMD_SPI #define CONFIG_HARD_SPI #define CONFIG_MXS_SPI +#define CONFIG_MXS_SPI_DMA_ENABLE #define CONFIG_SPI_HALF_DUPLEX #define CONFIG_DEFAULT_SPI_BUS 2 #define CONFIG_DEFAULT_SPI_MODE SPI_MODE_0 @@ -235,7 +239,6 @@ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTFILE "uImage" -#define CONFIG_BOOTCOMMAND "run bootcmd_net" #define CONFIG_LOADADDR 0x42000000 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR #define CONFIG_OF_LIBFDT @@ -244,13 +247,80 @@ * Extra Environments */ #define CONFIG_EXTRA_ENV_SETTINGS \ - "console_fsl=console=ttyAM0" \ - "console_mainline=console=ttyAMA0" \ - "netargs=setenv bootargs console=${console_mainline}" \ + "update_nand_full_filename=u-boot.nand\0" \ + "update_nand_firmware_filename=u-boot.sb\0" \ + "update_sd_firmware_filename=u-boot.sd\0" \ + "update_nand_firmware_maxsz=0x100000\0" \ + "update_nand_stride=0x40\0" /* MX28 datasheet ch. 12.12 */ \ + "update_nand_count=0x4\0" /* MX28 datasheet ch. 12.12 */ \ + "update_nand_get_fcb_size=" /* Get size of FCB blocks */ \ + "nand device 0 ; " \ + "nand info ; " \ + "setexpr fcb_sz ${update_nand_stride} * ${update_nand_count};" \ + "setexpr update_nand_fcb ${fcb_sz} * ${nand_writesize}\0" \ + "update_nand_full=" /* Update FCB, DBBT and FW */ \ + "if tftp ${update_nand_full_filename} ; then " \ + "run update_nand_get_fcb_size ; " \ + "nand scrub -y 0x0 ${filesize} ; " \ + "nand write.raw ${loadaddr} 0x0 ${update_nand_fcb} ; " \ + "setexpr update_off ${loadaddr} + ${update_nand_fcb} ; " \ + "setexpr update_sz ${filesize} - ${update_nand_fcb} ; " \ + "nand write ${update_off} ${update_nand_fcb} ${update_sz} ; " \ + "fi\0" \ + "update_nand_firmware=" /* Update only firmware */ \ + "if tftp ${update_nand_firmware_filename} ; then " \ + "run update_nand_get_fcb_size ; " \ + "setexpr fcb_sz ${update_nand_fcb} * 2 ; " /* FCB + DBBT */ \ + "setexpr fw_sz ${update_nand_firmware_maxsz} * 2 ; " \ + "setexpr fw_off ${fcb_sz} + ${update_nand_firmware_maxsz};" \ + "nand erase ${fcb_sz} ${fw_sz} ; " \ + "nand write ${loadaddr} ${fcb_sz} ${filesize} ; " \ + "nand write ${loadaddr} ${fw_off} ${filesize} ; " \ + "fi\0" \ + "update_sd_firmware=" /* Update the SD firmware partition */ \ + "if mmc rescan ; then " \ + "if tftp ${update_sd_firmware_filename} ; then " \ + "setexpr fw_sz ${filesize} / 0x200 ; " /* SD block size */ \ + "setexpr fw_sz ${fw_sz} + 1 ; " \ + "mmc write ${loadaddr} 0x800 ${fw_sz} ; " \ + "fi ; " \ + "fi\0" \ + "script=boot.scr\0" \ + "uimage=uImage\0" \ + "console_fsl=ttyAM0\0" \ + "console_mainline=ttyAMA0\0" \ + "mmcdev=0\0" \ + "mmcpart=2\0" \ + "mmcroot=/dev/mmcblk0p3 rw\0" \ + "mmcrootfstype=ext3 rootwait\0" \ + "mmcargs=setenv bootargs console=${console_mainline},${baudrate} " \ + "root=${mmcroot} " \ + "rootfstype=${mmcrootfstype}\0" \ + "loadbootscript=" \ + "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "source\0" \ + "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "bootm\0" \ + "netargs=setenv bootargs console=${console_mainline},${baudrate} " \ "root=/dev/nfs " \ - "ip=dhcp nfsroot=${serverip}:${nfsroot}\0" \ - "bootcmd_net=echo Booting from net ...; " \ - "run netargs; " \ - "dhcp ${uimage}; bootm\0" \ + "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ + "netboot=echo Booting from net ...; " \ + "run netargs; " \ + "dhcp ${uimage}; bootm\0" + +#define CONFIG_BOOTCOMMAND \ + "if mmc rescan ${mmcdev}; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "else run netboot; " \ + "fi; " \ + "fi; " \ + "else run netboot; fi" #endif /* __MX28EVK_CONFIG_H__ */ diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h index 081fbf6905..9d9f4a7822 100644 --- a/include/configs/mx31ads.h +++ b/include/configs/mx31ads.h @@ -27,8 +27,6 @@ /* High Level Configuration Options */ #define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ #define CONFIG_MX31 1 /* in a mx31 */ -#define CONFIG_MX31_HCLK_FREQ 26000000 /* RedBoot says 26MHz */ -#define CONFIG_MX31_CLK32 32768 #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h index 17d3143eba..b272674f82 100644 --- a/include/configs/mx31pdk.h +++ b/include/configs/mx31pdk.h @@ -35,8 +35,6 @@ /* High Level Configuration Options */ #define CONFIG_ARM1136 /* This is an arm1136 CPU core */ #define CONFIG_MX31 /* in a mx31 */ -#define CONFIG_MX31_HCLK_FREQ 26000000 -#define CONFIG_MX31_CLK32 32768 #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h index 9bc6bd4470..38b1546584 100644 --- a/include/configs/mx35pdk.h +++ b/include/configs/mx35pdk.h @@ -31,7 +31,6 @@ /* High Level Configuration Options */ #define CONFIG_ARM1136 /* This is an arm1136 CPU core */ #define CONFIG_MX35 -#define CONFIG_MX35_HCLK_FREQ 24000000 #define CONFIG_DISPLAY_CPUINFO @@ -111,6 +110,12 @@ #define CONFIG_NET_RETRY_COUNT 100 #define CONFIG_CMD_DATE +#define CONFIG_CMD_MMC +#define CONFIG_DOS_PARTITION +#define CONFIG_EFI_PARTITION +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT + #define CONFIG_BOOTDELAY 3 #define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */ @@ -238,6 +243,13 @@ #define CONFIG_MXC_NAND_HWECC #define CONFIG_SYS_NAND_LARGEPAGE +/* mmc driver */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_ESDHC_NUM 1 + /* * Default environment and default scripts * to update uboot and load kernel @@ -279,8 +291,8 @@ "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0" \ "load=tftp ${loadaddr} ${u-boot}\0" \ "uboot_addr=" xstr(CONFIG_SYS_MONITOR_BASE) "\0" \ - "update=protect off ${uboot_addr} +40000;" \ - "erase ${uboot_addr} +40000;" \ + "update=protect off ${uboot_addr} +80000;" \ + "erase ${uboot_addr} +80000;" \ "cp.b ${loadaddr} ${uboot_addr} ${filesize}\0" \ "upd=if run load;then echo Updating u-boot;if run update;" \ "then echo U-Boot updated;" \ diff --git a/include/configs/paz00.h b/include/configs/paz00.h index 0eb9f3b604..24cda4839e 100644 --- a/include/configs/paz00.h +++ b/include/configs/paz00.h @@ -27,11 +27,11 @@ /* High-level configuration options */ #define V_PROMPT "Tegra20 (Paz00) MOD # " -#define CONFIG_TEGRA20_BOARD_STRING "Compal Paz00" +#define CONFIG_TEGRA_BOARD_STRING "Compal Paz00" /* Board-specific serial config */ #define CONFIG_SERIAL_MULTI -#define CONFIG_TEGRA20_ENABLE_UARTA +#define CONFIG_TEGRA_ENABLE_UARTA #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE #define CONFIG_MACH_TYPE MACH_TYPE_PAZ00 @@ -51,8 +51,9 @@ /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_ENV_IS_IN_MMC -#define CONFIG_ENV_OFFSET ((2 * 1024 * 1024) - CONFIG_ENV_SIZE) +#define CONFIG_ENV_OFFSET ((1024 * 1024) - CONFIG_ENV_SIZE) #define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_SYS_MMC_ENV_PART 2 /* USB Host support */ #define CONFIG_USB_EHCI @@ -68,6 +69,6 @@ #define CONFIG_CMD_NET #define CONFIG_CMD_DHCP -#include "tegra20-common-post.h" +#include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/plutux.h b/include/configs/plutux.h index 42291d4e28..65b42edc27 100644 --- a/include/configs/plutux.h +++ b/include/configs/plutux.h @@ -35,11 +35,11 @@ /* High-level configuration options */ #define V_PROMPT "Tegra20 (Plutux) # " -#define CONFIG_TEGRA20_BOARD_STRING "Avionic Design Plutux" +#define CONFIG_TEGRA_BOARD_STRING "Avionic Design Plutux" /* Board-specific serial config */ #define CONFIG_SERIAL_MULTI -#define CONFIG_TEGRA20_ENABLE_UARTD /* UARTD: debug UART */ +#define CONFIG_TEGRA_ENABLE_UARTD /* UARTD: debug UART */ #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE #define CONFIG_BOARD_EARLY_INIT_F @@ -78,6 +78,6 @@ "ext2load mmc 0 0x17000000 /boot/uImage;" \ "bootm" -#include "tegra20-common-post.h" +#include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/qong.h b/include/configs/qong.h index 485e1b1f04..c2bd09729d 100644 --- a/include/configs/qong.h +++ b/include/configs/qong.h @@ -28,8 +28,6 @@ #define CONFIG_ARM1136 /* This is an arm1136 CPU core */ #define CONFIG_MX31 /* in a mx31 */ #define CONFIG_QONG -#define CONFIG_MX31_HCLK_FREQ 26000000 /* 26MHz */ -#define CONFIG_MX31_CLK32 32768 #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO diff --git a/include/configs/sc_sps_1.h b/include/configs/sc_sps_1.h index 0ebdfb8217..f5dc393020 100644 --- a/include/configs/sc_sps_1.h +++ b/include/configs/sc_sps_1.h @@ -39,8 +39,6 @@ #include <asm/arch/regs-base.h> #define CONFIG_SYS_NO_FLASH -#define CONFIG_SYS_ICACHE_OFF -#define CONFIG_SYS_DCACHE_OFF #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_ARCH_CPU_INIT #define CONFIG_ARCH_MISC_INIT diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h index afc4a855bf..de19e38deb 100644 --- a/include/configs/seaboard.h +++ b/include/configs/seaboard.h @@ -27,7 +27,7 @@ #include <asm/sizes.h> /* LP0 suspend / resume */ -#define CONFIG_TEGRA20_LP0 +#define CONFIG_TEGRA_LP0 #define CONFIG_AES #define CONFIG_TEGRA_PMU #define CONFIG_TPS6586X_POWER @@ -42,11 +42,11 @@ /* High-level configuration options */ #define V_PROMPT "Tegra20 (SeaBoard) # " -#define CONFIG_TEGRA20_BOARD_STRING "NVIDIA Seaboard" +#define CONFIG_TEGRA_BOARD_STRING "NVIDIA Seaboard" /* Board-specific serial config */ #define CONFIG_SERIAL_MULTI -#define CONFIG_TEGRA20_ENABLE_UARTD +#define CONFIG_TEGRA_ENABLE_UARTD #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE /* On Seaboard: GPIO_PI3 = Port I = 8, bit = 3 */ @@ -77,8 +77,9 @@ /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_ENV_IS_IN_MMC -#define CONFIG_ENV_OFFSET ((2 * 512 * 1024) - CONFIG_ENV_SIZE) +#define CONFIG_ENV_OFFSET ((512 * 1024) - CONFIG_ENV_SIZE) #define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_SYS_MMC_ENV_PART 2 /* USB Host support */ #define CONFIG_USB_EHCI @@ -95,14 +96,23 @@ #define CONFIG_CMD_DHCP /* Enable keyboard */ -#define CONFIG_TEGRA20_KEYBOARD +#define CONFIG_TEGRA_KEYBOARD #define CONFIG_KEYBOARD -#undef TEGRA20_DEVICE_SETTINGS -#define TEGRA20_DEVICE_SETTINGS "stdin=serial,tegra-kbc\0" \ - "stdout=serial\0" \ - "stderr=serial\0" +#undef TEGRA_DEVICE_SETTINGS +#define TEGRA_DEVICE_SETTINGS "stdin=serial,tegra-kbc\0" \ + "stdout=serial\0" \ + "stderr=serial\0" -#include "tegra20-common-post.h" +#include "tegra-common-post.h" +/* NAND support */ +#define CONFIG_CMD_NAND +#define CONFIG_TEGRA_NAND + +/* Max number of NAND devices */ +#define CONFIG_SYS_MAX_NAND_DEVICE 1 + +/* Somewhat oddly, the NAND base address must be a config option */ +#define CONFIG_SYS_NAND_BASE NV_PA_NAND_BASE #endif /* __CONFIG_H */ diff --git a/include/configs/tec.h b/include/configs/tec.h index 9b3f88dff8..d5da3c7a88 100644 --- a/include/configs/tec.h +++ b/include/configs/tec.h @@ -35,24 +35,32 @@ /* High-level configuration options */ #define V_PROMPT "Tegra20 (TEC) # " -#define CONFIG_TEGRA20_BOARD_STRING "Avionic Design Tamonten Evaluation Carrier" +#define CONFIG_TEGRA_BOARD_STRING "Avionic Design Tamonten Evaluation Carrier" #define CONFIG_SYS_BOARD_ODMDATA 0x2b0d8011 /* Board-specific serial config */ #define CONFIG_SERIAL_MULTI -#define CONFIG_TEGRA20_ENABLE_UARTD /* UARTD: debug UART */ +#define CONFIG_TEGRA_ENABLE_UARTD /* UARTD: debug UART */ #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE #define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_ENV_IS_NOWHERE - /* SD/MMC */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC #define CONFIG_TEGRA_MMC #define CONFIG_CMD_MMC +/* NAND support */ +#define CONFIG_CMD_NAND +#define CONFIG_TEGRA_NAND +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE NV_PA_NAND_BASE + +/* Environment in NAND, aligned to start of last sector */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET (SZ_512M - SZ_128K) /* 128K sectors */ + /* USB host support */ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA @@ -79,6 +87,6 @@ "ext2load mmc 0 0x17000000 /boot/uImage;" \ "bootm" -#include "tegra20-common-post.h" +#include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/tegra20-common-post.h b/include/configs/tegra-common-post.h index 42f270f7bc..168b64be52 100644 --- a/include/configs/tegra20-common-post.h +++ b/include/configs/tegra-common-post.h @@ -21,8 +21,8 @@ * MA 02111-1307 USA */ -#ifndef __TEGRA20_COMMON_POST_H -#define __TEGRA20_COMMON_POST_H +#ifndef __TEGRA_COMMON_POST_H +#define __TEGRA_COMMON_POST_H #ifdef CONFIG_BOOTCOMMAND @@ -141,7 +141,7 @@ #endif #define CONFIG_EXTRA_ENV_SETTINGS \ - TEGRA20_DEVICE_SETTINGS \ + TEGRA_DEVICE_SETTINGS \ "fdt_load=0x01000000\0" \ "fdt_high=01100000\0" \ BOOTCMDS_COMMON @@ -174,8 +174,8 @@ #ifdef CONFIG_GENERIC_MMC #undef CONFIG_GENERIC_MMC #endif -#ifdef CONFIG_TEGRA20_MMC -#undef CONFIG_TEGRA20_MMC +#ifdef CONFIG_TEGRA_MMC +#undef CONFIG_TEGRA_MMC #endif #ifdef CONFIG_CMD_MMC #undef CONFIG_CMD_MMC @@ -211,4 +211,4 @@ #endif /* CONFIG_SPL_BUILD */ -#endif /* __TEGRA20_COMMON_POST_H */ +#endif /* __TEGRA_COMMON_POST_H */ diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h index 4c02f20543..098cdb4460 100644 --- a/include/configs/tegra20-common.h +++ b/include/configs/tegra20-common.h @@ -54,7 +54,7 @@ #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_OF_LIBFDT /* enable passing of devicetree */ -#ifdef CONFIG_TEGRA20_LP0 +#ifdef CONFIG_TEGRA_LP0 #define TEGRA_LP0_ADDR 0x1C406000 #define TEGRA_LP0_SIZE 0x2000 #define TEGRA_LP0_VEC \ @@ -132,9 +132,9 @@ /* Environment information, boards can override if required */ #define CONFIG_CONSOLE_MUX #define CONFIG_SYS_CONSOLE_IS_IN_ENV -#define TEGRA20_DEVICE_SETTINGS "stdin=serial\0" \ - "stdout=serial\0" \ - "stderr=serial\0" +#define TEGRA_DEVICE_SETTINGS "stdin=serial\0" \ + "stdout=serial\0" \ + "stderr=serial\0" #define CONFIG_LOADADDR 0x408000 /* def. location for kernel */ #define CONFIG_BOOTDELAY 2 /* -1 to disable auto boot */ @@ -157,7 +157,7 @@ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) -#define CONFIG_SYS_MEMTEST_START (TEGRA20_SDRC_CS0 + 0x600000) +#define CONFIG_SYS_MEMTEST_START (NV_PA_SDRC_CS0 + 0x600000) #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000) #define CONFIG_SYS_LOAD_ADDR (0xA00800) /* default */ @@ -169,7 +169,7 @@ * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 TEGRA20_SDRC_CS0 +#define PHYS_SDRAM_1 NV_PA_SDRC_CS0 #define PHYS_SDRAM_1_SIZE 0x20000000 /* 512M */ #define CONFIG_SYS_TEXT_BASE 0x0010c000 @@ -201,4 +201,6 @@ #define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/tegra20/u-boot-spl.lds" +#define CONFIG_SYS_NAND_SELF_INIT + #endif /* __TEGRA20_COMMON_H */ diff --git a/include/configs/trimslice.h b/include/configs/trimslice.h index b3c524981f..a46890c094 100644 --- a/include/configs/trimslice.h +++ b/include/configs/trimslice.h @@ -34,12 +34,12 @@ /* High-level configuration options */ #define V_PROMPT "Tegra20 (TrimSlice) # " -#define CONFIG_TEGRA20_BOARD_STRING "Compulab Trimslice" +#define CONFIG_TEGRA_BOARD_STRING "Compulab Trimslice" /* Board-specific serial config */ #define CONFIG_SERIAL_MULTI -#define CONFIG_TEGRA20_ENABLE_UARTA -#define CONFIG_TEGRA20_UARTA_GPU +#define CONFIG_TEGRA_ENABLE_UARTA +#define CONFIG_TEGRA_UARTA_GPU #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE #define CONFIG_MACH_TYPE MACH_TYPE_TRIMSLICE @@ -94,6 +94,6 @@ #define CONFIG_CMD_NET #define CONFIG_CMD_DHCP -#include "tegra20-common-post.h" +#include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/tt01.h b/include/configs/tt01.h index cc68a42e86..f46efa55f1 100644 --- a/include/configs/tt01.h +++ b/include/configs/tt01.h @@ -31,8 +31,6 @@ /* High Level Configuration Options */ #define CONFIG_ARM1136 #define CONFIG_MX31 -#define CONFIG_MX31_HCLK_FREQ 26000000 -#define CONFIG_MX31_CLK32 32768 #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO diff --git a/include/configs/ventana.h b/include/configs/ventana.h index 25ec2ebfec..7d3a54f743 100644 --- a/include/configs/ventana.h +++ b/include/configs/ventana.h @@ -34,11 +34,11 @@ /* High-level configuration options */ #define V_PROMPT "Tegra20 (Ventana) # " -#define CONFIG_TEGRA20_BOARD_STRING "NVIDIA Ventana" +#define CONFIG_TEGRA_BOARD_STRING "NVIDIA Ventana" /* Board-specific serial config */ #define CONFIG_SERIAL_MULTI -#define CONFIG_TEGRA20_ENABLE_UARTD +#define CONFIG_TEGRA_ENABLE_UARTD #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE #define CONFIG_MACH_TYPE MACH_TYPE_VENTANA @@ -58,8 +58,9 @@ /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_ENV_IS_IN_MMC -#define CONFIG_ENV_OFFSET ((2 * 1024 * 1024) - CONFIG_ENV_SIZE) +#define CONFIG_ENV_OFFSET ((1024 * 1024) - CONFIG_ENV_SIZE) #define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_SYS_MMC_ENV_PART 2 /* USB Host support */ #define CONFIG_USB_EHCI @@ -75,6 +76,6 @@ #define CONFIG_CMD_NET #define CONFIG_CMD_DHCP -#include "tegra20-common-post.h" +#include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/whistler.h b/include/configs/whistler.h index b747d0e2b2..6c565bae14 100644 --- a/include/configs/whistler.h +++ b/include/configs/whistler.h @@ -34,12 +34,12 @@ /* High-level configuration options */ #define V_PROMPT "Tegra20 (Whistler) # " -#define CONFIG_TEGRA20_BOARD_STRING "NVIDIA Whistler" +#define CONFIG_TEGRA_BOARD_STRING "NVIDIA Whistler" /* Board-specific serial config */ #define CONFIG_SERIAL_MULTI -#define CONFIG_TEGRA20_ENABLE_UARTA -#define CONFIG_TEGRA20_UARTA_UAA_UAB +#define CONFIG_TEGRA_ENABLE_UARTA +#define CONFIG_TEGRA_UARTA_UAA_UAB #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE #define CONFIG_MACH_TYPE MACH_TYPE_WHISTLER @@ -72,8 +72,9 @@ * particular card is standard practice as far as I know. */ #define CONFIG_ENV_IS_IN_MMC -#define CONFIG_ENV_OFFSET ((2 * 512 * 1024) - CONFIG_ENV_SIZE) +#define CONFIG_ENV_OFFSET ((512 * 1024) - CONFIG_ENV_SIZE) #define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_SYS_MMC_ENV_PART 2 /* USB Host support */ #define CONFIG_USB_EHCI @@ -89,6 +90,6 @@ #define CONFIG_CMD_NET #define CONFIG_CMD_DHCP -#include "tegra20-common-post.h" +#include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/zmx25.h b/include/configs/zmx25.h index 072945ad4a..447683a490 100644 --- a/include/configs/zmx25.h +++ b/include/configs/zmx25.h @@ -28,7 +28,6 @@ #define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_MX25 -#define CONFIG_MX25_CLK32 32768 /* OSC32K frequency */ #define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_TEXT_BASE 0xA0000000 diff --git a/include/fdtdec.h b/include/fdtdec.h index a8f783ffd5..474a4b90ef 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -63,6 +63,7 @@ enum fdt_compat_id { COMPAT_NVIDIA_TEGRA20_EMC, /* Tegra20 memory controller */ COMPAT_NVIDIA_TEGRA20_EMC_TABLE, /* Tegra20 memory timing table */ COMPAT_NVIDIA_TEGRA20_KBC, /* Tegra20 Keyboard */ + COMPAT_NVIDIA_TEGRA20_NAND, /* Tegra2 NAND controller */ COMPAT_COUNT, }; diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 82704de083..dc839e7153 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -391,9 +391,10 @@ struct nand_ecc_ctrl { * consecutive order. */ struct nand_buffers { - uint8_t ecccalc[NAND_MAX_OOBSIZE]; - uint8_t ecccode[NAND_MAX_OOBSIZE]; - uint8_t databuf[NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE]; + uint8_t ecccalc[ALIGN(NAND_MAX_OOBSIZE, ARCH_DMA_MINALIGN)]; + uint8_t ecccode[ALIGN(NAND_MAX_OOBSIZE, ARCH_DMA_MINALIGN)]; + uint8_t databuf[ALIGN(NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE, + ARCH_DMA_MINALIGN)]; }; /** diff --git a/include/mmc.h b/include/mmc.h index 7546b4a6c8..b63b2c32a0 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -160,6 +160,7 @@ #define EXT_CSD_CARD_TYPE 196 /* RO */ #define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */ #define EXT_CSD_HC_ERASE_GRP_SIZE 224 /* RO */ +#define EXT_CSD_BOOT_MULT 226 /* RO */ /* * EXT_CSD field definitions |
