diff options
Diffstat (limited to 'include')
58 files changed, 190 insertions, 77 deletions
diff --git a/include/asm-microblaze/byteorder.h b/include/asm-microblaze/byteorder.h index 51cacb048b..a4a75b7a6d 100644 --- a/include/asm-microblaze/byteorder.h +++ b/include/asm-microblaze/byteorder.h @@ -27,7 +27,9 @@ I think this is a symptom of a bug in mb-gcc. JW 20040303 */ -static __inline__ __const__ __u16 ___arch__swab16 (__u16 half_word) + + +static __inline__ __u16 ___arch__swab16 (__u16 half_word) { /* 32 bit temp to cast result, forcing clearing of high word */ __u32 temp; diff --git a/include/asm-ppc/config.h b/include/asm-ppc/config.h index ca143c7fef..c9ba805077 100644 --- a/include/asm-ppc/config.h +++ b/include/asm-ppc/config.h @@ -29,10 +29,11 @@ #endif #endif -#ifndef CONFIG_FSL_DMA -#if ((!defined CONFIG_MPC83xx && defined(CONFIG_DDR_ECC) && \ - !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)) || \ - (defined(CONFIG_MPC83xx) && defined(CONFIG_DDR_ECC_INIT_VIA_DMA))) +/* Check if boards need to enable FSL DMA engine for SDRAM init */ +#if !defined(CONFIG_FSL_DMA) && defined(CONFIG_DDR_ECC) +#if (defined(CONFIG_MPC83xx) && defined(CONFIG_DDR_ECC_INIT_VIA_DMA)) || \ + ((defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)) && \ + !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)) #define CONFIG_FSL_DMA #endif #endif diff --git a/include/config_cmd_default.h b/include/config_cmd_default.h index 0376e44bd3..a5d87a68e8 100644 --- a/include/config_cmd_default.h +++ b/include/config_cmd_default.h @@ -20,14 +20,13 @@ #define CONFIG_CMD_BOOTD /* bootd */ #define CONFIG_CMD_CONSOLE /* coninfo */ #define CONFIG_CMD_ECHO /* echo arguments */ -#define CONFIG_CMD_SAVEENV /* saveenv */ -#define CONFIG_CMD_FLASH /* flinfo, erase, protect */ #define CONFIG_CMD_FPGA /* FPGA configuration Support */ #define CONFIG_CMD_IMI /* iminfo */ +#define CONFIG_CMD_ITEST /* Integer (and string) test */ #ifndef CONFIG_SYS_NO_FLASH +#define CONFIG_CMD_FLASH /* flinfo, erase, protect */ #define CONFIG_CMD_IMLS /* List all found images */ #endif -#define CONFIG_CMD_ITEST /* Integer (and string) test */ #define CONFIG_CMD_LOADB /* loadb */ #define CONFIG_CMD_LOADS /* loads */ #define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop mtest */ @@ -35,6 +34,7 @@ #define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ #define CONFIG_CMD_NFS /* NFS support */ #define CONFIG_CMD_RUN /* run command in env variable */ +#define CONFIG_CMD_SAVEENV /* saveenv */ #define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */ #define CONFIG_CMD_SOURCE /* "source" command support */ #define CONFIG_CMD_XIMG /* Load part of Multi Image */ diff --git a/include/configs/ASH405.h b/include/configs/ASH405.h index 2ee4f809d0..694a87b970 100644 --- a/include/configs/ASH405.h +++ b/include/configs/ASH405.h @@ -157,8 +157,10 @@ #define CONFIG_SYS_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ #define CONFIG_SYS_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ -#define CONFIG_SYS_NAND_QUIET 1 +#define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ +#define CONFIG_SYS_NAND_QUIET 1 + +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ /*----------------------------------------------------------------------- * PCI stuff diff --git a/include/configs/AmigaOneG3SE.h b/include/configs/AmigaOneG3SE.h index fe04f27a17..0dfb23b310 100644 --- a/include/configs/AmigaOneG3SE.h +++ b/include/configs/AmigaOneG3SE.h @@ -363,7 +363,7 @@ #define CONFIG_USB_UHCI 1 #define CONFIG_USB_STORAGE 1 #define CONFIG_USB_KEYBOARD 1 -#define CONFIG_SYS_DEVICE_DEREGISTER 1 /* needed by CONFIG_USB_KEYBOARD */ +#define CONFIG_SYS_STDIO_DEREGISTER 1 /* needed by CONFIG_USB_KEYBOARD */ /* * Autoboot stuff diff --git a/include/configs/CMS700.h b/include/configs/CMS700.h index ae8494d577..2384925a27 100644 --- a/include/configs/CMS700.h +++ b/include/configs/CMS700.h @@ -165,6 +165,8 @@ #define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ #define CONFIG_SYS_NAND_QUIET 1 +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ + /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is diff --git a/include/configs/HH405.h b/include/configs/HH405.h index 92335239df..1a2266ff7b 100644 --- a/include/configs/HH405.h +++ b/include/configs/HH405.h @@ -219,6 +219,8 @@ #define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ #define CONFIG_SYS_NAND_QUIET 1 +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ + /*----------------------------------------------------------------------- * PCI stuff *----------------------------------------------------------------------- diff --git a/include/configs/HUB405.h b/include/configs/HUB405.h index ea502d42cd..518d94d61a 100644 --- a/include/configs/HUB405.h +++ b/include/configs/HUB405.h @@ -160,6 +160,8 @@ #define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ #define CONFIG_SYS_NAND_QUIET 1 +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ + /*----------------------------------------------------------------------- * PCI stuff *----------------------------------------------------------------------- diff --git a/include/configs/IDS8247.h b/include/configs/IDS8247.h index 51e012cc46..4c4af054b2 100644 --- a/include/configs/IDS8247.h +++ b/include/configs/IDS8247.h @@ -265,6 +265,8 @@ #define CONFIG_SYS_NAND0_BASE 0xE1000000 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ + #endif /* CONFIG_CMD_NAND */ /*----------------------------------------------------------------------- diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h index 264e0e7c63..7ac9342251 100644 --- a/include/configs/MIP405.h +++ b/include/configs/MIP405.h @@ -405,7 +405,7 @@ #define CONFIG_USB_STORAGE /* Enable needed helper functions */ -#define CONFIG_SYS_DEVICE_DEREGISTER /* needs device_deregister */ +#define CONFIG_SYS_STDIO_DEREGISTER /* needs stdio_deregister */ #endif /************************************************************ * Debug support diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index 807a534316..91327188ba 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -230,7 +230,6 @@ #endif #define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */ -#define CONFIG_SYS_MONITOR_LEN (320 * 1024) /* Reserve 320 kB for Mon */ #define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */ /* diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index 2f40ef48c9..a3b5c7c3d3 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -317,7 +317,7 @@ #define CONFIG_PCI_OHCI 1 #define CONFIG_USB_OHCI_NEW 1 #define CONFIG_USB_KEYBOARD 1 -#define CONFIG_SYS_DEVICE_DEREGISTER +#define CONFIG_SYS_STDIO_DEREGISTER #define CONFIG_SYS_USB_EVENT_POLL 1 #define CONFIG_SYS_USB_OHCI_SLOT_NAME "ohci_pci" #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 60ce0f3aca..955ac3dfa6 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -391,7 +391,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_PCI_OHCI 1 #define CONFIG_USB_OHCI_NEW 1 #define CONFIG_USB_KEYBOARD 1 -#define CONFIG_SYS_DEVICE_DEREGISTER +#define CONFIG_SYS_STDIO_DEREGISTER #define CONFIG_SYS_USB_EVENT_POLL 1 #define CONFIG_SYS_USB_OHCI_SLOT_NAME "ohci_pci" #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h index e15ed4aeb9..962b29e95b 100644 --- a/include/configs/PIP405.h +++ b/include/configs/PIP405.h @@ -357,7 +357,7 @@ #define CONFIG_USB_STORAGE /* Enable needed helper functions */ -#define CONFIG_SYS_DEVICE_DEREGISTER /* needs device_deregister */ +#define CONFIG_SYS_STDIO_DEREGISTER /* needs stdio_deregister */ /************************************************************ * Debug support diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h index 7f2337bac8..2e41526afe 100644 --- a/include/configs/PLU405.h +++ b/include/configs/PLU405.h @@ -183,6 +183,8 @@ #define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ #define CONFIG_SYS_NAND_QUIET 1 +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ + /* * PCI stuff */ diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h index 9e54bf8d7c..6fba0caad2 100644 --- a/include/configs/PPChameleonEVB.h +++ b/include/configs/PPChameleonEVB.h @@ -210,6 +210,9 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ + +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ + /* * nand device 1 on dave (PPChameleonEVB) needs more time, * so we just introduce additional wait in nand_wait(), diff --git a/include/configs/TQM8272.h b/include/configs/TQM8272.h index 9cac696b98..6c462af53c 100644 --- a/include/configs/TQM8272.h +++ b/include/configs/TQM8272.h @@ -439,6 +439,8 @@ WRITE_NAND(d, addr); \ } while(0) +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ + #endif /* CONFIG_CMD_NAND */ #define CONFIG_PCI diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h index d44fb07cc0..1fbf4bf492 100644 --- a/include/configs/TQM85xx.h +++ b/include/configs/TQM85xx.h @@ -372,6 +372,8 @@ #define NAND_BIG_DELAY_US 25 /* max tR for Samsung devices */ +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ + #endif /* CONFIG_NAND */ /* diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h index 0480913377..6051480254 100644 --- a/include/configs/VCMA9.h +++ b/include/configs/VCMA9.h @@ -129,7 +129,7 @@ #define CONFIG_DOS_PARTITION 1 /* Enable needed helper functions */ -#define CONFIG_SYS_DEVICE_DEREGISTER /* needs device_deregister */ +#define CONFIG_SYS_STDIO_DEREGISTER /* needs stdio_deregister */ /************************************************************ * RTC diff --git a/include/configs/VOH405.h b/include/configs/VOH405.h index 38a1d0deca..17397e8aab 100644 --- a/include/configs/VOH405.h +++ b/include/configs/VOH405.h @@ -169,6 +169,8 @@ #define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ #define CONFIG_SYS_NAND_QUIET 1 +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ + /*----------------------------------------------------------------------- * PCI stuff *----------------------------------------------------------------------- diff --git a/include/configs/WUH405.h b/include/configs/WUH405.h index 5c281a1a66..dbfa1aae9f 100644 --- a/include/configs/WUH405.h +++ b/include/configs/WUH405.h @@ -157,6 +157,8 @@ #define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ + /*----------------------------------------------------------------------- * PCI stuff *----------------------------------------------------------------------- diff --git a/include/configs/acadia.h b/include/configs/acadia.h index 9ffd86b1ac..b71010769f 100644 --- a/include/configs/acadia.h +++ b/include/configs/acadia.h @@ -265,6 +265,8 @@ #define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS) #define CONFIG_SYS_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */ +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ + /*----------------------------------------------------------------------- * External Bus Controller (EBC) Setup *----------------------------------------------------------------------*/ diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h index c5134a2140..8a1c4f592e 100644 --- a/include/configs/afeb9260.h +++ b/include/configs/afeb9260.h @@ -106,6 +106,8 @@ #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 + +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif /* NOR flash - no real flash on this board */ diff --git a/include/configs/apollon.h b/include/configs/apollon.h index fa5a7a9e22..575f60e166 100644 --- a/include/configs/apollon.h +++ b/include/configs/apollon.h @@ -256,6 +256,8 @@ #define CONFIG_ENV_IS_IN_ONENAND 1 #define CONFIG_ENV_ADDR 0x00020000 +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ + #ifdef CONFIG_SYS_USE_UBI #define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "onenand0=onenand" diff --git a/include/configs/at91cap9adk.h b/include/configs/at91cap9adk.h index 526cd60ae0..df7366120b 100644 --- a/include/configs/at91cap9adk.h +++ b/include/configs/at91cap9adk.h @@ -123,7 +123,6 @@ /* our CLE is AD22 */ #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15 -#endif /* NAND flash */ #ifdef CONFIG_CMD_NAND @@ -132,6 +131,9 @@ #define CONFIG_SYS_NAND_BASE 0x40000000 #define CONFIG_SYS_NAND_DBW_8 1 +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ +#endif + /* Ethernet */ #define CONFIG_MACB 1 #define CONFIG_RMII 1 diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index 1828c63afd..7eef9a38ef 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -122,6 +122,8 @@ #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 + +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif /* NOR flash - no real flash on this board */ diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index 6d240230db..028a04f323 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -132,6 +132,8 @@ #define CONFIG_SYS_NAND_MASK_CLE (1 << 21) #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC15 + +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif /* NOR flash - no real flash on this board */ diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h index 00f3114fb5..9539d18f6f 100644 --- a/include/configs/at91sam9263ek.h +++ b/include/configs/at91sam9263ek.h @@ -266,6 +266,8 @@ #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PA22 + +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif /* Ethernet */ diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index 572c45bfb0..af97afe2b1 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -118,6 +118,7 @@ /* NOR flash, if populated */ #ifndef CONFIG_CMD_NAND #define CONFIG_SYS_NO_FLASH 1 +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #else #define CONFIG_SYS_FLASH_CFI 1 #define CONFIG_FLASH_CFI_DRIVER 1 @@ -140,6 +141,8 @@ #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC8 + +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif /* Ethernet */ diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h index c4668236c2..bc2a32bed9 100644 --- a/include/configs/at91sam9rlek.h +++ b/include/configs/at91sam9rlek.h @@ -118,6 +118,8 @@ #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PB6 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD17 + +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif /* Ethernet - not present */ diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h index 9cb9838b5a..79095694ad 100644 --- a/include/configs/davinci_schmoogie.h +++ b/include/configs/davinci_schmoogie.h @@ -93,6 +93,7 @@ #define CONFIG_SYS_NAND_HW_ECC #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */ +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ /*=====================*/ /* Board related stuff */ /*=====================*/ diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h index a47620fca8..531baf1af9 100644 --- a/include/configs/davinci_sffsdr.h +++ b/include/configs/davinci_sffsdr.h @@ -88,6 +88,7 @@ #define CONFIG_SYS_NAND_HW_ECC #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */ +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ /* I2C switch definitions for PCA9543 chip */ #define CONFIG_SYS_I2C_PCA9543_ADDR 0x70 #define CONFIG_SYS_I2C_PCA9543_ADDR_LEN 0 /* Single register. */ diff --git a/include/configs/delta.h b/include/configs/delta.h index 9c46c5bdbc..95e04f9e4a 100644 --- a/include/configs/delta.h +++ b/include/configs/delta.h @@ -226,6 +226,8 @@ #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND0_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ + /* nand timeout values */ #define CONFIG_SYS_NAND_PROG_ERASE_TO 3000 #define CONFIG_SYS_NAND_OTHER_TO 100 diff --git a/include/configs/gr_ep2s60.h b/include/configs/gr_ep2s60.h index 6f58bac91f..7b0a08ff01 100644 --- a/include/configs/gr_ep2s60.h +++ b/include/configs/gr_ep2s60.h @@ -87,7 +87,7 @@ #define CONFIG_CMD_USB #define CONFIG_USB_STORAGE /* Enable needed helper functions */ -#define CONFIG_SYS_DEVICE_DEREGISTER /* needs device_deregister */ +#define CONFIG_SYS_STDIO_DEREGISTER /* needs stdio_deregister */ #endif /* diff --git a/include/configs/kilauea.h b/include/configs/kilauea.h index 97bac99597..df1b0612ce 100644 --- a/include/configs/kilauea.h +++ b/include/configs/kilauea.h @@ -217,6 +217,8 @@ #define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS) #define CONFIG_SYS_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */ +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ + /*----------------------------------------------------------------------- * DDR SDRAM *----------------------------------------------------------------------*/ diff --git a/include/configs/meesc.h b/include/configs/meesc.h index 28c4de0217..825317201d 100644 --- a/include/configs/meesc.h +++ b/include/configs/meesc.h @@ -119,6 +119,8 @@ #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PA22 + +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif /* Ethernet */ diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h index 3225ce714c..ac678d0b60 100644 --- a/include/configs/mp2usb.h +++ b/include/configs/mp2usb.h @@ -216,7 +216,7 @@ #define CONFIG_SYS_MAXARGS 32 /* max number of command args */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_DEVICE_DEREGISTER /* needs device_deregister */ +#define CONFIG_SYS_STDIO_DEREGISTER /* needs stdio_deregister */ #define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK/2) /* AT91C_TC0_CMR is implicitly set to */ diff --git a/include/configs/netstar.h b/include/configs/netstar.h index 5062cdb167..f0b420781e 100644 --- a/include/configs/netstar.h +++ b/include/configs/netstar.h @@ -110,6 +110,8 @@ #define CONFIG_SYS_NAND_BASE 0x04000000 + (2 << 23) #define NAND_ALLOW_ERASE_ALL 1 +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ + #define CONFIG_HARD_I2C #define CONFIG_SYS_I2C_SPEED 100000 #define CONFIG_SYS_I2C_SLAVE 1 diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index c2bd7e67e3..a1a849e292 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -142,6 +142,7 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */ +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #define CONFIG_JFFS2_NAND /* nand device jffs2 lives on */ diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index e205c01b4b..198c3d1fd2 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -138,6 +138,7 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */ /* NAND devices */ +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #define CONFIG_JFFS2_NAND /* nand device jffs2 lives on */ diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index 89023128cf..3bf798a400 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -128,6 +128,8 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */ +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ + #define CONFIG_JFFS2_NAND /* nand device jffs2 lives on */ #define CONFIG_JFFS2_DEV "nand0" diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h index dbd4dcc030..d7e0ea1c44 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -132,6 +132,8 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */ +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ + #define CONFIG_JFFS2_NAND /* nand device jffs2 lives on */ #define CONFIG_JFFS2_DEV "nand0" diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index 9e000ed1c2..4034ea4291 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -138,6 +138,9 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */ + +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ + #define CONFIG_JFFS2_NAND /* nand device jffs2 lives on */ #define CONFIG_JFFS2_DEV "nand0" diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h index c2ad5bf199..701a296b3d 100644 --- a/include/configs/omap3_zoom2.h +++ b/include/configs/omap3_zoom2.h @@ -158,6 +158,8 @@ #define GPMC_NAND_ECC_LP_x16_LAYOUT 1 #define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ + /* Environment information */ #define CONFIG_BOOTDELAY 10 diff --git a/include/configs/pdnb3.h b/include/configs/pdnb3.h index 1255f21e8b..2612165cb7 100644 --- a/include/configs/pdnb3.h +++ b/include/configs/pdnb3.h @@ -265,7 +265,8 @@ * NAND-FLASH stuff */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE 0x51000000 /* NAND FLASH Base Address */ +#define CONFIG_SYS_NAND_BASE 0x51000000 /* NAND FLASH Base Address */ +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif /* diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h index 4784c40d46..315d7f8779 100644 --- a/include/configs/pm9261.h +++ b/include/configs/pm9261.h @@ -236,6 +236,8 @@ #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PA16 +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ + /* NOR flash */ #define CONFIG_SYS_FLASH_CFI 1 diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h index 94e1eb9d8a..f8197b1f84 100644 --- a/include/configs/pm9263.h +++ b/include/configs/pm9263.h @@ -258,6 +258,8 @@ #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PB30 + +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif #define CONFIG_CMD_JFFS2 1 diff --git a/include/configs/quad100hd.h b/include/configs/quad100hd.h index 3ea854becf..d63c43e932 100644 --- a/include/configs/quad100hd.h +++ b/include/configs/quad100hd.h @@ -225,6 +225,8 @@ #define CONFIG_SYS_NAND_CLE 31 /* our CLE is GPIO31 */ #define CONFIG_SYS_NAND_ALE 30 /* our ALE is GPIO30 */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 + +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif /*----------------------------------------------------------------------- diff --git a/include/configs/sc3.h b/include/configs/sc3.h index 97e1da22bb..7e00ab8c71 100644 --- a/include/configs/sc3.h +++ b/include/configs/sc3.h @@ -426,6 +426,7 @@ extern unsigned long offsetOfEnvironment; #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x77D00000 +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #define CONFIG_JFFS2_NAND 1 /* jffs2 on nand support */ diff --git a/include/configs/smdk6400.h b/include/configs/smdk6400.h index 018f576ef2..ddc8e7174a 100644 --- a/include/configs/smdk6400.h +++ b/include/configs/smdk6400.h @@ -269,6 +269,8 @@ 48, 49, 50, 51, 52, 53, 54, 55, \ 56, 57, 58, 59, 60, 61, 62, 63} +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ + /* Boot configuration (define only one of next 3) */ #define CONFIG_BOOT_NAND /* None of these are currently implemented. Left from the original Samsung diff --git a/include/configs/socrates.h b/include/configs/socrates.h index 5b91b4d7c7..35feed0fe1 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -188,6 +188,8 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_CMD_NAND +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ + /* LIME GDC */ #define CONFIG_SYS_LIME_BASE 0xc8000000 #define CONFIG_SYS_LIME_SIZE 0x04000000 /* 64 MB */ diff --git a/include/configs/zylonite.h b/include/configs/zylonite.h index 05000429b6..86b6ea1e18 100644 --- a/include/configs/zylonite.h +++ b/include/configs/zylonite.h @@ -205,6 +205,8 @@ #define CONFIG_SYS_NAND_SENDCMD_RETRY 3 #undef NAND_ALLOW_ERASE_ALL /* Allow erasing bad blocks - don't use */ +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ + /* NAND Timing Parameters (in ns) */ #define NAND_TIMING_tCH 10 #define NAND_TIMING_tCS 0 diff --git a/include/console.h b/include/console.h deleted file mode 100644 index bc8b139507..0000000000 --- a/include/console.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * (C) Copyright 2000 - * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _CONSOLE_H_ -#define _CONSOLE_H_ - -#include <devices.h> - -/* -** VARIABLES -*/ - -extern device_t *stdio_devices[] ; -extern char *stdio_names[MAX_FILES] ; - -#endif diff --git a/include/iomux.h b/include/iomux.h index 257c1f7612..e38a81e775 100644 --- a/include/iomux.h +++ b/include/iomux.h @@ -24,7 +24,7 @@ #ifndef _IO_MUX_H #define _IO_MUX_H -#include <devices.h> +#include <stdio_dev.h> /* * Stuff required to support console multiplexing. @@ -34,7 +34,7 @@ * Pointers to devices used for each file type. Defined in console.c * but storage is allocated in iomux.c. */ -extern device_t **console_devices[MAX_FILES]; +extern struct stdio_dev **console_devices[MAX_FILES]; /* * The count of devices assigned to each FILE. Defined in console.c * and populated in iomux.c. @@ -43,6 +43,6 @@ extern int cd_count[MAX_FILES]; int iomux_doenv(const int, const char *); void iomux_printdevs(const int); -device_t *search_device(int, char *); +struct stdio_dev *search_device(int, char *); #endif /* _IO_MUX_H */ diff --git a/include/mb862xx.h b/include/mb862xx.h index 164305fbb7..43f01e7d9c 100644 --- a/include/mb862xx.h +++ b/include/mb862xx.h @@ -32,6 +32,75 @@ #define PCI_DEVICE_ID_CORAL_P 0x2019 #define PCI_DEVICE_ID_CORAL_PA 0x201E +#define GC_HOST_BASE 0x01fc0000 +#define GC_DISP_BASE 0x01fd0000 +#define GC_DRAW_BASE 0x01ff0000 + +/* Host interface registers */ +#define GC_SRST 0x0000002c +#define GC_CCF 0x00000038 +#define GC_MMR 0x0000fffc + +/* + * Display Controller registers + * _A means the offset is aligned, we use these for boards + * with 8-/16-bit GDC access not working or buggy. + */ +#define GC_DCM0 0x00000000 +#define GC_HTP_A 0x00000004 +#define GC_HTP 0x00000006 +#define GC_HDB_HDP_A 0x00000008 +#define GC_HDP 0x00000008 +#define GC_HDB 0x0000000a +#define GC_VSW_HSW_HSP_A 0x0000000c +#define GC_HSP 0x0000000c +#define GC_HSW 0x0000000e +#define GC_VSW 0x0000000f +#define GC_VTR_A 0x00000010 +#define GC_VTR 0x00000012 +#define GC_VDP_VSP_A 0x00000014 +#define GC_VSP 0x00000014 +#define GC_VDP 0x00000016 +#define GC_WY_WX 0x00000018 +#define GC_WH_WW 0x0000001c +#define GC_L0M 0x00000020 +#define GC_L0OA0 0x00000024 +#define GC_L0DA0 0x00000028 +#define GC_L0DY_L0DX 0x0000002c +#define GC_L2M 0x00000040 +#define GC_L2OA0 0x00000044 +#define GC_L2DA0 0x00000048 +#define GC_L2OA1 0x0000004c +#define GC_L2DA1 0x00000050 +#define GC_L2DX 0x00000054 +#define GC_L2DY 0x00000056 +#define GC_DCM1 0x00000100 +#define GC_DCM2 0x00000104 +#define GC_DCM3 0x00000108 +#define GC_L0EM 0x00000110 +#define GC_L0WY_L0WX 0x00000114 +#define GC_L0WH_L0WW 0x00000118 +#define GC_L2EM 0x00000130 +#define GC_L2WX 0x00000134 +#define GC_L2WY 0x00000136 +#define GC_L2WW 0x00000138 +#define GC_L2WH 0x0000013a +#define GC_L0PAL0 0x00000400 + +/* Drawing registers */ +#define GC_CTR 0x00000400 +#define GC_IFCNT 0x00000408 +#define GC_FBR 0x00000440 +#define GC_XRES 0x00000444 +#define GC_CXMIN 0x00000454 +#define GC_CXMAX 0x00000458 +#define GC_CYMIN 0x0000045c +#define GC_CYMAX 0x00000460 +#define GC_FC 0x00000480 +#define GC_BC 0x00000484 +#define GC_FIFO 0x000004a0 +#define GC_GEO_FIFO 0x00008400 + typedef struct { unsigned int index; unsigned int value; diff --git a/include/netdev.h b/include/netdev.h index aed5c4cce3..17fdafba83 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -73,6 +73,7 @@ int scc_initialize(bd_t *bis); int skge_initialize(bd_t *bis); int tsi108_eth_initialize(bd_t *bis); int uec_initialize(int index); +int uec_standard_init(bd_t *bis); int uli526x_initialize(bd_t *bis); int sh_eth_initialize(bd_t *bis); int dm9000_initialize(bd_t *bis); diff --git a/include/serial.h b/include/serial.h index 5722337269..821b58399d 100644 --- a/include/serial.h +++ b/include/serial.h @@ -55,7 +55,7 @@ extern struct serial_device serial_btuart_device; extern struct serial_device serial_stuart_device; extern void serial_initialize(void); -extern void serial_devices_init(void); +extern void serial_stdio_init(void); extern int serial_assign(char * name); extern void serial_reinit_all(void); diff --git a/include/devices.h b/include/stdio_dev.h index 3a9881bf04..8b06ccf005 100644 --- a/include/devices.h +++ b/include/stdio_dev.h @@ -12,7 +12,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -21,13 +21,13 @@ * MA 02111-1307 USA */ -#include <linux/list.h> +#ifndef _STDIO_DEV_H_ +#define _STDIO_DEV_H_ -#ifndef _DEVICES_H_ -#define _DEVICES_H_ +#include <linux/list.h> /* - * CONSOLE DEVICES + * STDIO DEVICES */ #define DEV_FLAGS_INPUT 0x00000001 /* Device can be used as input console */ @@ -36,7 +36,7 @@ #define DEV_EXT_VIDEO 0x00000001 /* Video extensions supported */ /* Device information */ -typedef struct { +struct stdio_dev { int flags; /* Device flags: input/output/system */ int ext; /* Supported extensions */ char name[16]; /* Device name */ @@ -60,7 +60,7 @@ typedef struct { void *priv; /* Private extensions */ struct list_head list; -} device_t; +}; /* * VIDEO EXTENSIONS @@ -83,20 +83,20 @@ typedef struct { /* * VARIABLES */ -extern device_t *stdio_devices[]; +extern struct stdio_dev *stdio_devices[]; extern char *stdio_names[MAX_FILES]; /* * PROTOTYPES */ -int device_register (device_t * dev); -int devices_init (void); -#ifdef CONFIG_SYS_DEVICE_DEREGISTER -int device_deregister(char *devname); +int stdio_register (struct stdio_dev * dev); +int stdio_init (void); +#ifdef CONFIG_SYS_STDIO_DEREGISTER +int stdio_deregister(char *devname); #endif -struct list_head* device_get_list(void); -device_t* device_get_by_name(char* name); -device_t* device_clone(device_t *dev); +struct list_head* stdio_get_list(void); +struct stdio_dev* stdio_get_by_name(char* name); +struct stdio_dev* stdio_clone(struct stdio_dev *dev); #ifdef CONFIG_ARM_DCC_MULTI int drv_arm_dcc_init(void); @@ -123,4 +123,4 @@ int drv_nc_init (void); int drv_jtag_console_init (void); #endif -#endif /* _DEVICES_H_ */ +#endif |
