diff options
Diffstat (limited to 'include')
114 files changed, 4742 insertions, 1029 deletions
diff --git a/include/ACEX1K.h b/include/ACEX1K.h index 6ea0eed952..354e0f0e47 100644 --- a/include/ACEX1K.h +++ b/include/ACEX1K.h @@ -77,6 +77,8 @@ typedef struct { #endif #define Altera_EP1K100_SIZE (166965*8) +#define Altera_EP2C8_SIZE 247942 +#define Altera_EP2C20_SIZE 586562 #define Altera_EP2C35_SIZE 883905 /* Descriptor Macros diff --git a/include/asm-arm/arch-at91sam9/at91_pmc.h b/include/asm-arm/arch-at91sam9/at91_pmc.h index 103be86999..b57875d798 100644 --- a/include/asm-arm/arch-at91sam9/at91_pmc.h +++ b/include/asm-arm/arch-at91sam9/at91_pmc.h @@ -96,4 +96,9 @@ #define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */ #define AT91_PMC_IMR (AT91_PMC + 0x6c) /* Interrupt Mask Register */ +#define AT91_PMC_PROT (AT91_PMC + 0xe4) /* Protect Register [AT91CAP9 revC only] */ +#define AT91_PMC_PROTKEY 0x504d4301 /* Activation Code */ + +#define AT91_PMC_VER (AT91_PMC + 0xfc) /* PMC Module Version [AT91CAP9 only] */ + #endif diff --git a/include/asm-arm/arch-at91sam9/at91cap9.h b/include/asm-arm/arch-at91sam9/at91cap9.h index d1b33a069a..0b52228138 100644 --- a/include/asm-arm/arch-at91sam9/at91cap9.h +++ b/include/asm-arm/arch-at91sam9/at91cap9.h @@ -101,13 +101,25 @@ #define AT91_RTT (0xfffffd20 - AT91_BASE_SYS) #define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) #define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) -#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS) +#define AT91_SCKCR (0xfffffd50 - AT91_BASE_SYS) +#define AT91_GPBR_REVB (0xfffffd50 - AT91_BASE_SYS) +#define AT91_GPBR_REVC (0xfffffd60 - AT91_BASE_SYS) #define AT91_USART0 AT91CAP9_BASE_US0 #define AT91_USART1 AT91CAP9_BASE_US1 #define AT91_USART2 AT91CAP9_BASE_US2 /* + * SCKCR flags + */ +#define AT91CAP9_SCKCR_RCEN (1 << 0) /* RC Oscillator Enable */ +#define AT91CAP9_SCKCR_OSC32EN (1 << 1) /* 32kHz Oscillator Enable */ +#define AT91CAP9_SCKCR_OSC32BYP (1 << 2) /* 32kHz Oscillator Bypass */ +#define AT91CAP9_SCKCR_OSCSEL (1 << 3) /* Slow Clock Selector */ +#define AT91CAP9_SCKCR_OSCSEL_RC (0 << 3) +#define AT91CAP9_SCKCR_OSCSEL_32 (1 << 3) + +/* * Internal Memory. */ #define AT91CAP9_SRAM_BASE 0x00100000 /* Internal SRAM base address */ diff --git a/include/asm-arm/arch-at91sam9/at91sam9261.h b/include/asm-arm/arch-at91sam9/at91sam9261.h new file mode 100644 index 0000000000..752d81dfe3 --- /dev/null +++ b/include/asm-arm/arch-at91sam9/at91sam9261.h @@ -0,0 +1,105 @@ +/* + * [origin: Linux kernel include/asm-arm/arch-at91/at91sam9261.h] + * + * Copyright (C) SAN People + * + * Common definitions. + * Based on AT91SAM9261 datasheet revision E. (Preliminary) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91SAM9261_H +#define AT91SAM9261_H + +/* + * Peripheral identifiers/interrupts. + */ +#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ +#define AT91_ID_SYS 1 /* System Peripherals */ +#define AT91SAM9261_ID_PIOA 2 /* Parallel IO Controller A */ +#define AT91SAM9261_ID_PIOB 3 /* Parallel IO Controller B */ +#define AT91SAM9261_ID_PIOC 4 /* Parallel IO Controller C */ +#define AT91SAM9261_ID_US0 6 /* USART 0 */ +#define AT91SAM9261_ID_US1 7 /* USART 1 */ +#define AT91SAM9261_ID_US2 8 /* USART 2 */ +#define AT91SAM9261_ID_MCI 9 /* Multimedia Card Interface */ +#define AT91SAM9261_ID_UDP 10 /* USB Device Port */ +#define AT91SAM9261_ID_TWI 11 /* Two-Wire Interface */ +#define AT91SAM9261_ID_SPI0 12 /* Serial Peripheral Interface 0 */ +#define AT91SAM9261_ID_SPI1 13 /* Serial Peripheral Interface 1 */ +#define AT91SAM9261_ID_SSC0 14 /* Serial Synchronous Controller 0 */ +#define AT91SAM9261_ID_SSC1 15 /* Serial Synchronous Controller 1 */ +#define AT91SAM9261_ID_SSC2 16 /* Serial Synchronous Controller 2 */ +#define AT91SAM9261_ID_TC0 17 /* Timer Counter 0 */ +#define AT91SAM9261_ID_TC1 18 /* Timer Counter 1 */ +#define AT91SAM9261_ID_TC2 19 /* Timer Counter 2 */ +#define AT91SAM9261_ID_UHP 20 /* USB Host port */ +#define AT91SAM9261_ID_LCDC 21 /* LDC Controller */ +#define AT91SAM9261_ID_IRQ0 29 /* Advanced Interrupt Controller (IRQ0) */ +#define AT91SAM9261_ID_IRQ1 30 /* Advanced Interrupt Controller (IRQ1) */ +#define AT91SAM9261_ID_IRQ2 31 /* Advanced Interrupt Controller (IRQ2) */ + + +/* + * User Peripheral physical base addresses. + */ +#define AT91SAM9261_BASE_TCB0 0xfffa0000 +#define AT91SAM9261_BASE_TC0 0xfffa0000 +#define AT91SAM9261_BASE_TC1 0xfffa0040 +#define AT91SAM9261_BASE_TC2 0xfffa0080 +#define AT91SAM9261_BASE_UDP 0xfffa4000 +#define AT91SAM9261_BASE_MCI 0xfffa8000 +#define AT91SAM9261_BASE_TWI 0xfffac000 +#define AT91SAM9261_BASE_US0 0xfffb0000 +#define AT91SAM9261_BASE_US1 0xfffb4000 +#define AT91SAM9261_BASE_US2 0xfffb8000 +#define AT91SAM9261_BASE_SSC0 0xfffbc000 +#define AT91SAM9261_BASE_SSC1 0xfffc0000 +#define AT91SAM9261_BASE_SSC2 0xfffc4000 +#define AT91SAM9261_BASE_SPI0 0xfffc8000 +#define AT91SAM9261_BASE_SPI1 0xfffcc000 +#define AT91_BASE_SYS 0xffffea00 + + +/* + * System Peripherals (offset from AT91_BASE_SYS) + */ +#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS) +#define AT91_SMC (0xffffec00 - AT91_BASE_SYS) +#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) +#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) +#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS) +#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS) +#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS) +#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS) +#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) +#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) +#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS) +#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS) +#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) +#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) +#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS) + +#define AT91_USART0 AT91SAM9261_BASE_US0 +#define AT91_USART1 AT91SAM9261_BASE_US1 +#define AT91_USART2 AT91SAM9261_BASE_US2 + + +/* + * Internal Memory. + */ +#define AT91SAM9261_SRAM_BASE 0x00300000 /* Internal SRAM base address */ +#define AT91SAM9261_SRAM_SIZE 0x00028000 /* Internal SRAM size (160Kb) */ + +#define AT91SAM9261_ROM_BASE 0x00400000 /* Internal ROM base address */ +#define AT91SAM9261_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */ + +#define AT91SAM9261_UHP_BASE 0x00500000 /* USB Host controller */ +#define AT91SAM9261_LCDC_BASE 0x00600000 /* LDC controller */ + + +#endif diff --git a/include/asm-arm/arch-at91sam9/at91sam9261_matrix.h b/include/asm-arm/arch-at91sam9/at91sam9261_matrix.h new file mode 100644 index 0000000000..e2bfc4b0c9 --- /dev/null +++ b/include/asm-arm/arch-at91sam9/at91sam9261_matrix.h @@ -0,0 +1,64 @@ +/* + * [origin: Linux kernel include/asm-arm/arch-at91/at91sam9261_matrix.h] + * + * Copyright (C) 2007 Atmel Corporation. + * + * Memory Controllers (MATRIX, EBI) - System peripherals registers. + * Based on AT91SAM9261 datasheet revision D. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91SAM9261_MATRIX_H +#define AT91SAM9261_MATRIX_H + +#define AT91_MATRIX_MCFG (AT91_MATRIX + 0x00) /* Master Configuration Register */ +#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ +#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ + +#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x04) /* Slave Configuration Register 0 */ +#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x08) /* Slave Configuration Register 1 */ +#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x0C) /* Slave Configuration Register 2 */ +#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x10) /* Slave Configuration Register 3 */ +#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x14) /* Slave Configuration Register 4 */ +#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ +#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ +#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) +#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */ + +#define AT91_MATRIX_TCR (AT91_MATRIX + 0x24) /* TCM Configuration Register */ +#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ +#define AT91_MATRIX_ITCM_0 (0 << 0) +#define AT91_MATRIX_ITCM_16 (5 << 0) +#define AT91_MATRIX_ITCM_32 (6 << 0) +#define AT91_MATRIX_ITCM_64 (7 << 0) +#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */ +#define AT91_MATRIX_DTCM_0 (0 << 4) +#define AT91_MATRIX_DTCM_16 (5 << 4) +#define AT91_MATRIX_DTCM_32 (6 << 4) +#define AT91_MATRIX_DTCM_64 (7 << 4) + +#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x30) /* EBI Chip Select Assignment Register */ +#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ +#define AT91_MATRIX_CS1A_SMC (0 << 1) +#define AT91_MATRIX_CS1A_SDRAMC (1 << 1) +#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */ +#define AT91_MATRIX_CS3A_SMC (0 << 3) +#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3) +#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */ +#define AT91_MATRIX_CS4A_SMC (0 << 4) +#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4) +#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */ +#define AT91_MATRIX_CS5A_SMC (0 << 5) +#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5) +#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ + +#define AT91_MATRIX_USBPUCR (AT91_MATRIX + 0x34) /* USB Pad Pull-Up Control Register */ +#define AT91_MATRIX_USBPUCR_PUON (1 << 30) /* USB Device PAD Pull-up Enable */ + +#endif diff --git a/include/asm-arm/arch-at91sam9/at91sam9263.h b/include/asm-arm/arch-at91sam9/at91sam9263.h new file mode 100644 index 0000000000..98251cbeee --- /dev/null +++ b/include/asm-arm/arch-at91sam9/at91sam9263.h @@ -0,0 +1,127 @@ +/* + * [origin: Linux kernel include/asm-arm/arch-at91/at91sam9263.h] + * + * (C) 2007 Atmel Corporation. + * + * Common definitions. + * Based on AT91SAM9263 datasheet revision B (Preliminary). + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91SAM9263_H +#define AT91SAM9263_H + +/* + * Peripheral identifiers/interrupts. + */ +#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ +#define AT91_ID_SYS 1 /* System Peripherals */ +#define AT91SAM9263_ID_PIOA 2 /* Parallel IO Controller A */ +#define AT91SAM9263_ID_PIOB 3 /* Parallel IO Controller B */ +#define AT91SAM9263_ID_PIOCDE 4 /* Parallel IO Controller C, D and E */ +#define AT91SAM9263_ID_US0 7 /* USART 0 */ +#define AT91SAM9263_ID_US1 8 /* USART 1 */ +#define AT91SAM9263_ID_US2 9 /* USART 2 */ +#define AT91SAM9263_ID_MCI0 10 /* Multimedia Card Interface 0 */ +#define AT91SAM9263_ID_MCI1 11 /* Multimedia Card Interface 1 */ +#define AT91SAM9263_ID_CAN 12 /* CAN */ +#define AT91SAM9263_ID_TWI 13 /* Two-Wire Interface */ +#define AT91SAM9263_ID_SPI0 14 /* Serial Peripheral Interface 0 */ +#define AT91SAM9263_ID_SPI1 15 /* Serial Peripheral Interface 1 */ +#define AT91SAM9263_ID_SSC0 16 /* Serial Synchronous Controller 0 */ +#define AT91SAM9263_ID_SSC1 17 /* Serial Synchronous Controller 1 */ +#define AT91SAM9263_ID_AC97C 18 /* AC97 Controller */ +#define AT91SAM9263_ID_TCB 19 /* Timer Counter 0, 1 and 2 */ +#define AT91SAM9263_ID_PWMC 20 /* Pulse Width Modulation Controller */ +#define AT91SAM9263_ID_EMAC 21 /* Ethernet */ +#define AT91SAM9263_ID_2DGE 23 /* 2D Graphic Engine */ +#define AT91SAM9263_ID_UDP 24 /* USB Device Port */ +#define AT91SAM9263_ID_ISI 25 /* Image Sensor Interface */ +#define AT91SAM9263_ID_LCDC 26 /* LCD Controller */ +#define AT91SAM9263_ID_DMA 27 /* DMA Controller */ +#define AT91SAM9263_ID_UHP 29 /* USB Host port */ +#define AT91SAM9263_ID_IRQ0 30 /* Advanced Interrupt Controller (IRQ0) */ +#define AT91SAM9263_ID_IRQ1 31 /* Advanced Interrupt Controller (IRQ1) */ + + +/* + * User Peripheral physical base addresses. + */ +#define AT91SAM9263_BASE_UDP 0xfff78000 +#define AT91SAM9263_BASE_TCB0 0xfff7c000 +#define AT91SAM9263_BASE_TC0 0xfff7c000 +#define AT91SAM9263_BASE_TC1 0xfff7c040 +#define AT91SAM9263_BASE_TC2 0xfff7c080 +#define AT91SAM9263_BASE_MCI0 0xfff80000 +#define AT91SAM9263_BASE_MCI1 0xfff84000 +#define AT91SAM9263_BASE_TWI 0xfff88000 +#define AT91SAM9263_BASE_US0 0xfff8c000 +#define AT91SAM9263_BASE_US1 0xfff90000 +#define AT91SAM9263_BASE_US2 0xfff94000 +#define AT91SAM9263_BASE_SSC0 0xfff98000 +#define AT91SAM9263_BASE_SSC1 0xfff9c000 +#define AT91SAM9263_BASE_AC97C 0xfffa0000 +#define AT91SAM9263_BASE_SPI0 0xfffa4000 +#define AT91SAM9263_BASE_SPI1 0xfffa8000 +#define AT91SAM9263_BASE_CAN 0xfffac000 +#define AT91SAM9263_BASE_PWMC 0xfffb8000 +#define AT91SAM9263_BASE_EMAC 0xfffbc000 +#define AT91SAM9263_BASE_ISI 0xfffc4000 +#define AT91SAM9263_BASE_2DGE 0xfffc8000 +#define AT91_BASE_SYS 0xffffe000 + +/* + * System Peripherals (offset from AT91_BASE_SYS) + */ +#define AT91_ECC0 (0xffffe000 - AT91_BASE_SYS) +#define AT91_SDRAMC0 (0xffffe200 - AT91_BASE_SYS) +#define AT91_SMC0 (0xffffe400 - AT91_BASE_SYS) +#define AT91_ECC1 (0xffffe600 - AT91_BASE_SYS) +#define AT91_SDRAMC1 (0xffffe800 - AT91_BASE_SYS) +#define AT91_SMC1 (0xffffea00 - AT91_BASE_SYS) +#define AT91_MATRIX (0xffffec00 - AT91_BASE_SYS) +#define AT91_CCFG (0xffffed10 - AT91_BASE_SYS) +#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS) +#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) +#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS) +#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS) +#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS) +#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS) +#define AT91_PIOE (0xfffffa00 - AT91_BASE_SYS) +#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) +#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) +#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS) +#define AT91_RTT0 (0xfffffd20 - AT91_BASE_SYS) +#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) +#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) +#define AT91_RTT1 (0xfffffd50 - AT91_BASE_SYS) +#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS) + +#define AT91_USART0 AT91SAM9263_BASE_US0 +#define AT91_USART1 AT91SAM9263_BASE_US1 +#define AT91_USART2 AT91SAM9263_BASE_US2 + +#define AT91_SMC AT91_SMC0 + +/* + * Internal Memory. + */ +#define AT91SAM9263_SRAM0_BASE 0x00300000 /* Internal SRAM 0 base address */ +#define AT91SAM9263_SRAM0_SIZE (80 * SZ_1K) /* Internal SRAM 0 size (80Kb) */ + +#define AT91SAM9263_ROM_BASE 0x00400000 /* Internal ROM base address */ +#define AT91SAM9263_ROM_SIZE SZ_128K /* Internal ROM size (128Kb) */ + +#define AT91SAM9263_SRAM1_BASE 0x00500000 /* Internal SRAM 1 base address */ +#define AT91SAM9263_SRAM1_SIZE SZ_16K /* Internal SRAM 1 size (16Kb) */ + +#define AT91SAM9263_LCDC_BASE 0x00700000 /* LCD Controller */ +#define AT91SAM9263_DMAC_BASE 0x00800000 /* DMA Controller */ +#define AT91SAM9263_UHP_BASE 0x00a00000 /* USB Host controller */ + + +#endif diff --git a/include/asm-arm/arch-at91sam9/at91sam9263_matrix.h b/include/asm-arm/arch-at91sam9/at91sam9263_matrix.h new file mode 100644 index 0000000000..83aaaab773 --- /dev/null +++ b/include/asm-arm/arch-at91sam9/at91sam9263_matrix.h @@ -0,0 +1,129 @@ +/* + * [origin: Linux kernel include/asm-arm/arch-at91/at91sam9263_matrix.h] + * + * Copyright (C) 2006 Atmel Corporation. + * + * Memory Controllers (MATRIX, EBI) - System peripherals registers. + * Based on AT91SAM9263 datasheet revision B (Preliminary). + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91SAM9263_MATRIX_H +#define AT91SAM9263_MATRIX_H + +#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ +#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ +#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ +#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ +#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ +#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ +#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */ +#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */ +#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */ +#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ +#define AT91_MATRIX_ULBT_INFINITE (0 << 0) +#define AT91_MATRIX_ULBT_SINGLE (1 << 0) +#define AT91_MATRIX_ULBT_FOUR (2 << 0) +#define AT91_MATRIX_ULBT_EIGHT (3 << 0) +#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) + +#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ +#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ +#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ +#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ +#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ +#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */ +#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */ +#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */ +#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ +#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ +#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) +#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */ +#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ +#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) +#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) + +#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ +#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */ +#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ +#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */ +#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ +#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */ +#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ +#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */ +#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ +#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */ +#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */ +#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */ +#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */ +#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */ +#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */ +#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */ +#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ +#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ +#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ +#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ +#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ +#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ +#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */ +#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */ +#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */ + +#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ +#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ +#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ +#define AT91_MATRIX_RCB2 (1 << 2) +#define AT91_MATRIX_RCB3 (1 << 3) +#define AT91_MATRIX_RCB4 (1 << 4) +#define AT91_MATRIX_RCB5 (1 << 5) +#define AT91_MATRIX_RCB6 (1 << 6) +#define AT91_MATRIX_RCB7 (1 << 7) +#define AT91_MATRIX_RCB8 (1 << 8) + +#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x114) /* TCM Configuration Register */ +#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ +#define AT91_MATRIX_ITCM_0 (0 << 0) +#define AT91_MATRIX_ITCM_16 (5 << 0) +#define AT91_MATRIX_ITCM_32 (6 << 0) +#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */ +#define AT91_MATRIX_DTCM_0 (0 << 4) +#define AT91_MATRIX_DTCM_16 (5 << 4) +#define AT91_MATRIX_DTCM_32 (6 << 4) + +#define AT91_MATRIX_EBI0CSA (AT91_MATRIX + 0x120) /* EBI0 Chip Select Assignment Register */ +#define AT91_MATRIX_EBI0_CS1A (1 << 1) /* Chip Select 1 Assignment */ +#define AT91_MATRIX_EBI0_CS1A_SMC (0 << 1) +#define AT91_MATRIX_EBI0_CS1A_SDRAMC (1 << 1) +#define AT91_MATRIX_EBI0_CS3A (1 << 3) /* Chip Select 3 Assignment */ +#define AT91_MATRIX_EBI0_CS3A_SMC (0 << 3) +#define AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA (1 << 3) +#define AT91_MATRIX_EBI0_CS4A (1 << 4) /* Chip Select 4 Assignment */ +#define AT91_MATRIX_EBI0_CS4A_SMC (0 << 4) +#define AT91_MATRIX_EBI0_CS4A_SMC_CF1 (1 << 4) +#define AT91_MATRIX_EBI0_CS5A (1 << 5) /* Chip Select 5 Assignment */ +#define AT91_MATRIX_EBI0_CS5A_SMC (0 << 5) +#define AT91_MATRIX_EBI0_CS5A_SMC_CF2 (1 << 5) +#define AT91_MATRIX_EBI0_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ +#define AT91_MATRIX_EBI0_VDDIOMSEL (1 << 16) /* Memory voltage selection */ +#define AT91_MATRIX_EBI0_VDDIOMSEL_1_8V (0 << 16) +#define AT91_MATRIX_EBI0_VDDIOMSEL_3_3V (1 << 16) + +#define AT91_MATRIX_EBI1CSA (AT91_MATRIX + 0x124) /* EBI1 Chip Select Assignment Register */ +#define AT91_MATRIX_EBI1_CS1A (1 << 1) /* Chip Select 1 Assignment */ +#define AT91_MATRIX_EBI1_CS1A_SMC (0 << 1) +#define AT91_MATRIX_EBI1_CS1A_SDRAMC (1 << 1) +#define AT91_MATRIX_EBI1_CS2A (1 << 3) /* Chip Select 3 Assignment */ +#define AT91_MATRIX_EBI1_CS2A_SMC (0 << 3) +#define AT91_MATRIX_EBI1_CS2A_SMC_SMARTMEDIA (1 << 3) +#define AT91_MATRIX_EBI1_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ +#define AT91_MATRIX_EBI1_VDDIOMSEL (1 << 16) /* Memory voltage selection */ +#define AT91_MATRIX_EBI1_VDDIOMSEL_1_8V (0 << 16) +#define AT91_MATRIX_EBI1_VDDIOMSEL_3_3V (1 << 16) + +#endif diff --git a/include/asm-arm/arch-at91sam9/at91sam9rl.h b/include/asm-arm/arch-at91sam9/at91sam9rl.h new file mode 100644 index 0000000000..215bbc8d6a --- /dev/null +++ b/include/asm-arm/arch-at91sam9/at91sam9rl.h @@ -0,0 +1,115 @@ +/* + * [origin: Linux kernel include/asm-arm/arch-at91/at91sam9rl.h] + * + * Copyright (C) 2007 Atmel Corporation + * + * Common definitions. + * Based on AT91SAM9RL datasheet revision A. (Preliminary) + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + */ + +#ifndef AT91SAM9RL_H +#define AT91SAM9RL_H + +/* + * Peripheral identifiers/interrupts. + */ +#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ +#define AT91_ID_SYS 1 /* System Controller */ +#define AT91SAM9RL_ID_PIOA 2 /* Parallel IO Controller A */ +#define AT91SAM9RL_ID_PIOB 3 /* Parallel IO Controller B */ +#define AT91SAM9RL_ID_PIOC 4 /* Parallel IO Controller C */ +#define AT91SAM9RL_ID_PIOD 5 /* Parallel IO Controller D */ +#define AT91SAM9RL_ID_US0 6 /* USART 0 */ +#define AT91SAM9RL_ID_US1 7 /* USART 1 */ +#define AT91SAM9RL_ID_US2 8 /* USART 2 */ +#define AT91SAM9RL_ID_US3 9 /* USART 3 */ +#define AT91SAM9RL_ID_MCI 10 /* Multimedia Card Interface */ +#define AT91SAM9RL_ID_TWI0 11 /* TWI 0 */ +#define AT91SAM9RL_ID_TWI1 12 /* TWI 1 */ +#define AT91SAM9RL_ID_SPI 13 /* Serial Peripheral Interface */ +#define AT91SAM9RL_ID_SSC0 14 /* Serial Synchronous Controller 0 */ +#define AT91SAM9RL_ID_SSC1 15 /* Serial Synchronous Controller 1 */ +#define AT91SAM9RL_ID_TC0 16 /* Timer Counter 0 */ +#define AT91SAM9RL_ID_TC1 17 /* Timer Counter 1 */ +#define AT91SAM9RL_ID_TC2 18 /* Timer Counter 2 */ +#define AT91SAM9RL_ID_PWMC 19 /* Pulse Width Modulation Controller */ +#define AT91SAM9RL_ID_TSC 20 /* Touch Screen Controller */ +#define AT91SAM9RL_ID_DMA 21 /* DMA Controller */ +#define AT91SAM9RL_ID_UDPHS 22 /* USB Device HS */ +#define AT91SAM9RL_ID_LCDC 23 /* LCD Controller */ +#define AT91SAM9RL_ID_AC97C 24 /* AC97 Controller */ +#define AT91SAM9RL_ID_IRQ0 31 /* Advanced Interrupt Controller (IRQ0) */ + + +/* + * User Peripheral physical base addresses. + */ +#define AT91SAM9RL_BASE_TCB0 0xfffa0000 +#define AT91SAM9RL_BASE_TC0 0xfffa0000 +#define AT91SAM9RL_BASE_TC1 0xfffa0040 +#define AT91SAM9RL_BASE_TC2 0xfffa0080 +#define AT91SAM9RL_BASE_MCI 0xfffa4000 +#define AT91SAM9RL_BASE_TWI0 0xfffa8000 +#define AT91SAM9RL_BASE_TWI1 0xfffac000 +#define AT91SAM9RL_BASE_US0 0xfffb0000 +#define AT91SAM9RL_BASE_US1 0xfffb4000 +#define AT91SAM9RL_BASE_US2 0xfffb8000 +#define AT91SAM9RL_BASE_US3 0xfffbc000 +#define AT91SAM9RL_BASE_SSC0 0xfffc0000 +#define AT91SAM9RL_BASE_SSC1 0xfffc4000 +#define AT91SAM9RL_BASE_PWMC 0xfffc8000 +#define AT91SAM9RL_BASE_SPI 0xfffcc000 +#define AT91SAM9RL_BASE_TSC 0xfffd0000 +#define AT91SAM9RL_BASE_UDPHS 0xfffd4000 +#define AT91SAM9RL_BASE_AC97C 0xfffd8000 +#define AT91_BASE_SYS 0xffffc000 + + +/* + * System Peripherals (offset from AT91_BASE_SYS) + */ +#define AT91_DMA (0xffffe600 - AT91_BASE_SYS) +#define AT91_ECC (0xffffe800 - AT91_BASE_SYS) +#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS) +#define AT91_SMC (0xffffec00 - AT91_BASE_SYS) +#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) +#define AT91_CCFG (0xffffef10 - AT91_BASE_SYS) +#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) +#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS) +#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS) +#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS) +#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS) +#define AT91_PIOD (0xfffffa00 - AT91_BASE_SYS) +#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) +#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) +#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS) +#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS) +#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) +#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) +#define AT91_SCKCR (0xfffffd50 - AT91_BASE_SYS) +#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS) +#define AT91_RTC (0xfffffe00 - AT91_BASE_SYS) + +#define AT91_USART0 AT91SAM9RL_BASE_US0 +#define AT91_USART1 AT91SAM9RL_BASE_US1 +#define AT91_USART2 AT91SAM9RL_BASE_US2 +#define AT91_USART3 AT91SAM9RL_BASE_US3 + + +/* + * Internal Memory. + */ +#define AT91SAM9RL_SRAM_BASE 0x00300000 /* Internal SRAM base address */ +#define AT91SAM9RL_SRAM_SIZE SZ_16K /* Internal SRAM size (16Kb) */ + +#define AT91SAM9RL_ROM_BASE 0x00400000 /* Internal ROM base address */ +#define AT91SAM9RL_ROM_SIZE (2 * SZ_16K) /* Internal ROM size (32Kb) */ + +#define AT91SAM9RL_LCDC_BASE 0x00500000 /* LCD Controller */ +#define AT91SAM9RL_UDPHS_BASE 0x00600000 /* USB Device HS controller */ + +#endif diff --git a/include/asm-arm/arch-at91sam9/at91sam9rl_matrix.h b/include/asm-arm/arch-at91sam9/at91sam9rl_matrix.h new file mode 100644 index 0000000000..af8d914acc --- /dev/null +++ b/include/asm-arm/arch-at91sam9/at91sam9rl_matrix.h @@ -0,0 +1,96 @@ +/* + * [origin: Linux kernel include/asm-arm/arch-at91/at91sam9rl_matrix.h] + * + * Copyright (C) 2007 Atmel Corporation + * + * Memory Controllers (MATRIX, EBI) - System peripherals registers. + * Based on AT91SAM9RL datasheet revision A. (Preliminary) + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + */ + +#ifndef AT91SAM9RL_MATRIX_H +#define AT91SAM9RL_MATRIX_H + +#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ +#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ +#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ +#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ +#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ +#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ +#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ +#define AT91_MATRIX_ULBT_INFINITE (0 << 0) +#define AT91_MATRIX_ULBT_SINGLE (1 << 0) +#define AT91_MATRIX_ULBT_FOUR (2 << 0) +#define AT91_MATRIX_ULBT_EIGHT (3 << 0) +#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) + +#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ +#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ +#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ +#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ +#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ +#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */ +#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ +#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ +#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) +#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */ +#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ +#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) +#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) + +#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ +#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ +#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ +#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ +#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ +#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */ +#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ +#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ +#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ +#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ +#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ +#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ + +#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ +#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ +#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ +#define AT91_MATRIX_RCB2 (1 << 2) +#define AT91_MATRIX_RCB3 (1 << 3) +#define AT91_MATRIX_RCB4 (1 << 4) +#define AT91_MATRIX_RCB5 (1 << 5) + +#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x114) /* TCM Configuration Register */ +#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ +#define AT91_MATRIX_ITCM_0 (0 << 0) +#define AT91_MATRIX_ITCM_16 (5 << 0) +#define AT91_MATRIX_ITCM_32 (6 << 0) +#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */ +#define AT91_MATRIX_DTCM_0 (0 << 4) +#define AT91_MATRIX_DTCM_16 (5 << 4) +#define AT91_MATRIX_DTCM_32 (6 << 4) + +#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI0 Chip Select Assignment Register */ +#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ +#define AT91_MATRIX_CS1A_SMC (0 << 1) +#define AT91_MATRIX_CS1A_SDRAMC (1 << 1) +#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */ +#define AT91_MATRIX_CS3A_SMC (0 << 3) +#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3) +#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */ +#define AT91_MATRIX_CS4A_SMC (0 << 4) +#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4) +#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */ +#define AT91_MATRIX_CS5A_SMC (0 << 5) +#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5) +#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ +#define AT91_MATRIX_VDDIOMSEL (1 << 16) /* Memory voltage selection */ +#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16) +#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16) + + +#endif diff --git a/include/asm-arm/arch-at91sam9/clk.h b/include/asm-arm/arch-at91sam9/clk.h index f67b4356d9..1b502c822c 100644 --- a/include/asm-arm/arch-at91sam9/clk.h +++ b/include/asm-arm/arch-at91sam9/clk.h @@ -36,4 +36,10 @@ static inline unsigned long get_usart_clk_rate(unsigned int dev_id) return AT91_MASTER_CLOCK; } +static inline unsigned long get_lcdc_clk_rate(unsigned int dev_id) +{ + return AT91_MASTER_CLOCK; +} + + #endif /* __ASM_ARM_ARCH_CLK_H__ */ diff --git a/include/asm-arm/arch-at91sam9/hardware.h b/include/asm-arm/arch-at91sam9/hardware.h index d2fe45388b..f31241901a 100644 --- a/include/asm-arm/arch-at91sam9/hardware.h +++ b/include/asm-arm/arch-at91sam9/hardware.h @@ -26,10 +26,19 @@ #define AT91_PMC_UHP AT91SAM926x_PMC_UHP #elif defined(CONFIG_AT91SAM9261) #include <asm/arch/at91sam9261.h> +#define AT91_BASE_SPI AT91SAM9261_BASE_SPI0 +#define AT91_ID_UHP AT91SAM9261_ID_UHP +#define AT91_PMC_UHP AT91SAM926x_PMC_UHP #elif defined(CONFIG_AT91SAM9263) #include <asm/arch/at91sam9263.h> +#define AT91_BASE_EMAC AT91SAM9263_BASE_EMAC +#define AT91_BASE_SPI AT91SAM9263_BASE_SPI0 +#define AT91_ID_UHP AT91SAM9263_ID_UHP +#define AT91_PMC_UHP AT91SAM926x_PMC_UHP #elif defined(CONFIG_AT91SAM9RL) #include <asm/arch/at91sam9rl.h> +#define AT91_BASE_SPI AT91SAM9RL_BASE_SPI +#define AT91_ID_UHP AT91SAM9RL_ID_UHP #elif defined(CONFIG_AT91CAP9) #include <asm/arch/at91cap9.h> #define AT91_BASE_EMAC AT91CAP9_BASE_EMAC @@ -42,15 +51,4 @@ #error "Unsupported AT91 processor" #endif -/* - * container_of - cast a member of a structure out to the containing structure - * - * @ptr: the pointer to the member. - * @type: the type of the container struct this is embedded in. - * @member: the name of the member within the struct. - */ -#define container_of(ptr, type, member) ({ \ - const typeof(((type *)0)->member) *__mptr = (ptr); \ - (type *)((char *)__mptr - offsetof(type, member)); }) - #endif diff --git a/include/asm-avr32/arch-at32ap700x/chip-features.h b/include/asm-avr32/arch-at32ap700x/chip-features.h index 29b1fd663d..c47107e2a6 100644 --- a/include/asm-avr32/arch-at32ap700x/chip-features.h +++ b/include/asm-avr32/arch-at32ap700x/chip-features.h @@ -25,6 +25,7 @@ /* Currently, all the AP700x chips have these */ #define AT32AP700x_CHIP_HAS_USART #define AT32AP700x_CHIP_HAS_MMCI +#define AT32AP700x_CHIP_HAS_SPI /* Only AP7000 has ethernet interface */ #ifdef CONFIG_AT32AP7000 diff --git a/include/asm-avr32/arch-at32ap700x/clk.h b/include/asm-avr32/arch-at32ap700x/clk.h index 385319aac7..a9d8431a66 100644 --- a/include/asm-avr32/arch-at32ap700x/clk.h +++ b/include/asm-avr32/arch-at32ap700x/clk.h @@ -58,7 +58,7 @@ static inline unsigned long get_usart_clk_rate(unsigned int dev_id) return get_pba_clk_rate(); } #endif -#ifdef AT32AP700x_CHIP_HAS_USART +#ifdef AT32AP700x_CHIP_HAS_MACB static inline unsigned long get_macb_pclk_rate(unsigned int dev_id) { return get_pbb_clk_rate(); @@ -74,6 +74,14 @@ static inline unsigned long get_mci_clk_rate(void) return get_pbb_clk_rate(); } #endif +#ifdef AT32AP700x_CHIP_HAS_SPI +static inline unsigned long get_spi_clk_rate(unsigned int dev_id) +{ + return get_pba_clk_rate(); +} +#endif + +extern void clk_init(void); /* Board code may need the SDRAM base clock as a compile-time constant */ #define SDRAMC_BUS_HZ (MAIN_CLK_RATE >> CFG_CLKDIV_HSB) diff --git a/include/asm-avr32/arch-at32ap700x/gpio.h b/include/asm-avr32/arch-at32ap700x/gpio.h index b10a3e4f86..ef20ceaab7 100644 --- a/include/asm-avr32/arch-at32ap700x/gpio.h +++ b/include/asm-avr32/arch-at32ap700x/gpio.h @@ -216,5 +216,9 @@ void gpio_enable_macb1(void); #ifdef AT32AP700x_CHIP_HAS_MMCI void gpio_enable_mmci(void); #endif +#ifdef AT32AP700x_CHIP_HAS_SPI +void gpio_enable_spi0(unsigned long cs_mask); +void gpio_enable_spi1(unsigned long cs_mask); +#endif #endif /* __ASM_AVR32_ARCH_GPIO_H__ */ diff --git a/include/asm-avr32/arch-at32ap700x/hmatrix.h b/include/asm-avr32/arch-at32ap700x/hmatrix.h new file mode 100644 index 0000000000..d6b626328d --- /dev/null +++ b/include/asm-avr32/arch-at32ap700x/hmatrix.h @@ -0,0 +1,61 @@ +/* + * Copyright (C) 2008 Atmel Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __ASM_AVR32_ARCH_HMATRIX_H__ +#define __ASM_AVR32_ARCH_HMATRIX_H__ + +#include <asm/hmatrix-common.h> + +/* Bitfields in SFR4 (EBI) */ +#define HMATRIX_EBI_SDRAM_ENABLE_OFFSET 1 +#define HMATRIX_EBI_SDRAM_ENABLE_SIZE 1 +#define HMATRIX_EBI_NAND_ENABLE_OFFSET 3 +#define HMATRIX_EBI_NAND_ENABLE_SIZE 1 +#define HMATRIX_EBI_CF0_ENABLE_OFFSET 4 +#define HMATRIX_EBI_CF0_ENABLE_SIZE 1 +#define HMATRIX_EBI_CF1_ENABLE_OFFSET 5 +#define HMATRIX_EBI_CF1_ENABLE_SIZE 1 +#define HMATRIX_EBI_PULLUP_DISABLE_OFFSET 8 +#define HMATRIX_EBI_PULLUP_DISABLE_SIZE 1 + +/* HSB masters */ +#define HMATRIX_MASTER_CPU_DCACHE 0 +#define HMATRIX_MASTER_CPU_ICACHE 1 +#define HMATRIX_MASTER_PDC 2 +#define HMATRIX_MASTER_ISI 3 +#define HMATRIX_MASTER_USBA 4 +#define HMATRIX_MASTER_LCDC 5 +#define HMATRIX_MASTER_MACB0 6 +#define HMATRIX_MASTER_MACB1 7 +#define HMATRIX_MASTER_DMACA_M0 8 +#define HMATRIX_MASTER_DMACA_M1 9 + +/* HSB slaves */ +#define HMATRIX_SLAVE_SRAM0 0 +#define HMATRIX_SLAVE_SRAM1 1 +#define HMATRIX_SLAVE_PBA 2 +#define HMATRIX_SLAVE_PBB 3 +#define HMATRIX_SLAVE_EBI 4 +#define HMATRIX_SLAVE_USBA 5 +#define HMATRIX_SLAVE_LCDC 6 +#define HMATRIX_SLAVE_DMACA 7 + +#endif /* __ASM_AVR32_ARCH_HMATRIX_H__ */ diff --git a/include/asm-avr32/arch-at32ap700x/hmatrix2.h b/include/asm-avr32/arch-at32ap700x/hmatrix2.h deleted file mode 100644 index b0e787a92f..0000000000 --- a/include/asm-avr32/arch-at32ap700x/hmatrix2.h +++ /dev/null @@ -1,232 +0,0 @@ -/* - * Register definition for the High-speed Bus Matrix - */ -#ifndef __ASM_AVR32_HMATRIX2_H__ -#define __ASM_AVR32_HMATRIX2_H__ - -/* HMATRIX2 register offsets */ -#define HMATRIX2_MCFG0 0x0000 -#define HMATRIX2_MCFG1 0x0004 -#define HMATRIX2_MCFG2 0x0008 -#define HMATRIX2_MCFG3 0x000c -#define HMATRIX2_MCFG4 0x0010 -#define HMATRIX2_MCFG5 0x0014 -#define HMATRIX2_MCFG6 0x0018 -#define HMATRIX2_MCFG7 0x001c -#define HMATRIX2_MCFG8 0x0020 -#define HMATRIX2_MCFG9 0x0024 -#define HMATRIX2_MCFG10 0x0028 -#define HMATRIX2_MCFG11 0x002c -#define HMATRIX2_MCFG12 0x0030 -#define HMATRIX2_MCFG13 0x0034 -#define HMATRIX2_MCFG14 0x0038 -#define HMATRIX2_MCFG15 0x003c -#define HMATRIX2_SCFG0 0x0040 -#define HMATRIX2_SCFG1 0x0044 -#define HMATRIX2_SCFG2 0x0048 -#define HMATRIX2_SCFG3 0x004c -#define HMATRIX2_SCFG4 0x0050 -#define HMATRIX2_SCFG5 0x0054 -#define HMATRIX2_SCFG6 0x0058 -#define HMATRIX2_SCFG7 0x005c -#define HMATRIX2_SCFG8 0x0060 -#define HMATRIX2_SCFG9 0x0064 -#define HMATRIX2_SCFG10 0x0068 -#define HMATRIX2_SCFG11 0x006c -#define HMATRIX2_SCFG12 0x0070 -#define HMATRIX2_SCFG13 0x0074 -#define HMATRIX2_SCFG14 0x0078 -#define HMATRIX2_SCFG15 0x007c -#define HMATRIX2_PRAS0 0x0080 -#define HMATRIX2_PRBS0 0x0084 -#define HMATRIX2_PRAS1 0x0088 -#define HMATRIX2_PRBS1 0x008c -#define HMATRIX2_PRAS2 0x0090 -#define HMATRIX2_PRBS2 0x0094 -#define HMATRIX2_PRAS3 0x0098 -#define HMATRIX2_PRBS3 0x009c -#define HMATRIX2_PRAS4 0x00a0 -#define HMATRIX2_PRBS4 0x00a4 -#define HMATRIX2_PRAS5 0x00a8 -#define HMATRIX2_PRBS5 0x00ac -#define HMATRIX2_PRAS6 0x00b0 -#define HMATRIX2_PRBS6 0x00b4 -#define HMATRIX2_PRAS7 0x00b8 -#define HMATRIX2_PRBS7 0x00bc -#define HMATRIX2_PRAS8 0x00c0 -#define HMATRIX2_PRBS8 0x00c4 -#define HMATRIX2_PRAS9 0x00c8 -#define HMATRIX2_PRBS9 0x00cc -#define HMATRIX2_PRAS10 0x00d0 -#define HMATRIX2_PRBS10 0x00d4 -#define HMATRIX2_PRAS11 0x00d8 -#define HMATRIX2_PRBS11 0x00dc -#define HMATRIX2_PRAS12 0x00e0 -#define HMATRIX2_PRBS12 0x00e4 -#define HMATRIX2_PRAS13 0x00e8 -#define HMATRIX2_PRBS13 0x00ec -#define HMATRIX2_PRAS14 0x00f0 -#define HMATRIX2_PRBS14 0x00f4 -#define HMATRIX2_PRAS15 0x00f8 -#define HMATRIX2_PRBS15 0x00fc -#define HMATRIX2_MRCR 0x0100 -#define HMATRIX2_SFR0 0x0110 -#define HMATRIX2_SFR1 0x0114 -#define HMATRIX2_SFR2 0x0118 -#define HMATRIX2_SFR3 0x011c -#define HMATRIX2_SFR4 0x0120 -#define HMATRIX2_SFR5 0x0124 -#define HMATRIX2_SFR6 0x0128 -#define HMATRIX2_SFR7 0x012c -#define HMATRIX2_SFR8 0x0130 -#define HMATRIX2_SFR9 0x0134 -#define HMATRIX2_SFR10 0x0138 -#define HMATRIX2_SFR11 0x013c -#define HMATRIX2_SFR12 0x0140 -#define HMATRIX2_SFR13 0x0144 -#define HMATRIX2_SFR14 0x0148 -#define HMATRIX2_SFR15 0x014c -#define HMATRIX2_VERSION 0x01fc - -/* Bitfields in MCFG0 */ -#define HMATRIX2_ULBT_OFFSET 0 -#define HMATRIX2_ULBT_SIZE 3 - -/* Bitfields in SCFG0 */ -#define HMATRIX2_SLOT_CYCLE_OFFSET 0 -#define HMATRIX2_SLOT_CYCLE_SIZE 8 -#define HMATRIX2_DEFMSTR_TYPE_OFFSET 16 -#define HMATRIX2_DEFMSTR_TYPE_SIZE 2 -#define HMATRIX2_FIXED_DEFMSTR_OFFSET 18 -#define HMATRIX2_FIXED_DEFMSTR_SIZE 4 -#define HMATRIX2_ARBT_OFFSET 24 -#define HMATRIX2_ARBT_SIZE 2 - -/* Bitfields in PRAS0 */ -#define HMATRIX2_M0PR_OFFSET 0 -#define HMATRIX2_M0PR_SIZE 4 -#define HMATRIX2_M1PR_OFFSET 4 -#define HMATRIX2_M1PR_SIZE 4 -#define HMATRIX2_M2PR_OFFSET 8 -#define HMATRIX2_M2PR_SIZE 4 -#define HMATRIX2_M3PR_OFFSET 12 -#define HMATRIX2_M3PR_SIZE 4 -#define HMATRIX2_M4PR_OFFSET 16 -#define HMATRIX2_M4PR_SIZE 4 -#define HMATRIX2_M5PR_OFFSET 20 -#define HMATRIX2_M5PR_SIZE 4 -#define HMATRIX2_M6PR_OFFSET 24 -#define HMATRIX2_M6PR_SIZE 4 -#define HMATRIX2_M7PR_OFFSET 28 -#define HMATRIX2_M7PR_SIZE 4 - -/* Bitfields in PRBS0 */ -#define HMATRIX2_M8PR_OFFSET 0 -#define HMATRIX2_M8PR_SIZE 4 -#define HMATRIX2_M9PR_OFFSET 4 -#define HMATRIX2_M9PR_SIZE 4 -#define HMATRIX2_M10PR_OFFSET 8 -#define HMATRIX2_M10PR_SIZE 4 -#define HMATRIX2_M11PR_OFFSET 12 -#define HMATRIX2_M11PR_SIZE 4 -#define HMATRIX2_M12PR_OFFSET 16 -#define HMATRIX2_M12PR_SIZE 4 -#define HMATRIX2_M13PR_OFFSET 20 -#define HMATRIX2_M13PR_SIZE 4 -#define HMATRIX2_M14PR_OFFSET 24 -#define HMATRIX2_M14PR_SIZE 4 -#define HMATRIX2_M15PR_OFFSET 28 -#define HMATRIX2_M15PR_SIZE 4 - -/* Bitfields in MRCR */ -#define HMATRIX2_RBC0_OFFSET 0 -#define HMATRIX2_RBC0_SIZE 1 -#define HMATRIX2_RBC1_OFFSET 1 -#define HMATRIX2_RBC1_SIZE 1 -#define HMATRIX2_RBC2_OFFSET 2 -#define HMATRIX2_RBC2_SIZE 1 -#define HMATRIX2_RBC3_OFFSET 3 -#define HMATRIX2_RBC3_SIZE 1 -#define HMATRIX2_RBC4_OFFSET 4 -#define HMATRIX2_RBC4_SIZE 1 -#define HMATRIX2_RBC5_OFFSET 5 -#define HMATRIX2_RBC5_SIZE 1 -#define HMATRIX2_RBC6_OFFSET 6 -#define HMATRIX2_RBC6_SIZE 1 -#define HMATRIX2_RBC7_OFFSET 7 -#define HMATRIX2_RBC7_SIZE 1 -#define HMATRIX2_RBC8_OFFSET 8 -#define HMATRIX2_RBC8_SIZE 1 -#define HMATRIX2_RBC9_OFFSET 9 -#define HMATRIX2_RBC9_SIZE 1 -#define HMATRIX2_RBC10_OFFSET 10 -#define HMATRIX2_RBC10_SIZE 1 -#define HMATRIX2_RBC11_OFFSET 11 -#define HMATRIX2_RBC11_SIZE 1 -#define HMATRIX2_RBC12_OFFSET 12 -#define HMATRIX2_RBC12_SIZE 1 -#define HMATRIX2_RBC13_OFFSET 13 -#define HMATRIX2_RBC13_SIZE 1 -#define HMATRIX2_RBC14_OFFSET 14 -#define HMATRIX2_RBC14_SIZE 1 -#define HMATRIX2_RBC15_OFFSET 15 -#define HMATRIX2_RBC15_SIZE 1 - -/* Bitfields in SFR0 */ -#define HMATRIX2_SFR_OFFSET 0 -#define HMATRIX2_SFR_SIZE 32 - -/* Bitfields in SFR4 */ -#define HMATRIX2_CS1A_OFFSET 1 -#define HMATRIX2_CS1A_SIZE 1 -#define HMATRIX2_CS3A_OFFSET 3 -#define HMATRIX2_CS3A_SIZE 1 -#define HMATRIX2_CS4A_OFFSET 4 -#define HMATRIX2_CS4A_SIZE 1 -#define HMATRIX2_CS5A_OFFSET 5 -#define HMATRIX2_CS5A_SIZE 1 -#define HMATRIX2_DBPUC_OFFSET 8 -#define HMATRIX2_DBPUC_SIZE 1 - -/* Bitfields in VERSION */ -#define HMATRIX2_VERSION_OFFSET 0 -#define HMATRIX2_VERSION_SIZE 12 -#define HMATRIX2_MFN_OFFSET 16 -#define HMATRIX2_MFN_SIZE 3 - -/* Constants for ULBT */ -#define HMATRIX2_ULBT_INFINITE 0 -#define HMATRIX2_ULBT_SINGLE 1 -#define HMATRIX2_ULBT_FOUR_BEAT 2 -#define HMATRIX2_ULBT_SIXTEEN_BEAT 4 - -/* Constants for DEFMSTR_TYPE */ -#define HMATRIX2_DEFMSTR_TYPE_NO_DEFAULT 0 -#define HMATRIX2_DEFMSTR_TYPE_LAST_DEFAULT 1 -#define HMATRIX2_DEFMSTR_TYPE_FIXED_DEFAULT 2 - -/* Constants for ARBT */ -#define HMATRIX2_ARBT_ROUND_ROBIN 0 -#define HMATRIX2_ARBT_FIXED_PRIORITY 1 - -/* Bit manipulation macros */ -#define HMATRIX2_BIT(name) \ - (1 << HMATRIX2_##name##_OFFSET) -#define HMATRIX2_BF(name,value) \ - (((value) & ((1 << HMATRIX2_##name##_SIZE) - 1)) \ - << HMATRIX2_##name##_OFFSET) -#define HMATRIX2_BFEXT(name,value) \ - (((value) >> HMATRIX2_##name##_OFFSET) \ - & ((1 << HMATRIX2_##name##_SIZE) - 1)) -#define HMATRIX2_BFINS(name,value,old) \ - (((old) & ~(((1 << HMATRIX2_##name##_SIZE) - 1) \ - << HMATRIX2_##name##_OFFSET)) \ - | HMATRIX2_BF(name,value)) - -/* Register access macros */ -#define hmatrix2_readl(reg) \ - readl((void *)HMATRIX_BASE + HMATRIX2_##reg) -#define hmatrix2_writel(reg,value) \ - writel((value), (void *)HMATRIX_BASE + HMATRIX2_##reg) - -#endif /* __ASM_AVR32_HMATRIX2_H__ */ diff --git a/include/asm-avr32/arch-at32ap700x/memory-map.h b/include/asm-avr32/arch-at32ap700x/memory-map.h index 5513e88e7b..6592c039fa 100644 --- a/include/asm-avr32/arch-at32ap700x/memory-map.h +++ b/include/asm-avr32/arch-at32ap700x/memory-map.h @@ -22,6 +22,26 @@ #ifndef __AT32AP7000_MEMORY_MAP_H__ #define __AT32AP7000_MEMORY_MAP_H__ +/* Internal and external memories */ +#define EBI_SRAM_CS0_BASE 0x00000000 +#define EBI_SRAM_CS0_SIZE 0x04000000 +#define EBI_SRAM_CS4_BASE 0x04000000 +#define EBI_SRAM_CS4_SIZE 0x04000000 +#define EBI_SRAM_CS2_BASE 0x08000000 +#define EBI_SRAM_CS2_SIZE 0x04000000 +#define EBI_SRAM_CS3_BASE 0x0c000000 +#define EBI_SRAM_CS3_SIZE 0x04000000 +#define EBI_SRAM_CS1_BASE 0x10000000 +#define EBI_SRAM_CS1_SIZE 0x10000000 +#define EBI_SRAM_CS5_BASE 0x20000000 +#define EBI_SRAM_CS5_SIZE 0x04000000 + +#define EBI_SDRAM_BASE EBI_SRAM_CS1_BASE +#define EBI_SDRAM_SIZE EBI_SRAM_CS1_SIZE + +#define INTERNAL_SRAM_BASE 0x24000000 +#define INTERNAL_SRAM_SIZE 0x00008000 + /* Devices on the High Speed Bus (HSB) */ #define LCDC_BASE 0xFF000000 #define DMAC_BASE 0xFF200000 diff --git a/include/asm-avr32/hmatrix-common.h b/include/asm-avr32/hmatrix-common.h new file mode 100644 index 0000000000..4b7e6105dd --- /dev/null +++ b/include/asm-avr32/hmatrix-common.h @@ -0,0 +1,131 @@ +/* + * Copyright (C) 2008 Atmel Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __ASM_AVR32_HMATRIX_COMMON_H__ +#define __ASM_AVR32_HMATRIX_COMMON_H__ + +/* HMATRIX register offsets */ +struct hmatrix_regs { + u32 MCFG[16]; + u32 SCFG[16]; + struct { + u32 A; + u32 B; + } PRS[16]; + u32 MRCR; + u32 __reserved[3]; + u32 SFR[16]; +}; + +/* Bitfields in MCFG */ +#define HMATRIX_ULBT_OFFSET 0 +#define HMATRIX_ULBT_SIZE 3 + +/* Bitfields in SCFG */ +#define HMATRIX_SLOT_CYCLE_OFFSET 0 +#define HMATRIX_SLOT_CYCLE_SIZE 8 +#define HMATRIX_DEFMSTR_TYPE_OFFSET 16 +#define HMATRIX_DEFMSTR_TYPE_SIZE 2 +#define HMATRIX_FIXED_DEFMSTR_OFFSET 18 +#define HMATRIX_FIXED_DEFMSTR_SIZE 4 +#define HMATRIX_ARBT_OFFSET 24 +#define HMATRIX_ARBT_SIZE 1 + +/* Bitfields in PRS.A */ +#define HMATRIX_M0PR_OFFSET 0 +#define HMATRIX_M0PR_SIZE 4 +#define HMATRIX_M1PR_OFFSET 4 +#define HMATRIX_M1PR_SIZE 4 +#define HMATRIX_M2PR_OFFSET 8 +#define HMATRIX_M2PR_SIZE 4 +#define HMATRIX_M3PR_OFFSET 12 +#define HMATRIX_M3PR_SIZE 4 +#define HMATRIX_M4PR_OFFSET 16 +#define HMATRIX_M4PR_SIZE 4 +#define HMATRIX_M5PR_OFFSET 20 +#define HMATRIX_M5PR_SIZE 4 +#define HMATRIX_M6PR_OFFSET 24 +#define HMATRIX_M6PR_SIZE 4 +#define HMATRIX_M7PR_OFFSET 28 +#define HMATRIX_M7PR_SIZE 4 + +/* Bitfields in PRS.B */ +#define HMATRIX_M8PR_OFFSET 0 +#define HMATRIX_M8PR_SIZE 4 +#define HMATRIX_M9PR_OFFSET 4 +#define HMATRIX_M9PR_SIZE 4 +#define HMATRIX_M10PR_OFFSET 8 +#define HMATRIX_M10PR_SIZE 4 +#define HMATRIX_M11PR_OFFSET 12 +#define HMATRIX_M11PR_SIZE 4 +#define HMATRIX_M12PR_OFFSET 16 +#define HMATRIX_M12PR_SIZE 4 +#define HMATRIX_M13PR_OFFSET 20 +#define HMATRIX_M13PR_SIZE 4 +#define HMATRIX_M14PR_OFFSET 24 +#define HMATRIX_M14PR_SIZE 4 +#define HMATRIX_M15PR_OFFSET 28 +#define HMATRIX_M15PR_SIZE 4 + +/* Constants for ULBT */ +#define HMATRIX_ULBT_INFINITE 0 +#define HMATRIX_ULBT_SINGLE 1 +#define HMATRIX_ULBT_FOUR_BEAT 2 +#define HMATRIX_ULBT_EIGHT_BEAT 3 +#define HMATRIX_ULBT_SIXTEEN_BEAT 4 + +/* Constants for DEFMSTR_TYPE */ +#define HMATRIX_DEFMSTR_TYPE_NO_DEFAULT 0 +#define HMATRIX_DEFMSTR_TYPE_LAST_DEFAULT 1 +#define HMATRIX_DEFMSTR_TYPE_FIXED_DEFAULT 2 + +/* Constants for ARBT */ +#define HMATRIX_ARBT_ROUND_ROBIN 0 +#define HMATRIX_ARBT_FIXED_PRIORITY 1 + +/* Bit manipulation macros */ +#define HMATRIX_BIT(name) \ + (1 << HMATRIX_##name##_OFFSET) +#define HMATRIX_BF(name,value) \ + (((value) & ((1 << HMATRIX_##name##_SIZE) - 1)) \ + << HMATRIX_##name##_OFFSET) +#define HMATRIX_BFEXT(name,value) \ + (((value) >> HMATRIX_##name##_OFFSET) \ + & ((1 << HMATRIX_##name##_SIZE) - 1)) +#define HMATRIX_BFINS(name,value,old) \ + (((old) & ~(((1 << HMATRIX_##name##_SIZE) - 1) \ + << HMATRIX_##name##_OFFSET)) \ + | HMATRIX_BF(name,value)) + +/* Register access macros */ +#define __hmatrix_reg(reg) \ + (((volatile struct hmatrix_regs *)HMATRIX_BASE)->reg) +#define hmatrix_read(reg) \ + (__hmatrix_reg(reg)) +#define hmatrix_write(reg, value) \ + do { __hmatrix_reg(reg) = (value); } while (0) + +#define hmatrix_slave_read(slave, reg) \ + hmatrix_read(reg[HMATRIX_SLAVE_##slave]) +#define hmatrix_slave_write(slave, reg, value) \ + hmatrix_write(reg[HMATRIX_SLAVE_##slave], value) + +#endif /* __ASM_AVR32_HMATRIX_COMMON_H__ */ diff --git a/include/asm-avr32/sdram.h b/include/asm-avr32/sdram.h index 833af6e6ad..7bdefc1fd2 100644 --- a/include/asm-avr32/sdram.h +++ b/include/asm-avr32/sdram.h @@ -22,15 +22,32 @@ #ifndef __ASM_AVR32_SDRAM_H #define __ASM_AVR32_SDRAM_H -struct sdram_info { - unsigned long phys_addr; - unsigned int row_bits, col_bits, bank_bits; - unsigned int cas, twr, trc, trp, trcd, tras, txsr; +struct sdram_config { + /* Number of data bits. */ + enum { + SDRAM_DATA_16BIT, + SDRAM_DATA_32BIT, + } data_bits; + + /* Number of address bits */ + uint8_t row_bits, col_bits, bank_bits; + + /* SDRAM timings in cycles */ + uint8_t cas, twr, trc, trp, trcd, tras, txsr; /* SDRAM refresh period in cycles */ unsigned long refresh_period; }; -extern unsigned long sdram_init(const struct sdram_info *info); +/* + * Attempt to initialize the SDRAM controller using the specified + * parameters. Return the expected size of the memory area based on + * the number of address and data bits. + * + * The caller should verify that the configuration is correct by + * running a memory test, e.g. get_ram_size(). + */ +extern unsigned long sdram_init(void *sdram_base, + const struct sdram_config *config); #endif /* __ASM_AVR32_SDRAM_H */ diff --git a/include/asm-avr32/sections.h b/include/asm-avr32/sections.h index 75373abde7..fe819b2db6 100644 --- a/include/asm-avr32/sections.h +++ b/include/asm-avr32/sections.h @@ -25,15 +25,8 @@ /* References to section boundaries */ extern char _text[], _etext[]; -extern char __flashprog_start[], __flashprog_end[]; extern char _data[], __data_lma[], _edata[], __edata_lma[]; extern char __got_start[], __got_lma[], __got_end[]; extern char _end[]; -/* - * Everything in .flashprog will be locked in the icache so it doesn't - * get disturbed when executing flash commands. - */ -#define __flashprog __attribute__((section(".flashprog"), __noinline__)) - #endif /* __ASM_AVR32_SECTIONS_H */ diff --git a/include/asm-avr32/u-boot.h b/include/asm-avr32/u-boot.h index 71dfcaf284..85ef008b72 100644 --- a/include/asm-avr32/u-boot.h +++ b/include/asm-avr32/u-boot.h @@ -42,15 +42,4 @@ typedef struct bd_info { #define bi_memstart bi_dram[0].start #define bi_memsize bi_dram[0].size -/** - * container_of - cast a member of a structure out to the containing structure - * - * @ptr: the pointer to the member. - * @type: the type of the container struct this is embedded in. - * @member: the name of the member within the struct. - */ -#define container_of(ptr, type, member) ({ \ - const typeof( ((type *)0)->member ) *__mptr = (ptr); \ - (type *)( (char *)__mptr - offsetof(type,member) );}) - #endif /* __ASM_U_BOOT_H__ */ diff --git a/include/asm-mips/errno.h b/include/asm-mips/errno.h new file mode 100644 index 0000000000..1665a63a81 --- /dev/null +++ b/include/asm-mips/errno.h @@ -0,0 +1,143 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 1999, 2001, 2002 by Ralf Baechle + */ +#ifndef _ASM_MIPS_ERRNO_H +#define _ASM_MIPS_ERRNO_H + +/* + * These first 34 error codes are from Linux 2.6, <asm-generic/errno-base.h> + */ +#define EPERM 1 /* Operation not permitted */ +#define ENOENT 2 /* No such file or directory */ +#define ESRCH 3 /* No such process */ +#define EINTR 4 /* Interrupted system call */ +#define EIO 5 /* I/O error */ +#define ENXIO 6 /* No such device or address */ +#define E2BIG 7 /* Argument list too long */ +#define ENOEXEC 8 /* Exec format error */ +#define EBADF 9 /* Bad file number */ +#define ECHILD 10 /* No child processes */ +#define EAGAIN 11 /* Try again */ +#define ENOMEM 12 /* Out of memory */ +#define EACCES 13 /* Permission denied */ +#define EFAULT 14 /* Bad address */ +#define ENOTBLK 15 /* Block device required */ +#define EBUSY 16 /* Device or resource busy */ +#define EEXIST 17 /* File exists */ +#define EXDEV 18 /* Cross-device link */ +#define ENODEV 19 /* No such device */ +#define ENOTDIR 20 /* Not a directory */ +#define EISDIR 21 /* Is a directory */ +#define EINVAL 22 /* Invalid argument */ +#define ENFILE 23 /* File table overflow */ +#define EMFILE 24 /* Too many open files */ +#define ENOTTY 25 /* Not a typewriter */ +#define ETXTBSY 26 /* Text file busy */ +#define EFBIG 27 /* File too large */ +#define ENOSPC 28 /* No space left on device */ +#define ESPIPE 29 /* Illegal seek */ +#define EROFS 30 /* Read-only file system */ +#define EMLINK 31 /* Too many links */ +#define EPIPE 32 /* Broken pipe */ +#define EDOM 33 /* Math argument out of domain of func */ +#define ERANGE 34 /* Math result not representable */ + +/* + * These error numbers are intended to be MIPS ABI compatible + */ +#define ENOMSG 35 /* No message of desired type */ +#define EIDRM 36 /* Identifier removed */ +#define ECHRNG 37 /* Channel number out of range */ +#define EL2NSYNC 38 /* Level 2 not synchronized */ +#define EL3HLT 39 /* Level 3 halted */ +#define EL3RST 40 /* Level 3 reset */ +#define ELNRNG 41 /* Link number out of range */ +#define EUNATCH 42 /* Protocol driver not attached */ +#define ENOCSI 43 /* No CSI structure available */ +#define EL2HLT 44 /* Level 2 halted */ +#define EDEADLK 45 /* Resource deadlock would occur */ +#define ENOLCK 46 /* No record locks available */ +#define EBADE 50 /* Invalid exchange */ +#define EBADR 51 /* Invalid request descriptor */ +#define EXFULL 52 /* Exchange full */ +#define ENOANO 53 /* No anode */ +#define EBADRQC 54 /* Invalid request code */ +#define EBADSLT 55 /* Invalid slot */ +#define EDEADLOCK 56 /* File locking deadlock error */ +#define EBFONT 59 /* Bad font file format */ +#define ENOSTR 60 /* Device not a stream */ +#define ENODATA 61 /* No data available */ +#define ETIME 62 /* Timer expired */ +#define ENOSR 63 /* Out of streams resources */ +#define ENONET 64 /* Machine is not on the network */ +#define ENOPKG 65 /* Package not installed */ +#define EREMOTE 66 /* Object is remote */ +#define ENOLINK 67 /* Link has been severed */ +#define EADV 68 /* Advertise error */ +#define ESRMNT 69 /* Srmount error */ +#define ECOMM 70 /* Communication error on send */ +#define EPROTO 71 /* Protocol error */ +#define EDOTDOT 73 /* RFS specific error */ +#define EMULTIHOP 74 /* Multihop attempted */ +#define EBADMSG 77 /* Not a data message */ +#define ENAMETOOLONG 78 /* File name too long */ +#define EOVERFLOW 79 /* Value too large for defined data type */ +#define ENOTUNIQ 80 /* Name not unique on network */ +#define EBADFD 81 /* File descriptor in bad state */ +#define EREMCHG 82 /* Remote address changed */ +#define ELIBACC 83 /* Can not access a needed shared library */ +#define ELIBBAD 84 /* Accessing a corrupted shared library */ +#define ELIBSCN 85 /* .lib section in a.out corrupted */ +#define ELIBMAX 86 /* Attempting to link in too many shared libraries */ +#define ELIBEXEC 87 /* Cannot exec a shared library directly */ +#define EILSEQ 88 /* Illegal byte sequence */ +#define ENOSYS 89 /* Function not implemented */ +#define ELOOP 90 /* Too many symbolic links encountered */ +#define ERESTART 91 /* Interrupted system call should be restarted */ +#define ESTRPIPE 92 /* Streams pipe error */ +#define ENOTEMPTY 93 /* Directory not empty */ +#define EUSERS 94 /* Too many users */ +#define ENOTSOCK 95 /* Socket operation on non-socket */ +#define EDESTADDRREQ 96 /* Destination address required */ +#define EMSGSIZE 97 /* Message too long */ +#define EPROTOTYPE 98 /* Protocol wrong type for socket */ +#define ENOPROTOOPT 99 /* Protocol not available */ +#define EPROTONOSUPPORT 120 /* Protocol not supported */ +#define ESOCKTNOSUPPORT 121 /* Socket type not supported */ +#define EOPNOTSUPP 122 /* Operation not supported on transport endpoint */ +#define EPFNOSUPPORT 123 /* Protocol family not supported */ +#define EAFNOSUPPORT 124 /* Address family not supported by protocol */ +#define EADDRINUSE 125 /* Address already in use */ +#define EADDRNOTAVAIL 126 /* Cannot assign requested address */ +#define ENETDOWN 127 /* Network is down */ +#define ENETUNREACH 128 /* Network is unreachable */ +#define ENETRESET 129 /* Network dropped connection because of reset */ +#define ECONNABORTED 130 /* Software caused connection abort */ +#define ECONNRESET 131 /* Connection reset by peer */ +#define ENOBUFS 132 /* No buffer space available */ +#define EISCONN 133 /* Transport endpoint is already connected */ +#define ENOTCONN 134 /* Transport endpoint is not connected */ +#define EUCLEAN 135 /* Structure needs cleaning */ +#define ENOTNAM 137 /* Not a XENIX named type file */ +#define ENAVAIL 138 /* No XENIX semaphores available */ +#define EISNAM 139 /* Is a named type file */ +#define EREMOTEIO 140 /* Remote I/O error */ +#define EINIT 141 /* Reserved */ +#define EREMDEV 142 /* Error 142 */ +#define ESHUTDOWN 143 /* Cannot send after transport endpoint shutdown */ +#define ETOOMANYREFS 144 /* Too many references: cannot splice */ +#define ETIMEDOUT 145 /* Connection timed out */ +#define ECONNREFUSED 146 /* Connection refused */ +#define EHOSTDOWN 147 /* Host is down */ +#define EHOSTUNREACH 148 /* No route to host */ +#define EWOULDBLOCK EAGAIN /* Operation would block */ +#define EALREADY 149 /* Operation already in progress */ +#define EINPROGRESS 150 /* Operation now in progress */ +#define ESTALE 151 /* Stale NFS file handle */ +#define ECANCELED 158 /* AIO operation canceled */ + +#endif /* _ASM_MIPS_ERRNO_H */ diff --git a/include/asm-mips/mipsregs.h b/include/asm-mips/mipsregs.h index 61a0dac1ce..be7e5c65ec 100644 --- a/include/asm-mips/mipsregs.h +++ b/include/asm-mips/mipsregs.h @@ -7,8 +7,8 @@ * Copyright (C) 2000 Silicon Graphics, Inc. * Modified for further R[236]000 support by Paul M. Antoine, 1996. * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. - * Copyright (C) 2003 Maciej W. Rozycki + * Copyright (C) 2000, 07 MIPS Technologies, Inc. + * Copyright (C) 2003, 2004 Maciej W. Rozycki */ #ifndef _ASM_MIPSREGS_H #define _ASM_MIPSREGS_H @@ -29,6 +29,15 @@ #endif /* + * Configure language + */ +#ifdef __ASSEMBLY__ +#define _ULCAST_ +#else +#define _ULCAST_ (unsigned long) +#endif + +/* * Coprocessor 0 register names */ #define CP0_INDEX $0 @@ -55,12 +64,15 @@ #define CP0_XCONTEXT $20 #define CP0_FRAMEMASK $21 #define CP0_DIAGNOSTIC $22 +#define CP0_DEBUG $23 +#define CP0_DEPC $24 #define CP0_PERFORMANCE $25 #define CP0_ECC $26 #define CP0_CACHEERR $27 #define CP0_TAGLO $28 #define CP0_TAGHI $29 #define CP0_ERROREPC $30 +#define CP0_DESAVE $31 /* * R4640/R4650 cp0 register names. These registers are listed @@ -82,11 +94,27 @@ #define CP0_S1_DERRADDR0 $26 #define CP0_S1_DERRADDR1 $27 #define CP0_S1_INTCONTROL $20 + +/* + * Coprocessor 0 Set 2 register names + */ +#define CP0_S2_SRSCTL $12 /* MIPSR2 */ + +/* + * Coprocessor 0 Set 3 register names + */ +#define CP0_S3_SRSMAP $12 /* MIPSR2 */ + +/* + * TX39 Series + */ +#define CP0_TX39_CACHE $7 + /* * Coprocessor 1 (FPU) register names */ -#define CP1_REVISION $0 -#define CP1_STATUS $31 +#define CP1_REVISION $0 +#define CP1_STATUS $31 /* * FPU Status Register Values @@ -95,230 +123,113 @@ * Status Register Values */ -#define FPU_CSR_FLUSH 0x01000000 /* flush denormalised results to 0 */ -#define FPU_CSR_COND 0x00800000 /* $fcc0 */ -#define FPU_CSR_COND0 0x00800000 /* $fcc0 */ -#define FPU_CSR_COND1 0x02000000 /* $fcc1 */ -#define FPU_CSR_COND2 0x04000000 /* $fcc2 */ -#define FPU_CSR_COND3 0x08000000 /* $fcc3 */ -#define FPU_CSR_COND4 0x10000000 /* $fcc4 */ -#define FPU_CSR_COND5 0x20000000 /* $fcc5 */ -#define FPU_CSR_COND6 0x40000000 /* $fcc6 */ -#define FPU_CSR_COND7 0x80000000 /* $fcc7 */ +#define FPU_CSR_FLUSH 0x01000000 /* flush denormalised results to 0 */ +#define FPU_CSR_COND 0x00800000 /* $fcc0 */ +#define FPU_CSR_COND0 0x00800000 /* $fcc0 */ +#define FPU_CSR_COND1 0x02000000 /* $fcc1 */ +#define FPU_CSR_COND2 0x04000000 /* $fcc2 */ +#define FPU_CSR_COND3 0x08000000 /* $fcc3 */ +#define FPU_CSR_COND4 0x10000000 /* $fcc4 */ +#define FPU_CSR_COND5 0x20000000 /* $fcc5 */ +#define FPU_CSR_COND6 0x40000000 /* $fcc6 */ +#define FPU_CSR_COND7 0x80000000 /* $fcc7 */ /* * X the exception cause indicator * E the exception enable * S the sticky/flag bit -*/ -#define FPU_CSR_ALL_X 0x0003f000 -#define FPU_CSR_UNI_X 0x00020000 -#define FPU_CSR_INV_X 0x00010000 -#define FPU_CSR_DIV_X 0x00008000 -#define FPU_CSR_OVF_X 0x00004000 -#define FPU_CSR_UDF_X 0x00002000 -#define FPU_CSR_INE_X 0x00001000 - -#define FPU_CSR_ALL_E 0x00000f80 -#define FPU_CSR_INV_E 0x00000800 -#define FPU_CSR_DIV_E 0x00000400 -#define FPU_CSR_OVF_E 0x00000200 -#define FPU_CSR_UDF_E 0x00000100 -#define FPU_CSR_INE_E 0x00000080 - -#define FPU_CSR_ALL_S 0x0000007c -#define FPU_CSR_INV_S 0x00000040 -#define FPU_CSR_DIV_S 0x00000020 -#define FPU_CSR_OVF_S 0x00000010 -#define FPU_CSR_UDF_S 0x00000008 -#define FPU_CSR_INE_S 0x00000004 + */ +#define FPU_CSR_ALL_X 0x0003f000 +#define FPU_CSR_UNI_X 0x00020000 +#define FPU_CSR_INV_X 0x00010000 +#define FPU_CSR_DIV_X 0x00008000 +#define FPU_CSR_OVF_X 0x00004000 +#define FPU_CSR_UDF_X 0x00002000 +#define FPU_CSR_INE_X 0x00001000 -/* rounding mode */ -#define FPU_CSR_RN 0x0 /* nearest */ -#define FPU_CSR_RZ 0x1 /* towards zero */ -#define FPU_CSR_RU 0x2 /* towards +Infinity */ -#define FPU_CSR_RD 0x3 /* towards -Infinity */ +#define FPU_CSR_ALL_E 0x00000f80 +#define FPU_CSR_INV_E 0x00000800 +#define FPU_CSR_DIV_E 0x00000400 +#define FPU_CSR_OVF_E 0x00000200 +#define FPU_CSR_UDF_E 0x00000100 +#define FPU_CSR_INE_E 0x00000080 +#define FPU_CSR_ALL_S 0x0000007c +#define FPU_CSR_INV_S 0x00000040 +#define FPU_CSR_DIV_S 0x00000020 +#define FPU_CSR_OVF_S 0x00000010 +#define FPU_CSR_UDF_S 0x00000008 +#define FPU_CSR_INE_S 0x00000004 + +/* rounding mode */ +#define FPU_CSR_RN 0x0 /* nearest */ +#define FPU_CSR_RZ 0x1 /* towards zero */ +#define FPU_CSR_RU 0x2 /* towards +Infinity */ +#define FPU_CSR_RD 0x3 /* towards -Infinity */ /* * Values for PageMask register */ -#include <linux/config.h> #ifdef CONFIG_CPU_VR41XX -#define PM_1K 0x00000000 -#define PM_4K 0x00001800 -#define PM_16K 0x00007800 -#define PM_64K 0x0001f800 -#define PM_256K 0x0007f800 -#else -#define PM_4K 0x00000000 -#define PM_16K 0x00006000 -#define PM_64K 0x0001e000 -#define PM_256K 0x0007e000 -#define PM_1M 0x001fe000 -#define PM_4M 0x007fe000 -#define PM_16M 0x01ffe000 -#endif -/* - * Values used for computation of new tlb entries - */ -#define PL_4K 12 -#define PL_16K 14 -#define PL_64K 16 -#define PL_256K 18 -#define PL_1M 20 -#define PL_4M 22 -#define PL_16M 24 +/* Why doesn't stupidity hurt ... */ -/* - * Macros to access the system control coprocessor - */ -#define read_32bit_cp0_register(source) \ -({ int __res; \ - __asm__ __volatile__( \ - ".set\tpush\n\t" \ - ".set\treorder\n\t" \ - "mfc0\t%0,"STR(source)"\n\t" \ - ".set\tpop" \ - : "=r" (__res)); \ - __res;}) +#define PM_1K 0x00000000 +#define PM_4K 0x00001800 +#define PM_16K 0x00007800 +#define PM_64K 0x0001f800 +#define PM_256K 0x0007f800 -#define read_32bit_cp0_set1_register(source) \ -({ int __res; \ - __asm__ __volatile__( \ - ".set\tpush\n\t" \ - ".set\treorder\n\t" \ - "cfc0\t%0,"STR(source)"\n\t" \ - ".set\tpop" \ - : "=r" (__res)); \ - __res;}) +#else -/* - * For now use this only with interrupts disabled! - */ -#define read_64bit_cp0_register(source) \ -({ int __res; \ - __asm__ __volatile__( \ - ".set\tmips3\n\t" \ - "dmfc0\t%0,"STR(source)"\n\t" \ - ".set\tmips0" \ - : "=r" (__res)); \ - __res;}) +#define PM_4K 0x00000000 +#define PM_16K 0x00006000 +#define PM_64K 0x0001e000 +#define PM_256K 0x0007e000 +#define PM_1M 0x001fe000 +#define PM_4M 0x007fe000 +#define PM_16M 0x01ffe000 +#define PM_64M 0x07ffe000 +#define PM_256M 0x1fffe000 -#define write_32bit_cp0_register(register,value) \ - __asm__ __volatile__( \ - "mtc0\t%0,"STR(register)"\n\t" \ - "nop" \ - : : "r" (value)); - -#define write_32bit_cp0_set1_register(register,value) \ - __asm__ __volatile__( \ - "ctc0\t%0,"STR(register)"\n\t" \ - "nop" \ - : : "r" (value)); - -#define write_64bit_cp0_register(register,value) \ - __asm__ __volatile__( \ - ".set\tmips3\n\t" \ - "dmtc0\t%0,"STR(register)"\n\t" \ - ".set\tmips0" \ - : : "r" (value)) - -/* - * This should be changed when we get a compiler that support the MIPS32 ISA. - */ -#define read_mips32_cp0_config1() \ -({ int __res; \ - __asm__ __volatile__( \ - ".set\tnoreorder\n\t" \ - ".set\tnoat\n\t" \ - ".word\t0x40018001\n\t" \ - "move\t%0,$1\n\t" \ - ".set\tat\n\t" \ - ".set\treorder" \ - :"=r" (__res)); \ - __res;}) +#endif -#define tlb_write_indexed() \ - __asm__ __volatile__( \ - ".set noreorder\n\t" \ - "tlbwi\n\t" \ -".set reorder") +/* + * Values used for computation of new tlb entries + */ +#define PL_4K 12 +#define PL_16K 14 +#define PL_64K 16 +#define PL_256K 18 +#define PL_1M 20 +#define PL_4M 22 +#define PL_16M 24 +#define PL_64M 26 +#define PL_256M 28 /* * R4x00 interrupt enable / cause bits */ -#define IE_SW0 (1<< 8) -#define IE_SW1 (1<< 9) -#define IE_IRQ0 (1<<10) -#define IE_IRQ1 (1<<11) -#define IE_IRQ2 (1<<12) -#define IE_IRQ3 (1<<13) -#define IE_IRQ4 (1<<14) -#define IE_IRQ5 (1<<15) +#define IE_SW0 (_ULCAST_(1) << 8) +#define IE_SW1 (_ULCAST_(1) << 9) +#define IE_IRQ0 (_ULCAST_(1) << 10) +#define IE_IRQ1 (_ULCAST_(1) << 11) +#define IE_IRQ2 (_ULCAST_(1) << 12) +#define IE_IRQ3 (_ULCAST_(1) << 13) +#define IE_IRQ4 (_ULCAST_(1) << 14) +#define IE_IRQ5 (_ULCAST_(1) << 15) /* * R4x00 interrupt cause bits */ -#define C_SW0 (1<< 8) -#define C_SW1 (1<< 9) -#define C_IRQ0 (1<<10) -#define C_IRQ1 (1<<11) -#define C_IRQ2 (1<<12) -#define C_IRQ3 (1<<13) -#define C_IRQ4 (1<<14) -#define C_IRQ5 (1<<15) - -#ifndef _LANGUAGE_ASSEMBLY -/* - * Manipulate the status register. - * Mostly used to access the interrupt bits. - */ -#define __BUILD_SET_CP0(name,register) \ -extern __inline__ unsigned int \ -set_cp0_##name(unsigned int set) \ -{ \ - unsigned int res; \ - \ - res = read_32bit_cp0_register(register); \ - res |= set; \ - write_32bit_cp0_register(register, res); \ - \ - return res; \ -} \ - \ -extern __inline__ unsigned int \ -clear_cp0_##name(unsigned int clear) \ -{ \ - unsigned int res; \ - \ - res = read_32bit_cp0_register(register); \ - res &= ~clear; \ - write_32bit_cp0_register(register, res); \ - \ - return res; \ -} \ - \ -extern __inline__ unsigned int \ -change_cp0_##name(unsigned int change, unsigned int new) \ -{ \ - unsigned int res; \ - \ - res = read_32bit_cp0_register(register); \ - res &= ~change; \ - res |= (new & change); \ - if(change) \ - write_32bit_cp0_register(register, res); \ - \ - return res; \ -} - -__BUILD_SET_CP0(status,CP0_STATUS) -__BUILD_SET_CP0(cause,CP0_CAUSE) -__BUILD_SET_CP0(config,CP0_CONFIG) - -#endif /* defined (_LANGUAGE_ASSEMBLY) */ +#define C_SW0 (_ULCAST_(1) << 8) +#define C_SW1 (_ULCAST_(1) << 9) +#define C_IRQ0 (_ULCAST_(1) << 10) +#define C_IRQ1 (_ULCAST_(1) << 11) +#define C_IRQ2 (_ULCAST_(1) << 12) +#define C_IRQ3 (_ULCAST_(1) << 13) +#define C_IRQ4 (_ULCAST_(1) << 14) +#define C_IRQ5 (_ULCAST_(1) << 15) /* * Bitfields in the R4xx0 cp0 status register @@ -337,9 +248,16 @@ __BUILD_SET_CP0(config,CP0_CONFIG) #define ST0_CE 0x00020000 /* + * Setting c0_status.co enables Hit_Writeback and Hit_Writeback_Invalidate + * cacheops in userspace. This bit exists only on RM7000 and RM9000 + * processors. + */ +#define ST0_CO 0x08000000 + +/* * Bitfields in the R[23]000 cp0 status register. */ -#define ST0_IEC 0x00000001 +#define ST0_IEC 0x00000001 #define ST0_KUC 0x00000002 #define ST0_IEP 0x00000004 #define ST0_KUP 0x00000008 @@ -353,9 +271,14 @@ __BUILD_SET_CP0(config,CP0_CONFIG) /* * Bits specific to the R4640/R4650 */ -#define ST0_UM (1 << 4) -#define ST0_IL (1 << 23) -#define ST0_DL (1 << 24) +#define ST0_UM (_ULCAST_(1) << 4) +#define ST0_IL (_ULCAST_(1) << 23) +#define ST0_DL (_ULCAST_(1) << 24) + +/* + * Enable the MIPS MDMX and DSP ASEs + */ +#define ST0_MX 0x01000000 /* * Bitfields in the TX39 family CP0 Configuration Register 3 @@ -395,39 +318,40 @@ __BUILD_SET_CP0(config,CP0_CONFIG) */ #define ST0_IM 0x0000ff00 #define STATUSB_IP0 8 -#define STATUSF_IP0 (1 << 8) +#define STATUSF_IP0 (_ULCAST_(1) << 8) #define STATUSB_IP1 9 -#define STATUSF_IP1 (1 << 9) +#define STATUSF_IP1 (_ULCAST_(1) << 9) #define STATUSB_IP2 10 -#define STATUSF_IP2 (1 << 10) +#define STATUSF_IP2 (_ULCAST_(1) << 10) #define STATUSB_IP3 11 -#define STATUSF_IP3 (1 << 11) +#define STATUSF_IP3 (_ULCAST_(1) << 11) #define STATUSB_IP4 12 -#define STATUSF_IP4 (1 << 12) +#define STATUSF_IP4 (_ULCAST_(1) << 12) #define STATUSB_IP5 13 -#define STATUSF_IP5 (1 << 13) +#define STATUSF_IP5 (_ULCAST_(1) << 13) #define STATUSB_IP6 14 -#define STATUSF_IP6 (1 << 14) +#define STATUSF_IP6 (_ULCAST_(1) << 14) #define STATUSB_IP7 15 -#define STATUSF_IP7 (1 << 15) +#define STATUSF_IP7 (_ULCAST_(1) << 15) #define STATUSB_IP8 0 -#define STATUSF_IP8 (1 << 0) +#define STATUSF_IP8 (_ULCAST_(1) << 0) #define STATUSB_IP9 1 -#define STATUSF_IP9 (1 << 1) +#define STATUSF_IP9 (_ULCAST_(1) << 1) #define STATUSB_IP10 2 -#define STATUSF_IP10 (1 << 2) +#define STATUSF_IP10 (_ULCAST_(1) << 2) #define STATUSB_IP11 3 -#define STATUSF_IP11 (1 << 3) +#define STATUSF_IP11 (_ULCAST_(1) << 3) #define STATUSB_IP12 4 -#define STATUSF_IP12 (1 << 4) +#define STATUSF_IP12 (_ULCAST_(1) << 4) #define STATUSB_IP13 5 -#define STATUSF_IP13 (1 << 5) +#define STATUSF_IP13 (_ULCAST_(1) << 5) #define STATUSB_IP14 6 -#define STATUSF_IP14 (1 << 6) +#define STATUSF_IP14 (_ULCAST_(1) << 6) #define STATUSB_IP15 7 -#define STATUSF_IP15 (1 << 7) +#define STATUSF_IP15 (_ULCAST_(1) << 7) #define ST0_CH 0x00040000 #define ST0_SR 0x00100000 +#define ST0_TS 0x00200000 #define ST0_BEV 0x00400000 #define ST0_RE 0x02000000 #define ST0_FR 0x04000000 @@ -444,35 +368,36 @@ __BUILD_SET_CP0(config,CP0_CONFIG) * Refer to your MIPS R4xx0 manual, chapter 5 for explanation. */ #define CAUSEB_EXCCODE 2 -#define CAUSEF_EXCCODE (31 << 2) +#define CAUSEF_EXCCODE (_ULCAST_(31) << 2) #define CAUSEB_IP 8 -#define CAUSEF_IP (255 << 8) +#define CAUSEF_IP (_ULCAST_(255) << 8) #define CAUSEB_IP0 8 -#define CAUSEF_IP0 (1 << 8) +#define CAUSEF_IP0 (_ULCAST_(1) << 8) #define CAUSEB_IP1 9 -#define CAUSEF_IP1 (1 << 9) +#define CAUSEF_IP1 (_ULCAST_(1) << 9) #define CAUSEB_IP2 10 -#define CAUSEF_IP2 (1 << 10) +#define CAUSEF_IP2 (_ULCAST_(1) << 10) #define CAUSEB_IP3 11 -#define CAUSEF_IP3 (1 << 11) +#define CAUSEF_IP3 (_ULCAST_(1) << 11) #define CAUSEB_IP4 12 -#define CAUSEF_IP4 (1 << 12) +#define CAUSEF_IP4 (_ULCAST_(1) << 12) #define CAUSEB_IP5 13 -#define CAUSEF_IP5 (1 << 13) +#define CAUSEF_IP5 (_ULCAST_(1) << 13) #define CAUSEB_IP6 14 -#define CAUSEF_IP6 (1 << 14) +#define CAUSEF_IP6 (_ULCAST_(1) << 14) #define CAUSEB_IP7 15 -#define CAUSEF_IP7 (1 << 15) +#define CAUSEF_IP7 (_ULCAST_(1) << 15) #define CAUSEB_IV 23 -#define CAUSEF_IV (1 << 23) +#define CAUSEF_IV (_ULCAST_(1) << 23) #define CAUSEB_CE 28 -#define CAUSEF_CE (3 << 28) +#define CAUSEF_CE (_ULCAST_(3) << 28) #define CAUSEB_BD 31 -#define CAUSEF_BD (1 << 31) +#define CAUSEF_BD (_ULCAST_(1) << 31) /* - * Bits in the coprozessor 0 config register. + * Bits in the coprocessor 0 config register. */ +/* Generic bits. */ #define CONF_CM_CACHABLE_NO_WA 0 #define CONF_CM_CACHABLE_WA 1 #define CONF_CM_UNCACHED 2 @@ -482,66 +407,958 @@ __BUILD_SET_CP0(config,CP0_CONFIG) #define CONF_CM_CACHABLE_CUW 6 #define CONF_CM_CACHABLE_ACCELERATED 7 #define CONF_CM_CMASK 7 -#define CONF_DB (1 << 4) -#define CONF_IB (1 << 5) -#define CONF_SC (1 << 17) -#define CONF_AC (1 << 23) -#define CONF_HALT (1 << 25) +#define CONF_BE (_ULCAST_(1) << 15) + +/* Bits common to various processors. */ +#define CONF_CU (_ULCAST_(1) << 3) +#define CONF_DB (_ULCAST_(1) << 4) +#define CONF_IB (_ULCAST_(1) << 5) +#define CONF_DC (_ULCAST_(7) << 6) +#define CONF_IC (_ULCAST_(7) << 9) +#define CONF_EB (_ULCAST_(1) << 13) +#define CONF_EM (_ULCAST_(1) << 14) +#define CONF_SM (_ULCAST_(1) << 16) +#define CONF_SC (_ULCAST_(1) << 17) +#define CONF_EW (_ULCAST_(3) << 18) +#define CONF_EP (_ULCAST_(15)<< 24) +#define CONF_EC (_ULCAST_(7) << 28) +#define CONF_CM (_ULCAST_(1) << 31) + +/* Bits specific to the R4xx0. */ +#define R4K_CONF_SW (_ULCAST_(1) << 20) +#define R4K_CONF_SS (_ULCAST_(1) << 21) +#define R4K_CONF_SB (_ULCAST_(3) << 22) + +/* Bits specific to the R5000. */ +#define R5K_CONF_SE (_ULCAST_(1) << 12) +#define R5K_CONF_SS (_ULCAST_(3) << 20) + +/* Bits specific to the RM7000. */ +#define RM7K_CONF_SE (_ULCAST_(1) << 3) +#define RM7K_CONF_TE (_ULCAST_(1) << 12) +#define RM7K_CONF_CLK (_ULCAST_(1) << 16) +#define RM7K_CONF_TC (_ULCAST_(1) << 17) +#define RM7K_CONF_SI (_ULCAST_(3) << 20) +#define RM7K_CONF_SC (_ULCAST_(1) << 31) + +/* Bits specific to the R10000. */ +#define R10K_CONF_DN (_ULCAST_(3) << 3) +#define R10K_CONF_CT (_ULCAST_(1) << 5) +#define R10K_CONF_PE (_ULCAST_(1) << 6) +#define R10K_CONF_PM (_ULCAST_(3) << 7) +#define R10K_CONF_EC (_ULCAST_(15)<< 9) +#define R10K_CONF_SB (_ULCAST_(1) << 13) +#define R10K_CONF_SK (_ULCAST_(1) << 14) +#define R10K_CONF_SS (_ULCAST_(7) << 16) +#define R10K_CONF_SC (_ULCAST_(7) << 19) +#define R10K_CONF_DC (_ULCAST_(7) << 26) +#define R10K_CONF_IC (_ULCAST_(7) << 29) + +/* Bits specific to the VR41xx. */ +#define VR41_CONF_CS (_ULCAST_(1) << 12) +#define VR41_CONF_P4K (_ULCAST_(1) << 13) +#define VR41_CONF_BP (_ULCAST_(1) << 16) +#define VR41_CONF_M16 (_ULCAST_(1) << 20) +#define VR41_CONF_AD (_ULCAST_(1) << 23) + +/* Bits specific to the R30xx. */ +#define R30XX_CONF_FDM (_ULCAST_(1) << 19) +#define R30XX_CONF_REV (_ULCAST_(1) << 22) +#define R30XX_CONF_AC (_ULCAST_(1) << 23) +#define R30XX_CONF_RF (_ULCAST_(1) << 24) +#define R30XX_CONF_HALT (_ULCAST_(1) << 25) +#define R30XX_CONF_FPINT (_ULCAST_(7) << 26) +#define R30XX_CONF_DBR (_ULCAST_(1) << 29) +#define R30XX_CONF_SB (_ULCAST_(1) << 30) +#define R30XX_CONF_LOCK (_ULCAST_(1) << 31) + +/* Bits specific to the TX49. */ +#define TX49_CONF_DC (_ULCAST_(1) << 16) +#define TX49_CONF_IC (_ULCAST_(1) << 17) /* conflict with CONF_SC */ +#define TX49_CONF_HALT (_ULCAST_(1) << 18) +#define TX49_CONF_CWFON (_ULCAST_(1) << 27) + +/* Bits specific to the MIPS32/64 PRA. */ +#define MIPS_CONF_MT (_ULCAST_(7) << 7) +#define MIPS_CONF_AR (_ULCAST_(7) << 10) +#define MIPS_CONF_AT (_ULCAST_(3) << 13) +#define MIPS_CONF_M (_ULCAST_(1) << 31) + +/* + * Bits in the MIPS32/64 PRA coprocessor 0 config registers 1 and above. + */ +#define MIPS_CONF1_FP (_ULCAST_(1) << 0) +#define MIPS_CONF1_EP (_ULCAST_(1) << 1) +#define MIPS_CONF1_CA (_ULCAST_(1) << 2) +#define MIPS_CONF1_WR (_ULCAST_(1) << 3) +#define MIPS_CONF1_PC (_ULCAST_(1) << 4) +#define MIPS_CONF1_MD (_ULCAST_(1) << 5) +#define MIPS_CONF1_C2 (_ULCAST_(1) << 6) +#define MIPS_CONF1_DA (_ULCAST_(7) << 7) +#define MIPS_CONF1_DL (_ULCAST_(7) << 10) +#define MIPS_CONF1_DS (_ULCAST_(7) << 13) +#define MIPS_CONF1_IA (_ULCAST_(7) << 16) +#define MIPS_CONF1_IL (_ULCAST_(7) << 19) +#define MIPS_CONF1_IS (_ULCAST_(7) << 22) +#define MIPS_CONF1_TLBS (_ULCAST_(63)<< 25) + +#define MIPS_CONF2_SA (_ULCAST_(15)<< 0) +#define MIPS_CONF2_SL (_ULCAST_(15)<< 4) +#define MIPS_CONF2_SS (_ULCAST_(15)<< 8) +#define MIPS_CONF2_SU (_ULCAST_(15)<< 12) +#define MIPS_CONF2_TA (_ULCAST_(15)<< 16) +#define MIPS_CONF2_TL (_ULCAST_(15)<< 20) +#define MIPS_CONF2_TS (_ULCAST_(15)<< 24) +#define MIPS_CONF2_TU (_ULCAST_(7) << 28) + +#define MIPS_CONF3_TL (_ULCAST_(1) << 0) +#define MIPS_CONF3_SM (_ULCAST_(1) << 1) +#define MIPS_CONF3_MT (_ULCAST_(1) << 2) +#define MIPS_CONF3_SP (_ULCAST_(1) << 4) +#define MIPS_CONF3_VINT (_ULCAST_(1) << 5) +#define MIPS_CONF3_VEIC (_ULCAST_(1) << 6) +#define MIPS_CONF3_LPA (_ULCAST_(1) << 7) +#define MIPS_CONF3_DSP (_ULCAST_(1) << 10) +#define MIPS_CONF3_ULRI (_ULCAST_(1) << 13) + +#define MIPS_CONF7_WII (_ULCAST_(1) << 31) + +#define MIPS_CONF7_RPS (_ULCAST_(1) << 2) + +/* + * Bits in the MIPS32/64 coprocessor 1 (FPU) revision register. + */ +#define MIPS_FPIR_S (_ULCAST_(1) << 16) +#define MIPS_FPIR_D (_ULCAST_(1) << 17) +#define MIPS_FPIR_PS (_ULCAST_(1) << 18) +#define MIPS_FPIR_3D (_ULCAST_(1) << 19) +#define MIPS_FPIR_W (_ULCAST_(1) << 20) +#define MIPS_FPIR_L (_ULCAST_(1) << 21) +#define MIPS_FPIR_F64 (_ULCAST_(1) << 22) + +#ifndef __ASSEMBLY__ + +/* + * Functions to access the R10000 performance counters. These are basically + * mfc0 and mtc0 instructions from and to coprocessor register with a 5-bit + * performance counter number encoded into bits 1 ... 5 of the instruction. + * Only performance counters 0 to 1 actually exist, so for a non-R10000 aware + * disassembler these will look like an access to sel 0 or 1. + */ +#define read_r10k_perf_cntr(counter) \ +({ \ + unsigned int __res; \ + __asm__ __volatile__( \ + "mfpc\t%0, %1" \ + : "=r" (__res) \ + : "i" (counter)); \ + \ + __res; \ +}) + +#define write_r10k_perf_cntr(counter,val) \ +do { \ + __asm__ __volatile__( \ + "mtpc\t%0, %1" \ + : \ + : "r" (val), "i" (counter)); \ +} while (0) + +#define read_r10k_perf_event(counter) \ +({ \ + unsigned int __res; \ + __asm__ __volatile__( \ + "mfps\t%0, %1" \ + : "=r" (__res) \ + : "i" (counter)); \ + \ + __res; \ +}) + +#define write_r10k_perf_cntl(counter,val) \ +do { \ + __asm__ __volatile__( \ + "mtps\t%0, %1" \ + : \ + : "r" (val), "i" (counter)); \ +} while (0) + +/* + * Macros to access the system control coprocessor + */ + +#define __read_32bit_c0_register(source, sel) \ +({ int __res; \ + if (sel == 0) \ + __asm__ __volatile__( \ + "mfc0\t%0, " #source "\n\t" \ + : "=r" (__res)); \ + else \ + __asm__ __volatile__( \ + ".set\tmips32\n\t" \ + "mfc0\t%0, " #source ", " #sel "\n\t" \ + ".set\tmips0\n\t" \ + : "=r" (__res)); \ + __res; \ +}) + +#define __read_64bit_c0_register(source, sel) \ +({ unsigned long long __res; \ + if (sizeof(unsigned long) == 4) \ + __res = __read_64bit_c0_split(source, sel); \ + else if (sel == 0) \ + __asm__ __volatile__( \ + ".set\tmips3\n\t" \ + "dmfc0\t%0, " #source "\n\t" \ + ".set\tmips0" \ + : "=r" (__res)); \ + else \ + __asm__ __volatile__( \ + ".set\tmips64\n\t" \ + "dmfc0\t%0, " #source ", " #sel "\n\t" \ + ".set\tmips0" \ + : "=r" (__res)); \ + __res; \ +}) + +#define __write_32bit_c0_register(register, sel, value) \ +do { \ + if (sel == 0) \ + __asm__ __volatile__( \ + "mtc0\t%z0, " #register "\n\t" \ + : : "Jr" ((unsigned int)(value))); \ + else \ + __asm__ __volatile__( \ + ".set\tmips32\n\t" \ + "mtc0\t%z0, " #register ", " #sel "\n\t" \ + ".set\tmips0" \ + : : "Jr" ((unsigned int)(value))); \ +} while (0) + +#define __write_64bit_c0_register(register, sel, value) \ +do { \ + if (sizeof(unsigned long) == 4) \ + __write_64bit_c0_split(register, sel, value); \ + else if (sel == 0) \ + __asm__ __volatile__( \ + ".set\tmips3\n\t" \ + "dmtc0\t%z0, " #register "\n\t" \ + ".set\tmips0" \ + : : "Jr" (value)); \ + else \ + __asm__ __volatile__( \ + ".set\tmips64\n\t" \ + "dmtc0\t%z0, " #register ", " #sel "\n\t" \ + ".set\tmips0" \ + : : "Jr" (value)); \ +} while (0) + +#define __read_ulong_c0_register(reg, sel) \ + ((sizeof(unsigned long) == 4) ? \ + (unsigned long) __read_32bit_c0_register(reg, sel) : \ + (unsigned long) __read_64bit_c0_register(reg, sel)) + +#define __write_ulong_c0_register(reg, sel, val) \ +do { \ + if (sizeof(unsigned long) == 4) \ + __write_32bit_c0_register(reg, sel, val); \ + else \ + __write_64bit_c0_register(reg, sel, val); \ +} while (0) + +/* + * On RM7000/RM9000 these are uses to access cop0 set 1 registers + */ +#define __read_32bit_c0_ctrl_register(source) \ +({ int __res; \ + __asm__ __volatile__( \ + "cfc0\t%0, " #source "\n\t" \ + : "=r" (__res)); \ + __res; \ +}) + +#define __write_32bit_c0_ctrl_register(register, value) \ +do { \ + __asm__ __volatile__( \ + "ctc0\t%z0, " #register "\n\t" \ + : : "Jr" ((unsigned int)(value))); \ +} while (0) + +/* + * These versions are only needed for systems with more than 38 bits of + * physical address space running the 32-bit kernel. That's none atm :-) + */ +#define __read_64bit_c0_split(source, sel) \ +({ \ + unsigned long long __val; \ + unsigned long __flags; \ + \ + local_irq_save(__flags); \ + if (sel == 0) \ + __asm__ __volatile__( \ + ".set\tmips64\n\t" \ + "dmfc0\t%M0, " #source "\n\t" \ + "dsll\t%L0, %M0, 32\n\t" \ + "dsrl\t%M0, %M0, 32\n\t" \ + "dsrl\t%L0, %L0, 32\n\t" \ + ".set\tmips0" \ + : "=r" (__val)); \ + else \ + __asm__ __volatile__( \ + ".set\tmips64\n\t" \ + "dmfc0\t%M0, " #source ", " #sel "\n\t" \ + "dsll\t%L0, %M0, 32\n\t" \ + "dsrl\t%M0, %M0, 32\n\t" \ + "dsrl\t%L0, %L0, 32\n\t" \ + ".set\tmips0" \ + : "=r" (__val)); \ + local_irq_restore(__flags); \ + \ + __val; \ +}) + +#define __write_64bit_c0_split(source, sel, val) \ +do { \ + unsigned long __flags; \ + \ + local_irq_save(__flags); \ + if (sel == 0) \ + __asm__ __volatile__( \ + ".set\tmips64\n\t" \ + "dsll\t%L0, %L0, 32\n\t" \ + "dsrl\t%L0, %L0, 32\n\t" \ + "dsll\t%M0, %M0, 32\n\t" \ + "or\t%L0, %L0, %M0\n\t" \ + "dmtc0\t%L0, " #source "\n\t" \ + ".set\tmips0" \ + : : "r" (val)); \ + else \ + __asm__ __volatile__( \ + ".set\tmips64\n\t" \ + "dsll\t%L0, %L0, 32\n\t" \ + "dsrl\t%L0, %L0, 32\n\t" \ + "dsll\t%M0, %M0, 32\n\t" \ + "or\t%L0, %L0, %M0\n\t" \ + "dmtc0\t%L0, " #source ", " #sel "\n\t" \ + ".set\tmips0" \ + : : "r" (val)); \ + local_irq_restore(__flags); \ +} while (0) + +#define read_c0_index() __read_32bit_c0_register($0, 0) +#define write_c0_index(val) __write_32bit_c0_register($0, 0, val) + +#define read_c0_entrylo0() __read_ulong_c0_register($2, 0) +#define write_c0_entrylo0(val) __write_ulong_c0_register($2, 0, val) + +#define read_c0_entrylo1() __read_ulong_c0_register($3, 0) +#define write_c0_entrylo1(val) __write_ulong_c0_register($3, 0, val) + +#define read_c0_conf() __read_32bit_c0_register($3, 0) +#define write_c0_conf(val) __write_32bit_c0_register($3, 0, val) + +#define read_c0_context() __read_ulong_c0_register($4, 0) +#define write_c0_context(val) __write_ulong_c0_register($4, 0, val) + +#define read_c0_userlocal() __read_ulong_c0_register($4, 2) +#define write_c0_userlocal(val) __write_ulong_c0_register($4, 2, val) + +#define read_c0_pagemask() __read_32bit_c0_register($5, 0) +#define write_c0_pagemask(val) __write_32bit_c0_register($5, 0, val) + +#define read_c0_wired() __read_32bit_c0_register($6, 0) +#define write_c0_wired(val) __write_32bit_c0_register($6, 0, val) + +#define read_c0_info() __read_32bit_c0_register($7, 0) + +#define read_c0_cache() __read_32bit_c0_register($7, 0) /* TX39xx */ +#define write_c0_cache(val) __write_32bit_c0_register($7, 0, val) + +#define read_c0_badvaddr() __read_ulong_c0_register($8, 0) +#define write_c0_badvaddr(val) __write_ulong_c0_register($8, 0, val) + +#define read_c0_count() __read_32bit_c0_register($9, 0) +#define write_c0_count(val) __write_32bit_c0_register($9, 0, val) + +#define read_c0_count2() __read_32bit_c0_register($9, 6) /* pnx8550 */ +#define write_c0_count2(val) __write_32bit_c0_register($9, 6, val) + +#define read_c0_count3() __read_32bit_c0_register($9, 7) /* pnx8550 */ +#define write_c0_count3(val) __write_32bit_c0_register($9, 7, val) + +#define read_c0_entryhi() __read_ulong_c0_register($10, 0) +#define write_c0_entryhi(val) __write_ulong_c0_register($10, 0, val) + +#define read_c0_compare() __read_32bit_c0_register($11, 0) +#define write_c0_compare(val) __write_32bit_c0_register($11, 0, val) + +#define read_c0_compare2() __read_32bit_c0_register($11, 6) /* pnx8550 */ +#define write_c0_compare2(val) __write_32bit_c0_register($11, 6, val) + +#define read_c0_compare3() __read_32bit_c0_register($11, 7) /* pnx8550 */ +#define write_c0_compare3(val) __write_32bit_c0_register($11, 7, val) + +#define read_c0_status() __read_32bit_c0_register($12, 0) +#ifdef CONFIG_MIPS_MT_SMTC +#define write_c0_status(val) \ +do { \ + __write_32bit_c0_register($12, 0, val); \ + __ehb(); \ +} while (0) +#else +/* + * Legacy non-SMTC code, which may be hazardous + * but which might not support EHB + */ +#define write_c0_status(val) __write_32bit_c0_register($12, 0, val) +#endif /* CONFIG_MIPS_MT_SMTC */ + +#define read_c0_cause() __read_32bit_c0_register($13, 0) +#define write_c0_cause(val) __write_32bit_c0_register($13, 0, val) + +#define read_c0_epc() __read_ulong_c0_register($14, 0) +#define write_c0_epc(val) __write_ulong_c0_register($14, 0, val) + +#define read_c0_prid() __read_32bit_c0_register($15, 0) + +#define read_c0_config() __read_32bit_c0_register($16, 0) +#define read_c0_config1() __read_32bit_c0_register($16, 1) +#define read_c0_config2() __read_32bit_c0_register($16, 2) +#define read_c0_config3() __read_32bit_c0_register($16, 3) +#define read_c0_config4() __read_32bit_c0_register($16, 4) +#define read_c0_config5() __read_32bit_c0_register($16, 5) +#define read_c0_config6() __read_32bit_c0_register($16, 6) +#define read_c0_config7() __read_32bit_c0_register($16, 7) +#define write_c0_config(val) __write_32bit_c0_register($16, 0, val) +#define write_c0_config1(val) __write_32bit_c0_register($16, 1, val) +#define write_c0_config2(val) __write_32bit_c0_register($16, 2, val) +#define write_c0_config3(val) __write_32bit_c0_register($16, 3, val) +#define write_c0_config4(val) __write_32bit_c0_register($16, 4, val) +#define write_c0_config5(val) __write_32bit_c0_register($16, 5, val) +#define write_c0_config6(val) __write_32bit_c0_register($16, 6, val) +#define write_c0_config7(val) __write_32bit_c0_register($16, 7, val) + +/* + * The WatchLo register. There may be upto 8 of them. + */ +#define read_c0_watchlo0() __read_ulong_c0_register($18, 0) +#define read_c0_watchlo1() __read_ulong_c0_register($18, 1) +#define read_c0_watchlo2() __read_ulong_c0_register($18, 2) +#define read_c0_watchlo3() __read_ulong_c0_register($18, 3) +#define read_c0_watchlo4() __read_ulong_c0_register($18, 4) +#define read_c0_watchlo5() __read_ulong_c0_register($18, 5) +#define read_c0_watchlo6() __read_ulong_c0_register($18, 6) +#define read_c0_watchlo7() __read_ulong_c0_register($18, 7) +#define write_c0_watchlo0(val) __write_ulong_c0_register($18, 0, val) +#define write_c0_watchlo1(val) __write_ulong_c0_register($18, 1, val) +#define write_c0_watchlo2(val) __write_ulong_c0_register($18, 2, val) +#define write_c0_watchlo3(val) __write_ulong_c0_register($18, 3, val) +#define write_c0_watchlo4(val) __write_ulong_c0_register($18, 4, val) +#define write_c0_watchlo5(val) __write_ulong_c0_register($18, 5, val) +#define write_c0_watchlo6(val) __write_ulong_c0_register($18, 6, val) +#define write_c0_watchlo7(val) __write_ulong_c0_register($18, 7, val) + +/* + * The WatchHi register. There may be upto 8 of them. + */ +#define read_c0_watchhi0() __read_32bit_c0_register($19, 0) +#define read_c0_watchhi1() __read_32bit_c0_register($19, 1) +#define read_c0_watchhi2() __read_32bit_c0_register($19, 2) +#define read_c0_watchhi3() __read_32bit_c0_register($19, 3) +#define read_c0_watchhi4() __read_32bit_c0_register($19, 4) +#define read_c0_watchhi5() __read_32bit_c0_register($19, 5) +#define read_c0_watchhi6() __read_32bit_c0_register($19, 6) +#define read_c0_watchhi7() __read_32bit_c0_register($19, 7) + +#define write_c0_watchhi0(val) __write_32bit_c0_register($19, 0, val) +#define write_c0_watchhi1(val) __write_32bit_c0_register($19, 1, val) +#define write_c0_watchhi2(val) __write_32bit_c0_register($19, 2, val) +#define write_c0_watchhi3(val) __write_32bit_c0_register($19, 3, val) +#define write_c0_watchhi4(val) __write_32bit_c0_register($19, 4, val) +#define write_c0_watchhi5(val) __write_32bit_c0_register($19, 5, val) +#define write_c0_watchhi6(val) __write_32bit_c0_register($19, 6, val) +#define write_c0_watchhi7(val) __write_32bit_c0_register($19, 7, val) + +#define read_c0_xcontext() __read_ulong_c0_register($20, 0) +#define write_c0_xcontext(val) __write_ulong_c0_register($20, 0, val) + +#define read_c0_intcontrol() __read_32bit_c0_ctrl_register($20) +#define write_c0_intcontrol(val) __write_32bit_c0_ctrl_register($20, val) + +#define read_c0_framemask() __read_32bit_c0_register($21, 0) +#define write_c0_framemask(val) __write_32bit_c0_register($21, 0, val) + +/* RM9000 PerfControl performance counter control register */ +#define read_c0_perfcontrol() __read_32bit_c0_register($22, 0) +#define write_c0_perfcontrol(val) __write_32bit_c0_register($22, 0, val) + +#define read_c0_diag() __read_32bit_c0_register($22, 0) +#define write_c0_diag(val) __write_32bit_c0_register($22, 0, val) + +#define read_c0_diag1() __read_32bit_c0_register($22, 1) +#define write_c0_diag1(val) __write_32bit_c0_register($22, 1, val) + +#define read_c0_diag2() __read_32bit_c0_register($22, 2) +#define write_c0_diag2(val) __write_32bit_c0_register($22, 2, val) + +#define read_c0_diag3() __read_32bit_c0_register($22, 3) +#define write_c0_diag3(val) __write_32bit_c0_register($22, 3, val) + +#define read_c0_diag4() __read_32bit_c0_register($22, 4) +#define write_c0_diag4(val) __write_32bit_c0_register($22, 4, val) + +#define read_c0_diag5() __read_32bit_c0_register($22, 5) +#define write_c0_diag5(val) __write_32bit_c0_register($22, 5, val) + +#define read_c0_debug() __read_32bit_c0_register($23, 0) +#define write_c0_debug(val) __write_32bit_c0_register($23, 0, val) + +#define read_c0_depc() __read_ulong_c0_register($24, 0) +#define write_c0_depc(val) __write_ulong_c0_register($24, 0, val) + +/* + * MIPS32 / MIPS64 performance counters + */ +#define read_c0_perfctrl0() __read_32bit_c0_register($25, 0) +#define write_c0_perfctrl0(val) __write_32bit_c0_register($25, 0, val) +#define read_c0_perfcntr0() __read_32bit_c0_register($25, 1) +#define write_c0_perfcntr0(val) __write_32bit_c0_register($25, 1, val) +#define read_c0_perfctrl1() __read_32bit_c0_register($25, 2) +#define write_c0_perfctrl1(val) __write_32bit_c0_register($25, 2, val) +#define read_c0_perfcntr1() __read_32bit_c0_register($25, 3) +#define write_c0_perfcntr1(val) __write_32bit_c0_register($25, 3, val) +#define read_c0_perfctrl2() __read_32bit_c0_register($25, 4) +#define write_c0_perfctrl2(val) __write_32bit_c0_register($25, 4, val) +#define read_c0_perfcntr2() __read_32bit_c0_register($25, 5) +#define write_c0_perfcntr2(val) __write_32bit_c0_register($25, 5, val) +#define read_c0_perfctrl3() __read_32bit_c0_register($25, 6) +#define write_c0_perfctrl3(val) __write_32bit_c0_register($25, 6, val) +#define read_c0_perfcntr3() __read_32bit_c0_register($25, 7) +#define write_c0_perfcntr3(val) __write_32bit_c0_register($25, 7, val) + +/* RM9000 PerfCount performance counter register */ +#define read_c0_perfcount() __read_64bit_c0_register($25, 0) +#define write_c0_perfcount(val) __write_64bit_c0_register($25, 0, val) + +#define read_c0_ecc() __read_32bit_c0_register($26, 0) +#define write_c0_ecc(val) __write_32bit_c0_register($26, 0, val) + +#define read_c0_derraddr0() __read_ulong_c0_register($26, 1) +#define write_c0_derraddr0(val) __write_ulong_c0_register($26, 1, val) + +#define read_c0_cacheerr() __read_32bit_c0_register($27, 0) + +#define read_c0_derraddr1() __read_ulong_c0_register($27, 1) +#define write_c0_derraddr1(val) __write_ulong_c0_register($27, 1, val) + +#define read_c0_taglo() __read_32bit_c0_register($28, 0) +#define write_c0_taglo(val) __write_32bit_c0_register($28, 0, val) + +#define read_c0_dtaglo() __read_32bit_c0_register($28, 2) +#define write_c0_dtaglo(val) __write_32bit_c0_register($28, 2, val) + +#define read_c0_taghi() __read_32bit_c0_register($29, 0) +#define write_c0_taghi(val) __write_32bit_c0_register($29, 0, val) + +#define read_c0_errorepc() __read_ulong_c0_register($30, 0) +#define write_c0_errorepc(val) __write_ulong_c0_register($30, 0, val) + +/* MIPSR2 */ +#define read_c0_hwrena() __read_32bit_c0_register($7, 0) +#define write_c0_hwrena(val) __write_32bit_c0_register($7, 0, val) + +#define read_c0_intctl() __read_32bit_c0_register($12, 1) +#define write_c0_intctl(val) __write_32bit_c0_register($12, 1, val) + +#define read_c0_srsctl() __read_32bit_c0_register($12, 2) +#define write_c0_srsctl(val) __write_32bit_c0_register($12, 2, val) + +#define read_c0_srsmap() __read_32bit_c0_register($12, 3) +#define write_c0_srsmap(val) __write_32bit_c0_register($12, 3, val) + +#define read_c0_ebase() __read_32bit_c0_register($15, 1) +#define write_c0_ebase(val) __write_32bit_c0_register($15, 1, val) /* - * R10000 performance counter definitions. + * Macros to access the floating point coprocessor control registers + */ +#define read_32bit_cp1_register(source) \ +({ int __res; \ + __asm__ __volatile__( \ + ".set\tpush\n\t" \ + ".set\treorder\n\t" \ + "cfc1\t%0,"STR(source)"\n\t" \ + ".set\tpop" \ + : "=r" (__res)); \ + __res;}) + +#define rddsp(mask) \ +({ \ + unsigned int __res; \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " # rddsp $1, %x1 \n" \ + " .word 0x7c000cb8 | (%x1 << 16) \n" \ + " move %0, $1 \n" \ + " .set pop \n" \ + : "=r" (__res) \ + : "i" (mask)); \ + __res; \ +}) + +#define wrdsp(val, mask) \ +do { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " move $1, %0 \n" \ + " # wrdsp $1, %x1 \n" \ + " .word 0x7c2004f8 | (%x1 << 11) \n" \ + " .set pop \n" \ + : \ + : "r" (val), "i" (mask)); \ +} while (0) + +#define mfhi0() \ +({ \ + unsigned long __treg; \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " # mfhi %0, $ac0 \n" \ + " .word 0x00000810 \n" \ + " move %0, $1 \n" \ + " .set pop \n" \ + : "=r" (__treg)); \ + __treg; \ +}) + +#define mfhi1() \ +({ \ + unsigned long __treg; \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " # mfhi %0, $ac1 \n" \ + " .word 0x00200810 \n" \ + " move %0, $1 \n" \ + " .set pop \n" \ + : "=r" (__treg)); \ + __treg; \ +}) + +#define mfhi2() \ +({ \ + unsigned long __treg; \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " # mfhi %0, $ac2 \n" \ + " .word 0x00400810 \n" \ + " move %0, $1 \n" \ + " .set pop \n" \ + : "=r" (__treg)); \ + __treg; \ +}) + +#define mfhi3() \ +({ \ + unsigned long __treg; \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " # mfhi %0, $ac3 \n" \ + " .word 0x00600810 \n" \ + " move %0, $1 \n" \ + " .set pop \n" \ + : "=r" (__treg)); \ + __treg; \ +}) + +#define mflo0() \ +({ \ + unsigned long __treg; \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " # mflo %0, $ac0 \n" \ + " .word 0x00000812 \n" \ + " move %0, $1 \n" \ + " .set pop \n" \ + : "=r" (__treg)); \ + __treg; \ +}) + +#define mflo1() \ +({ \ + unsigned long __treg; \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " # mflo %0, $ac1 \n" \ + " .word 0x00200812 \n" \ + " move %0, $1 \n" \ + " .set pop \n" \ + : "=r" (__treg)); \ + __treg; \ +}) + +#define mflo2() \ +({ \ + unsigned long __treg; \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " # mflo %0, $ac2 \n" \ + " .word 0x00400812 \n" \ + " move %0, $1 \n" \ + " .set pop \n" \ + : "=r" (__treg)); \ + __treg; \ +}) + +#define mflo3() \ +({ \ + unsigned long __treg; \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " # mflo %0, $ac3 \n" \ + " .word 0x00600812 \n" \ + " move %0, $1 \n" \ + " .set pop \n" \ + : "=r" (__treg)); \ + __treg; \ +}) + +#define mthi0(x) \ +do { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " move $1, %0 \n" \ + " # mthi $1, $ac0 \n" \ + " .word 0x00200011 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +} while (0) + +#define mthi1(x) \ +do { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " move $1, %0 \n" \ + " # mthi $1, $ac1 \n" \ + " .word 0x00200811 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +} while (0) + +#define mthi2(x) \ +do { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " move $1, %0 \n" \ + " # mthi $1, $ac2 \n" \ + " .word 0x00201011 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +} while (0) + +#define mthi3(x) \ +do { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " move $1, %0 \n" \ + " # mthi $1, $ac3 \n" \ + " .word 0x00201811 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +} while (0) + +#define mtlo0(x) \ +do { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " move $1, %0 \n" \ + " # mtlo $1, $ac0 \n" \ + " .word 0x00200013 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +} while (0) + +#define mtlo1(x) \ +do { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " move $1, %0 \n" \ + " # mtlo $1, $ac1 \n" \ + " .word 0x00200813 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +} while (0) + +#define mtlo2(x) \ +do { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " move $1, %0 \n" \ + " # mtlo $1, $ac2 \n" \ + " .word 0x00201013 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +} while (0) + +#define mtlo3(x) \ +do { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " move $1, %0 \n" \ + " # mtlo $1, $ac3 \n" \ + " .word 0x00201813 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +} while (0) + +/* + * TLB operations. * - * FIXME: The R10000 performance counter opens a nice way to implement CPU - * time accounting with a precission of one cycle. I don't have - * R10000 silicon but just a manual, so ... - */ - -/* - * Events counted by counter #0 - */ -#define CE0_CYCLES 0 -#define CE0_INSN_ISSUED 1 -#define CE0_LPSC_ISSUED 2 -#define CE0_S_ISSUED 3 -#define CE0_SC_ISSUED 4 -#define CE0_SC_FAILED 5 -#define CE0_BRANCH_DECODED 6 -#define CE0_QW_WB_SECONDARY 7 -#define CE0_CORRECTED_ECC_ERRORS 8 -#define CE0_ICACHE_MISSES 9 -#define CE0_SCACHE_I_MISSES 10 -#define CE0_SCACHE_I_WAY_MISSPREDICTED 11 -#define CE0_EXT_INTERVENTIONS_REQ 12 -#define CE0_EXT_INVALIDATE_REQ 13 -#define CE0_VIRTUAL_COHERENCY_COND 14 -#define CE0_INSN_GRADUATED 15 - -/* - * Events counted by counter #1 - */ -#define CE1_CYCLES 0 -#define CE1_INSN_GRADUATED 1 -#define CE1_LPSC_GRADUATED 2 -#define CE1_S_GRADUATED 3 -#define CE1_SC_GRADUATED 4 -#define CE1_FP_INSN_GRADUATED 5 -#define CE1_QW_WB_PRIMARY 6 -#define CE1_TLB_REFILL 7 -#define CE1_BRANCH_MISSPREDICTED 8 -#define CE1_DCACHE_MISS 9 -#define CE1_SCACHE_D_MISSES 10 -#define CE1_SCACHE_D_WAY_MISSPREDICTED 11 -#define CE1_EXT_INTERVENTION_HITS 12 -#define CE1_EXT_INVALIDATE_REQ 13 -#define CE1_SP_HINT_TO_CEXCL_SC_BLOCKS 14 -#define CE1_SP_HINT_TO_SHARED_SC_BLOCKS 15 - -/* - * These flags define in which priviledge mode the counters count events - */ -#define CEB_USER 8 /* Count events in user mode, EXL = ERL = 0 */ -#define CEB_SUPERVISOR 4 /* Count events in supvervisor mode EXL = ERL = 0 */ -#define CEB_KERNEL 2 /* Count events in kernel mode EXL = ERL = 0 */ -#define CEB_EXL 1 /* Count events with EXL = 1, ERL = 0 */ + * It is responsibility of the caller to take care of any TLB hazards. + */ +static inline void tlb_probe(void) +{ + __asm__ __volatile__( + ".set noreorder\n\t" + "tlbp\n\t" + ".set reorder"); +} + +static inline void tlb_read(void) +{ +#if MIPS34K_MISSED_ITLB_WAR + int res = 0; + + __asm__ __volatile__( + " .set push \n" + " .set noreorder \n" + " .set noat \n" + " .set mips32r2 \n" + " .word 0x41610001 # dvpe $1 \n" + " move %0, $1 \n" + " ehb \n" + " .set pop \n" + : "=r" (res)); + + instruction_hazard(); +#endif + + __asm__ __volatile__( + ".set noreorder\n\t" + "tlbr\n\t" + ".set reorder"); + +#if MIPS34K_MISSED_ITLB_WAR + if ((res & _ULCAST_(1))) + __asm__ __volatile__( + " .set push \n" + " .set noreorder \n" + " .set noat \n" + " .set mips32r2 \n" + " .word 0x41600021 # evpe \n" + " ehb \n" + " .set pop \n"); +#endif +} + +static inline void tlb_write_indexed(void) +{ + __asm__ __volatile__( + ".set noreorder\n\t" + "tlbwi\n\t" + ".set reorder"); +} + +static inline void tlb_write_random(void) +{ + __asm__ __volatile__( + ".set noreorder\n\t" + "tlbwr\n\t" + ".set reorder"); +} + +/* + * Manipulate bits in a c0 register. + */ +#define __BUILD_SET_C0(name) \ +static inline unsigned int \ +set_c0_##name(unsigned int set) \ +{ \ + unsigned int res; \ + \ + res = read_c0_##name(); \ + res |= set; \ + write_c0_##name(res); \ + \ + return res; \ +} \ + \ +static inline unsigned int \ +clear_c0_##name(unsigned int clear) \ +{ \ + unsigned int res; \ + \ + res = read_c0_##name(); \ + res &= ~clear; \ + write_c0_##name(res); \ + \ + return res; \ +} \ + \ +static inline unsigned int \ +change_c0_##name(unsigned int change, unsigned int new) \ +{ \ + unsigned int res; \ + \ + res = read_c0_##name(); \ + res &= ~change; \ + res |= (new & change); \ + write_c0_##name(res); \ + \ + return res; \ +} + +__BUILD_SET_C0(status) +__BUILD_SET_C0(cause) +__BUILD_SET_C0(config) +__BUILD_SET_C0(intcontrol) +__BUILD_SET_C0(intctl) +__BUILD_SET_C0(srsmap) + +#endif /* !__ASSEMBLY__ */ #endif /* _ASM_MIPSREGS_H */ diff --git a/include/asm-ppc/bitops.h b/include/asm-ppc/bitops.h index 3264915d89..4e9c608341 100644 --- a/include/asm-ppc/bitops.h +++ b/include/asm-ppc/bitops.h @@ -287,7 +287,7 @@ extern __inline__ int ext2_test_bit(int nr, __const__ void * addr) #define ext2_find_first_zero_bit(addr, size) \ ext2_find_next_zero_bit((addr), (size), 0) -extern __inline__ unsigned long ext2_find_next_zero_bit(void *addr, +static __inline__ unsigned long ext2_find_next_zero_bit(void *addr, unsigned long size, unsigned long offset) { unsigned int *p = ((unsigned int *) addr) + (offset >> 5); diff --git a/include/asm-ppc/fsl_law.h b/include/asm-ppc/fsl_law.h index e955c756e8..227bf8326c 100644 --- a/include/asm-ppc/fsl_law.h +++ b/include/asm-ppc/fsl_law.h @@ -6,6 +6,9 @@ #define SET_LAW_ENTRY(idx, a, sz, trgt) \ { .index = idx, .addr = a, .size = sz, .trgt_id = trgt } +#define SET_LAW(a, sz, trgt) \ + { .index = -1, .addr = a, .size = sz, .trgt_id = trgt } + enum law_size { LAW_SIZE_4K = 0xb, LAW_SIZE_8K, @@ -70,6 +73,8 @@ struct law_entry { }; extern void set_law(u8 idx, phys_addr_t addr, enum law_size sz, enum law_trgt_if id); +extern int set_next_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id); +extern int set_last_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id); extern void disable_law(u8 idx); extern void init_laws(void); extern void print_laws(void); diff --git a/include/asm-ppc/fsl_lbc.h b/include/asm-ppc/fsl_lbc.h new file mode 100644 index 0000000000..c4af7971b1 --- /dev/null +++ b/include/asm-ppc/fsl_lbc.h @@ -0,0 +1,301 @@ +/* + * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#ifndef __ASM_PPC_FSL_LBC_H +#define __ASM_PPC_FSL_LBC_H + +#include <config.h> + +/* BR - Base Registers + */ +#define BR0 0x5000 /* Register offset to immr */ +#define BR1 0x5008 +#define BR2 0x5010 +#define BR3 0x5018 +#define BR4 0x5020 +#define BR5 0x5028 +#define BR6 0x5030 +#define BR7 0x5038 + +#define BR_BA 0xFFFF8000 +#define BR_BA_SHIFT 15 +#define BR_PS 0x00001800 +#define BR_PS_SHIFT 11 +#define BR_PS_8 0x00000800 /* Port Size 8 bit */ +#define BR_PS_16 0x00001000 /* Port Size 16 bit */ +#define BR_PS_32 0x00001800 /* Port Size 32 bit */ +#define BR_DECC 0x00000600 +#define BR_DECC_SHIFT 9 +#define BR_DECC_OFF 0x00000000 +#define BR_DECC_CHK 0x00000200 +#define BR_DECC_CHK_GEN 0x00000400 +#define BR_WP 0x00000100 +#define BR_WP_SHIFT 8 +#define BR_MSEL 0x000000E0 +#define BR_MSEL_SHIFT 5 +#define BR_MS_GPCM 0x00000000 /* GPCM */ +#define BR_MS_FCM 0x00000020 /* FCM */ +#ifdef CONFIG_MPC83xx +#define BR_MS_SDRAM 0x00000060 /* SDRAM */ +#elif defined(CONFIG_MPC85xx) +#define BR_MS_SDRAM 0x00000000 /* SDRAM */ +#endif +#define BR_MS_UPMA 0x00000080 /* UPMA */ +#define BR_MS_UPMB 0x000000A0 /* UPMB */ +#define BR_MS_UPMC 0x000000C0 /* UPMC */ +#if !defined(CONFIG_MPC834X) +#define BR_ATOM 0x0000000C +#define BR_ATOM_SHIFT 2 +#endif +#define BR_V 0x00000001 +#define BR_V_SHIFT 0 + +#define UPMA 0 +#define UPMB 1 +#define UPMC 2 + +#if defined(CONFIG_MPC834X) +#define BR_RES ~(BR_BA | BR_PS | BR_DECC | BR_WP | BR_MSEL | BR_V) +#else +#define BR_RES ~(BR_BA | BR_PS | BR_DECC | BR_WP | BR_MSEL | BR_ATOM | BR_V) +#endif + +/* OR - Option Registers + */ +#define OR0 0x5004 /* Register offset to immr */ +#define OR1 0x500C +#define OR2 0x5014 +#define OR3 0x501C +#define OR4 0x5024 +#define OR5 0x502C +#define OR6 0x5034 +#define OR7 0x503C + +#define OR_GPCM_AM 0xFFFF8000 +#define OR_GPCM_AM_SHIFT 15 +#define OR_GPCM_BCTLD 0x00001000 +#define OR_GPCM_BCTLD_SHIFT 12 +#define OR_GPCM_CSNT 0x00000800 +#define OR_GPCM_CSNT_SHIFT 11 +#define OR_GPCM_ACS 0x00000600 +#define OR_GPCM_ACS_SHIFT 9 +#define OR_GPCM_ACS_DIV2 0x00000600 +#define OR_GPCM_ACS_DIV4 0x00000400 +#define OR_GPCM_XACS 0x00000100 +#define OR_GPCM_XACS_SHIFT 8 +#define OR_GPCM_SCY 0x000000F0 +#define OR_GPCM_SCY_SHIFT 4 +#define OR_GPCM_SCY_1 0x00000010 +#define OR_GPCM_SCY_2 0x00000020 +#define OR_GPCM_SCY_3 0x00000030 +#define OR_GPCM_SCY_4 0x00000040 +#define OR_GPCM_SCY_5 0x00000050 +#define OR_GPCM_SCY_6 0x00000060 +#define OR_GPCM_SCY_7 0x00000070 +#define OR_GPCM_SCY_8 0x00000080 +#define OR_GPCM_SCY_9 0x00000090 +#define OR_GPCM_SCY_10 0x000000a0 +#define OR_GPCM_SCY_11 0x000000b0 +#define OR_GPCM_SCY_12 0x000000c0 +#define OR_GPCM_SCY_13 0x000000d0 +#define OR_GPCM_SCY_14 0x000000e0 +#define OR_GPCM_SCY_15 0x000000f0 +#define OR_GPCM_SETA 0x00000008 +#define OR_GPCM_SETA_SHIFT 3 +#define OR_GPCM_TRLX 0x00000004 +#define OR_GPCM_TRLX_SHIFT 2 +#define OR_GPCM_EHTR 0x00000002 +#define OR_GPCM_EHTR_SHIFT 1 +#define OR_GPCM_EAD 0x00000001 +#define OR_GPCM_EAD_SHIFT 0 + +/* helpers to convert values into an OR address mask (GPCM mode) */ +#define P2SZ_TO_AM(s) ((~((s) - 1)) & 0xffff8000) /* must be pow of 2 */ +#define MEG_TO_AM(m) P2SZ_TO_AM((m) << 20) + +#define OR_FCM_AM 0xFFFF8000 +#define OR_FCM_AM_SHIFT 15 +#define OR_FCM_BCTLD 0x00001000 +#define OR_FCM_BCTLD_SHIFT 12 +#define OR_FCM_PGS 0x00000400 +#define OR_FCM_PGS_SHIFT 10 +#define OR_FCM_CSCT 0x00000200 +#define OR_FCM_CSCT_SHIFT 9 +#define OR_FCM_CST 0x00000100 +#define OR_FCM_CST_SHIFT 8 +#define OR_FCM_CHT 0x00000080 +#define OR_FCM_CHT_SHIFT 7 +#define OR_FCM_SCY 0x00000070 +#define OR_FCM_SCY_SHIFT 4 +#define OR_FCM_SCY_1 0x00000010 +#define OR_FCM_SCY_2 0x00000020 +#define OR_FCM_SCY_3 0x00000030 +#define OR_FCM_SCY_4 0x00000040 +#define OR_FCM_SCY_5 0x00000050 +#define OR_FCM_SCY_6 0x00000060 +#define OR_FCM_SCY_7 0x00000070 +#define OR_FCM_RST 0x00000008 +#define OR_FCM_RST_SHIFT 3 +#define OR_FCM_TRLX 0x00000004 +#define OR_FCM_TRLX_SHIFT 2 +#define OR_FCM_EHTR 0x00000002 +#define OR_FCM_EHTR_SHIFT 1 + +#define OR_UPM_AM 0xFFFF8000 +#define OR_UPM_AM_SHIFT 15 +#define OR_UPM_XAM 0x00006000 +#define OR_UPM_XAM_SHIFT 13 +#define OR_UPM_BCTLD 0x00001000 +#define OR_UPM_BCTLD_SHIFT 12 +#define OR_UPM_BI 0x00000100 +#define OR_UPM_BI_SHIFT 8 +#define OR_UPM_TRLX 0x00000004 +#define OR_UPM_TRLX_SHIFT 2 +#define OR_UPM_EHTR 0x00000002 +#define OR_UPM_EHTR_SHIFT 1 +#define OR_UPM_EAD 0x00000001 +#define OR_UPM_EAD_SHIFT 0 + +#define OR_SDRAM_AM 0xFFFF8000 +#define OR_SDRAM_AM_SHIFT 15 +#define OR_SDRAM_XAM 0x00006000 +#define OR_SDRAM_XAM_SHIFT 13 +#define OR_SDRAM_COLS 0x00001C00 +#define OR_SDRAM_COLS_SHIFT 10 +#define OR_SDRAM_ROWS 0x000001C0 +#define OR_SDRAM_ROWS_SHIFT 6 +#define OR_SDRAM_PMSEL 0x00000020 +#define OR_SDRAM_PMSEL_SHIFT 5 +#define OR_SDRAM_EAD 0x00000001 +#define OR_SDRAM_EAD_SHIFT 0 + +#define OR_AM_32KB 0xFFFF8000 +#define OR_AM_64KB 0xFFFF0000 +#define OR_AM_128KB 0xFFFE0000 +#define OR_AM_256KB 0xFFFC0000 +#define OR_AM_512KB 0xFFF80000 +#define OR_AM_1MB 0xFFF00000 +#define OR_AM_2MB 0xFFE00000 +#define OR_AM_4MB 0xFFC00000 +#define OR_AM_8MB 0xFF800000 +#define OR_AM_16MB 0xFF000000 +#define OR_AM_32MB 0xFE000000 +#define OR_AM_64MB 0xFC000000 +#define OR_AM_128MB 0xF8000000 +#define OR_AM_256MB 0xF0000000 +#define OR_AM_512MB 0xE0000000 +#define OR_AM_1GB 0xC0000000 +#define OR_AM_2GB 0x80000000 +#define OR_AM_4GB 0x00000000 + +/* MxMR - UPM Machine A/B/C Mode Registers + */ +#define MxMR_MAD_MSK 0x0000003f /* Machine Address Mask */ +#define MxMR_TLFx_MSK 0x000003c0 /* Refresh Loop Field Mask */ +#define MxMR_WLFx_MSK 0x00003c00 /* Write Loop Field Mask */ +#define MxMR_WLFx_1X 0x00000400 /* executed 1 time */ +#define MxMR_WLFx_2X 0x00000800 /* executed 2 times */ +#define MxMR_WLFx_3X 0x00000c00 /* executed 3 times */ +#define MxMR_WLFx_4X 0x00001000 /* executed 4 times */ +#define MxMR_WLFx_5X 0x00001400 /* executed 5 times */ +#define MxMR_WLFx_6X 0x00001800 /* executed 6 times */ +#define MxMR_WLFx_7X 0x00001c00 /* executed 7 times */ +#define MxMR_WLFx_8X 0x00002000 /* executed 8 times */ +#define MxMR_WLFx_9X 0x00002400 /* executed 9 times */ +#define MxMR_WLFx_10X 0x00002800 /* executed 10 times */ +#define MxMR_WLFx_11X 0x00002c00 /* executed 11 times */ +#define MxMR_WLFx_12X 0x00003000 /* executed 12 times */ +#define MxMR_WLFx_13X 0x00003400 /* executed 13 times */ +#define MxMR_WLFx_14X 0x00003800 /* executed 14 times */ +#define MxMR_WLFx_15X 0x00003c00 /* executed 15 times */ +#define MxMR_WLFx_16X 0x00000000 /* executed 16 times */ +#define MxMR_RLFx_MSK 0x0003c000 /* Read Loop Field Mask */ +#define MxMR_GPL_x4DIS 0x00040000 /* GPL_A4 Ouput Line Disable */ +#define MxMR_G0CLx_MSK 0x00380000 /* General Line 0 Control Mask */ +#define MxMR_DSx_1_CYCL 0x00000000 /* 1 cycle Disable Period */ +#define MxMR_DSx_2_CYCL 0x00400000 /* 2 cycle Disable Period */ +#define MxMR_DSx_3_CYCL 0x00800000 /* 3 cycle Disable Period */ +#define MxMR_DSx_4_CYCL 0x00c00000 /* 4 cycle Disable Period */ +#define MxMR_DSx_MSK 0x00c00000 /* Disable Timer Period Mask */ +#define MxMR_AMx_MSK 0x07000000 /* Addess Multiplex Size Mask */ +#define MxMR_OP_NORM 0x00000000 /* Normal Operation */ +#define MxMR_OP_WARR 0x10000000 /* Write to Array */ +#define MxMR_OP_RARR 0x20000000 /* Read from Array */ +#define MxMR_OP_RUNP 0x30000000 /* Run Pattern */ +#define MxMR_OP_MSK 0x30000000 /* Command Opcode Mask */ +#define MxMR_RFEN 0x40000000 /* Refresh Enable */ +#define MxMR_BSEL 0x80000000 /* Bus Select */ + +#define LBLAWAR_EN 0x80000000 +#define LBLAWAR_4KB 0x0000000B +#define LBLAWAR_8KB 0x0000000C +#define LBLAWAR_16KB 0x0000000D +#define LBLAWAR_32KB 0x0000000E +#define LBLAWAR_64KB 0x0000000F +#define LBLAWAR_128KB 0x00000010 +#define LBLAWAR_256KB 0x00000011 +#define LBLAWAR_512KB 0x00000012 +#define LBLAWAR_1MB 0x00000013 +#define LBLAWAR_2MB 0x00000014 +#define LBLAWAR_4MB 0x00000015 +#define LBLAWAR_8MB 0x00000016 +#define LBLAWAR_16MB 0x00000017 +#define LBLAWAR_32MB 0x00000018 +#define LBLAWAR_64MB 0x00000019 +#define LBLAWAR_128MB 0x0000001A +#define LBLAWAR_256MB 0x0000001B +#define LBLAWAR_512MB 0x0000001C +#define LBLAWAR_1GB 0x0000001D +#define LBLAWAR_2GB 0x0000001E + +/* LBCR - Local Bus Configuration Register + */ +#define LBCR_LDIS 0x80000000 +#define LBCR_LDIS_SHIFT 31 +#define LBCR_BCTLC 0x00C00000 +#define LBCR_BCTLC_SHIFT 22 +#define LBCR_LPBSE 0x00020000 +#define LBCR_LPBSE_SHIFT 17 +#define LBCR_EPAR 0x00010000 +#define LBCR_EPAR_SHIFT 16 +#define LBCR_BMT 0x0000FF00 +#define LBCR_BMT_SHIFT 8 + +/* LCRR - Clock Ratio Register + */ +#define LCRR_DBYP 0x80000000 +#define LCRR_DBYP_SHIFT 31 +#define LCRR_BUFCMDC 0x30000000 +#define LCRR_BUFCMDC_SHIFT 28 +#define LCRR_BUFCMDC_1 0x10000000 +#define LCRR_BUFCMDC_2 0x20000000 +#define LCRR_BUFCMDC_3 0x30000000 +#define LCRR_BUFCMDC_4 0x00000000 +#define LCRR_ECL 0x03000000 +#define LCRR_ECL_SHIFT 24 +#define LCRR_ECL_4 0x00000000 +#define LCRR_ECL_5 0x01000000 +#define LCRR_ECL_6 0x02000000 +#define LCRR_ECL_7 0x03000000 +#define LCRR_EADC 0x00030000 +#define LCRR_EADC_SHIFT 16 +#define LCRR_EADC_1 0x00010000 +#define LCRR_EADC_2 0x00020000 +#define LCRR_EADC_3 0x00030000 +#define LCRR_EADC_4 0x00000000 +#define LCRR_CLKDIV 0x0000000F +#define LCRR_CLKDIV_SHIFT 0 +#define LCRR_CLKDIV_2 0x00000002 +#define LCRR_CLKDIV_4 0x00000004 +#define LCRR_CLKDIV_8 0x00000008 + +#endif /* __ASM_PPC_FSL_LBC_H */ diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h index ea702662f8..8cf7b6fb3d 100644 --- a/include/asm-ppc/global_data.h +++ b/include/asm-ppc/global_data.h @@ -96,6 +96,9 @@ typedef struct global_data { uint mp_alloc_base; uint mp_alloc_top; #endif /* CONFIG_QE */ +#if defined(CONFIG_FSL_LAW) + u32 used_laws; +#endif #if defined(CONFIG_MPC5xxx) unsigned long ipb_clk; unsigned long pci_clk; diff --git a/include/asm-ppc/io.h b/include/asm-ppc/io.h index 7cc28bfe3a..c3496818f0 100644 --- a/include/asm-ppc/io.h +++ b/include/asm-ppc/io.h @@ -238,6 +238,42 @@ extern inline void out_be32(volatile unsigned __iomem *addr, int val) __asm__ __volatile__("sync; stw%U0%X0 %1,%0" : "=m" (*addr) : "r" (val)); } +/* Clear and set bits in one shot. These macros can be used to clear and + * set multiple bits in a register using a single call. These macros can + * also be used to set a multiple-bit bit pattern using a mask, by + * specifying the mask in the 'clear' parameter and the new bit pattern + * in the 'set' parameter. + */ + +#define clrbits(type, addr, clear) \ + out_##type((addr), in_##type(addr) & ~(clear)) + +#define setbits(type, addr, set) \ + out_##type((addr), in_##type(addr) | (set)) + +#define clrsetbits(type, addr, clear, set) \ + out_##type((addr), (in_##type(addr) & ~(clear)) | (set)) + +#define clrbits_be32(addr, clear) clrbits(be32, addr, clear) +#define setbits_be32(addr, set) setbits(be32, addr, set) +#define clrsetbits_be32(addr, clear, set) clrsetbits(be32, addr, clear, set) + +#define clrbits_le32(addr, clear) clrbits(le32, addr, clear) +#define setbits_le32(addr, set) setbits(le32, addr, set) +#define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set) + +#define clrbits_be16(addr, clear) clrbits(be16, addr, clear) +#define setbits_be16(addr, set) setbits(be16, addr, set) +#define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set) + +#define clrbits_le16(addr, clear) clrbits(le16, addr, clear) +#define setbits_le16(addr, set) setbits(le16, addr, set) +#define clrsetbits_le16(addr, clear, set) clrsetbits(le16, addr, clear, set) + +#define clrbits_8(addr, clear) clrbits(8, addr, clear) +#define setbits_8(addr, set) setbits(8, addr, set) +#define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set) + /* * Given a physical address and a length, return a virtual address * that can be used to access the memory range with the caching diff --git a/include/asm-ppc/mmu.h b/include/asm-ppc/mmu.h index 4f78ca7a94..050a7b6472 100644 --- a/include/asm-ppc/mmu.h +++ b/include/asm-ppc/mmu.h @@ -140,11 +140,16 @@ extern void _tlbia(void); /* invalidate all TLB entries */ typedef enum { IBAT0 = 0, IBAT1, IBAT2, IBAT3, - DBAT0, DBAT1, DBAT2, DBAT3 + DBAT0, DBAT1, DBAT2, DBAT3, +#ifdef CONFIG_HIGH_BATS + IBAT4, IBAT5, IBAT6, IBAT7, + DBAT4, DBAT5, DBAT6, DBAT7 +#endif } ppc_bat_t; extern int read_bat(ppc_bat_t bat, unsigned long *upper, unsigned long *lower); extern int write_bat(ppc_bat_t bat, unsigned long upper, unsigned long lower); +extern void print_bats(void); #endif /* __ASSEMBLY__ */ diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h index cfd8440237..139e6869df 100644 --- a/include/asm-ppc/processor.h +++ b/include/asm-ppc/processor.h @@ -962,6 +962,17 @@ n: #define SR15 15 #ifndef __ASSEMBLY__ + +struct cpu_type { + char name[15]; + u32 soc_ver; +}; + +struct cpu_type *identify_cpu(uint ver); + +#define CPU_TYPE_ENTRY(n, v) \ + { .name = #n, .soc_ver = SVR_##v, } + #ifndef CONFIG_MACH_SPECIFIC extern int _machine; extern int have_of; diff --git a/include/atmel_lcdc.h b/include/atmel_lcdc.h new file mode 100644 index 0000000000..73dd8f7693 --- /dev/null +++ b/include/atmel_lcdc.h @@ -0,0 +1,177 @@ +/* + * Header file for AT91/AT32 LCD Controller + * + * Data structure and register user interface + * + * Copyright (C) 2007 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ATMEL_LCDC_H__ +#define __ATMEL_LCDC_H__ + +#define ATMEL_LCDC_DMABADDR1 0x00 +#define ATMEL_LCDC_DMABADDR2 0x04 +#define ATMEL_LCDC_DMAFRMPT1 0x08 +#define ATMEL_LCDC_DMAFRMPT2 0x0c +#define ATMEL_LCDC_DMAFRMADD1 0x10 +#define ATMEL_LCDC_DMAFRMADD2 0x14 + +#define ATMEL_LCDC_DMAFRMCFG 0x18 +#define ATMEL_LCDC_FRSIZE (0x7fffff << 0) +#define ATMEL_LCDC_BLENGTH_OFFSET 24 +#define ATMEL_LCDC_BLENGTH (0x7f << ATMEL_LCDC_BLENGTH_OFFSET) + +#define ATMEL_LCDC_DMACON 0x1c +#define ATMEL_LCDC_DMAEN (0x1 << 0) +#define ATMEL_LCDC_DMARST (0x1 << 1) +#define ATMEL_LCDC_DMABUSY (0x1 << 2) +#define ATMEL_LCDC_DMAUPDT (0x1 << 3) +#define ATMEL_LCDC_DMA2DEN (0x1 << 4) + +#define ATMEL_LCDC_DMA2DCFG 0x20 +#define ATMEL_LCDC_ADDRINC_OFFSET 0 +#define ATMEL_LCDC_ADDRINC (0xffff) +#define ATMEL_LCDC_PIXELOFF_OFFSET 24 +#define ATMEL_LCDC_PIXELOFF (0x1f << 24) + +#define ATMEL_LCDC_LCDCON1 0x0800 +#define ATMEL_LCDC_BYPASS (1 << 0) +#define ATMEL_LCDC_CLKVAL_OFFSET 12 +#define ATMEL_LCDC_CLKVAL (0x1ff << ATMEL_LCDC_CLKVAL_OFFSET) +#define ATMEL_LCDC_LINCNT (0x7ff << 21) + +#define ATMEL_LCDC_LCDCON2 0x0804 +#define ATMEL_LCDC_DISTYPE (3 << 0) +#define ATMEL_LCDC_DISTYPE_STNMONO (0 << 0) +#define ATMEL_LCDC_DISTYPE_STNCOLOR (1 << 0) +#define ATMEL_LCDC_DISTYPE_TFT (2 << 0) +#define ATMEL_LCDC_SCANMOD (1 << 2) +#define ATMEL_LCDC_SCANMOD_SINGLE (0 << 2) +#define ATMEL_LCDC_SCANMOD_DUAL (1 << 2) +#define ATMEL_LCDC_IFWIDTH (3 << 3) +#define ATMEL_LCDC_IFWIDTH_4 (0 << 3) +#define ATMEL_LCDC_IFWIDTH_8 (1 << 3) +#define ATMEL_LCDC_IFWIDTH_16 (2 << 3) +#define ATMEL_LCDC_PIXELSIZE (7 << 5) +#define ATMEL_LCDC_PIXELSIZE_1 (0 << 5) +#define ATMEL_LCDC_PIXELSIZE_2 (1 << 5) +#define ATMEL_LCDC_PIXELSIZE_4 (2 << 5) +#define ATMEL_LCDC_PIXELSIZE_8 (3 << 5) +#define ATMEL_LCDC_PIXELSIZE_16 (4 << 5) +#define ATMEL_LCDC_PIXELSIZE_24 (5 << 5) +#define ATMEL_LCDC_PIXELSIZE_32 (6 << 5) +#define ATMEL_LCDC_INVVD (1 << 8) +#define ATMEL_LCDC_INVVD_NORMAL (0 << 8) +#define ATMEL_LCDC_INVVD_INVERTED (1 << 8) +#define ATMEL_LCDC_INVFRAME (1 << 9 ) +#define ATMEL_LCDC_INVFRAME_NORMAL (0 << 9) +#define ATMEL_LCDC_INVFRAME_INVERTED (1 << 9) +#define ATMEL_LCDC_INVLINE (1 << 10) +#define ATMEL_LCDC_INVLINE_NORMAL (0 << 10) +#define ATMEL_LCDC_INVLINE_INVERTED (1 << 10) +#define ATMEL_LCDC_INVCLK (1 << 11) +#define ATMEL_LCDC_INVCLK_NORMAL (0 << 11) +#define ATMEL_LCDC_INVCLK_INVERTED (1 << 11) +#define ATMEL_LCDC_INVDVAL (1 << 12) +#define ATMEL_LCDC_INVDVAL_NORMAL (0 << 12) +#define ATMEL_LCDC_INVDVAL_INVERTED (1 << 12) +#define ATMEL_LCDC_CLKMOD (1 << 15) +#define ATMEL_LCDC_CLKMOD_ACTIVEDISPLAY (0 << 15) +#define ATMEL_LCDC_CLKMOD_ALWAYSACTIVE (1 << 15) +#define ATMEL_LCDC_MEMOR (1 << 31) +#define ATMEL_LCDC_MEMOR_BIG (0 << 31) +#define ATMEL_LCDC_MEMOR_LITTLE (1 << 31) + +#define ATMEL_LCDC_TIM1 0x0808 +#define ATMEL_LCDC_VFP (0xffU << 0) +#define ATMEL_LCDC_VBP_OFFSET 8 +#define ATMEL_LCDC_VBP (0xffU << ATMEL_LCDC_VBP_OFFSET) +#define ATMEL_LCDC_VPW_OFFSET 16 +#define ATMEL_LCDC_VPW (0x3fU << ATMEL_LCDC_VPW_OFFSET) +#define ATMEL_LCDC_VHDLY_OFFSET 24 +#define ATMEL_LCDC_VHDLY (0xfU << ATMEL_LCDC_VHDLY_OFFSET) + +#define ATMEL_LCDC_TIM2 0x080c +#define ATMEL_LCDC_HBP (0xffU << 0) +#define ATMEL_LCDC_HPW_OFFSET 8 +#define ATMEL_LCDC_HPW (0x3fU << ATMEL_LCDC_HPW_OFFSET) +#define ATMEL_LCDC_HFP_OFFSET 21 +#define ATMEL_LCDC_HFP (0x7ffU << ATMEL_LCDC_HFP_OFFSET) + +#define ATMEL_LCDC_LCDFRMCFG 0x0810 +#define ATMEL_LCDC_LINEVAL (0x7ff << 0) +#define ATMEL_LCDC_HOZVAL_OFFSET 21 +#define ATMEL_LCDC_HOZVAL (0x7ff << ATMEL_LCDC_HOZVAL_OFFSET) + +#define ATMEL_LCDC_FIFO 0x0814 +#define ATMEL_LCDC_FIFOTH (0xffff) + +#define ATMEL_LCDC_MVAL 0x0818 + +#define ATMEL_LCDC_DP1_2 0x081c +#define ATMEL_LCDC_DP4_7 0x0820 +#define ATMEL_LCDC_DP3_5 0x0824 +#define ATMEL_LCDC_DP2_3 0x0828 +#define ATMEL_LCDC_DP5_7 0x082c +#define ATMEL_LCDC_DP3_4 0x0830 +#define ATMEL_LCDC_DP4_5 0x0834 +#define ATMEL_LCDC_DP6_7 0x0838 +#define ATMEL_LCDC_DP1_2_VAL (0xff) +#define ATMEL_LCDC_DP4_7_VAL (0xfffffff) +#define ATMEL_LCDC_DP3_5_VAL (0xfffff) +#define ATMEL_LCDC_DP2_3_VAL (0xfff) +#define ATMEL_LCDC_DP5_7_VAL (0xfffffff) +#define ATMEL_LCDC_DP3_4_VAL (0xffff) +#define ATMEL_LCDC_DP4_5_VAL (0xfffff) +#define ATMEL_LCDC_DP6_7_VAL (0xfffffff) + +#define ATMEL_LCDC_PWRCON 0x083c +#define ATMEL_LCDC_PWR (1 << 0) +#define ATMEL_LCDC_GUARDT_OFFSET 1 +#define ATMEL_LCDC_GUARDT (0x7f << ATMEL_LCDC_GUARDT_OFFSET) +#define ATMEL_LCDC_BUSY (1 << 31) + +#define ATMEL_LCDC_CONTRAST_CTR 0x0840 +#define ATMEL_LCDC_PS (3 << 0) +#define ATMEL_LCDC_PS_DIV1 (0 << 0) +#define ATMEL_LCDC_PS_DIV2 (1 << 0) +#define ATMEL_LCDC_PS_DIV4 (2 << 0) +#define ATMEL_LCDC_PS_DIV8 (3 << 0) +#define ATMEL_LCDC_POL (1 << 2) +#define ATMEL_LCDC_POL_NEGATIVE (0 << 2) +#define ATMEL_LCDC_POL_POSITIVE (1 << 2) +#define ATMEL_LCDC_ENA (1 << 3) +#define ATMEL_LCDC_ENA_PWMDISABLE (0 << 3) +#define ATMEL_LCDC_ENA_PWMENABLE (1 << 3) + +#define ATMEL_LCDC_CONTRAST_VAL 0x0844 +#define ATMEL_LCDC_CVAL (0xff) + +#define ATMEL_LCDC_IER 0x0848 +#define ATMEL_LCDC_IDR 0x084c +#define ATMEL_LCDC_IMR 0x0850 +#define ATMEL_LCDC_ISR 0x0854 +#define ATMEL_LCDC_ICR 0x0858 +#define ATMEL_LCDC_LNI (1 << 0) +#define ATMEL_LCDC_LSTLNI (1 << 1) +#define ATMEL_LCDC_EOFI (1 << 2) +#define ATMEL_LCDC_UFLWI (1 << 4) +#define ATMEL_LCDC_OWRI (1 << 5) +#define ATMEL_LCDC_MERI (1 << 6) + +#define ATMEL_LCDC_LUT(n) (0x0c00 + ((n)*4)) + +#endif /* __ATMEL_LCDC_H__ */ diff --git a/include/common.h b/include/common.h index d0f57040ee..26e1b469a1 100644 --- a/include/common.h +++ b/include/common.h @@ -176,6 +176,17 @@ typedef void (interrupt_handler_t)(void *); (__x > __y) ? __x : __y; }) +/** + * container_of - cast a member of a structure out to the containing structure + * @ptr: the pointer to the member. + * @type: the type of the container struct this is embedded in. + * @member: the name of the member within the struct. + * + */ +#define container_of(ptr, type, member) ({ \ + const typeof( ((type *)0)->member ) *__mptr = (ptr); \ + (type *)( (char *)__mptr - offsetof(type,member) );}) + /* * Function Prototypes */ diff --git a/include/configs/Alaska8220.h b/include/configs/Alaska8220.h index 3f2f6140f6..38b962f823 100644 --- a/include/configs/Alaska8220.h +++ b/include/configs/Alaska8220.h @@ -31,6 +31,8 @@ #define CONFIG_MPC8220 1 #define CONFIG_ALASKA8220 1 /* ... on Alaska board */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* Input clock running at 30Mhz, read Hid1 for the CPU multiplier to determine the CPU speed. */ #define CFG_MPC8220_CLKIN 30000000/* ... running at 30MHz */ diff --git a/include/configs/BC3450.h b/include/configs/BC3450.h index 706c13efad..b7574bf149 100644 --- a/include/configs/BC3450.h +++ b/include/configs/BC3450.h @@ -61,6 +61,8 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* * Serial console configuration */ diff --git a/include/configs/CPCI750.h b/include/configs/CPCI750.h index 48e29a2087..89edbde1de 100644 --- a/include/configs/CPCI750.h +++ b/include/configs/CPCI750.h @@ -61,6 +61,8 @@ #undef CONFIG_ECC /* enable ECC support */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* which initialization functions to call for this board */ #define CONFIG_MISC_INIT_R #define CONFIG_BOARD_PRE_INIT diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h index f85cff7abf..3a347eac55 100644 --- a/include/configs/IceCube.h +++ b/include/configs/IceCube.h @@ -37,6 +37,8 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* * Serial console configuration */ diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index 610151f586..d547681c3d 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -469,6 +469,8 @@ #define CFG_HID2 HID2_HBE +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* DDR @ 0x00000000 */ #define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10) #define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index e0a887c7e6..095f6658c1 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h @@ -203,7 +203,7 @@ #define CFG_OR0_PRELIM ( (~(CFG_FLASH_SIZE - 1) << 20) \ | OR_UPM_XAM \ | OR_GPCM_CSNT \ - | OR_GPCM_ACS_0b11 \ + | OR_GPCM_ACS_DIV2 \ | OR_GPCM_XACS \ | OR_GPCM_SCY_15 \ | OR_GPCM_TRLX \ @@ -453,6 +453,7 @@ /* * MMU Setup */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ /* DDR: cache cacheable */ #define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h index 32f57ac7da..977c041dca 100644 --- a/include/configs/MPC8323ERDB.h +++ b/include/configs/MPC8323ERDB.h @@ -468,6 +468,7 @@ /* * MMU Setup */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ /* DDR: cache cacheable */ #define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h index 1276a124c9..9ca2a2be04 100644 --- a/include/configs/MPC832XEMDS.h +++ b/include/configs/MPC832XEMDS.h @@ -483,6 +483,8 @@ * MMU Setup */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* DDR: cache cacheable */ #define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) #define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 119e7ac7c6..37e3ca40b3 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -157,7 +157,7 @@ (2 << BR_PS_SHIFT) | /* 16 bit port size */ \ BR_V) /* valid */ #define CFG_OR0_PRELIM ((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \ - OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \ + OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \ OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD) #define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* window base at flash base */ #define CFG_LBLAWAR0_PRELIM 0x80000018 /* 32 MB window size */ @@ -626,6 +626,7 @@ #define CFG_HID2 HID2_HBE +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ /* DDR @ 0x00000000 */ #define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index c72de03c01..82d06867be 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -211,7 +211,7 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CFG_BR0_PRELIM (CFG_FLASH_BASE | BR_PS_16 | BR_V) #define CFG_OR0_PRELIM ((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \ - OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \ + OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \ OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD) #define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE #define CFG_LBLAWAR0_PRELIM (LBLAWAR_EN | (0x13 + CFG_FLASH_SIZE_SHIFT)) @@ -236,7 +236,7 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CFG_LED_BASE 0xF9000000 #define CFG_BR2_PRELIM (CFG_LED_BASE | BR_PS_8 | BR_V) -#define CFG_OR2_PRELIM (OR_AM_2MB | OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | \ +#define CFG_OR2_PRELIM (OR_AM_2MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \ OR_GPCM_XACS | OR_GPCM_SCY_9 | OR_GPCM_TRLX | \ OR_GPCM_EHTR | OR_GPCM_EAD) @@ -555,6 +555,7 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CFG_HID0_FINAL CFG_HID0_INIT #define CFG_HID2 HID2_HBE +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ /* DDR */ #define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h index 983575eb0c..b4bff9a2be 100644 --- a/include/configs/MPC8360EMDS.h +++ b/include/configs/MPC8360EMDS.h @@ -203,7 +203,7 @@ (2 << BR_PS_SHIFT) | /* 16 bit port size */ \ BR_V) /* valid */ #define CFG_OR0_PRELIM ((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \ - OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \ + OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \ OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD) #define CFG_MAX_FLASH_BANKS 1 /* number of banks */ @@ -515,6 +515,8 @@ * MMU Setup */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* DDR: cache cacheable */ #define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) #define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h index 7b7d6f50c0..ca8d53cf25 100644 --- a/include/configs/MPC8360ERDK.h +++ b/include/configs/MPC8360ERDK.h @@ -195,7 +195,7 @@ (2 << BR_PS_SHIFT) | /* 16 bit port size */ \ BR_V) /* valid */ #define CFG_OR0_PRELIM ((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \ - OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | \ + OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \ OR_GPCM_XACS | OR_GPCM_SCY_15 | \ OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD) @@ -419,6 +419,8 @@ * MMU Setup */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* DDR: cache cacheable */ #define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) #define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index e92493ae4d..0dd02795a6 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -239,7 +239,7 @@ #define CFG_OR0_PRELIM ( (~(CFG_FLASH_SIZE - 1) << 20) \ | OR_UPM_XAM \ | OR_GPCM_CSNT \ - | OR_GPCM_ACS_0b11 \ + | OR_GPCM_ACS_DIV2 \ | OR_GPCM_XACS \ | OR_GPCM_SCY_15 \ | OR_GPCM_TRLX \ @@ -502,6 +502,7 @@ /* * MMU Setup */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ /* DDR: cache cacheable */ #define CFG_SDRAM_LOWER CFG_SDRAM_BASE diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index f7e6fd2c52..29c2490e6b 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -524,6 +524,8 @@ * MMU Setup */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* DDR: cache cacheable */ #define CFG_SDRAM_LOWER CFG_SDRAM_BASE #define CFG_SDRAM_UPPER (CFG_SDRAM_BASE + 0x10000000) diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index 5719759808..d1d3cc3606 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -87,9 +87,6 @@ #define CONFIG_BTB /* toggle branch predition */ #define CONFIG_ADDR_STREAMING /* toggle addr streaming */ -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ - -#undef CFG_DRAM_TEST /* memory test, takes time */ #define CFG_MEMTEST_START 0x00200000 /* memtest region */ #define CFG_MEMTEST_END 0x00400000 diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index 5b3ea05e63..a64565db93 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -73,9 +73,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_BTB /* toggle branch predition */ #define CONFIG_ADDR_STREAMING /* toggle addr streaming */ -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ - -#undef CFG_DRAM_TEST /* memory test, takes time */ #define CFG_MEMTEST_START 0x00200000 /* memtest works on */ #define CFG_MEMTEST_END 0x00400000 diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index ffe9e0089d..669f4d7c8b 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -77,19 +77,14 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_L2_CACHE /* toggle L2 cache */ #define CONFIG_BTB /* toggle branch predition */ #define CONFIG_ADDR_STREAMING /* toggle addr streaming */ -#define CONFIG_CLEAR_LAW0 /* Clear LAW0 in cpu_init_r */ /* * Only possible on E500 Version 2 or newer cores. */ #define CONFIG_ENABLE_36BIT_PHYS 1 -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ - -#undef CFG_DRAM_TEST /* memory test, takes time */ #define CFG_MEMTEST_START 0x00200000 /* memtest works on */ #define CFG_MEMTEST_END 0x00400000 -#define CFG_ALT_MEMTEST #define CONFIG_PANIC_HANG /* do not reset board on panic */ /* @@ -171,6 +166,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #undef CFG_FLASH_CHECKSUM #define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ #define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ +#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ #define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index fc8ad8813f..acf6f0dce6 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -87,9 +87,6 @@ extern unsigned long get_clock_freq(void); */ #define CONFIG_ENABLE_36BIT_PHYS 1 -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ - -#undef CFG_DRAM_TEST /* memory test, takes time */ #define CFG_MEMTEST_START 0x00200000 /* memtest works on */ #define CFG_MEMTEST_END 0x00400000 diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index e8383455c4..1948c0d276 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -73,9 +73,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_BTB /* toggle branch predition */ #define CONFIG_ADDR_STREAMING /* toggle addr streaming */ -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ - -#undef CFG_DRAM_TEST /* memory test, takes time */ #define CFG_MEMTEST_START 0x00200000 /* memtest works on */ #define CFG_MEMTEST_END 0x00400000 diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index 9c95cc6567..edf8525179 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -40,6 +40,7 @@ #define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */ #define CONFIG_CPM2 1 /* has CPM2 */ #define CONFIG_MPC8560ADS 1 /* MPC8560ADS board specific */ +#define CONFIG_MPC8560 1 #define CONFIG_PCI #define CONFIG_TSEC_ENET /* tsec ethernet support */ @@ -80,11 +81,8 @@ #define CONFIG_BTB /* toggle branch predition */ #define CONFIG_ADDR_STREAMING /* toggle addr streaming */ -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ - #define CFG_INIT_DBCR DBCR_IDM /* Enable Debug Exceptions */ -#undef CFG_DRAM_TEST /* memory test, takes time */ #define CFG_MEMTEST_START 0x00200000 /* memtest region */ #define CFG_MEMTEST_END 0x00400000 diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index a7c69d293c..9e6bb44ff9 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -80,7 +80,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ -#undef CFG_DRAM_TEST /* memory test, takes time */ #define CFG_MEMTEST_START 0x00200000 /* memtest works on */ #define CFG_MEMTEST_END 0x00400000 diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index 15ff0eacf2..fc168909e7 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -55,6 +55,7 @@ #define CONFIG_NUM_DDR_CONTROLLERS 1 #define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported & enabled */ #define CONFIG_ALTIVEC 1 /* @@ -71,10 +72,8 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ #define CONFIG_MISC_INIT_R 1 -#undef CFG_DRAM_TEST /* memory test, takes time */ #define CFG_MEMTEST_START 0x00200000 /* memtest region */ #define CFG_MEMTEST_END 0x00400000 -#define CFG_ALT_MEMTEST /* * Base addresses -- Note these are effective addresses where the diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 9acc3da54a..455e154222 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -67,6 +67,7 @@ #define BANK_INTERLEAVING 0x22000000 #define SUPER_BANK_INTERLEAVING 0x23000000 +#define CONFIG_HIGH_BATS 1 /* High BATs supported and enabled */ #define CONFIG_ALTIVEC 1 @@ -86,7 +87,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ -#undef CFG_DRAM_TEST /* memory test, takes time */ #define CFG_MEMTEST_START 0x00200000 /* memtest region */ #define CFG_MEMTEST_END 0x00400000 diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h new file mode 100644 index 0000000000..349ca14bba --- /dev/null +++ b/include/configs/MVBLM7.h @@ -0,0 +1,479 @@ +/* + * Copyright (C) Matrix Vision GmbH 2008 + * + * Matrix Vision mvBlueLYNX-M7 configuration file + * based on Freescale's MPC8349ITX. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define MV_VERSION "v1.0.1" + +/* + * High Level Configuration Options + */ +#define CONFIG_E300 1 +#define CONFIG_MPC83XX 1 +#define CONFIG_MPC834X 1 +#define CONFIG_MPC8343 1 + +#define CFG_IMMR 0xE0000000 + +#define CONFIG_PCI +#define CONFIG_83XX_GENERIC_PCI +#define CONFIG_PCI_SKIP_HOST_BRIDGE +#define CONFIG_HARD_I2C +#define CONFIG_TSEC_ENET +#define CONFIG_MPC8XXX_SPI +#define CONFIG_HARD_SPI +#define MVBLM7_MMC_CS 0x04000000 + +/* I2C */ +#undef CONFIG_SOFT_I2C + +#define CONFIG_FSL_I2C +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_I2C_CMD_TREE +#define CFG_I2C_OFFSET 0x3000 +#define CFG_I2C2_OFFSET 0x3100 + +#define CFG_I2C_SPEED 100000 +#define CFG_I2C_SLAVE 0x7F + +/* + * DDR Setup + */ +#define CFG_DDR_BASE 0x00000000 +#define CFG_SDRAM_BASE CFG_DDR_BASE +#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE +#define CFG_83XX_DDR_USES_CS0 1 +#define CFG_MEMTEST_START (60<<20) +#define CFG_MEMTEST_END (70<<20) + +#define CFG_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \ + DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 + +#define CFG_DDR_SIZE 256 + +/* HC, 75Ohm, DDR-II, DRQ */ +#define CFG_DDRCDR 0x80000001 +/* EN, ODT_WR, 3BA, 14row, 10col */ +#define CFG_DDR_CS0_CONFIG 0x80014102 +#define CFG_DDR_CS1_CONFIG 0x0 +#define CFG_DDR_CS2_CONFIG 0x0 +#define CFG_DDR_CS3_CONFIG 0x0 + +#define CFG_DDR_CS0_BNDS 0x0000000f +#define CFG_DDR_CS1_BNDS 0x0 +#define CFG_DDR_CS2_BNDS 0x0 +#define CFG_DDR_CS3_BNDS 0x0 + +#define CFG_DDR_CLK_CNTL 0x02000000 + +#define CFG_DDR_TIMING_0 0x00260802 +#define CFG_DDR_TIMING_1 0x2625b221 +#define CFG_DDR_TIMING_2 0x1f9820c7 +#define CFG_DDR_TIMING_3 0x00000000 + +/* ~MEM_EN, SREN, DDR-II, 32_BE */ +#define CFG_DDR_SDRAM_CFG 0x43080000 +#define CFG_DDR_SDRAM_CFG2 0x00401000 +#define CFG_DDR_INTERVAL 0x04060100 + +#define CFG_DDR_MODE 0x078e0232 + +/* Flash */ +#define CFG_FLASH_CFI +#define CFG_FLASH_CFI_DRIVER +#define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT + +#define CFG_FLASH_BASE 0xFF800000 +#define CFG_FLASH_SIZE 8 +#define CFG_FLASH_SIZE_SHIFT 3 +#define CFG_FLASH_EMPTY_INFO +#define CFG_FLASH_ERASE_TOUT 60000 +#define CFG_FLASH_WRITE_TOUT 500 +#define CFG_MAX_FLASH_BANKS 1 +#define CFG_MAX_FLASH_SECT 256 + +#define CFG_BR0_PRELIM (CFG_FLASH_BASE | BR_PS_16 | BR_V) +#define CFG_OR0_PRELIM ((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \ + OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS|\ + OR_GPCM_SCY_15 | OR_GPCM_TRLX | OR_GPCM_EHTR | \ + OR_GPCM_EAD) +#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE +#define CFG_LBLAWAR0_PRELIM (LBLAWAR_EN | (0x13 + CFG_FLASH_SIZE_SHIFT)) + +/* + * U-Boot memory configuration + */ +#define CFG_MONITOR_BASE TEXT_BASE +#undef CFG_RAMBOOT + +#define CONFIG_L1_INIT_RAM +#define CFG_INIT_RAM_LOCK +#define CFG_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ +#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM*/ + +#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */ +#define CFG_MONITOR_LEN (512 * 1024) +#define CFG_MALLOC_LEN (512 * 1024) + +/* + * Local Bus LCRR and LBCR regs + * LCRR: DLL bypass, Clock divider is 4 + * External Local Bus rate is + * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV + */ +#define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_4) +#define CFG_LBC_LBCR 0x00000000 + +/* LB sdram refresh timer, about 6us */ +#define CFG_LBC_LSRT 0x32000000 +/* LB refresh timer prescal, 266MHz/32*/ +#define CFG_LBC_MRTPR 0x20000000 + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 1 +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 1 +#define CFG_NS16550_CLK get_bus_freq(0) + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} + +#define CONFIG_CONSOLE ttyS0 +#define CONFIG_BAUDRATE 115200 + +#define CFG_NS16550_COM1 (CFG_IMMR + 0x4500) +#define CFG_NS16550_COM2 (CFG_IMMR + 0x4600) + +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 +#define CONFIG_OF_STDOUT_VIA_ALIAS 1 +#define MV_DTB_NAME "mvblm7.dtb" + +/* + * PCI + */ +#define CFG_PCI1_MEM_BASE 0x80000000 +#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE +#define CFG_PCI1_MEM_SIZE 0x10000000 +#define CFG_PCI1_MMIO_BASE (CFG_PCI1_MEM_BASE + CFG_PCI1_MEM_SIZE) +#define CFG_PCI1_MMIO_PHYS CFG_PCI1_MMIO_BASE +#define CFG_PCI1_MMIO_SIZE 0x10000000 +#define CFG_PCI1_IO_BASE 0x00000000 +#define CFG_PCI1_IO_PHYS 0xE2000000 +#define CFG_PCI1_IO_SIZE 0x01000000 + +#define _IO_BASE 0x00000000 + +#define CONFIG_NET_MULTI 1 +#define CONFIG_NET_RETRY_COUNT 3 + +#define PCI_66M +#define CONFIG_83XX_CLKIN 66666667 +#define CONFIG_PCI_PNP +#define CONFIG_PCI_SCAN_SHOW + +/* TSEC */ +#define CONFIG_GMII +#define CFG_VSC8601_SKEWFIX +#define CFG_VSC8601_SKEW_TX 3 +#define CFG_VSC8601_SKEW_RX 3 + +#define CONFIG_TSEC1 +#define CONFIG_TSEC2 + +#define CONFIG_HAS_ETH0 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_FEC1_PHY_NORXERR +#define CFG_TSEC1_OFFSET 0x24000 +#define CFG_TSEC1 (CFG_IMMR+CFG_TSEC1_OFFSET) +#define TSEC1_PHY_ADDR 0x10 +#define TSEC1_PHYIDX 0 +#define TSEC1_FLAGS (TSEC_GIGABIT|TSEC_REDUCED) + +#define CONFIG_HAS_ETH1 +#define CONFIG_TSEC2_NAME "TSEC1" +#define CONFIG_FEC2_PHY_NORXERR +#define CFG_TSEC2_OFFSET 0x25000 +#define CFG_TSEC2 (CFG_IMMR+CFG_TSEC2_OFFSET) +#define TSEC2_PHY_ADDR 0x11 +#define TSEC2_PHYIDX 0 +#define TSEC2_FLAGS (TSEC_GIGABIT|TSEC_REDUCED) + +#define CONFIG_ETHPRIME "TSEC0" + +#define CONFIG_BOOTP_VENDOREX +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_NTPSERVER +#define CONFIG_BOOTP_RANDOM_DELAY +#define CONFIG_BOOTP_SEND_HOSTNAME + +/* USB */ +#define CONFIG_HAS_FSL_DR_USB + +/* + * Environment + */ +#undef CFG_FLASH_PROTECTION +#define CONFIG_ENV_OVERWRITE + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR 0xFF800000 +#define CFG_ENV_SIZE 0x2000 +#define CFG_ENV_SECT_SIZE 0x2000 +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR+CFG_ENV_SIZE) +#define CFG_ENV_SIZE_REDUND CFG_ENV_SIZE + +#define CONFIG_LOADS_ECHO +#define CFG_LOADS_BAUD_CHANGE + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_NET +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_PCI +#define CONFIG_CMD_I2C +#define CONFIG_CMD_FPGA + +#undef CONFIG_WATCHDOG + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP +#define CONFIG_CMDLINE_EDITING +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " + +/* default load address */ +#define CFG_LOAD_ADDR 0x2000000 +/* default location for tftp and bootm */ +#define CONFIG_LOADADDR 0x200000 + +#define CFG_PROMPT "mvBL-M7> " +#define CFG_CBSIZE 256 + +#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) +#define CFG_MAXARGS 16 +#define CFG_BARGSIZE CFG_CBSIZE +#define CFG_HZ 1000 + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ + +#define CFG_HRCW_LOW 0x0 +#define CFG_HRCW_HIGH 0x0 + +/* + * System performance + */ +#define CFG_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */ +#define CFG_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */ +#define CFG_SPCR_TSEC1EP 3 /* TSEC1 emergency priority (0-3) */ +#define CFG_SPCR_TSEC2EP 3 /* TSEC2 emergency priority (0-3) */ + +/* clocking */ +#define CFG_SCCR_ENCCM 0 +#define CFG_SCCR_USBMPHCM 0 +#define CFG_SCCR_USBDRCM 2 +#define CFG_SCCR_TSEC1CM 1 +#define CFG_SCCR_TSEC2CM 1 + +#define CFG_SICRH 0x1fff8003 +#define CFG_SICRL (SICRL_LDP_A | SICRL_USB1 | SICRL_USB0) + +#define CFG_HID0_INIT 0x000000000 +#define CFG_HID0_FINAL CFG_HID0_INIT + +#define CFG_HID2 HID2_HBE + +/* DDR */ +#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) + +/* PCI */ +#define CFG_IBAT1L (CFG_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT1U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_IBAT2L (CFG_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT |\ + BATL_GUARDEDSTORAGE) +#define CFG_IBAT2U (CFG_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP) + +/* no PCI2 */ +#define CFG_IBAT3L 0 +#define CFG_IBAT3U 0 +#define CFG_IBAT4L 0 +#define CFG_IBAT4U 0 + +/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */ +#define CFG_IBAT5L (CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | \ + BATL_GUARDEDSTORAGE) +#define CFG_IBAT5U (CFG_IMMR | BATU_BL_256M | BATU_VS | BATU_VP) + +/* stack in DCACHE 0xFDF00000 & FLASH @ 0xFF800000 */ +#define CFG_IBAT6L (0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_IBAT7L 0 +#define CFG_IBAT7U 0 + +#define CFG_DBAT0L CFG_IBAT0L +#define CFG_DBAT0U CFG_IBAT0U +#define CFG_DBAT1L CFG_IBAT1L +#define CFG_DBAT1U CFG_IBAT1U +#define CFG_DBAT2L CFG_IBAT2L +#define CFG_DBAT2U CFG_IBAT2U +#define CFG_DBAT3L CFG_IBAT3L +#define CFG_DBAT3U CFG_IBAT3U +#define CFG_DBAT4L CFG_IBAT4L +#define CFG_DBAT4U CFG_IBAT4U +#define CFG_DBAT5L CFG_IBAT5L +#define CFG_DBAT5U CFG_IBAT5U +#define CFG_DBAT6L CFG_IBAT6L +#define CFG_DBAT6U CFG_IBAT6U +#define CFG_DBAT7L CFG_IBAT7L +#define CFG_DBAT7U CFG_IBAT7U + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + + +/* + * Environment Configuration + */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_NETDEV eth0 + +/* Default path and filenames */ +#define CONFIG_BOOTDELAY 5 +#define CONFIG_AUTOBOOT_KEYED +#define CONFIG_AUTOBOOT_STOP_STR "s" +#define CONFIG_ZERO_BOOTDELAY_CHECK +#define CONFIG_RESET_TO_RETRY 1000 + +#define MV_CI "mvBL-M7" +#define MV_VCI "mvBL-M7" +#define MV_FPGA_DATA "0xfff80000" +#define MV_FPGA_SIZE "0x76ca2" +#define MV_KERNEL_ADDR "0xff810000" +#define MV_INITRD_ADDR "0xffc00000" +#define MV_AUTOSCR_ADDR "0xff804000" +#define MV_AUTOSCR_ADDR2 "0xff806000" +#define MV_DTB_ADDR "0xff808000" +#define MV_INITRD_LENGTH "0x00300000" + +#define CONFIG_SHOW_BOOT_PROGRESS 1 + +#define MV_KERNEL_ADDR_RAM "0x00100000" +#define MV_DTB_ADDR_RAM "0x00600000" +#define MV_INITRD_ADDR_RAM "0x01000000" + +#define CONFIG_BOOTCOMMAND "if imi ${autoscr_addr}; \ + then autoscr ${autoscr_addr}; \ + else autoscr ${autoscr_addr2}; \ + fi;" +#define CONFIG_BOOTARGS "root=/dev/ram ro rootfstype=squashfs" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "console_nr=0\0" \ + "stdin=serial\0" \ + "stdout=serial\0" \ + "stderr=serial\0" \ + "fpga=0\0" \ + "fpgadata=" MV_FPGA_DATA "\0" \ + "fpgadatasize=" MV_FPGA_SIZE "\0" \ + "autoscr_addr=" MV_AUTOSCR_ADDR "\0" \ + "autoscr_addr2=" MV_AUTOSCR_ADDR2 "\0" \ + "mv_kernel_addr=" MV_KERNEL_ADDR "\0" \ + "mv_kernel_addr_ram=" MV_KERNEL_ADDR_RAM "\0" \ + "mv_initrd_addr=" MV_INITRD_ADDR "\0" \ + "mv_initrd_addr_ram=" MV_INITRD_ADDR_RAM "\0" \ + "mv_initrd_length=" MV_INITRD_LENGTH "\0" \ + "mv_dtb_addr=" MV_DTB_ADDR "\0" \ + "mv_dtb_addr_ram=" MV_DTB_ADDR_RAM "\0" \ + "dtb_name=" MV_DTB_NAME "\0" \ + "mv_version=" MV_VERSION "\0" \ + "dhcp_client_id=" MV_CI "\0" \ + "dhcp_vendor-class-identifier=" MV_VCI "\0" \ + "netretry=no\0" \ + "use_static_ipaddr=no\0" \ + "static_ipaddr=192.168.90.10\0" \ + "static_netmask=255.255.255.0\0" \ + "static_gateway=0.0.0.0\0" \ + "initrd_name=uInitrd.mvblm7-xenorfs\0" \ + "zcip=no\0" \ + "netboot=yes\0" \ + "mvtest=Ff\0" \ + "tried_bootfromflash=no\0" \ + "tried_bootfromnet=no\0" \ + "bootfile=mvblm72625.boot\0" \ + "use_dhcp=yes\0" \ + "gev_start=yes\0" \ + "mvbcdma_debug=0\0" \ + "mvbcia_debug=0\0" \ + "propdev_debug=0\0" \ + "gevss_debug=0\0" \ + "watchdog=0\0" \ + "usb_dr_mode=host\0" \ + "" + +#define CONFIG_FPGA_COUNT 1 +#define CONFIG_FPGA CFG_ALTERA_CYCLON2 +#define CONFIG_FPGA_ALTERA +#define CONFIG_FPGA_CYCLON2 + +#endif diff --git a/include/configs/PM520.h b/include/configs/PM520.h index 6eb6444925..259178f857 100644 --- a/include/configs/PM520.h +++ b/include/configs/PM520.h @@ -40,6 +40,8 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* * Serial console configuration */ diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h index ff64378f20..8a53fdd0cb 100644 --- a/include/configs/SBC8540.h +++ b/include/configs/SBC8540.h @@ -49,6 +49,7 @@ #define CONFIG_CPM2 1 /* has CPM2 */ #define CONFIG_SBC8540 1 /* configuration for SBC8560 board */ +#define CONFIG_MPC8540 1 #define CONFIG_MPC8560ADS 1 /* MPC8560ADS board specific (supplement) */ diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h index 6cb3022b93..d21783b838 100644 --- a/include/configs/TB5200.h +++ b/include/configs/TB5200.h @@ -42,6 +42,8 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* * Serial console configuration */ diff --git a/include/configs/TOP5200.h b/include/configs/TOP5200.h index 71fa36baae..4c447356a4 100644 --- a/include/configs/TOP5200.h +++ b/include/configs/TOP5200.h @@ -50,6 +50,8 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* * Serial console configuration */ diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index bff2edf769..bfb478a868 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -47,6 +47,8 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* * Serial console configuration */ diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index a86939e097..0d2ca7225b 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -113,7 +113,7 @@ extern int tqm834x_num_flash_banks; BR_MS_GPCM | BR_PS_32 | BR_V) /* FLASH timing (0x0000_0c54) */ -#define CFG_OR_TIMING_FLASH (OR_GPCM_CSNT | OR_GPCM_ACS_0b10 | \ +#define CFG_OR_TIMING_FLASH (OR_GPCM_CSNT | OR_GPCM_ACS_DIV4 | \ OR_GPCM_SCY_5 | OR_GPCM_TRLX) #define CFG_PRELIM_OR_AM 0xc0000000 /* OR addr mask: 1 GiB */ @@ -423,6 +423,8 @@ extern int tqm834x_num_flash_banks; #define CFG_HID0_FINAL CFG_HID0_INIT #define CFG_HID2 HID2_HBE +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* DDR 0 - 512M */ #define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) #define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h index fca5f74df7..d18f2346c6 100644 --- a/include/configs/TQM85xx.h +++ b/include/configs/TQM85xx.h @@ -1,4 +1,7 @@ /* + * (C) Copyright 2007 + * Thomas Waehner, TQ-System GmbH, thomas.waehner@tqs.de. + * * (C) Copyright 2005 * Stefan Roese, DENX Software Engineering, sr@denx.de. * @@ -27,7 +30,7 @@ */ /* - * TQM85xx (8560/40/55/41) board configuration file + * TQM85xx (8560/40/55/41/48) board configuration file */ #ifndef __CONFIG_H @@ -39,25 +42,53 @@ #define CONFIG_MPC85xx 1 /* MPC8540/60/55/41 */ #define CONFIG_PCI +#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ +#define CONFIG_PCIX_CHECK /* PCIX olny works at 66 MHz */ +#ifdef CONFIG_TQM8548 +#define CONFIG_PCI1 +#define CONFIG_PCIE1 +#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ +#endif + #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ + /* + * Configuration for big NOR Flashes + * + * Define CONFIG_TQM_BIGFLASH for boards with more than 128 MiB NOR Flash. + * Please be aware, that this changes the whole memory map (new CCSRBAR + * address, etc). You have to use an adapted Linux kernel or FDT blob + * if this option is set. + */ +#undef CONFIG_TQM_BIGFLASH + +/* + * NAND flash support (disabled by default) + * + * Warning: NAND support will likely increase the U-Boot image size + * to more than 256 KB. Please adjust TEXT_BASE if necessary. + */ +#undef CONFIG_NAND + /* - * Only MPC8540 doesn't have CPM module + * MPC8540 and MPC8548 don't have CPM module */ -#ifndef CONFIG_MPC8540 +#if !defined(CONFIG_MPC8540) && !defined(CONFIG_MPC8548) #define CONFIG_CPM2 1 /* has CPM2 */ #endif -#define CONFIG_FSL_LAW 1 /* Use common FSL init code */ +#define CONFIG_FSL_LAW 1 /* Use common FSL init code */ + +#undef CONFIG_CAN_DRIVER /* CAN Driver support */ /* * sysclk for MPC85xx * * Two valid values are: - * 33000000 - * 66000000 + * 33333333 + * 66666666 * * Most PCI cards are still 33Mhz, so in the presence of PCI, 33MHz * is likely the desired value here, so that is now the default. @@ -88,10 +119,18 @@ * actual resources get mapped (not physical addresses) */ #define CFG_CCSRBAR_DEFAULT 0xFF700000 /* CCSRBAR Default */ +#ifdef CONFIG_TQM_BIGFLASH +#define CFG_CCSRBAR 0xA0000000 /* relocated CCSRBAR */ +#else /* !CONFIG_TQM_BIGFLASH */ #define CFG_CCSRBAR 0xE0000000 /* relocated CCSRBAR */ +#endif /* CONFIG_TQM_BIGFLASH */ #define CFG_CCSRBAR_PHYS CFG_CCSRBAR /* physical addr of CCSRBAR */ #define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */ +#define CFG_PCI1_ADDR (CFG_CCSRBAR + 0x8000) +#define CFG_PCI2_ADDR (CFG_CCSRBAR + 0x9000) +#define CFG_PCIE1_ADDR (CFG_CCSRBAR + 0xa000) + /* * DDR Setup */ @@ -102,65 +141,116 @@ /* TQM8540 & 8560 need DLL-override */ #define CONFIG_DDR_DLL /* DLL fix needed */ #define CONFIG_DDR_DEFAULT_CL 25 /* CAS latency 2,5 */ -#endif /* defined(CONFIG_TQM8540) || defined(CONFIG_TQM8560) */ +#endif /* CONFIG_TQM8540 || CONFIG_TQM8560 */ -#if defined(CONFIG_TQM8541) || defined(CONFIG_TQM8555) +#if defined(CONFIG_TQM8541) || defined(CONFIG_TQM8555) || \ + defined(CONFIG_TQM8548) #define CONFIG_DDR_DEFAULT_CL 30 /* CAS latency 3 */ -#endif /* defined(CONFIG_TQM8541) || defined(CONFIG_TQM8555) */ +#endif /* CONFIG_TQM8541 || CONFIG_TQM8555 || CONFIG_TQM8548 */ + +/* + * Old TQM85xx boards have 'M' type Spansion Flashes from the S29GLxxxM + * series while new boards have 'N' type Flashes from the S29GLxxxN + * series, which have bigger sectors: 2 x 128 instead of 2 x 64 KB. + */ +#ifdef CONFIG_TQM8548 +#define CONFIG_TQM_FLASH_N_TYPE +#endif /* CONFIG_TQM8548 */ /* * Flash on the Local Bus */ +#ifdef CONFIG_TQM_BIGFLASH +#define CFG_FLASH0 0xE0000000 +#define CFG_FLASH1 0xC0000000 +#else /* !CONFIG_TQM_BIGFLASH */ #define CFG_FLASH0 0xFC000000 #define CFG_FLASH1 0xF8000000 +#endif /* CONFIG_TQM_BIGFLASH */ #define CFG_FLASH_BANKS_LIST { CFG_FLASH1, CFG_FLASH0 } #define CFG_LBC_FLASH_BASE CFG_FLASH1 /* Localbus flash start */ -#define CFG_FLASH_BASE CFG_LBC_FLASH_BASE /* start of FLASH */ +#define CFG_FLASH_BASE CFG_LBC_FLASH_BASE /* start of FLASH */ +/* Default ORx timings are for <= 41.7 MHz Local Bus Clock. + * + * Note: According to timing specifications external addr latch delay + * (EAD, bit #0) must be set if Local Bus Clock is > 83 MHz. + * + * For other Local Bus Clocks see following table: + * + * Clock/MHz CFG_ORx_PRELIM + * 166 0x.....CA5 + * 133 0x.....C85 + * 100 0x.....C65 + * 83 0x.....FA2 + * 66 0x.....C82 + * 50 0x.....C60 + * 42 0x.....040 + * 33 0x.....030 + * 25 0x.....020 + * + */ +#ifdef CONFIG_TQM_BIGFLASH +#define CFG_BR0_PRELIM 0xE0001801 /* port size 32bit */ +#define CFG_OR0_PRELIM 0xE0000040 /* 512MB Flash */ +#define CFG_BR1_PRELIM 0xC0001801 /* port size 32bit */ +#define CFG_OR1_PRELIM 0xE0000040 /* 512MB Flash */ +#else /* !CONFIG_TQM_BIGFLASH */ #define CFG_BR0_PRELIM 0xfc001801 /* port size 32bit */ #define CFG_OR0_PRELIM 0xfc000040 /* 64MB Flash */ #define CFG_BR1_PRELIM 0xf8001801 /* port size 32bit */ #define CFG_OR1_PRELIM 0xfc000040 /* 64MB Flash */ +#endif /* CONFIG_TQM_BIGFLASH */ -#define CFG_FLASH_CFI /* flash is CFI compat. */ -#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver*/ +#define CFG_FLASH_CFI /* flash is CFI compat. */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ #define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector */ #define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash*/ +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* speed up output to Flash */ -#define CFG_MAX_FLASH_BANKS 2 /* number of banks */ -#define CFG_MAX_FLASH_SECT 512 /* sectors per device */ +#define CFG_MAX_FLASH_BANKS 2 /* number of banks */ +#define CFG_MAX_FLASH_SECT 512 /* sectors per device */ #undef CFG_FLASH_CHECKSUM #define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ #define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ #define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ -#define CFG_LBC_LCRR 0x00030008 /* LB clock ratio reg */ -#define CFG_LBC_LBCR 0x00000000 /* LB config reg */ -#define CFG_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ -#define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer presc.*/ +/* + * Note: when changing the Local Bus clock divider you have to + * change the timing values in CFG_ORx_PRELIM. + * + * LCRR[00:03] CLKDIV: System (CCB) clock divider. Valid values are 2, 4, 8. + * LCRR[16:17] EADC : External address delay cycles. It should be set to 2 + * for Local Bus Clock > 83.3 MHz. + */ +#define CFG_LBC_LCRR 0x00030008 /* LB clock ratio reg */ +#define CFG_LBC_LBCR 0x00000000 /* LB config reg */ +#define CFG_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ +#define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer presc.*/ #define CONFIG_L1_INIT_RAM #define CFG_INIT_RAM_LOCK 1 -#define CFG_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ +#define CFG_INIT_RAM_ADDR (CFG_CCSRBAR \ + + 0x04010000) /* Initial RAM address */ #define CFG_INIT_RAM_END 0x4000 /* End used area in RAM */ -#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data*/ +#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET -#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256kB for Mon*/ -#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ +#define CFG_MONITOR_LEN (~TEXT_BASE + 1)/* Reserved for Monitor */ +#define CFG_MALLOC_LEN (384 * 1024) /* Reserved for malloc */ /* Serial Port */ #if defined(CONFIG_TQM8560) -#define CONFIG_CONS_ON_SCC /* define if console on SCC */ -#undef CONFIG_CONS_NONE /* define if console on something else */ -#define CONFIG_CONS_INDEX 1 /* which serial channel for console */ +#define CONFIG_CONS_ON_SCC /* define if console on SCC */ +#undef CONFIG_CONS_NONE /* define if console on something else */ +#define CONFIG_CONS_INDEX 1 /* which serial channel for console */ -#else /* ! TQM8560 */ +#else /* !CONFIG_TQM8560 */ #define CONFIG_CONS_INDEX 1 #undef CONFIG_SERIAL_SOFTWARE_FIFO @@ -173,20 +263,18 @@ #define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600) /* PS/2 Keyboard */ -#if !defined(CONFIG_TQM8560) #define CONFIG_PS2KBD /* AT-PS/2 Keyboard */ #define CONFIG_PS2MULT /* .. on PS/2 Multiplexer */ #define CONFIG_PS2SERIAL 2 /* .. on DUART2 */ #define CONFIG_PS2MULT_DELAY (CFG_HZ/2) /* Initial delay */ #define CONFIG_BOARD_EARLY_INIT_R 1 -#endif /* !CONFIG_TQM8560 */ #endif /* CONFIG_TQM8560 */ -#define CONFIG_BAUDRATE 115200 +#define CONFIG_BAUDRATE 115200 -#define CFG_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CFG_HUSH_PARSER 1 /* Use the HUSH parser */ @@ -194,11 +282,25 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 +#define CONFIG_OF_STDOUT_VIA_ALIAS 1 + +/* CAN */ +#define CFG_CAN_BASE (CFG_CCSRBAR \ + + 0x03000000) /* CAN base address */ +#ifdef CONFIG_CAN_DRIVER +#define CFG_CAN_OR_AM 0xFFFF8000 /* 32 KiB address mask */ +#define CFG_OR2_CAN (CFG_CAN_OR_AM | OR_UPM_BI) +#define CFG_BR2_CAN ((CFG_CAN_BASE & BR_BA) | \ + BR_PS_8 | BR_MS_UPMC | BR_V) +#endif /* CONFIG_CAN_DRIVER */ /* * I2C */ -#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ +#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ #define CONFIG_HARD_I2C /* I2C with hardware support */ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ @@ -219,7 +321,7 @@ #define CFG_EEPROM_PAGE_WRITE_BITS 5 /* =32 Bytes per write */ #define CFG_EEPROM_PAGE_WRITE_ENABLE #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20 -#define CFG_I2C_MULTI_EEPROMS 1 /* more than one eeprom */ +#define CFG_I2C_MULTI_EEPROMS 1 /* more than one eeprom */ /* I2C SYSMON (LM75) */ #define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ @@ -228,10 +330,64 @@ #define CFG_DTT_LOW_TEMP -30 #define CFG_DTT_HYSTERESIS 3 +#ifndef CONFIG_PCIE1 /* RapidIO MMU */ +#ifdef CONFIG_TQM_BIGFLASH +#define CFG_RIO_MEM_BASE 0xb0000000 /* base address */ +#define CFG_RIO_MEM_SIZE 0x10000000 /* 256M */ +#else /* !CONFIG_TQM_BIGFLASH */ #define CFG_RIO_MEM_BASE 0xc0000000 /* base address */ +#define CFG_RIO_MEM_SIZE 0x20000000 /* 512M */ +#endif /* CONFIG_TQM_BIGFLASH */ #define CFG_RIO_MEM_PHYS CFG_RIO_MEM_BASE -#define CFG_RIO_MEM_SIZE 0x20000000 /* 128M */ +#endif /* CONFIG_PCIE1 */ + +/* NAND FLASH */ +#ifdef CONFIG_NAND + +#undef CFG_NAND_LEGACY + +#define CONFIG_NAND_FSL_UPM 1 + +#define CONFIG_MTD_NAND_ECC_JFFS2 1 /* use JFFS2 ECC */ + +/* address distance between chip selects */ +#define CFG_NAND_SELECT_DEVICE 1 +#define CFG_NAND_CS_DIST 0x200 + +#define CFG_NAND_SIZE 0x8000 +#define CFG_NAND0_BASE (CFG_CCSRBAR + 0x03010000) +#define CFG_NAND1_BASE (CFG_NAND0_BASE + CFG_NAND_CS_DIST) +#define CFG_NAND2_BASE (CFG_NAND1_BASE + CFG_NAND_CS_DIST) +#define CFG_NAND3_BASE (CFG_NAND2_BASE + CFG_NAND_CS_DIST) + +#define CFG_MAX_NAND_DEVICE 2 /* Max number of NAND devices */ +#define NAND_MAX_CHIPS 1 + +#if (CFG_MAX_NAND_DEVICE == 1) +#define CFG_NAND_BASE_LIST { CFG_NAND0_BASE } +#elif (CFG_MAX_NAND_DEVICE == 2) +#define CFG_NAND_QUIET_TEST 1 +#define CFG_NAND_BASE_LIST { CFG_NAND0_BASE, \ + CFG_NAND1_BASE, \ +} +#elif (CFG_MAX_NAND_DEVICE == 4) +#define CFG_NAND_QUIET_TEST 1 +#define CFG_NAND_BASE_LIST { CFG_NAND0_BASE, \ + CFG_NAND1_BASE, \ + CFG_NAND2_BASE, \ + CFG_NAND3_BASE, \ +} +#endif + +/* CS3 for NAND Flash */ +#define CFG_BR3_PRELIM ((CFG_NAND0_BASE & BR_BA) | BR_PS_8 | \ + BR_MS_UPMB | BR_V) +#define CFG_OR3_PRELIM (P2SZ_TO_AM(CFG_NAND_SIZE) | OR_UPM_BI) + +#define NAND_BIG_DELAY_US 25 /* max tR for Samsung devices */ + +#endif /* CONFIG_NAND */ /* * General PCI @@ -240,9 +396,33 @@ #define CFG_PCI1_MEM_BASE 0x80000000 #define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE #define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */ -#define CFG_PCI1_IO_BASE 0xe2000000 +#define CFG_PCI1_IO_BASE (CFG_CCSRBAR + 0x02000000) #define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE -#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */ +#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */ + +/* PCI view of System Memory */ +#define CFG_PCI_MEMORY_BUS 0x00000000 +#define CFG_PCI_MEMORY_PHYS 0x00000000 +#define CFG_PCI_MEMORY_SIZE 0x80000000 + +#ifdef CONFIG_PCIE1 +/* + * General PCI express + * Addresses are mapped 1-1. + */ +#ifdef CONFIG_TQM_BIGFLASH +#define CFG_PCIE1_MEM_BASE 0xb0000000 +#define CFG_PCIE1_MEM_SIZE 0x10000000 /* 512M */ +#define CFG_PCIE1_IO_BASE 0xaf000000 +#else /* !CONFIG_TQM_BIGFLASH */ +#define CFG_PCIE1_MEM_BASE 0xc0000000 +#define CFG_PCIE1_MEM_SIZE 0x20000000 /* 512M */ +#define CFG_PCIE1_IO_BASE 0xef000000 +#endif /* CONFIG_TQM_BIGFLASH */ +#define CFG_PCIE1_MEM_PHYS CFG_PCIE1_MEM_BASE +#define CFG_PCIE1_IO_PHYS CFG_PCIE1_IO_BASE +#define CFG_PCIE1_IO_SIZE 0x1000000 /* 16M */ +#endif /* CONFIG_PCIE1 */ #if defined(CONFIG_PCI) @@ -254,8 +434,7 @@ #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ -#endif /* CONFIG_PCI */ - +#endif /* CONFIG_PCI */ #define CONFIG_NET_MULTI 1 @@ -277,6 +456,27 @@ #define CONFIG_HAS_ETH1 #define CONFIG_HAS_ETH2 +#ifdef CONFIG_TQM8548 +/* + * TQM8548 has 4 ethernet ports. 4 ETSEC's. + * + * On the STK85xx Starterkit the ETSEC3/4 ports are on an + * additional adapter (AIO) between module and Starterkit. + */ +#define CONFIG_TSEC3 1 +#define CONFIG_TSEC3_NAME "TSEC2" +#define CONFIG_TSEC4 1 +#define CONFIG_TSEC4_NAME "TSEC3" +#define TSEC3_PHY_ADDR 4 +#define TSEC4_PHY_ADDR 5 +#define TSEC3_PHYIDX 0 +#define TSEC4_PHYIDX 0 +#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC4_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define CONFIG_HAS_ETH3 +#define CONFIG_HAS_ETH4 +#endif /* CONFIG_TQM8548 */ + /* Options are TSEC[0-1], FEC */ #define CONFIG_ETHPRIME "TSEC0" @@ -305,7 +505,7 @@ * FCC2: a - c (X50.2 - 1) */ #define CONFIG_ETHER_ON_FCC -#define CONFIG_ETHER_INDEX 1 /* FCC channel for ethernet */ +#define CONFIG_ETHER_INDEX 1 /* FCC channel for ethernet */ #endif #if defined(CONFIG_TQM8560) @@ -321,12 +521,13 @@ * FCC3: a - d (X50.2 - 3) */ #define CONFIG_ETHER_ON_FCC -#define CONFIG_ETHER_INDEX 3 /* FCC channel for ethernet */ +#define CONFIG_ETHER_INDEX 3 /* FCC channel for ethernet */ #endif #if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 1) #define CONFIG_ETHER_ON_FCC1 -#define CFG_CMXFCR_MASK1 (CMXFCR_FC1 | CMXFCR_RF1CS_MSK | CMXFCR_TF1CS_MSK) +#define CFG_CMXFCR_MASK1 (CMXFCR_FC1 | CMXFCR_RF1CS_MSK | \ + CMXFCR_TF1CS_MSK) #define CFG_CMXFCR_VALUE1 (CMXFCR_RF1CS_CLK11 | CMXFCR_TF1CS_CLK12) #define CFG_CPMFCR_RAMTYPE 0 #define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) @@ -334,7 +535,8 @@ #if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 2) #define CONFIG_ETHER_ON_FCC2 -#define CFG_CMXFCR_MASK2 (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK) +#define CFG_CMXFCR_MASK2 (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | \ + CMXFCR_TF2CS_MSK) #define CFG_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK16 | CMXFCR_TF2CS_CLK13) #define CFG_CPMFCR_RAMTYPE 0 #define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) @@ -342,7 +544,8 @@ #if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 3) #define CONFIG_ETHER_ON_FCC3 -#define CFG_CMXFCR_MASK3 (CMXFCR_FC3 | CMXFCR_RF3CS_MSK | CMXFCR_TF3CS_MSK) +#define CFG_CMXFCR_MASK3 (CMXFCR_FC3 | CMXFCR_RF3CS_MSK | \ + CMXFCR_TF3CS_MSK) #define CFG_CMXFCR_VALUE3 (CMXFCR_RF3CS_CLK15 | CMXFCR_TF3CS_CLK14) #define CFG_CPMFCR_RAMTYPE 0 #define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) @@ -352,17 +555,21 @@ * Environment */ #define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x20000) -#define CFG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ + +#ifdef CONFIG_TQM_FLASH_N_TYPE +#define CFG_ENV_SECT_SIZE 0x40000 /* 256K (one sector) for env */ +#else /* !CONFIG_TQM_FLASH_N_TYPE */ +#define CFG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) for env */ +#endif /* CONFIG_TQM_FLASH_N_TYPE */ +#define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE 0x2000 -#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR - CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ -#define CONFIG_TIMESTAMP /* Print image info with ts */ - +#define CONFIG_TIMESTAMP /* Print image info with ts */ /* * BOOTP options @@ -372,6 +579,25 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME +#ifdef CONFIG_NAND +/* + * Use NAND-FLash as JFFS2 device + */ +#define CONFIG_CMD_NAND +#define CONFIG_CMD_JFFS2 + +#define CONFIG_JFFS2_NAND 1 + +#ifdef CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nand0=TQM85xx-nand" +#define MTDPARTS_DEFAULT "mtdparts=TQM85xx-nand:-" +#else +#define CONFIG_JFFS2_DEV "nand0" /* NAND device jffs2 lives on */ +#define CONFIG_JFFS2_PART_OFFSET 0 /* start of jffs2 partition */ +#define CONFIG_JFFS2_PART_SIZE 0x200000 /* size of jffs2 partition */ +#endif /* CONFIG_JFFS2_CMDLINE */ + +#endif /* CONFIG_NAND */ /* * Command line configuration. @@ -389,10 +615,9 @@ #define CONFIG_CMD_MII #if defined(CONFIG_PCI) - #define CONFIG_CMD_PCI +#define CONFIG_CMD_PCI #endif - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* @@ -403,12 +628,13 @@ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) - #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else - #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buf Size */ +#define CFG_PBSIZE (CFG_CBSIZE + \ + sizeof(CFG_PROMPT) + 16) /* Print Buf Size */ #define CFG_MAXARGS 16 /* max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ #define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ @@ -433,7 +659,6 @@ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif - #define CONFIG_LOADADDR 200000 /* default addr for tftp & bootm*/ #define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */ @@ -444,10 +669,26 @@ #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ + +/* + * Setup some board specific values for the default environment variables + */ +#ifdef CONFIG_CPM2 +#define CFG_ENV_CONSDEV "consdev=ttyCPM0\0" +#else +#define CFG_ENV_CONSDEV "consdev=ttyS0\0" +#endif +#define CFG_ENV_FDT_FILE "fdt_file="MK_STR(CONFIG_HOSTNAME)"/" \ + MK_STR(CONFIG_HOSTNAME)".dtb\0" +#define CFG_ENV_BOOTFILE "bootfile="MK_STR(CONFIG_HOSTNAME)"/uImage\0" +#define CFG_ENV_UBOOT "uboot="MK_STR(CONFIG_HOSTNAME)"/u-boot.bin\0" \ + "uboot_addr="MK_STR(TEXT_BASE)"\0" + #define CONFIG_EXTRA_ENV_SETTINGS \ - "bootfile="CFG_BOOTFILE_PATH"\0" \ + CFG_ENV_BOOTFILE \ + CFG_ENV_FDT_FILE \ + CFG_ENV_CONSDEV \ "netdev=eth0\0" \ - "consdev=ttyS0\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ "nfsroot=$serverip:$rootpath\0" \ "ramargs=setenv bootargs root=/dev/ram rw\0" \ @@ -457,20 +698,27 @@ "addcons=setenv bootargs $bootargs " \ "console=$consdev,$baudrate\0" \ "flash_nfs=run nfsargs addip addcons;" \ - "bootm $kernel_addr\0" \ + "bootm $kernel_addr - $fdt_addr\0" \ "flash_self=run ramargs addip addcons;" \ - "bootm $kernel_addr $ramdisk_addr\0" \ - "net_nfs=tftp $loadaddr $bootfile;" \ - "run nfsargs addip addcons;bootm\0" \ + "bootm $kernel_addr $ramdisk_addr $fdt_addr\0" \ + "net_nfs=tftp $kernel_addr_r $bootfile;" \ + "tftp $fdt_addr_r $fdt_file;" \ + "run nfsargs addip addcons;" \ + "bootm $kernel_addr_r - $fdt_addr_r\0" \ "rootpath=/opt/eldk/ppc_85xx\0" \ - "kernel_addr=FE000000\0" \ - "ramdisk_addr=FE180000\0" \ - "load=tftp 100000 /tftpboot/$hostname/u-boot.bin\0" \ - "update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \ - "cp.b 100000 fffc0000 40000;" \ + "fdt_addr_r=900000\0" \ + "kernel_addr_r=1000000\0" \ + "fdt_addr=ffec0000\0" \ + "kernel_addr=ffd00000\0" \ + "ramdisk_addr=ff800000\0" \ + CFG_ENV_UBOOT \ + "load=tftp 100000 $uboot\0" \ + "update=protect off $uboot_addr +$filesize;" \ + "erase $uboot_addr +$filesize;" \ + "cp.b 100000 $uboot_addr $filesize;" \ "setenv filesize;saveenv\0" \ "upd=run load update\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" -#endif /* __CONFIG_H */ +#endif /* __CONFIG_H */ diff --git a/include/configs/Total5200.h b/include/configs/Total5200.h index 31f10dd87c..598fe7bf27 100644 --- a/include/configs/Total5200.h +++ b/include/configs/Total5200.h @@ -48,6 +48,8 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* * Serial console configuration */ diff --git a/include/configs/Yukon8220.h b/include/configs/Yukon8220.h index 00c4ff093a..1b4195a08f 100644 --- a/include/configs/Yukon8220.h +++ b/include/configs/Yukon8220.h @@ -31,6 +31,8 @@ #define CONFIG_MPC8220 1 #define CONFIG_YUKON8220 1 /* ... on Yukon board */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* Input clock running at 30Mhz, read Hid1 for the CPU multiplier to determine the CPU speed. */ #define CFG_MPC8220_CLKIN 30000000/* ... running at 30MHz */ diff --git a/include/configs/ads5121.h b/include/configs/ads5121.h index c975a249c7..4226529eb7 100644 --- a/include/configs/ads5121.h +++ b/include/configs/ads5121.h @@ -372,6 +372,8 @@ #define CFG_HID0_FINAL HID0_ENABLE_MACHINE_CHECK #define CFG_HID2 HID2_HBE +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* * Internal Definitions * diff --git a/include/configs/aev.h b/include/configs/aev.h index e3f810c5c8..c5e475921c 100644 --- a/include/configs/aev.h +++ b/include/configs/aev.h @@ -41,6 +41,8 @@ #define CONFIG_AEVFIFO 1 #define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ diff --git a/include/configs/at91cap9adk.h b/include/configs/at91cap9adk.h index c891fa80ed..342ce2a649 100644 --- a/include/configs/at91cap9adk.h +++ b/include/configs/at91cap9adk.h @@ -28,6 +28,7 @@ #define __CONFIG_H /* ARM asynchronous clock */ +#define AT91_CPU_NAME "AT91CAP9" #define AT91_MAIN_CLOCK 200000000 /* from 12 MHz crystal */ #define AT91_MASTER_CLOCK 100000000 /* peripheral = main / 2 */ #define CFG_HZ 1000000 /* 1us resolution */ @@ -55,11 +56,19 @@ #undef CONFIG_USART2 #define CONFIG_USART3 1 /* USART 3 is DBGU */ -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ - "root=/dev/mtdblock1 rw rootfstype=jffs2" +/* LCD */ +#define CONFIG_LCD 1 +#define LCD_BPP LCD_COLOR8 +#define CONFIG_LCD_LOGO 1 +#undef LCD_TEST_PATTERN +#define CONFIG_LCD_INFO 1 +#define CONFIG_LCD_INFO_BELOW_LOGO 1 +#define CFG_WHITE_ON_BLACK 1 +#define CONFIG_ATMEL_LCD 1 +#define CONFIG_ATMEL_LCD_BGR555 1 +#define CFG_CONSOLE_IS_IN_ENV 1 -/* #define CONFIG_ENV_OVERWRITE 1 */ +#define CONFIG_BOOTDELAY 3 /* * BOOTP options @@ -94,9 +103,9 @@ #define CFG_SPI_WRITE_TOUT (5*CFG_HZ) #define CFG_MAX_DATAFLASH_BANKS 1 #define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ -#define AT91_SPI_CLK 20000000 -#define DATAFLASH_TCSS (0xFA << 16) -#define DATAFLASH_TCHS (0x8 << 24) +#define AT91_SPI_CLK 15000000 +#define DATAFLASH_TCSS (0x1a << 16) +#define DATAFLASH_TCHS (0x1 << 24) /* NOR flash */ #define CFG_FLASH_CFI 1 @@ -110,6 +119,7 @@ #define NAND_MAX_CHIPS 1 #define CFG_MAX_NAND_DEVICE 1 #define CFG_NAND_BASE 0x40000000 +#define CFG_NAND_DBW_8 1 /* Ethernet */ #define CONFIG_MACB 1 @@ -143,7 +153,12 @@ #define CFG_ENV_OFFSET 0x4200 #define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET) #define CFG_ENV_SIZE 0x4200 -#define CONFIG_BOOTCOMMAND "cp.b 0xC003DE00 0x72000000 0x200040; bootm" +#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x72000000 0x210000; bootm" +#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ + "root=/dev/mtdblock1 " \ + "mtdparts=physmap-flash.0:-(nor);" \ + "at91_nand:-(root) " \ + "rw rootfstype=jffs2" #else @@ -154,6 +169,12 @@ #define CFG_ENV_ADDR (PHYS_FLASH_1 + CFG_ENV_OFFSET) #define CFG_ENV_SIZE 0x4000 #define CONFIG_BOOTCOMMAND "cp.b 0x10040000 0x72000000 0x200000; bootm" +#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ + "root=/dev/mtdblock4 " \ + "mtdparts=physmap-flash.0:16k(bootstrap)ro,"\ + "16k(env),224k(uboot)ro,-(linux);" \ + "at91_nand:-(root) " \ + "rw rootfstype=jffs2" #endif diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index 41c418f9ab..675224e0ba 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -56,10 +56,6 @@ #define CONFIG_USART3 1 /* USART 3 is DBGU */ #define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ - "root=/dev/mtdblock0 rw rootfstype=jffs2" - -/* #define CONFIG_ENV_OVERWRITE 1 */ /* * BOOTP options @@ -96,7 +92,7 @@ #define CFG_MAX_DATAFLASH_BANKS 2 #define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ #define CFG_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */ -#define AT91_SPI_CLK 33000000 +#define AT91_SPI_CLK 15000000 #define DATAFLASH_TCSS (0x1a << 16) #define DATAFLASH_TCHS (0x1 << 24) @@ -104,6 +100,7 @@ #define NAND_MAX_CHIPS 1 #define CFG_MAX_NAND_DEVICE 1 #define CFG_NAND_BASE 0x40000000 +#define CFG_NAND_DBW_8 1 /* NOR flash - no real flash on this board */ #define CFG_NO_FLASH 1 @@ -142,7 +139,11 @@ #define CFG_ENV_OFFSET 0x4200 #define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET) #define CFG_ENV_SIZE 0x4200 -#define CONFIG_BOOTCOMMAND "cp.b 0xC003DE00 0x22000000 0x200040; bootm" +#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm" +#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ + "root=/dev/mtdblock0 " \ + "mtdparts=at91_nand:-(root) " \ + "rw rootfstype=jffs2" #elif CFG_USE_DATAFLASH_CS1 @@ -152,7 +153,11 @@ #define CFG_ENV_OFFSET 0x4200 #define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS1 + CFG_ENV_OFFSET) #define CFG_ENV_SIZE 0x4200 -#define CONFIG_BOOTCOMMAND "cp.b 0xD003DE00 0x22000000 0x200040; bootm" +#define CONFIG_BOOTCOMMAND "cp.b 0xD0042000 0x22000000 0x210000; bootm" +#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ + "root=/dev/mtdblock0 " \ + "mtdparts=at91_nand:-(root) " \ + "rw rootfstype=jffs2" #else /* CFG_USE_NANDFLASH */ @@ -162,6 +167,12 @@ #define CFG_ENV_OFFSET_REDUND 0x80000 #define CFG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ #define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm" +#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ + "root=/dev/mtdblock5 " \ + "mtdparts=at91_nand:128k(bootstrap)ro," \ + "256k(uboot)ro,128k(env1)ro," \ + "128k(env2)ro,2M(linux),-(root) " \ + "rw rootfstype=jffs2" #endif diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h new file mode 100644 index 0000000000..e53a23f33f --- /dev/null +++ b/include/configs/at91sam9261ek.h @@ -0,0 +1,202 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian.pop@leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * + * Configuation settings for the AT91SAM9261EK board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* ARM asynchronous clock */ +#define AT91_CPU_NAME "AT91SAM9261" +#define AT91_MAIN_CLOCK 198656000 /* from 18.432 MHz crystal */ +#define AT91_MASTER_CLOCK 99328000 /* peripheral = main / 2 */ +#define CFG_HZ 1000000 /* 1us resolution */ + +#define AT91_SLOW_CLOCK 32768 /* slow clock */ + +#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ +#define CONFIG_AT91SAM9261 1 /* It's an Atmel AT91SAM9261 SoC*/ +#define CONFIG_AT91SAM9261EK 1 /* on an AT91SAM9261EK Board */ +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_SKIP_RELOCATE_UBOOT + +/* + * Hardware drivers + */ +#define CONFIG_ATMEL_USART 1 +#undef CONFIG_USART0 +#undef CONFIG_USART1 +#undef CONFIG_USART2 +#define CONFIG_USART3 1 /* USART 3 is DBGU */ + +/* LCD */ +#define CONFIG_LCD 1 +#define LCD_BPP LCD_COLOR8 +#define CONFIG_LCD_LOGO 1 +#undef LCD_TEST_PATTERN +#define CONFIG_LCD_INFO 1 +#define CONFIG_LCD_INFO_BELOW_LOGO 1 +#define CFG_WHITE_ON_BLACK 1 +#define CONFIG_ATMEL_LCD 1 +#define CONFIG_ATMEL_LCD_BGR555 1 +#define CFG_CONSOLE_IS_IN_ENV 1 + +#define CONFIG_BOOTDELAY 3 + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE 1 +#define CONFIG_BOOTP_BOOTPATH 1 +#define CONFIG_BOOTP_GATEWAY 1 +#define CONFIG_BOOTP_HOSTNAME 1 + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_IMI +#undef CONFIG_CMD_AUTOSCRIPT +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_IMLS + +#define CONFIG_CMD_PING 1 +#define CONFIG_CMD_DHCP 1 +#define CONFIG_CMD_NAND 1 +#define CONFIG_CMD_USB 1 + +/* SDRAM */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM 0x20000000 +#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */ + +/* DataFlash */ +#define CONFIG_HAS_DATAFLASH 1 +#define CFG_SPI_WRITE_TOUT (5*CFG_HZ) +#define CFG_MAX_DATAFLASH_BANKS 2 +#define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ +#define CFG_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* CS3 */ +#define AT91_SPI_CLK 15000000 +#define DATAFLASH_TCSS (0x1a << 16) +#define DATAFLASH_TCHS (0x1 << 24) + +/* NAND flash */ +#define NAND_MAX_CHIPS 1 +#define CFG_MAX_NAND_DEVICE 1 +#define CFG_NAND_BASE 0x40000000 +#define CFG_NAND_DBW_8 1 + +/* NOR flash - no real flash on this board */ +#define CFG_NO_FLASH 1 + +/* Ethernet */ +#define CONFIG_DRIVER_DM9000 1 +#define CONFIG_DM9000_BASE 0x30000000 +#define DM9000_IO CONFIG_DM9000_BASE +#define DM9000_DATA (CONFIG_DM9000_BASE + 4) +#define CONFIG_DM9000_USE_16BIT 1 +#define CONFIG_NET_RETRY_COUNT 20 +#define CONFIG_RESET_PHY_R 1 + +/* USB */ +#define CONFIG_USB_OHCI_NEW 1 +#define LITTLEENDIAN 1 +#define CONFIG_DOS_PARTITION 1 +#define CFG_USB_OHCI_CPU_INIT 1 +#define CFG_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9261_UHP_BASE */ +#define CFG_USB_OHCI_SLOT_NAME "at91sam9261" +#define CFG_USB_OHCI_MAX_ROOT_PORTS 2 +#define CONFIG_USB_STORAGE 1 + +#define CFG_LOAD_ADDR 0x22000000 /* load address */ + +#define CFG_MEMTEST_START PHYS_SDRAM +#define CFG_MEMTEST_END 0x23e00000 + +#define CFG_USE_DATAFLASH_CS0 1 +#undef CFG_USE_NANDFLASH + +#ifdef CFG_USE_DATAFLASH_CS0 + +/* bootstrap + u-boot + env + linux in dataflash on CS0 */ +#define CFG_ENV_IS_IN_DATAFLASH 1 +#define CFG_MONITOR_BASE (CFG_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400) +#define CFG_ENV_OFFSET 0x4200 +#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET) +#define CFG_ENV_SIZE 0x4200 +#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm" +#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ + "root=/dev/mtdblock0 " \ + "mtdparts=at91_nand:-(root) " \ + "rw rootfstype=jffs2" + +#else /* CFG_USE_NANDFLASH */ + +/* bootstrap + u-boot + env + linux in nandflash */ +#define CFG_ENV_IS_IN_NAND 1 +#define CFG_ENV_OFFSET 0x60000 +#define CFG_ENV_OFFSET_REDUND 0x80000 +#define CFG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ +#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm" +#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ + "root=/dev/mtdblock5 " \ + "mtdparts=at91_nand:128k(bootstrap)ro," \ + "256k(uboot)ro,128k(env1)ro," \ + "128k(env2)ro,2M(linux),-(root) " \ + "rw rootfstype=jffs2" + +#endif + +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } + +#define CFG_PROMPT "U-Boot> " +#define CFG_CBSIZE 256 +#define CFG_MAXARGS 16 +#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) +#define CFG_LONGHELP 1 +#define CONFIG_CMDLINE_EDITING 1 + +#define ROUND(A, B) (((A) + (B)) & ~((B) - 1)) +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN ROUND(3 * CFG_ENV_SIZE + 128*1024, 0x1000) +#define CFG_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ + +#define CONFIG_STACKSIZE (32*1024) /* regular stack */ + +#ifdef CONFIG_USE_IRQ +#error CONFIG_USE_IRQ not supported +#endif + +#endif diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h new file mode 100644 index 0000000000..a8194b564d --- /dev/null +++ b/include/configs/at91sam9263ek.h @@ -0,0 +1,206 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian.pop@leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * + * Configuation settings for the AT91SAM9263EK board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* ARM asynchronous clock */ +#define AT91_CPU_NAME "AT91SAM9263" +#define AT91_MAIN_CLOCK 199919000 /* from 16.367 MHz crystal */ +#define AT91_MASTER_CLOCK 99959500 /* peripheral = main / 2 */ +#define CFG_HZ 1000000 /* 1us resolution */ + +#define AT91_SLOW_CLOCK 32768 /* slow clock */ + +#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ +#define CONFIG_AT91SAM9263 1 /* It's an Atmel AT91SAM9263 SoC*/ +#define CONFIG_AT91SAM9263EK 1 /* on an AT91SAM9263EK Board */ +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_SKIP_RELOCATE_UBOOT + +/* + * Hardware drivers + */ +#define CONFIG_ATMEL_USART 1 +#undef CONFIG_USART0 +#undef CONFIG_USART1 +#undef CONFIG_USART2 +#define CONFIG_USART3 1 /* USART 3 is DBGU */ + +/* LCD */ +#define CONFIG_LCD 1 +#define LCD_BPP LCD_COLOR8 +#define CONFIG_LCD_LOGO 1 +#undef LCD_TEST_PATTERN +#define CONFIG_LCD_INFO 1 +#define CONFIG_LCD_INFO_BELOW_LOGO 1 +#define CFG_WHITE_ON_BLACK 1 +#define CONFIG_ATMEL_LCD 1 +#define CONFIG_ATMEL_LCD_BGR555 1 +#define CFG_CONSOLE_IS_IN_ENV 1 + +#define CONFIG_BOOTDELAY 3 + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE 1 +#define CONFIG_BOOTP_BOOTPATH 1 +#define CONFIG_BOOTP_GATEWAY 1 +#define CONFIG_BOOTP_HOSTNAME 1 + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_IMI +#undef CONFIG_CMD_AUTOSCRIPT +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_IMLS + +#define CONFIG_CMD_PING 1 +#define CONFIG_CMD_DHCP 1 +#define CONFIG_CMD_NAND 1 +#define CONFIG_CMD_USB 1 + +/* SDRAM */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM 0x20000000 +#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */ + +/* DataFlash */ +#define CONFIG_HAS_DATAFLASH 1 +#define CFG_SPI_WRITE_TOUT (5*CFG_HZ) +#define CFG_MAX_DATAFLASH_BANKS 1 +#define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ +#define AT91_SPI_CLK 15000000 +#define DATAFLASH_TCSS (0x1a << 16) +#define DATAFLASH_TCHS (0x1 << 24) + +/* NOR flash, if populated */ +#if 1 +#define CFG_NO_FLASH 1 +#else +#define CFG_FLASH_CFI 1 +#define CFG_FLASH_CFI_DRIVER 1 +#define PHYS_FLASH_1 0x10000000 +#define CFG_FLASH_BASE PHYS_FLASH_1 +#define CFG_MAX_FLASH_SECT 256 +#define CFG_MAX_FLASH_BANKS 1 +#endif + +/* NAND flash */ +#define NAND_MAX_CHIPS 1 +#define CFG_MAX_NAND_DEVICE 1 +#define CFG_NAND_BASE 0x40000000 +#define CFG_NAND_DBW_8 1 + +/* Ethernet */ +#define CONFIG_MACB 1 +#define CONFIG_RMII 1 +#define CONFIG_NET_MULTI 1 +#define CONFIG_NET_RETRY_COUNT 20 +#define CONFIG_RESET_PHY_R 1 + +/* USB */ +#define CONFIG_USB_OHCI_NEW 1 +#define LITTLEENDIAN 1 +#define CONFIG_DOS_PARTITION 1 +#define CFG_USB_OHCI_CPU_INIT 1 +#define CFG_USB_OHCI_REGS_BASE 0x00a00000 /* AT91SAM9263_UHP_BASE */ +#define CFG_USB_OHCI_SLOT_NAME "at91sam9263" +#define CFG_USB_OHCI_MAX_ROOT_PORTS 2 +#define CONFIG_USB_STORAGE 1 + +#define CFG_LOAD_ADDR 0x22000000 /* load address */ + +#define CFG_MEMTEST_START PHYS_SDRAM +#define CFG_MEMTEST_END 0x23e00000 + +#define CFG_USE_DATAFLASH 1 +#undef CFG_USE_NANDFLASH + +#ifdef CFG_USE_DATAFLASH + +/* bootstrap + u-boot + env + linux in dataflash on CS0 */ +#define CFG_ENV_IS_IN_DATAFLASH 1 +#define CFG_MONITOR_BASE (CFG_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400) +#define CFG_ENV_OFFSET 0x4200 +#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET) +#define CFG_ENV_SIZE 0x4200 +#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm" +#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ + "root=/dev/mtdblock0 " \ + "mtdparts=at91_nand:-(root) "\ + "rw rootfstype=jffs2" + +#else /* CFG_USE_NANDFLASH */ + +/* bootstrap + u-boot + env + linux in nandflash */ +#define CFG_ENV_IS_IN_NAND 1 +#define CFG_ENV_OFFSET 0x60000 +#define CFG_ENV_OFFSET_REDUND 0x80000 +#define CFG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ +#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm" +#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ + "root=/dev/mtdblock5 " \ + "mtdparts=at91_nand:128k(bootstrap)ro,256k(uboot)ro,128k(env1)ro,128k(env2)ro,2M(linux),-(root) " \ + "rw rootfstype=jffs2" + +#endif + +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } + +#define CFG_PROMPT "U-Boot> " +#define CFG_CBSIZE 256 +#define CFG_MAXARGS 16 +#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) +#define CFG_LONGHELP 1 +#define CONFIG_CMDLINE_EDITING 1 + +#define ROUND(A, B) (((A) + (B)) & ~((B) - 1)) +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN ROUND(3 * CFG_ENV_SIZE + 128*1024, 0x1000) +#define CFG_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ + +#define CONFIG_STACKSIZE (32*1024) /* regular stack */ + +#ifdef CONFIG_USE_IRQ +#error CONFIG_USE_IRQ not supported +#endif + +#endif diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h new file mode 100644 index 0000000000..2ad8d05eb0 --- /dev/null +++ b/include/configs/at91sam9rlek.h @@ -0,0 +1,175 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian.pop@leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * + * Configuation settings for the AT91SAM9RLEK board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* ARM asynchronous clock */ +#define AT91_CPU_NAME "AT91SAM9RL" +#define AT91_MAIN_CLOCK 200000000 /* from 12.000 MHz crystal */ +#define AT91_MASTER_CLOCK 100000000 /* peripheral = main / 2 */ +#define CFG_HZ 1000000 /* 1us resolution */ + +#define AT91_SLOW_CLOCK 32768 /* slow clock */ + +#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ +#define CONFIG_AT91SAM9RL 1 /* It's an Atmel AT91SAM9RL SoC*/ +#define CONFIG_AT91SAM9RLEK 1 /* on an AT91SAM9RLEK Board */ +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_SKIP_RELOCATE_UBOOT + +/* + * Hardware drivers + */ +#define CONFIG_ATMEL_USART 1 +#undef CONFIG_USART0 +#undef CONFIG_USART1 +#undef CONFIG_USART2 +#define CONFIG_USART3 1 /* USART 3 is DBGU */ + +/* LCD */ +#define CONFIG_LCD 1 +#define LCD_BPP LCD_COLOR8 +#define CONFIG_LCD_LOGO 1 +#undef LCD_TEST_PATTERN +#define CONFIG_LCD_INFO 1 +#define CONFIG_LCD_INFO_BELOW_LOGO 1 +#define CFG_WHITE_ON_BLACK 1 +#define CONFIG_ATMEL_LCD 1 +#define CONFIG_ATMEL_LCD_RGB565 1 +#define CFG_CONSOLE_IS_IN_ENV 1 + +#define CONFIG_BOOTDELAY 3 + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_IMI +#undef CONFIG_CMD_AUTOSCRIPT +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_USB + +#define CONFIG_CMD_NAND 1 + +/* SDRAM */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM 0x20000000 +#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */ + +/* DataFlash */ +#define CONFIG_HAS_DATAFLASH 1 +#define CFG_SPI_WRITE_TOUT (5*CFG_HZ) +#define CFG_MAX_DATAFLASH_BANKS 1 +#define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ +#define AT91_SPI_CLK 15000000 +#define DATAFLASH_TCSS (0x1a << 16) +#define DATAFLASH_TCHS (0x1 << 24) + +/* NOR flash - not present */ +#define CFG_NO_FLASH 1 + +/* NAND flash */ +#define NAND_MAX_CHIPS 1 +#define CFG_MAX_NAND_DEVICE 1 +#define CFG_NAND_BASE 0x40000000 +#define CFG_NAND_DBW_8 1 + +/* Ethernet - not present */ + +/* USB - not supported */ + +#define CFG_LOAD_ADDR 0x22000000 /* load address */ + +#define CFG_MEMTEST_START PHYS_SDRAM +#define CFG_MEMTEST_END 0x23e00000 + +#define CFG_USE_DATAFLASH 1 +#undef CFG_USE_NANDFLASH + +#ifdef CFG_USE_DATAFLASH + +/* bootstrap + u-boot + env + linux in dataflash on CS0 */ +#define CFG_ENV_IS_IN_DATAFLASH 1 +#define CFG_MONITOR_BASE (CFG_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400) +#define CFG_ENV_OFFSET 0x4200 +#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET) +#define CFG_ENV_SIZE 0x4200 +#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm" +#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ + "root=/dev/mtdblock0 " \ + "mtdparts=at91_nand:-(root) "\ + "rw rootfstype=jffs2" + +#else /* CFG_USE_NANDFLASH */ + +/* bootstrap + u-boot + env + linux in nandflash */ +#define CFG_ENV_IS_IN_NAND 1 +#define CFG_ENV_OFFSET 0x60000 +#define CFG_ENV_OFFSET_REDUND 0x80000 +#define CFG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ +#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm" +#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ + "root=/dev/mtdblock5 " \ + "mtdparts=at91_nand:128k(bootstrap)ro,256k(uboot)ro,128k(env1)ro,128k(env2)ro,2M(linux),-(root) " \ + "rw rootfstype=jffs2" + +#endif + +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } + +#define CFG_PROMPT "U-Boot> " +#define CFG_CBSIZE 256 +#define CFG_MAXARGS 16 +#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) +#define CFG_LONGHELP 1 +#define CONFIG_CMDLINE_EDITING 1 + +#define ROUND(A, B) (((A) + (B)) & ~((B) - 1)) +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN ROUND(3 * CFG_ENV_SIZE + 128*1024, 0x1000) +#define CFG_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ + +#define CONFIG_STACKSIZE (32*1024) /* regular stack */ + +#ifdef CONFIG_USE_IRQ +#error CONFIG_USE_IRQ not supported +#endif + +#endif diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h index 5aad043d89..3fc9975637 100644 --- a/include/configs/atngw100.h +++ b/include/configs/atngw100.h @@ -24,6 +24,8 @@ #ifndef __CONFIG_H #define __CONFIG_H +#include <asm/arch/memory-map.h> + #define CONFIG_AVR32 1 #define CONFIG_AT32AP 1 #define CONFIG_AT32AP7000 1 @@ -112,8 +114,11 @@ #define CONFIG_CMD_FAT #define CONFIG_CMD_JFFS2 #define CONFIG_CMD_MMC + +#undef CONFIG_CMD_AUTOSCRIPT #undef CONFIG_CMD_FPGA #undef CONFIG_CMD_SETGETDCR +#undef CONFIG_CMD_XIMG #define CONFIG_ATMEL_USART 1 #define CONFIG_MACB 1 @@ -137,11 +142,9 @@ #define CFG_MONITOR_BASE CFG_FLASH_BASE -#define CFG_INTRAM_BASE 0x24000000 -#define CFG_INTRAM_SIZE 0x8000 - -#define CFG_SDRAM_BASE 0x10000000 -#define CFG_SDRAM_16BIT 1 +#define CFG_INTRAM_BASE INTERNAL_SRAM_BASE +#define CFG_INTRAM_SIZE INTERNAL_SRAM_SIZE +#define CFG_SDRAM_BASE EBI_SDRAM_BASE #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_SIZE 65536 @@ -150,27 +153,20 @@ #define CFG_INIT_SP_ADDR (CFG_INTRAM_BASE + CFG_INTRAM_SIZE) #define CFG_MALLOC_LEN (256*1024) -#define CFG_MALLOC_END \ - ({ \ - DECLARE_GLOBAL_DATA_PTR; \ - CFG_SDRAM_BASE + gd->sdram_size; \ - }) -#define CFG_MALLOC_START (CFG_MALLOC_END - CFG_MALLOC_LEN) - #define CFG_DMA_ALLOC_LEN (16384) /* Allow 4MB for the kernel run-time image */ -#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00400000) +#define CFG_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000) #define CFG_BOOTPARAMS_LEN (16 * 1024) /* Other configuration settings that shouldn't have to change all that often */ -#define CFG_PROMPT "Uboot> " +#define CFG_PROMPT "U-Boot> " #define CFG_CBSIZE 256 #define CFG_MAXARGS 16 #define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) #define CFG_LONGHELP 1 -#define CFG_MEMTEST_START CFG_SDRAM_BASE +#define CFG_MEMTEST_START EBI_SDRAM_BASE #define CFG_MEMTEST_END (CFG_MEMTEST_START + 0x1f00000) #define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 } diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h index 95aeab6d4e..ba18eb63c7 100644 --- a/include/configs/atstk1002.h +++ b/include/configs/atstk1002.h @@ -24,6 +24,8 @@ #ifndef __CONFIG_H #define __CONFIG_H +#include <asm/arch/memory-map.h> + #define CONFIG_AVR32 1 #define CONFIG_AT32AP 1 #define CONFIG_AT32AP7000 1 @@ -139,9 +141,9 @@ #define CONFIG_CMD_FAT #define CONFIG_CMD_JFFS2 #define CONFIG_CMD_MMC -#define CONFIG_CMD_REGINFO #undef CONFIG_CMD_AUTOSCRIPT +#undef CONFIG_CMD_FPGA #undef CONFIG_CMD_SETGETDCR #undef CONFIG_CMD_XIMG @@ -170,10 +172,9 @@ #define CFG_MONITOR_BASE CFG_FLASH_BASE -#define CFG_INTRAM_BASE 0x24000000 -#define CFG_INTRAM_SIZE 0x8000 - -#define CFG_SDRAM_BASE 0x10000000 +#define CFG_INTRAM_BASE INTERNAL_SRAM_BASE +#define CFG_INTRAM_SIZE INTERNAL_SRAM_SIZE +#define CFG_SDRAM_BASE EBI_SDRAM_BASE #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_SIZE 65536 @@ -185,17 +186,17 @@ #define CFG_DMA_ALLOC_LEN (16384) /* Allow 4MB for the kernel run-time image */ -#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00400000) +#define CFG_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000) #define CFG_BOOTPARAMS_LEN (16 * 1024) /* Other configuration settings that shouldn't have to change all that often */ -#define CFG_PROMPT "Uboot> " +#define CFG_PROMPT "U-Boot> " #define CFG_CBSIZE 256 -#define CFG_MAXARGS 8 +#define CFG_MAXARGS 16 #define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) #define CFG_LONGHELP 1 -#define CFG_MEMTEST_START CFG_SDRAM_BASE +#define CFG_MEMTEST_START EBI_SDRAM_BASE #define CFG_MEMTEST_END (CFG_MEMTEST_START + 0x700000) #define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 } diff --git a/include/configs/atstk1003.h b/include/configs/atstk1003.h index 194788b18d..a528ddfb0e 100644 --- a/include/configs/atstk1003.h +++ b/include/configs/atstk1003.h @@ -24,6 +24,8 @@ #ifndef __CONFIG_H #define __CONFIG_H +#include <asm/arch/memory-map.h> + #define CONFIG_AVR32 1 #define CONFIG_AT32AP 1 #define CONFIG_AT32AP7001 1 @@ -153,10 +155,9 @@ #define CFG_MONITOR_BASE CFG_FLASH_BASE -#define CFG_INTRAM_BASE 0x24000000 -#define CFG_INTRAM_SIZE 0x8000 - -#define CFG_SDRAM_BASE 0x10000000 +#define CFG_INTRAM_BASE INTERNAL_SRAM_BASE +#define CFG_INTRAM_SIZE INTERNAL_SRAM_SIZE +#define CFG_SDRAM_BASE EBI_SDRAM_BASE #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_SIZE 65536 @@ -167,17 +168,17 @@ #define CFG_MALLOC_LEN (256*1024) /* Allow 4MB for the kernel run-time image */ -#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00400000) +#define CFG_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000) #define CFG_BOOTPARAMS_LEN (16 * 1024) /* Other configuration settings that shouldn't have to change all that often */ -#define CFG_PROMPT "Uboot> " +#define CFG_PROMPT "U-Boot> " #define CFG_CBSIZE 256 #define CFG_MAXARGS 16 #define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) #define CFG_LONGHELP 1 -#define CFG_MEMTEST_START CFG_SDRAM_BASE +#define CFG_MEMTEST_START EBI_SDRAM_BASE #define CFG_MEMTEST_END (CFG_MEMTEST_START + 0x700000) #define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 } diff --git a/include/configs/atstk1004.h b/include/configs/atstk1004.h index b81fc21270..fc9585e84d 100644 --- a/include/configs/atstk1004.h +++ b/include/configs/atstk1004.h @@ -24,6 +24,8 @@ #ifndef __CONFIG_H #define __CONFIG_H +#include <asm/arch/memory-map.h> + #define CONFIG_AVR32 1 #define CONFIG_AT32AP 1 #define CONFIG_AT32AP7002 1 @@ -153,11 +155,9 @@ #define CFG_MONITOR_BASE CFG_FLASH_BASE -#define CFG_INTRAM_BASE 0x24000000 -#define CFG_INTRAM_SIZE 0x8000 - -#define CFG_SDRAM_BASE 0x10000000 -#define CFG_SDRAM_16BIT 1 +#define CFG_INTRAM_BASE INTERNAL_SRAM_BASE +#define CFG_INTRAM_SIZE INTERNAL_SRAM_SIZE +#define CFG_SDRAM_BASE EBI_SDRAM_BASE #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_SIZE 65536 @@ -168,17 +168,17 @@ #define CFG_MALLOC_LEN (256*1024) /* Allow 2MB for the kernel run-time image */ -#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00200000) +#define CFG_LOAD_ADDR (EBI_SDRAM_BASE + 0x00200000) #define CFG_BOOTPARAMS_LEN (16 * 1024) /* Other configuration settings that shouldn't have to change all that often */ -#define CFG_PROMPT "Uboot> " +#define CFG_PROMPT "U-Boot> " #define CFG_CBSIZE 256 #define CFG_MAXARGS 16 #define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) #define CFG_LONGHELP 1 -#define CFG_MEMTEST_START CFG_SDRAM_BASE +#define CFG_MEMTEST_START EBI_SDRAM_BASE #define CFG_MEMTEST_END (CFG_MEMTEST_START + 0x700000) #define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 } diff --git a/include/configs/atstk1006.h b/include/configs/atstk1006.h new file mode 100644 index 0000000000..9fd49a53a3 --- /dev/null +++ b/include/configs/atstk1006.h @@ -0,0 +1,203 @@ +/* + * Copyright (C) 2005-2006 Atmel Corporation + * + * Configuration settings for the ATSTK1002 CPU daughterboard + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/arch/memory-map.h> + +#define CONFIG_AVR32 1 +#define CONFIG_AT32AP 1 +#define CONFIG_AT32AP7000 1 +#define CONFIG_ATSTK1006 1 +#define CONFIG_ATSTK1000 1 + +#define CONFIG_ATSTK1000_EXT_FLASH 1 + +/* + * Timer clock frequency. We're using the CPU-internal COUNT register + * for this, so this is equivalent to the CPU core clock frequency + */ +#define CFG_HZ 1000 + +/* + * Set up the PLL to run at 140 MHz, the CPU to run at the PLL + * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the + * PLL frequency. + * (CFG_OSC0_HZ * CFG_PLL0_MUL) / CFG_PLL0_DIV = PLL MHz + */ +#define CONFIG_PLL 1 +#define CFG_POWER_MANAGER 1 +#define CFG_OSC0_HZ 20000000 +#define CFG_PLL0_DIV 1 +#define CFG_PLL0_MUL 7 +#define CFG_PLL0_SUPPRESS_CYCLES 16 +/* + * Set the CPU running at: + * PLL / (2^CFG_CLKDIV_CPU) = CPU MHz + */ +#define CFG_CLKDIV_CPU 0 +/* + * Set the HSB running at: + * PLL / (2^CFG_CLKDIV_HSB) = HSB MHz + */ +#define CFG_CLKDIV_HSB 1 +/* + * Set the PBA running at: + * PLL / (2^CFG_CLKDIV_PBA) = PBA MHz + */ +#define CFG_CLKDIV_PBA 2 +/* + * Set the PBB running at: + * PLL / (2^CFG_CLKDIV_PBB) = PBB MHz + */ +#define CFG_CLKDIV_PBB 1 + +/* + * The PLLOPT register controls the PLL like this: + * icp = PLLOPT<2> + * ivco = PLLOPT<1:0> + * + * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz). + */ +#define CFG_PLL0_OPT 0x04 + +#undef CONFIG_USART0 +#define CONFIG_USART1 1 +#undef CONFIG_USART2 +#undef CONFIG_USART3 + +/* User serviceable stuff */ +#define CONFIG_DOS_PARTITION 1 + +#define CONFIG_CMDLINE_TAG 1 +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +#define CONFIG_STACKSIZE (2048) + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_BOOTARGS \ + "console=ttyS0 root=mtd3 fbmem=2400k" + +#define CONFIG_BOOTCOMMAND \ + "fsload; bootm $(fileaddr)" + +/* + * Only interrupt autoboot if <space> is pressed. Otherwise, garbage + * data on the serial line may interrupt the boot sequence. + */ +#define CONFIG_BOOTDELAY 1 +#define CONFIG_AUTOBOOT 1 +#define CONFIG_AUTOBOOT_KEYED 1 +#define CONFIG_AUTOBOOT_PROMPT \ + "Press SPACE to abort autoboot in %d seconds\n" +#define CONFIG_AUTOBOOT_DELAY_STR "d" +#define CONFIG_AUTOBOOT_STOP_STR " " + +/* + * After booting the board for the first time, new ethernet addresses + * should be generated and assigned to the environment variables + * "ethaddr" and "eth1addr". This is normally done during production. + */ +#define CONFIG_OVERWRITE_ETHADDR_ONCE 1 +#define CONFIG_NET_MULTI 1 + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MMC + +#undef CONFIG_CMD_AUTOSCRIPT +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_SETGETDCR +#undef CONFIG_CMD_XIMG + +#define CONFIG_ATMEL_USART 1 +#define CONFIG_MACB 1 +#define CONFIG_PIO2 1 +#define CFG_NR_PIOS 5 +#define CFG_HSDRAMC 1 +#define CONFIG_MMC 1 + +#define CFG_DCACHE_LINESZ 32 +#define CFG_ICACHE_LINESZ 32 + +#define CONFIG_NR_DRAM_BANKS 1 + +/* External flash on STK1000 */ +#if 0 +#define CFG_FLASH_CFI 1 +#define CFG_FLASH_CFI_DRIVER 1 +#endif + +#define CFG_FLASH_BASE 0x00000000 +#define CFG_FLASH_SIZE 0x800000 +#define CFG_MAX_FLASH_BANKS 1 +#define CFG_MAX_FLASH_SECT 135 + +#define CFG_MONITOR_BASE CFG_FLASH_BASE + +#define CFG_INTRAM_BASE INTERNAL_SRAM_BASE +#define CFG_INTRAM_SIZE INTERNAL_SRAM_SIZE +#define CFG_SDRAM_BASE EBI_SDRAM_BASE + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_SIZE 65536 +#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE) + +#define CFG_INIT_SP_ADDR (CFG_INTRAM_BASE + CFG_INTRAM_SIZE) + +#define CFG_MALLOC_LEN (256*1024) +#define CFG_DMA_ALLOC_LEN (16384) + +/* Allow 4MB for the kernel run-time image */ +#define CFG_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000) +#define CFG_BOOTPARAMS_LEN (16 * 1024) + +/* Other configuration settings that shouldn't have to change all that often */ +#define CFG_PROMPT "U-Boot> " +#define CFG_CBSIZE 256 +#define CFG_MAXARGS 16 +#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) +#define CFG_LONGHELP 1 + +#define CFG_MEMTEST_START EBI_SDRAM_BASE +#define CFG_MEMTEST_END (CFG_MEMTEST_START + 0x3f00000) +#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 } + +#endif /* __CONFIG_H */ diff --git a/include/configs/canmb.h b/include/configs/canmb.h index 0f7bb619ce..f097e2c2f0 100644 --- a/include/configs/canmb.h +++ b/include/configs/canmb.h @@ -40,6 +40,8 @@ #define CONFIG_BOARD_EARLY_INIT_R +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* * Serial console configuration */ diff --git a/include/configs/cm5200.h b/include/configs/cm5200.h index d554348021..ef50c7cabb 100644 --- a/include/configs/cm5200.h +++ b/include/configs/cm5200.h @@ -31,6 +31,8 @@ #define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ #define CONFIG_CM5200 1 /* ... on CM5200 platform */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* * Supported commands */ diff --git a/include/configs/cpci5200.h b/include/configs/cpci5200.h index 1b30e51a3f..fffd1fe1fa 100644 --- a/include/configs/cpci5200.h +++ b/include/configs/cpci5200.h @@ -50,6 +50,8 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* * Serial console configuration */ diff --git a/include/configs/hmi1001.h b/include/configs/hmi1001.h index e5a8897744..ad7cf76869 100644 --- a/include/configs/hmi1001.h +++ b/include/configs/hmi1001.h @@ -40,6 +40,8 @@ #define CONFIG_BOARD_EARLY_INIT_R +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* * Serial console configuration */ diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h index 4281d73c90..ec4ed1eeb6 100644 --- a/include/configs/imx31_litekit.h +++ b/include/configs/imx31_litekit.h @@ -65,7 +65,8 @@ #define CONFIG_HARD_SPI 1 #define CONFIG_MXC_SPI 1 -#define CONFIG_MXC_SPI_IFACE 1 +#define CONFIG_DEFAULT_SPI_BUS 1 +#define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_2 | SPI_CS_HIGH) #define CONFIG_RTC_MC13783 1 diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h index c89f041ee4..6ec92c38c5 100644 --- a/include/configs/inka4x0.h +++ b/include/configs/inka4x0.h @@ -40,6 +40,8 @@ #define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* * Serial console configuration */ diff --git a/include/configs/jupiter.h b/include/configs/jupiter.h index 980e9fe9ce..c9859270c0 100644 --- a/include/configs/jupiter.h +++ b/include/configs/jupiter.h @@ -41,6 +41,8 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* * Serial console configuration */ diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h index a9c86f9e3f..e4c3f7239b 100644 --- a/include/configs/mcc200.h +++ b/include/configs/mcc200.h @@ -40,6 +40,8 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* * Serial console configuration * diff --git a/include/configs/mecp5200.h b/include/configs/mecp5200.h index 5218d9ca97..8dfb9aa8a9 100644 --- a/include/configs/mecp5200.h +++ b/include/configs/mecp5200.h @@ -50,6 +50,8 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* * Serial console configuration */ diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h index 1503598166..b6843af3dc 100644 --- a/include/configs/motionpro.h +++ b/include/configs/motionpro.h @@ -35,6 +35,7 @@ #define CONFIG_MPC5200 1 /* More exactly a MPC5200 */ #define CONFIG_MOTIONPRO 1 /* ... on Promess Motion-PRO board */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ /* * BOOTP options diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h index f614e679f9..a218f7576c 100644 --- a/include/configs/mpc7448hpc2.h +++ b/include/configs/mpc7448hpc2.h @@ -39,7 +39,7 @@ #define CONFIG_MPC7448HPC2 #define CONFIG_74xx -#define CONFIG_750FX /* this option to enable init of extended BATs */ +#define CONFIG_HIGH_BATS /* High BATs supported */ #define CONFIG_ALTIVEC /* undef to disable */ #define CFG_BOARD_NAME "MPC7448 HPC II" diff --git a/include/configs/munices.h b/include/configs/munices.h index 38b27bb3a7..e0046ec2d3 100644 --- a/include/configs/munices.h +++ b/include/configs/munices.h @@ -35,6 +35,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ #define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ /* * Command line configuration. diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h index 2ea48a6da9..37ba872a43 100644 --- a/include/configs/mx31ads.h +++ b/include/configs/mx31ads.h @@ -62,7 +62,8 @@ #define CONFIG_HARD_SPI 1 #define CONFIG_MXC_SPI 1 -#define CONFIG_MXC_SPI_IFACE 1 /* Default SPI interface number */ +#define CONFIG_DEFAULT_SPI_BUS 1 +#define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_2 | SPI_CS_HIGH) #define CONFIG_RTC_MC13783 1 diff --git a/include/configs/o2dnt.h b/include/configs/o2dnt.h index 8dde1ef391..88bdb03e67 100644 --- a/include/configs/o2dnt.h +++ b/include/configs/o2dnt.h @@ -37,6 +37,8 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* * Serial console configuration */ diff --git a/include/configs/p3mx.h b/include/configs/p3mx.h index 0dac5161ba..0913b14a4c 100644 --- a/include/configs/p3mx.h +++ b/include/configs/p3mx.h @@ -42,6 +42,7 @@ #if defined (CONFIG_P3M750) #define CONFIG_750FX /* 750GL/GX/FX */ +#define CONFIG_HIGH_BATS /* High BATs supported */ #define CFG_BOARD_NAME "P3M750" #define CFG_BUS_HZ 100000000 #define CFG_BUS_CLK CFG_BUS_HZ diff --git a/include/configs/pf5200.h b/include/configs/pf5200.h index 2ce39c913c..c065d3328c 100644 --- a/include/configs/pf5200.h +++ b/include/configs/pf5200.h @@ -49,6 +49,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ /* * Serial console configuration */ diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index 0ebc674a69..74815567ff 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -570,6 +570,8 @@ #define CFG_HID2 HID2_HBE +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* DDR @ 0x00000000 */ #define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) #define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h index 81a1e072c6..146eafe9cc 100644 --- a/include/configs/sbc8560.h +++ b/include/configs/sbc8560.h @@ -42,6 +42,7 @@ #define CONFIG_CPM2 1 /* has CPM2 */ #define CONFIG_SBC8560 1 /* configuration for SBC8560 board */ +#define CONFIG_MPC8560 1 /* XXX flagging this as something I might want to delete */ #define CONFIG_MPC8560ADS 1 /* MPC8560ADS board specific */ diff --git a/include/configs/smmaco4.h b/include/configs/smmaco4.h index 4578cae7d6..3e47eb88a7 100644 --- a/include/configs/smmaco4.h +++ b/include/configs/smmaco4.h @@ -42,6 +42,8 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* * Serial console configuration */ diff --git a/include/configs/socrates.h b/include/configs/socrates.h index 23ed87f338..16274137dc 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -165,7 +165,7 @@ #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET #define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256kB for Mon*/ -#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ +#define CFG_MALLOC_LEN (256 * 1024) /* Reserved for malloc */ /* Serial Port */ @@ -216,18 +216,14 @@ #define CFG_EEPROM_PAGE_WRITE_ENABLE /* necessary for the LM75 chip */ #define CFG_EEPROM_PAGE_WRITE_BITS 4 -/* RapidIO MMU */ -#define CFG_RIO_MEM_BASE 0xc0000000 /* base address */ -#define CFG_RIO_MEM_PHYS CFG_RIO_MEM_BASE -#define CFG_RIO_MEM_SIZE 0x20000000 /* 128M */ - /* * General PCI * Memory space is mapped 1-1. */ #define CFG_PCI_PHYS 0x80000000 /* 1G PCI TLB */ - +/* PCI is clocked by the external source at 33 MHz */ +#define CONFIG_PCI_CLK_FREQ 33000000 #define CFG_PCI1_MEM_BASE 0x80000000 #define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE #define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */ @@ -237,13 +233,7 @@ #if defined(CONFIG_PCI) #define CONFIG_PCI_PNP /* do pci plug-and-play */ - -#define CONFIG_EEPRO100 -#undef CONFIG_TULIP - -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ - +#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #endif /* CONFIG_PCI */ @@ -389,10 +379,10 @@ "tftp ${fdt_addr_r} ${fdt_file}; " \ "run nfsargs addip addcons;" \ "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ - "fdt_file=$hostname/socrates.dtb\0" \ + "fdt_file=$hostname/socrates.dtb\0" \ "fdt_addr_r=B00000\0" \ "fdt_addr=FC1E0000\0" \ - "rootpath=/opt/eldk/ppc_85xx\0" \ + "rootpath=/opt/eldk/ppc_85xxDP\0" \ "kernel_addr=FC000000\0" \ "kernel_addr_r=200000\0" \ "ramdisk_addr=FC200000\0" \ @@ -419,4 +409,14 @@ #define CONFIG_DOS_PARTITION 1 #define CONFIG_USB_STORAGE 1 +/* FPGA and NAND */ +#define CFG_FPGA_BASE 0xc0000000 +#define CFG_BR3_PRELIM 0xc0001881 /* UPMA, 32-bit */ +#define CFG_OR3_PRELIM 0xfff00000 /* 1 MB */ + +#define CFG_NAND_BASE (CFG_FPGA_BASE + 0x70) +#define CFG_MAX_NAND_DEVICE 1 +#define NAND_MAX_CHIPS 1 +#define CONFIG_CMD_NAND + #endif /* __CONFIG_H */ diff --git a/include/configs/sorcery.h b/include/configs/sorcery.h index c62b9775c6..18f5533737 100644 --- a/include/configs/sorcery.h +++ b/include/configs/sorcery.h @@ -31,6 +31,8 @@ #define CONFIG_MPC8220 1 #define CONFIG_SORCERY 1 /* Sorcery board */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* Input clock running at 60Mhz, read Hid1 for the CPU multiplier to determine the CPU speed. */ #define CFG_MPC8220_CLKIN 60000000 /* ... running at 60MHz */ diff --git a/include/configs/spieval.h b/include/configs/spieval.h index 49213dc67a..69d2d67ab1 100644 --- a/include/configs/spieval.h +++ b/include/configs/spieval.h @@ -44,6 +44,8 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* * Serial console configuration */ diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h index ec04a30bec..6e8213d72a 100644 --- a/include/configs/stxgp3.h +++ b/include/configs/stxgp3.h @@ -41,6 +41,7 @@ #define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */ #define CONFIG_CPM2 1 /* has CPM2 */ #define CONFIG_STXGP3 1 /* Silicon Tx GPPP board specific*/ +#define CONFIG_MPC8560 1 #undef CONFIG_PCI /* pci ethernet support */ #define CONFIG_TSEC_ENET /* tsec ethernet support*/ diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h index d033c866d7..a1e9789ea0 100644 --- a/include/configs/stxssa.h +++ b/include/configs/stxssa.h @@ -41,6 +41,7 @@ #define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */ #define CONFIG_CPM2 1 /* has CPM2 */ #define CONFIG_STXSSA 1 /* Silicon Tx GPPP SSA board specific*/ +#define CONFIG_MPC8560 1 #define CONFIG_PCI /* PCI ethernet support */ #define CONFIG_TSEC_ENET /* tsec ethernet support*/ diff --git a/include/configs/uc101.h b/include/configs/uc101.h index dc1d7e1b3d..042750e2fe 100644 --- a/include/configs/uc101.h +++ b/include/configs/uc101.h @@ -40,6 +40,8 @@ #define CONFIG_BOARD_EARLY_INIT_R +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* * Serial console configuration */ diff --git a/include/configs/v38b.h b/include/configs/v38b.h index e24d6f77ae..c203522552 100644 --- a/include/configs/v38b.h +++ b/include/configs/v38b.h @@ -46,6 +46,8 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* * Serial console configuration */ diff --git a/include/lcd.h b/include/lcd.h index 8a4273cce1..44ac8ef8c7 100644 --- a/include/lcd.h +++ b/include/lcd.h @@ -155,7 +155,35 @@ typedef struct vidinfo { u_char vl_bpix; /* Bits per pixel, 0 = 1 */ } vidinfo_t; -#endif /* CONFIG_MPC823, CONFIG_PXA250 or CONFIG_MCC200 */ + +#elif defined(CONFIG_ATMEL_LCD) + +typedef struct vidinfo { + u_long vl_col; /* Number of columns (i.e. 640) */ + u_long vl_row; /* Number of rows (i.e. 480) */ + u_long vl_clk; /* pixel clock in ps */ + + /* LCD configuration register */ + u_long vl_sync; /* Horizontal / vertical sync */ + u_long vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */ + u_long vl_tft; /* 0 = passive, 1 = TFT */ + + /* Horizontal control register. */ + u_long vl_hsync_len; /* Length of horizontal sync */ + u_long vl_left_margin; /* Time from sync to picture */ + u_long vl_right_margin; /* Time from picture to sync */ + + /* Vertical control register. */ + u_long vl_vsync_len; /* Length of vertical sync */ + u_long vl_upper_margin; /* Time from sync to picture */ + u_long vl_lower_margin; /* Time from picture to sync */ + + u_long mmio; /* Memory mapped registers */ +} vidinfo_t; + +extern vidinfo_t panel_info; + +#endif /* CONFIG_MPC823, CONFIG_PXA250 or CONFIG_MCC200 or CONFIG_ATMEL_LCD */ /* Video functions */ diff --git a/include/linux/mtd/fsl_upm.h b/include/linux/mtd/fsl_upm.h index 634ff0291c..49fd8a60ff 100644 --- a/include/linux/mtd/fsl_upm.h +++ b/include/linux/mtd/fsl_upm.h @@ -16,7 +16,6 @@ #include <linux/mtd/nand.h> struct fsl_upm { - const u32 *array; void __iomem *mdr; void __iomem *mxmr; void __iomem *mar; diff --git a/include/linux/mtd/mtd-abi.h b/include/linux/mtd/mtd-abi.h index 72d7341d75..4cebea9597 100644 --- a/include/linux/mtd/mtd-abi.h +++ b/include/linux/mtd/mtd-abi.h @@ -93,7 +93,7 @@ struct nand_oobinfo { uint32_t useecc; uint32_t eccbytes; uint32_t oobfree[8][2]; - uint32_t eccpos[32]; + uint32_t eccpos[48]; }; #endif /* __MTD_ABI_H__ */ diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 4cc4a7d1bb..e2a25a60d8 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -385,6 +385,10 @@ struct nand_manufacturers { extern struct nand_flash_dev nand_flash_ids[]; extern struct nand_manufacturers nand_manuf_ids[]; +#ifndef NAND_MAX_CHIPS +#define NAND_MAX_CHIPS 8 +#endif + /** * struct nand_bbt_descr - bad block table descriptor * @options: options for this descriptor diff --git a/include/logbuff.h b/include/logbuff.h index d06d208844..ae7908ca3d 100644 --- a/include/logbuff.h +++ b/include/logbuff.h @@ -58,6 +58,7 @@ int drv_logbuff_init (void); void logbuff_init_ptrs (void); void logbuff_log(char *msg); void logbuff_reset (void); +unsigned long logbuffer_base (void); #endif /* CONFIG_LOGBUFFER */ diff --git a/include/mpc83xx.h b/include/mpc83xx.h index d2e1e2bb6c..939b82541a 100644 --- a/include/mpc83xx.h +++ b/include/mpc83xx.h @@ -14,6 +14,7 @@ #define __MPC83XX_H__ #include <config.h> +#include <asm/fsl_lbc.h> #if defined(CONFIG_E300) #include <asm/e300.h> #endif @@ -820,6 +821,7 @@ #define CSCONFIG_EN 0x80000000 #define CSCONFIG_AP 0x00800000 #define CSCONFIG_ODT_WR_ACS 0x00010000 +#define CSCONFIG_BANK_BIT_3 0x00004000 #define CSCONFIG_ROW_BIT 0x00000700 #define CSCONFIG_ROW_BIT_12 0x00000000 #define CSCONFIG_ROW_BIT_13 0x00000100 @@ -1019,239 +1021,6 @@ #define ECC_ERROR_MAN_SBEC (0xff000000>>24) /* Single Bit Error Counter 0..255 */ #define ECC_ERROR_MAN_SBEC_SHIFT 0 -/* BR - Base Registers - */ -#define BR0 0x5000 /* Register offset to immr */ -#define BR1 0x5008 -#define BR2 0x5010 -#define BR3 0x5018 -#define BR4 0x5020 -#define BR5 0x5028 -#define BR6 0x5030 -#define BR7 0x5038 - -#define BR_BA 0xFFFF8000 -#define BR_BA_SHIFT 15 -#define BR_PS 0x00001800 -#define BR_PS_SHIFT 11 -#define BR_PS_8 0x00000800 /* Port Size 8 bit */ -#define BR_PS_16 0x00001000 /* Port Size 16 bit */ -#define BR_PS_32 0x00001800 /* Port Size 32 bit */ -#define BR_DECC 0x00000600 -#define BR_DECC_SHIFT 9 -#define BR_DECC_OFF 0x00000000 -#define BR_DECC_CHK 0x00000200 -#define BR_DECC_CHK_GEN 0x00000400 -#define BR_WP 0x00000100 -#define BR_WP_SHIFT 8 -#define BR_MSEL 0x000000E0 -#define BR_MSEL_SHIFT 5 -#define BR_MS_GPCM 0x00000000 /* GPCM */ -#define BR_MS_FCM 0x00000020 /* FCM */ -#define BR_MS_SDRAM 0x00000060 /* SDRAM */ -#define BR_MS_UPMA 0x00000080 /* UPMA */ -#define BR_MS_UPMB 0x000000A0 /* UPMB */ -#define BR_MS_UPMC 0x000000C0 /* UPMC */ -#if !defined(CONFIG_MPC834X) -#define BR_ATOM 0x0000000C -#define BR_ATOM_SHIFT 2 -#endif -#define BR_V 0x00000001 -#define BR_V_SHIFT 0 - -#if defined(CONFIG_MPC834X) -#define BR_RES ~(BR_BA | BR_PS | BR_DECC | BR_WP | BR_MSEL | BR_V) -#else -#define BR_RES ~(BR_BA | BR_PS | BR_DECC | BR_WP | BR_MSEL | BR_ATOM | BR_V) -#endif - -/* OR - Option Registers - */ -#define OR0 0x5004 /* Register offset to immr */ -#define OR1 0x500C -#define OR2 0x5014 -#define OR3 0x501C -#define OR4 0x5024 -#define OR5 0x502C -#define OR6 0x5034 -#define OR7 0x503C - -#define OR_GPCM_AM 0xFFFF8000 -#define OR_GPCM_AM_SHIFT 15 -#define OR_GPCM_BCTLD 0x00001000 -#define OR_GPCM_BCTLD_SHIFT 12 -#define OR_GPCM_CSNT 0x00000800 -#define OR_GPCM_CSNT_SHIFT 11 -#define OR_GPCM_ACS 0x00000600 -#define OR_GPCM_ACS_SHIFT 9 -#define OR_GPCM_ACS_0b10 0x00000400 -#define OR_GPCM_ACS_0b11 0x00000600 -#define OR_GPCM_XACS 0x00000100 -#define OR_GPCM_XACS_SHIFT 8 -#define OR_GPCM_SCY 0x000000F0 -#define OR_GPCM_SCY_SHIFT 4 -#define OR_GPCM_SCY_1 0x00000010 -#define OR_GPCM_SCY_2 0x00000020 -#define OR_GPCM_SCY_3 0x00000030 -#define OR_GPCM_SCY_4 0x00000040 -#define OR_GPCM_SCY_5 0x00000050 -#define OR_GPCM_SCY_6 0x00000060 -#define OR_GPCM_SCY_7 0x00000070 -#define OR_GPCM_SCY_8 0x00000080 -#define OR_GPCM_SCY_9 0x00000090 -#define OR_GPCM_SCY_10 0x000000a0 -#define OR_GPCM_SCY_11 0x000000b0 -#define OR_GPCM_SCY_12 0x000000c0 -#define OR_GPCM_SCY_13 0x000000d0 -#define OR_GPCM_SCY_14 0x000000e0 -#define OR_GPCM_SCY_15 0x000000f0 -#define OR_GPCM_SETA 0x00000008 -#define OR_GPCM_SETA_SHIFT 3 -#define OR_GPCM_TRLX 0x00000004 -#define OR_GPCM_TRLX_SHIFT 2 -#define OR_GPCM_EHTR 0x00000002 -#define OR_GPCM_EHTR_SHIFT 1 -#define OR_GPCM_EAD 0x00000001 -#define OR_GPCM_EAD_SHIFT 0 - -#define OR_FCM_AM 0xFFFF8000 -#define OR_FCM_AM_SHIFT 15 -#define OR_FCM_BCTLD 0x00001000 -#define OR_FCM_BCTLD_SHIFT 12 -#define OR_FCM_PGS 0x00000400 -#define OR_FCM_PGS_SHIFT 10 -#define OR_FCM_CSCT 0x00000200 -#define OR_FCM_CSCT_SHIFT 9 -#define OR_FCM_CST 0x00000100 -#define OR_FCM_CST_SHIFT 8 -#define OR_FCM_CHT 0x00000080 -#define OR_FCM_CHT_SHIFT 7 -#define OR_FCM_SCY 0x00000070 -#define OR_FCM_SCY_SHIFT 4 -#define OR_FCM_SCY_1 0x00000010 -#define OR_FCM_SCY_2 0x00000020 -#define OR_FCM_SCY_3 0x00000030 -#define OR_FCM_SCY_4 0x00000040 -#define OR_FCM_SCY_5 0x00000050 -#define OR_FCM_SCY_6 0x00000060 -#define OR_FCM_SCY_7 0x00000070 -#define OR_FCM_RST 0x00000008 -#define OR_FCM_RST_SHIFT 3 -#define OR_FCM_TRLX 0x00000004 -#define OR_FCM_TRLX_SHIFT 2 -#define OR_FCM_EHTR 0x00000002 -#define OR_FCM_EHTR_SHIFT 1 - -#define OR_UPM_AM 0xFFFF8000 -#define OR_UPM_AM_SHIFT 15 -#define OR_UPM_XAM 0x00006000 -#define OR_UPM_XAM_SHIFT 13 -#define OR_UPM_BCTLD 0x00001000 -#define OR_UPM_BCTLD_SHIFT 12 -#define OR_UPM_BI 0x00000100 -#define OR_UPM_BI_SHIFT 8 -#define OR_UPM_TRLX 0x00000004 -#define OR_UPM_TRLX_SHIFT 2 -#define OR_UPM_EHTR 0x00000002 -#define OR_UPM_EHTR_SHIFT 1 -#define OR_UPM_EAD 0x00000001 -#define OR_UPM_EAD_SHIFT 0 - -#define OR_SDRAM_AM 0xFFFF8000 -#define OR_SDRAM_AM_SHIFT 15 -#define OR_SDRAM_XAM 0x00006000 -#define OR_SDRAM_XAM_SHIFT 13 -#define OR_SDRAM_COLS 0x00001C00 -#define OR_SDRAM_COLS_SHIFT 10 -#define OR_SDRAM_ROWS 0x000001C0 -#define OR_SDRAM_ROWS_SHIFT 6 -#define OR_SDRAM_PMSEL 0x00000020 -#define OR_SDRAM_PMSEL_SHIFT 5 -#define OR_SDRAM_EAD 0x00000001 -#define OR_SDRAM_EAD_SHIFT 0 - -#define OR_AM_32KB 0xFFFF8000 -#define OR_AM_64KB 0xFFFF0000 -#define OR_AM_128KB 0xFFFE0000 -#define OR_AM_256KB 0xFFFC0000 -#define OR_AM_512KB 0xFFF80000 -#define OR_AM_1MB 0xFFF00000 -#define OR_AM_2MB 0xFFE00000 -#define OR_AM_4MB 0xFFC00000 -#define OR_AM_8MB 0xFF800000 -#define OR_AM_16MB 0xFF000000 -#define OR_AM_32MB 0xFE000000 -#define OR_AM_64MB 0xFC000000 -#define OR_AM_128MB 0xF8000000 -#define OR_AM_256MB 0xF0000000 -#define OR_AM_512MB 0xE0000000 -#define OR_AM_1GB 0xC0000000 -#define OR_AM_2GB 0x80000000 -#define OR_AM_4GB 0x00000000 - -#define LBLAWAR_EN 0x80000000 -#define LBLAWAR_4KB 0x0000000B -#define LBLAWAR_8KB 0x0000000C -#define LBLAWAR_16KB 0x0000000D -#define LBLAWAR_32KB 0x0000000E -#define LBLAWAR_64KB 0x0000000F -#define LBLAWAR_128KB 0x00000010 -#define LBLAWAR_256KB 0x00000011 -#define LBLAWAR_512KB 0x00000012 -#define LBLAWAR_1MB 0x00000013 -#define LBLAWAR_2MB 0x00000014 -#define LBLAWAR_4MB 0x00000015 -#define LBLAWAR_8MB 0x00000016 -#define LBLAWAR_16MB 0x00000017 -#define LBLAWAR_32MB 0x00000018 -#define LBLAWAR_64MB 0x00000019 -#define LBLAWAR_128MB 0x0000001A -#define LBLAWAR_256MB 0x0000001B -#define LBLAWAR_512MB 0x0000001C -#define LBLAWAR_1GB 0x0000001D -#define LBLAWAR_2GB 0x0000001E - -/* LBCR - Local Bus Configuration Register - */ -#define LBCR_LDIS 0x80000000 -#define LBCR_LDIS_SHIFT 31 -#define LBCR_BCTLC 0x00C00000 -#define LBCR_BCTLC_SHIFT 22 -#define LBCR_LPBSE 0x00020000 -#define LBCR_LPBSE_SHIFT 17 -#define LBCR_EPAR 0x00010000 -#define LBCR_EPAR_SHIFT 16 -#define LBCR_BMT 0x0000FF00 -#define LBCR_BMT_SHIFT 8 - -/* LCRR - Clock Ratio Register - */ -#define LCRR_DBYP 0x80000000 -#define LCRR_DBYP_SHIFT 31 -#define LCRR_BUFCMDC 0x30000000 -#define LCRR_BUFCMDC_SHIFT 28 -#define LCRR_BUFCMDC_1 0x10000000 -#define LCRR_BUFCMDC_2 0x20000000 -#define LCRR_BUFCMDC_3 0x30000000 -#define LCRR_BUFCMDC_4 0x00000000 -#define LCRR_ECL 0x03000000 -#define LCRR_ECL_SHIFT 24 -#define LCRR_ECL_4 0x00000000 -#define LCRR_ECL_5 0x01000000 -#define LCRR_ECL_6 0x02000000 -#define LCRR_ECL_7 0x03000000 -#define LCRR_EADC 0x00030000 -#define LCRR_EADC_SHIFT 16 -#define LCRR_EADC_1 0x00010000 -#define LCRR_EADC_2 0x00020000 -#define LCRR_EADC_3 0x00030000 -#define LCRR_EADC_4 0x00000000 -#define LCRR_CLKDIV 0x0000000F -#define LCRR_CLKDIV_SHIFT 0 -#define LCRR_CLKDIV_2 0x00000002 -#define LCRR_CLKDIV_4 0x00000004 -#define LCRR_CLKDIV_8 0x00000008 - /* DMAMR - DMA Mode Register */ #define DMA_CHANNEL_START 0x00000001 /* Bit - DMAMRn CS */ diff --git a/include/mpc85xx.h b/include/mpc85xx.h index 321b24f755..a4d4d65526 100644 --- a/include/mpc85xx.h +++ b/include/mpc85xx.h @@ -6,6 +6,8 @@ #ifndef __MPC85xx_H__ #define __MPC85xx_H__ +#include <asm/fsl_lbc.h> + /* define for common ppc_asm.tmpl */ #define EXC_OFF_SYS_RESET 0x100 /* System reset */ #define _START_OFFSET 0 @@ -26,39 +28,4 @@ #define SCCR_DFBRG10 0x00000002 /* BRGCLK division by 64 */ #define SCCR_DFBRG11 0x00000003 /* BRGCLK division by 256 */ -/* - * Local Bus Controller - memory controller registers - */ -#define BRx_V 0x00000001 /* Bank Valid */ -#define BRx_MS_GPCM 0x00000000 /* G.P.C.M. Machine Select */ -#define BRx_MS_SDRAM 0x00000000 /* SDRAM Machine Select */ -#define BRx_MS_UPMA 0x00000080 /* U.P.M.A Machine Select */ -#define BRx_MS_UPMB 0x000000a0 /* U.P.M.B Machine Select */ -#define BRx_MS_UPMC 0x000000c0 /* U.P.M.C Machine Select */ -#define BRx_PS_8 0x00000800 /* 8 bit port size */ -#define BRx_PS_32 0x00001800 /* 32 bit port size */ -#define BRx_BA_MSK 0xffff8000 /* Base Address Mask */ - -#define ORxG_EAD 0x00000001 /* External addr latch delay */ -#define ORxG_EHTR 0x00000002 /* Extended hold time on read */ -#define ORxG_TRLX 0x00000004 /* Timing relaxed */ -#define ORxG_SETA 0x00000008 /* External address termination */ -#define ORxG_SCY_10_CLK 0x000000a0 /* 10 clock cycles wait states */ -#define ORxG_SCY_15_CLK 0x000000f0 /* 15 clock cycles wait states */ -#define ORxG_XACS 0x00000100 /* Extra addr to CS setup */ -#define ORxG_ACS_DIV2 0x00000600 /* CS is output 1/2 a clock later*/ -#define ORxG_CSNT 0x00000800 /* Chip Select Negation Time */ - -#define ORxU_BI 0x00000100 /* Burst Inhibit */ -#define ORxU_AM_MSK 0xffff8000 /* Address Mask Mask */ - -#define MxMR_OP_NORM 0x00000000 /* Normal Operation */ -#define MxMR_DSx_2_CYCL 0x00400000 /* 2 cycle Disable Period */ -#define MxMR_OP_WARR 0x10000000 /* Write to Array */ -#define MxMR_BSEL 0x80000000 /* Bus Select */ - -/* helpers to convert values into an OR address mask (GPCM mode) */ -#define P2SZ_TO_AM(s) ((~((s) - 1)) & 0xffff8000) /* must be pow of 2 */ -#define MEG_TO_AM(m) P2SZ_TO_AM((m) << 20) - #endif /* __MPC85xx_H__ */ diff --git a/include/mpc86xx.h b/include/mpc86xx.h index 9fd349af98..ce3d784da0 100644 --- a/include/mpc86xx.h +++ b/include/mpc86xx.h @@ -7,6 +7,8 @@ #ifndef __MPC86xx_H__ #define __MPC86xx_H__ +#include <asm/fsl_lbc.h> + #define EXC_OFF_SYS_RESET 0x0100 /* System reset offset */ #define _START_OFFSET EXC_OFF_SYS_RESET diff --git a/include/onenand_uboot.h b/include/onenand_uboot.h index bd1831ea6d..4449f987bf 100644 --- a/include/onenand_uboot.h +++ b/include/onenand_uboot.h @@ -14,6 +14,8 @@ #ifndef __UBOOT_ONENAND_H #define __UBOOT_ONENAND_H +#include <linux/types.h> + struct kvec { void *iov_base; size_t iov_len; @@ -22,6 +24,9 @@ struct kvec { typedef int spinlock_t; typedef int wait_queue_head_t; +struct mtd_info; +struct erase_info; + /* Functions */ extern void onenand_init(void); extern int onenand_read(struct mtd_info *mtd, loff_t from, size_t len, diff --git a/include/spi.h b/include/spi.h index 3a55a68c4d..7744c2e36b 100644 --- a/include/spi.h +++ b/include/spi.h @@ -31,22 +31,87 @@ #define SPI_MODE_1 (0|SPI_CPHA) #define SPI_MODE_2 (SPI_CPOL|0) #define SPI_MODE_3 (SPI_CPOL|SPI_CPHA) -#define SPI_CS_HIGH 0x04 /* chipselect active high? */ +#define SPI_CS_HIGH 0x04 /* CS active high */ #define SPI_LSB_FIRST 0x08 /* per-word bits-on-wire */ #define SPI_3WIRE 0x10 /* SI/SO signals shared */ #define SPI_LOOP 0x20 /* loopback mode */ -/* - * The function call pointer type used to drive the chip select. - */ -typedef void (*spi_chipsel_type)(int cs); +/* SPI transfer flags */ +#define SPI_XFER_BEGIN 0x01 /* Assert CS before transfer */ +#define SPI_XFER_END 0x02 /* Deassert CS after transfer */ +/*----------------------------------------------------------------------- + * Representation of a SPI slave, i.e. what we're communicating with. + * + * Drivers are expected to extend this with controller-specific data. + * + * bus: ID of the bus that the slave is attached to. + * cs: ID of the chip select connected to the slave. + */ +struct spi_slave { + unsigned int bus; + unsigned int cs; +}; /*----------------------------------------------------------------------- * Initialization, must be called once on start up. + * + * TODO: I don't think we really need this. */ void spi_init(void); +/*----------------------------------------------------------------------- + * Set up communications parameters for a SPI slave. + * + * This must be called once for each slave. Note that this function + * usually doesn't touch any actual hardware, it only initializes the + * contents of spi_slave so that the hardware can be easily + * initialized later. + * + * bus: Bus ID of the slave chip. + * cs: Chip select ID of the slave chip on the specified bus. + * max_hz: Maximum SCK rate in Hz. + * mode: Clock polarity, clock phase and other parameters. + * + * Returns: A spi_slave reference that can be used in subsequent SPI + * calls, or NULL if one or more of the parameters are not supported. + */ +struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, + unsigned int max_hz, unsigned int mode); + +/*----------------------------------------------------------------------- + * Free any memory associated with a SPI slave. + * + * slave: The SPI slave + */ +void spi_free_slave(struct spi_slave *slave); + +/*----------------------------------------------------------------------- + * Claim the bus and prepare it for communication with a given slave. + * + * This must be called before doing any transfers with a SPI slave. It + * will enable and initialize any SPI hardware as necessary, and make + * sure that the SCK line is in the correct idle state. It is not + * allowed to claim the same bus for several slaves without releasing + * the bus in between. + * + * slave: The SPI slave + * + * Returns: 0 if the bus was claimed successfully, or a negative value + * if it wasn't. + */ +int spi_claim_bus(struct spi_slave *slave); + +/*----------------------------------------------------------------------- + * Release the SPI bus + * + * This must be called once for every call to spi_claim_bus() after + * all transfers have finished. It may disable any SPI hardware as + * appropriate. + * + * slave: The SPI slave + */ +void spi_release_bus(struct spi_slave *slave); /*----------------------------------------------------------------------- * SPI transfer @@ -60,28 +125,67 @@ void spi_init(void); * input data overwrites the output data (since both are buffered by * temporary variables, this is OK). * - * If the chipsel() function is not NULL, it is called with a parameter - * of '1' (chip select active) at the start of the transfer and again with - * a parameter of '0' at the end of the transfer. - * - * If the chipsel() function _is_ NULL, it the responsibility of the - * caller to make the appropriate chip select active before calling - * spi_xfer() and making it inactive after spi_xfer() returns. - * * spi_xfer() interface: - * chipsel: Routine to call to set/clear the chip select: - * if chipsel is NULL, it is not used. - * if(cs), make the chip select active (typically '0'). - * if(!cs), make the chip select inactive (typically '1'). - * dout: Pointer to a string of bits to send out. The bits are - * held in a byte array and are sent MSB first. - * din: Pointer to a string of bits that will be filled in. - * bitlen: How many bits to write and read. + * slave: The SPI slave which will be sending/receiving the data. + * bitlen: How many bits to write and read. + * dout: Pointer to a string of bits to send out. The bits are + * held in a byte array and are sent MSB first. + * din: Pointer to a string of bits that will be filled in. + * flags: A bitwise combination of SPI_XFER_* flags. * * Returns: 0 on success, not 0 on failure */ -int spi_xfer(spi_chipsel_type chipsel, int bitlen, uchar *dout, uchar *din); +int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, + void *din, unsigned long flags); + +/*----------------------------------------------------------------------- + * Determine if a SPI chipselect is valid. + * This function is provided by the board if the low-level SPI driver + * needs it to determine if a given chipselect is actually valid. + * + * Returns: 1 if bus:cs identifies a valid chip on this board, 0 + * otherwise. + */ +int spi_cs_is_valid(unsigned int bus, unsigned int cs); + +/*----------------------------------------------------------------------- + * Activate a SPI chipselect. + * This function is provided by the board code when using a driver + * that can't control its chipselects automatically (e.g. + * common/soft_spi.c). When called, it should activate the chip select + * to the device identified by "slave". + */ +void spi_cs_activate(struct spi_slave *slave); + +/*----------------------------------------------------------------------- + * Deactivate a SPI chipselect. + * This function is provided by the board code when using a driver + * that can't control its chipselects automatically (e.g. + * common/soft_spi.c). When called, it should deactivate the chip + * select to the device identified by "slave". + */ +void spi_cs_deactivate(struct spi_slave *slave); + +/*----------------------------------------------------------------------- + * Write 8 bits, then read 8 bits. + * slave: The SPI slave we're communicating with + * byte: Byte to be written + * + * Returns: The value that was read, or a negative value on error. + * + * TODO: This function probably shouldn't be inlined. + */ +static inline int spi_w8r8(struct spi_slave *slave, unsigned char byte) +{ + unsigned char dout[2]; + unsigned char din[2]; + int ret; + + dout[0] = byte; + dout[1] = 0; -int spi_select(unsigned int bus, unsigned int dev, unsigned long mode); + ret = spi_xfer(slave, 16, dout, din, SPI_XFER_BEGIN | SPI_XFER_END); + return ret < 0 ? ret : din[1]; +} #endif /* _SPI_H_ */ diff --git a/include/spi_flash.h b/include/spi_flash.h new file mode 100644 index 0000000000..de4f174ad5 --- /dev/null +++ b/include/spi_flash.h @@ -0,0 +1,70 @@ +/* + * Interface to SPI flash + * + * Copyright (C) 2008 Atmel Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _SPI_FLASH_H_ +#define _SPI_FLASH_H_ + +#include <spi.h> + +struct spi_flash_region { + unsigned int count; + unsigned int size; +}; + +struct spi_flash { + struct spi_slave *spi; + + const char *name; + + u32 size; + + int (*read)(struct spi_flash *flash, u32 offset, + size_t len, void *buf); + int (*write)(struct spi_flash *flash, u32 offset, + size_t len, const void *buf); + int (*erase)(struct spi_flash *flash, u32 offset, + size_t len); +}; + +struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs, + unsigned int max_hz, unsigned int spi_mode); +void spi_flash_free(struct spi_flash *flash); + +static inline int spi_flash_read(struct spi_flash *flash, u32 offset, + size_t len, void *buf) +{ + return flash->read(flash, offset, len, buf); +} + +static inline int spi_flash_write(struct spi_flash *flash, u32 offset, + size_t len, const void *buf) +{ + return flash->write(flash, offset, len, buf); +} + +static inline int spi_flash_erase(struct spi_flash *flash, u32 offset, + size_t len) +{ + return flash->erase(flash, offset, len); +} + +#endif /* _SPI_FLASH_H_ */ |
