diff options
Diffstat (limited to 'include/configs')
110 files changed, 1353 insertions, 455 deletions
diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index 695e47bf07..832c10f5c0 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -387,6 +387,11 @@ extern int board_pci_host_broken(void); #define CONFIG_PQ_MDS_PIB 1 /* PQ MDS Platform IO Board */ #define CONFIG_HAS_FSL_DR_USB 1 /* fixup device tree for the DR USB */ +#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_FSL +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_PCI_PNP /* do pci plug-and-play */ diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index 1d1f4c0e22..8ed0f7c21a 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -685,6 +685,11 @@ #define CONFIG_ENV_OVERWRITE #define CONFIG_HAS_FSL_DR_USB +#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_FSL +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_NETDEV "eth1" diff --git a/include/configs/P1023RDB.h b/include/configs/P1023RDB.h index ba3da06dfb..6b29add78e 100644 --- a/include/configs/P1023RDB.h +++ b/include/configs/P1023RDB.h @@ -374,6 +374,49 @@ extern unsigned long get_clock_freq(void); #endif #define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ + "loadaddr=1000000\0" \ + "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ + "tftpflash=tftpboot $loadaddr $uboot; " \ + "protect off $ubootaddr +$filesize; " \ + "erase $ubootaddr +$filesize; " \ + "cp.b $loadaddr $ubootaddr $filesize; " \ + "protect on $ubootaddr +$filesize; " \ + "cmp.b $loadaddr $ubootaddr $filesize\0" \ + "consoledev=ttyS0\0" \ + "ramdiskaddr=2000000\0" \ + "ramdiskfile=rootfs.ext2.gz.uboot\0" \ + "fdtaddr=c00000\0" \ + "fdtfile=p1023rdb.dtb\0" \ + "othbootargs=ramdisk_size=600000\0" \ + "bdev=sda1\0" \ "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0" +#define CONFIG_HDBOOT \ + "setenv bootargs root=/dev/$bdev rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND + #endif /* __CONFIG_H */ diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h index 1d0664ddf6..2178f9d1fd 100644 --- a/include/configs/T1040QDS.h +++ b/include/configs/T1040QDS.h @@ -730,7 +730,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #ifdef CONFIG_CMD_KGDB #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index 2bb86e40ca..216f34f75b 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -745,7 +745,6 @@ #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #ifdef CONFIG_CMD_KGDB #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index 27333589af..2f381e7b49 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -791,7 +791,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #ifdef CONFIG_CMD_KGDB #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h index 400d979643..47b3bd5516 100644 --- a/include/configs/T208xRDB.h +++ b/include/configs/T208xRDB.h @@ -750,7 +750,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #ifdef CONFIG_CMD_KGDB #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h index e639e1d57a..48b8dc7fd7 100644 --- a/include/configs/T4240RDB.h +++ b/include/configs/T4240RDB.h @@ -533,7 +533,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ FTIM1_GPCM_TRAD(0x1f)) #define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ - FTIM2_GPCM_TCH(0x0) | \ + FTIM2_GPCM_TCH(0x8) | \ FTIM2_GPCM_TWP(0x1f)) #define CONFIG_SYS_CS3_FTIM3 0x0 diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h index a97f5faae4..94078f5481 100644 --- a/include/configs/VCMA9.h +++ b/include/configs/VCMA9.h @@ -20,8 +20,7 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_ARM920T /* This is an ARM920T Core */ -#define CONFIG_S3C24X0 /* in a SAMSUNG S3C24x0-type SoC */ +#define CONFIG_S3C24X0 /* This is a SAMSUNG S3C24x0-type SoC */ #define CONFIG_S3C2410 /* specifically a SAMSUNG S3C2410 SoC */ #define CONFIG_VCMA9 /* on a MPL VCMA9 Board */ #define CONFIG_MACH_TYPE MACH_TYPE_MPL_VCMA9 /* Machine type */ diff --git a/include/configs/a3m071.h b/include/configs/a3m071.h index a4050f34cc..120fdc6659 100644 --- a/include/configs/a3m071.h +++ b/include/configs/a3m071.h @@ -14,6 +14,8 @@ #define CONFIG_MPC5200 #define CONFIG_A3M071 /* A3M071 board */ +#define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_SYS_TEXT_BASE 0x01000000 /* boot low for 32 MiB boards */ diff --git a/include/configs/a4m072.h b/include/configs/a4m072.h index cc88ac1618..3c6765560e 100644 --- a/include/configs/a4m072.h +++ b/include/configs/a4m072.h @@ -19,6 +19,8 @@ #define CONFIG_MPC5200 1 /* This is a MPC5200 CPU */ #define CONFIG_A4M072 1 /* ... on A4M072 board */ #define CONFIG_MPC5200_DDR 1 /* ... use DDR RAM */ +#define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_SYS_TEXT_BASE 0xFE000000 diff --git a/include/configs/apf27.h b/include/configs/apf27.h index 4424c30441..403692d517 100644 --- a/include/configs/apf27.h +++ b/include/configs/apf27.h @@ -18,8 +18,7 @@ /* * SoC configurations */ -#define CONFIG_ARM926EJS /* this is an ARM926EJS CPU */ -#define CONFIG_MX27 /* in a Freescale i.MX27 Chip */ +#define CONFIG_MX27 /* This is a Freescale i.MX27 Chip */ #define CONFIG_MACH_TYPE 1698 /* APF27 */ #define CONFIG_SYS_GENERIC_BOARD diff --git a/include/configs/armadillo-800eva.h b/include/configs/armadillo-800eva.h index b073b97bae..72469f35b2 100644 --- a/include/configs/armadillo-800eva.h +++ b/include/configs/armadillo-800eva.h @@ -10,7 +10,6 @@ #define __ARMADILLO_800EVA_H #undef DEBUG -#define CONFIG_ARMV7 #define CONFIG_R8A7740 #define CONFIG_RMOBILE_BOARD_STRING "Armadillo-800EVA Board\n" #define CONFIG_SH_GPIO_PFC diff --git a/include/configs/arndale.h b/include/configs/arndale.h index f9ee40fa7e..81e8a7c3a3 100644 --- a/include/configs/arndale.h +++ b/include/configs/arndale.h @@ -9,6 +9,9 @@ #ifndef __CONFIG_ARNDALE_H #define __CONFIG_ARNDALE_H +#define EXYNOS_FDTFILE_SETTING \ + "fdtfile=exynos5250-arndale.dtb\0" + #include "exynos5250-common.h" /* SD/MMC configuration */ @@ -17,8 +20,6 @@ /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE -#define CONFIG_CMD_EXT2 - /* USB */ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_EXYNOS @@ -60,6 +61,4 @@ /* The PERIPHBASE in the CBAR register is wrong on the Arndale, so override it */ #define CONFIG_ARM_GIC_BASE_ADDRESS 0x10480000 -#define CONFIG_ARMV7_VIRT - #endif /* __CONFIG_H */ diff --git a/include/configs/bcm28155_ap.h b/include/configs/bcm28155_ap.h index bf09939c81..104577995e 100644 --- a/include/configs/bcm28155_ap.h +++ b/include/configs/bcm28155_ap.h @@ -10,8 +10,7 @@ #include <linux/sizes.h> #include <asm/arch/sysmap.h> -/* Architecture, CPU, chip, mach, etc */ -#define CONFIG_ARMV7 +/* CPU, chip, mach, etc */ #define CONFIG_KONA #define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_SYS_GENERIC_BOARD diff --git a/include/configs/bcm_ep_board.h b/include/configs/bcm_ep_board.h index 827844e9d9..fb85c7263b 100644 --- a/include/configs/bcm_ep_board.h +++ b/include/configs/bcm_ep_board.h @@ -9,8 +9,6 @@ #include <asm/arch/configs.h> -/* Architecture, CPU, chip, etc */ -#define CONFIG_ARMV7 #define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_SYS_GENERIC_BOARD diff --git a/include/configs/bct-brettl2.h b/include/configs/bct-brettl2.h index d0828d5f5c..39982ef72c 100644 --- a/include/configs/bct-brettl2.h +++ b/include/configs/bct-brettl2.h @@ -122,8 +122,8 @@ /* * I2C Settings */ -#define CONFIG_BFIN_TWI_I2C 1 -#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_ADI /* diff --git a/include/configs/bf518f-ezbrd.h b/include/configs/bf518f-ezbrd.h index 20f6ed1992..50e85ca93c 100644 --- a/include/configs/bf518f-ezbrd.h +++ b/include/configs/bf518f-ezbrd.h @@ -134,8 +134,8 @@ /* * I2C Settings */ -#define CONFIG_BFIN_TWI_I2C 1 -#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_ADI /* diff --git a/include/configs/bf526-ezbrd.h b/include/configs/bf526-ezbrd.h index c33d035022..7fc882a133 100644 --- a/include/configs/bf526-ezbrd.h +++ b/include/configs/bf526-ezbrd.h @@ -131,8 +131,8 @@ /* * I2C Settings */ -#define CONFIG_BFIN_TWI_I2C 1 -#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_ADI /* diff --git a/include/configs/bf527-ad7160-eval.h b/include/configs/bf527-ad7160-eval.h index b497f26773..c2958e834e 100644 --- a/include/configs/bf527-ad7160-eval.h +++ b/include/configs/bf527-ad7160-eval.h @@ -119,8 +119,8 @@ /* * I2C Settings */ -#define CONFIG_BFIN_TWI_I2C 1 -#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_ADI /* diff --git a/include/configs/bf527-ezkit.h b/include/configs/bf527-ezkit.h index 0bca53f2a6..79e440a0be 100644 --- a/include/configs/bf527-ezkit.h +++ b/include/configs/bf527-ezkit.h @@ -134,8 +134,8 @@ /* * I2C Settings */ -#define CONFIG_BFIN_TWI_I2C 1 -#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_ADI /* diff --git a/include/configs/bf527-sdp.h b/include/configs/bf527-sdp.h index 9d43b811e3..b374ab5772 100644 --- a/include/configs/bf527-sdp.h +++ b/include/configs/bf527-sdp.h @@ -103,8 +103,8 @@ /* * I2C Settings */ -#define CONFIG_BFIN_TWI_I2C 1 -#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_ADI /* diff --git a/include/configs/bf537-minotaur.h b/include/configs/bf537-minotaur.h index 3bc364ccfd..6df89af402 100644 --- a/include/configs/bf537-minotaur.h +++ b/include/configs/bf537-minotaur.h @@ -121,8 +121,8 @@ /* * I2C settings */ -#define CONFIG_BFIN_TWI_I2C 1 -#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_ADI #define CONFIG_SYS_I2C_SPEED 50000 #define CONFIG_SYS_I2C_SLAVE 0 diff --git a/include/configs/bf537-pnav.h b/include/configs/bf537-pnav.h index ba74a695f8..4f2b2cbf29 100644 --- a/include/configs/bf537-pnav.h +++ b/include/configs/bf537-pnav.h @@ -142,8 +142,8 @@ /* * I2C settings */ -#define CONFIG_BFIN_TWI_I2C 1 -#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_ADI /* diff --git a/include/configs/bf537-srv1.h b/include/configs/bf537-srv1.h index 0b723cf934..d01d88f3b4 100644 --- a/include/configs/bf537-srv1.h +++ b/include/configs/bf537-srv1.h @@ -120,8 +120,8 @@ /* * I2C settings */ -#define CONFIG_BFIN_TWI_I2C 1 -#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_ADI #define CONFIG_SYS_I2C_SPEED 50000 #define CONFIG_SYS_I2C_SLAVE 0 diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h index 29f9316067..7b5a5a7f71 100644 --- a/include/configs/bf537-stamp.h +++ b/include/configs/bf537-stamp.h @@ -128,8 +128,8 @@ /* * I2C Settings */ -#define CONFIG_BFIN_TWI_I2C 1 -#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_ADI /* diff --git a/include/configs/bf538f-ezkit.h b/include/configs/bf538f-ezkit.h index a65528246d..e60558e1b6 100644 --- a/include/configs/bf538f-ezkit.h +++ b/include/configs/bf538f-ezkit.h @@ -126,8 +126,8 @@ /* * I2C Settings */ -#define CONFIG_BFIN_TWI_I2C 1 -#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_ADI /* diff --git a/include/configs/bf548-ezkit.h b/include/configs/bf548-ezkit.h index da5f029435..e71e6d324c 100644 --- a/include/configs/bf548-ezkit.h +++ b/include/configs/bf548-ezkit.h @@ -134,8 +134,8 @@ /* * I2C Settings */ -#define CONFIG_BFIN_TWI_I2C 1 -#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_ADI /* diff --git a/include/configs/bf609-ezkit.h b/include/configs/bf609-ezkit.h index 12192ffb5d..878009ff66 100644 --- a/include/configs/bf609-ezkit.h +++ b/include/configs/bf609-ezkit.h @@ -81,8 +81,8 @@ #define CONFIG_PHYLIB /* i2c Settings */ -#define CONFIG_BFIN_TWI_I2C -#define CONFIG_HARD_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_ADI /* * Flash Settings diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h index 07ec5f2bd8..143d3ddd2d 100644 --- a/include/configs/bfin_adi_common.h +++ b/include/configs/bfin_adi_common.h @@ -73,7 +73,7 @@ # ifdef CONFIG_SPI_FLASH # define CONFIG_CMD_SF # endif -# if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C_SOFT) +# if defined(CONFIG_SYS_I2C) || defined(CONFIG_SYS_I2C_SOFT) # define CONFIG_CMD_I2C # define CONFIG_SOFT_I2C_READ_REPEATED_START # endif @@ -301,7 +301,7 @@ /* * I2C Settings */ -#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C_SOFT) +#if defined(CONFIG_SYS_I2C) || defined(CONFIG_SYS_I2C_SOFT) # ifndef CONFIG_SYS_I2C_SPEED # define CONFIG_SYS_I2C_SPEED 50000 # endif diff --git a/include/configs/br4.h b/include/configs/br4.h index 3f240085e3..48cf184826 100644 --- a/include/configs/br4.h +++ b/include/configs/br4.h @@ -102,8 +102,8 @@ /* * I2C Settings */ -#define CONFIG_BFIN_TWI_I2C -#define CONFIG_HARD_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_ADI /* diff --git a/include/configs/calimain.h b/include/configs/calimain.h index b27f973896..44c947f618 100644 --- a/include/configs/calimain.h +++ b/include/configs/calimain.h @@ -24,7 +24,6 @@ * SoC Configuration */ #define CONFIG_MACH_DAVINCI_CALIMAIN -#define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ #define CONFIG_SOC_DA850 /* TI DA850 SoC */ #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH diff --git a/include/configs/cam_enc_4xx.h b/include/configs/cam_enc_4xx.h index 5f30279fe6..f8785dbafc 100644 --- a/include/configs/cam_enc_4xx.h +++ b/include/configs/cam_enc_4xx.h @@ -14,7 +14,6 @@ #define CONFIG_SYS_CONSOLE_INFO_QUIET /* SoC Configuration */ -#define CONFIG_ARM926EJS /* arm926ejs CPU */ #define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */ #define CONFIG_SOC_DM365 diff --git a/include/configs/chromebook_link.h b/include/configs/chromebook_link.h new file mode 100644 index 0000000000..8caeca6430 --- /dev/null +++ b/include/configs/chromebook_link.h @@ -0,0 +1,74 @@ +/* + * Copyright (c) 2011 The Chromium OS Authors. + * (C) Copyright 2008 + * Graeme Russ, graeme.russ@gmail.com. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <configs/x86-common.h> + +#define CONFIG_SYS_CAR_ADDR 0xff7e0000 +#define CONFIG_SYS_CAR_SIZE (128 * 1024) +#define CONFIG_SYS_MONITOR_LEN (1 << 20) +#define CONFIG_DCACHE_RAM_MRC_VAR_SIZE 0x4000 +#define CONFIG_SYS_X86_START16 0xfffff800 +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_EARLY_INIT_R +#define CONFIG_DISPLAY_CPUINFO + +#define CONFIG_X86_RESET_VECTOR +#define CONFIG_NR_DRAM_BANKS 8 +#define CONFIG_X86_MRC_START 0xfffa0000 +#define CONFIG_CACHE_MRC_SIZE_KB 512 + +#define CONFIG_COREBOOT_SERIAL + +#define CONFIG_SCSI_DEV_LIST {PCI_VENDOR_ID_INTEL, \ + PCI_DEVICE_ID_INTEL_NM10_AHCI}, \ + {PCI_VENDOR_ID_INTEL, \ + PCI_DEVICE_ID_INTEL_COUGARPOINT_AHCI_MOBILE}, \ + {PCI_VENDOR_ID_INTEL, \ + PCI_DEVICE_ID_INTEL_COUGARPOINT_AHCI_SERIES6}, \ + {PCI_VENDOR_ID_INTEL, \ + PCI_DEVICE_ID_INTEL_PANTHERPOINT_AHCI_MOBILE} + +/* + * These common x86 features are not yet supported, but are added in + * follow-on patches in this series. Add undefs here to avoid every patch + * having to put things back into x86-common.h + */ +#undef CONFIG_VIDEO +#undef CONFIG_CFB_CONSOLE +#undef CONFIG_ICH_SPI +#undef CONFIG_SPI +#undef CONFIG_CMD_SPI +#undef CONFIG_CMD_SF +#undef CONFIG_USB_EHCI +#undef CONFIG_CMD_USB +#undef CONFIG_CMD_SCSI + +#define CONFIG_PCI_MEM_BUS 0xe0000000 +#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS +#define CONFIG_PCI_MEM_SIZE 0x10000000 + +#define CONFIG_PCI_PREF_BUS 0xd0000000 +#define CONFIG_PCI_PREF_PHYS CONFIG_PCI_PREF_BUS +#define CONFIG_PCI_PREF_SIZE 0x10000000 + +#define CONFIG_PCI_IO_BUS 0x1000 +#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS +#define CONFIG_PCI_IO_SIZE 0xefff + +#define CONFIG_STD_DEVICES_SETTINGS "stdin=usbkbd,vga,serial\0" \ + "stdout=vga,serial\0" \ + "stderr=vga,serial\0" + +#endif /* __CONFIG_H */ diff --git a/include/configs/cm-bf527.h b/include/configs/cm-bf527.h index f5351ad264..643c8379aa 100644 --- a/include/configs/cm-bf527.h +++ b/include/configs/cm-bf527.h @@ -113,8 +113,8 @@ /* * I2C Settings */ -#define CONFIG_BFIN_TWI_I2C 1 -#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_ADI /* diff --git a/include/configs/cm-bf537e.h b/include/configs/cm-bf537e.h index 1729b44a1b..e05956846c 100644 --- a/include/configs/cm-bf537e.h +++ b/include/configs/cm-bf537e.h @@ -122,8 +122,8 @@ /* * I2C Settings */ -#define CONFIG_BFIN_TWI_I2C 1 -#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_ADI /* diff --git a/include/configs/cm-bf537u.h b/include/configs/cm-bf537u.h index 272aa744a9..1f26457a95 100644 --- a/include/configs/cm-bf537u.h +++ b/include/configs/cm-bf537u.h @@ -120,8 +120,8 @@ /* * I2C Settings */ -#define CONFIG_BFIN_TWI_I2C 1 -#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_ADI /* diff --git a/include/configs/cm-bf548.h b/include/configs/cm-bf548.h index 7f27eda416..72eafc5699 100644 --- a/include/configs/cm-bf548.h +++ b/include/configs/cm-bf548.h @@ -104,8 +104,8 @@ /* * I2C Settings */ -#define CONFIG_BFIN_TWI_I2C 1 -#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_ADI /* diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h index fef267f70b..2581380483 100644 --- a/include/configs/coreboot.h +++ b/include/configs/coreboot.h @@ -6,7 +6,6 @@ * SPDX-License-Identifier: GPL-2.0+ */ -#include <asm/ibmpc.h> /* * board/config.h - configuration options, board specific */ @@ -14,27 +13,23 @@ #ifndef __CONFIG_H #define __CONFIG_H +#include <configs/x86-common.h> + /* * High Level Configuration Options * (easy to change) */ #define CONFIG_SYS_COREBOOT -#define CONFIG_SHOW_BOOT_PROGRESS #define CONFIG_LAST_STAGE_INIT -#define CONFIG_SYS_VSNPRINTF -#define CONFIG_ZBOOT_32 -#define CONFIG_PHYSMEM #define CONFIG_SYS_EARLY_PCI_INIT -#define CONFIG_DISPLAY_BOARDINFO_LATE -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DM -#define CONFIG_CMD_DM -#define CONFIG_DM_GPIO -#define CONFIG_DM_SERIAL +#define CONFIG_SYS_CAR_ADDR 0x19200000 +#define CONFIG_SYS_CAR_SIZE (16 * 1024) +#define CONFIG_SYS_MONITOR_LEN (256 * 1024) -#define CONFIG_LMB -#define CONFIG_OF_LIBFDT +#define CONFIG_TRACE_EARLY_SIZE (8 << 20) +#define CONFIG_TRACE_EARLY +#define CONFIG_TRACE_EARLY_ADDR 0x01400000 #define CONFIG_BOOTSTAGE #define CONFIG_BOOTSTAGE_REPORT @@ -45,26 +40,6 @@ #define CONFIG_BOOTSTAGE_STASH_SIZE 0x7fc #define CONFIG_BOOTSTAGE_USER_COUNT 60 -#define CONFIG_LZO -#define CONFIG_FIT -#undef CONFIG_ZLIB -#undef CONFIG_GZIP -#define CONFIG_SYS_BOOTM_LEN (16 << 20) - -/*----------------------------------------------------------------------- - * Watchdog Configuration - */ -#undef CONFIG_WATCHDOG -#undef CONFIG_HW_WATCHDOG - -/* SATA AHCI storage */ - -#define CONFIG_SCSI_AHCI - -#ifdef CONFIG_SCSI_AHCI -#define CONFIG_LIBATA -#define CONFIG_SYS_64BIT_LBA -#define CONFIG_SATA_INTEL 1 #define CONFIG_SCSI_DEV_LIST {PCI_VENDOR_ID_INTEL, \ PCI_DEVICE_ID_INTEL_NM10_AHCI}, \ {PCI_VENDOR_ID_INTEL, \ @@ -74,249 +49,27 @@ {PCI_VENDOR_ID_INTEL, \ PCI_DEVICE_ID_INTEL_PANTHERPOINT_AHCI_MOBILE} -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2 -#define CONFIG_SYS_SCSI_MAX_LUN 1 -#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ - CONFIG_SYS_SCSI_MAX_LUN) -#endif - -/* Generic TPM interfaced through LPC bus */ -#define CONFIG_TPM -#define CONFIG_TPM_TIS_LPC -#define CONFIG_TPM_TIS_BASE_ADDRESS 0xfed40000 - -/*----------------------------------------------------------------------- - * Real Time Clock Configuration - */ -#define CONFIG_RTC_MC146818 -#define CONFIG_SYS_ISA_IO_BASE_ADDRESS 0 -#define CONFIG_SYS_ISA_IO CONFIG_SYS_ISA_IO_BASE_ADDRESS - -/*----------------------------------------------------------------------- - * Serial Configuration - */ #define CONFIG_COREBOOT_SERIAL -#define CONFIG_SYS_NS16550 -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {300, 600, 1200, 2400, 4800, \ - 9600, 19200, 38400, 115200} -#define CONFIG_SYS_NS16550_PORT_MAPPED #define CONFIG_STD_DEVICES_SETTINGS "stdin=usbkbd,vga,serial\0" \ "stdout=vga,serial,cbmem\0" \ "stderr=vga,serial,cbmem\0" -#define CONFIG_CONSOLE_MUX -#define CONFIG_SYS_CONSOLE_IS_IN_ENV -#define CONFIG_SYS_STDIO_DEREGISTER #define CONFIG_CBMEM_CONSOLE -#define CONFIG_CMDLINE_EDITING -#define CONFIG_COMMAND_HISTORY -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER - -#define CONFIG_SUPPORT_VFAT -/************************************************************ - * ATAPI support (experimental) - ************************************************************/ -#define CONFIG_ATAPI - -/************************************************************ - * DISK Partition support - ************************************************************/ -#define CONFIG_EFI_PARTITION -#define CONFIG_DOS_PARTITION -#define CONFIG_MAC_PARTITION -#define CONFIG_ISO_PARTITION /* Experimental */ - -#define CONFIG_CMD_PART -#define CONFIG_CMD_CBFS -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_EXT4_WRITE -#define CONFIG_PARTITION_UUIDS - -/*----------------------------------------------------------------------- - * Video Configuration - */ -#define CONFIG_VIDEO #define CONFIG_VIDEO_COREBOOT -#define CONFIG_VIDEO_SW_CURSOR -#define VIDEO_FB_16BPP_WORD_SWAP -#define CONFIG_I8042_KBD -#define CONFIG_CFB_CONSOLE -#define CONFIG_SYS_CONSOLE_INFO_QUIET -/* x86 GPIOs are accessed through a PCI device */ -#define CONFIG_INTEL_ICH6_GPIO - -/*----------------------------------------------------------------------- - * Command line configuration. - */ -#include <config_cmd_default.h> +#define CONFIG_NR_DRAM_BANKS 4 #define CONFIG_TRACE #define CONFIG_CMD_TRACE #define CONFIG_TRACE_BUFFER_SIZE (16 << 20) -#define CONFIG_TRACE_EARLY_SIZE (8 << 20) -#define CONFIG_TRACE_EARLY -#define CONFIG_TRACE_EARLY_ADDR 0x01400000 - -#define CONFIG_CMD_BDI -#define CONFIG_CMD_BOOTD -#define CONFIG_CMD_CONSOLE -#define CONFIG_CMD_DATE -#define CONFIG_CMD_ECHO -#undef CONFIG_CMD_FLASH -#define CONFIG_CMD_FPGA -#define CONFIG_CMD_FPGA_LOADMK -#define CONFIG_CMD_GPIO -#define CONFIG_CMD_IMI -#undef CONFIG_CMD_IMLS -#define CONFIG_CMD_IO -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_ITEST -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_LOADS -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_MISC -#define CONFIG_CMD_NET -#undef CONFIG_CMD_NFS -#define CONFIG_CMD_PCI -#define CONFIG_CMD_PING -#define CONFIG_CMD_RUN -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_SETGETDCR -#define CONFIG_CMD_SOURCE -#define CONFIG_CMD_TIME -#define CONFIG_CMD_GETTIME -#define CONFIG_CMD_XIMG -#define CONFIG_CMD_SCSI - -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 - -#define CONFIG_CMD_ZBOOT -#define CONFIG_CMD_ELF #define CONFIG_BOOTDELAY 2 -#define CONFIG_BOOTARGS \ - "root=/dev/sdb3 init=/sbin/init rootwait ro" -#define CONFIG_BOOTCOMMAND \ - "ext2load scsi 0:3 01000000 /boot/vmlinuz; zboot 01000000" - - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 115200 -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_CBSIZE 512 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + \ - 16) -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -#define CONFIG_SYS_MEMTEST_START 0x00100000 -#define CONFIG_SYS_MEMTEST_END 0x01000000 -#define CONFIG_SYS_LOAD_ADDR 0x20000000 - -/*----------------------------------------------------------------------- - * SDRAM Configuration - */ -#define CONFIG_NR_DRAM_BANKS 4 - -/* CONFIG_SYS_SDRAM_DRCTMCTL Overrides the following*/ -#undef CONFIG_SYS_SDRAM_PRECHARGE_DELAY -#undef CONFIG_SYS_SDRAM_RAS_CAS_DELAY -#undef CONFIG_SYS_SDRAM_CAS_LATENCY_2T -#undef CONFIG_SYS_SDRAM_CAS_LATENCY_3T - -/*----------------------------------------------------------------------- - * CPU Features - */ - -#define CONFIG_SYS_X86_TSC_TIMER -#define CONFIG_SYS_PCAT_INTERRUPTS -#define CONFIG_SYS_PCAT_TIMER -#define CONFIG_SYS_NUM_IRQS 16 - -/*----------------------------------------------------------------------- - * Memory organization: - * 32kB Stack - * 16kB Cache-As-RAM @ 0x19200000 - * 256kB Monitor - * (128kB + Environment Sector Size) malloc pool - */ -#define CONFIG_SYS_STACK_SIZE (32 * 1024) -#define CONFIG_SYS_CAR_ADDR 0x19200000 -#define CONFIG_SYS_CAR_SIZE (16 * 1024) -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) -#define CONFIG_SYS_MALLOC_LEN (0x20000 + 128 * 1024) -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -/*----------------------------------------------------------------------- - * FLASH configuration - */ -#define CONFIG_ICH_SPI -#define CONFIG_SPI_FLASH -#define CONFIG_SPI_FLASH_MACRONIX -#define CONFIG_SPI_FLASH_WINBOND -#define CONFIG_SPI_FLASH_GIGADEVICE -#define CONFIG_SYS_NO_FLASH -#define CONFIG_CMD_SF -#define CONFIG_CMD_SF_TEST -#define CONFIG_CMD_SPI -#define CONFIG_SPI - -/*----------------------------------------------------------------------- - * Environment configuration - */ -#define CONFIG_ENV_IS_NOWHERE -#define CONFIG_ENV_SIZE 0x01000 - -/*----------------------------------------------------------------------- - * PCI configuration - */ -#define CONFIG_PCI #define CONFIG_CROS_EC #define CONFIG_CROS_EC_LPC #define CONFIG_CMD_CROS_EC #define CONFIG_ARCH_EARLY_INIT_R -/*----------------------------------------------------------------------- - * USB configuration - */ -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_PCI -#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 12 -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 -#define CONFIG_USB_STORAGE -#define CONFIG_USB_KEYBOARD -#define CONFIG_SYS_USB_EVENT_POLL - -#define CONFIG_USB_HOST_ETHER -#define CONFIG_USB_ETHER_ASIX -#define CONFIG_USB_ETHER_SMSC95XX -#define CONFIG_TFTP_TSIZE -#define CONFIG_CMD_DHCP -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -#define CONFIG_CMD_USB - -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_STD_DEVICES_SETTINGS - #endif /* __CONFIG_H */ diff --git a/include/configs/cpuat91.h b/include/configs/cpuat91.h index ce521012f2..8c7d97a18e 100644 --- a/include/configs/cpuat91.h +++ b/include/configs/cpuat91.h @@ -26,7 +26,6 @@ #define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK / 3) #define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK / 2) -#define CONFIG_ARM920T #define CONFIG_AT91RM9200 #define CONFIG_CPUAT91 #define USE_920T_MMU diff --git a/include/configs/da830evm.h b/include/configs/da830evm.h index 27171950a6..0bdcef7006 100644 --- a/include/configs/da830evm.h +++ b/include/configs/da830evm.h @@ -21,7 +21,6 @@ * SoC Configuration */ #define CONFIG_MACH_DAVINCI_DA830_EVM -#define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ #define CONFIG_SOC_DA830 /* TI DA830 SoC */ #define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index 5f85755737..e5f8afef1e 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -25,7 +25,6 @@ * SoC Configuration */ #define CONFIG_MACH_DAVINCI_DA850_EVM -#define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ #define CONFIG_SOC_DA850 /* TI DA850 SoC */ #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH diff --git a/include/configs/davinci_dm355evm.h b/include/configs/davinci_dm355evm.h index c2e187e3de..16b901b01b 100644 --- a/include/configs/davinci_dm355evm.h +++ b/include/configs/davinci_dm355evm.h @@ -15,7 +15,6 @@ #define CONFIG_SYS_CONSOLE_INFO_QUIET /* SoC Configuration */ -#define CONFIG_ARM926EJS /* arm926ejs CPU */ #define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */ #define CONFIG_SOC_DM355 diff --git a/include/configs/davinci_dm355leopard.h b/include/configs/davinci_dm355leopard.h index 5188fdf878..4eed72292d 100644 --- a/include/configs/davinci_dm355leopard.h +++ b/include/configs/davinci_dm355leopard.h @@ -14,7 +14,6 @@ #define CONFIG_SYS_CONSOLE_INFO_QUIET /* SoC Configuration */ -#define CONFIG_ARM926EJS /* arm926ejs CPU */ #define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */ #define CONFIG_SOC_DM355 /* DM355 based board */ diff --git a/include/configs/davinci_dm365evm.h b/include/configs/davinci_dm365evm.h index c4fccfd39a..c50c059f65 100644 --- a/include/configs/davinci_dm365evm.h +++ b/include/configs/davinci_dm365evm.h @@ -15,7 +15,6 @@ #define CONFIG_SYS_CONSOLE_INFO_QUIET /* SoC Configuration */ -#define CONFIG_ARM926EJS /* arm926ejs CPU */ #define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */ #define CONFIG_SOC_DM365 diff --git a/include/configs/davinci_dm6467evm.h b/include/configs/davinci_dm6467evm.h index b1b18ad041..2c5a837f66 100644 --- a/include/configs/davinci_dm6467evm.h +++ b/include/configs/davinci_dm6467evm.h @@ -15,7 +15,6 @@ #define CONFIG_SKIP_LOWLEVEL_INIT /* SoC Configuration */ -#define CONFIG_ARM926EJS /* arm926ejs CPU */ /* Clock rates detection */ #ifndef __ASSEMBLY__ diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h index 9b3d0febc0..2467f70522 100644 --- a/include/configs/davinci_dvevm.h +++ b/include/configs/davinci_dvevm.h @@ -41,7 +41,6 @@ /*===================*/ /* SoC Configuration */ /*===================*/ -#define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */ #define CONFIG_SOC_DM644X diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h index 96c8fe2a4d..2505465242 100644 --- a/include/configs/davinci_schmoogie.h +++ b/include/configs/davinci_schmoogie.h @@ -19,7 +19,6 @@ /*===================*/ /* SoC Configuration */ /*===================*/ -#define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */ #define CONFIG_SOC_DM644X diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h index 6e07cce766..e773835dd9 100644 --- a/include/configs/davinci_sffsdr.h +++ b/include/configs/davinci_sffsdr.h @@ -16,7 +16,6 @@ #define CONFIG_SYS_USE_NAND #define CONFIG_SYS_USE_DSPLINK /* don't power up the DSP. */ /* SoC Configuration */ -#define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */ #define CONFIG_SOC_DM644X diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h index cd23aaca20..dae37cdaf6 100644 --- a/include/configs/davinci_sonata.h +++ b/include/configs/davinci_sonata.h @@ -43,7 +43,6 @@ /*===================*/ /* SoC Configuration */ /*===================*/ -#define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */ #define CONFIG_SOC_DM644X diff --git a/include/configs/dlvision.h b/include/configs/dlvision.h index af0d60249a..a9cfc10d0c 100644 --- a/include/configs/dlvision.h +++ b/include/configs/dlvision.h @@ -35,6 +35,7 @@ /* new uImage format support */ #define CONFIG_FIT #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ +#define CONFIG_FIT_DISABLE_SHA256 #define CONFIG_ENV_IS_IN_FLASH /* use FLASH for environment vars */ @@ -59,8 +60,14 @@ /* * Commands additional to the ones defined in amcc-common.h */ -#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DTT +#undef CONFIG_CMD_DHCP +#undef CONFIG_CMD_DIAG #undef CONFIG_CMD_EEPROM +#undef CONFIG_CMD_ELF +#undef CONFIG_CMD_I2C +#undef CONFIG_CMD_IRQ +#undef CONFIG_CMD_NFS /* * SDRAM configuration (please see cpu/ppc/sdram.[ch]) diff --git a/include/configs/ea20.h b/include/configs/ea20.h index 1d50a37d2f..ae89368bfb 100644 --- a/include/configs/ea20.h +++ b/include/configs/ea20.h @@ -28,7 +28,6 @@ * SoC Configuration */ #define CONFIG_MACH_DAVINCI_DA850_EVM -#define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ #define CONFIG_SOC_DA850 /* TI DA850 SoC */ #define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) diff --git a/include/configs/edb93xx.h b/include/configs/edb93xx.h index 47a8420f42..a82e8bcadc 100644 --- a/include/configs/edb93xx.h +++ b/include/configs/edb93xx.h @@ -85,8 +85,7 @@ #endif /* High-level configuration options */ -#define CONFIG_ARM920T 1 /* This is an ARM920T core... */ -#define CONFIG_EP93XX 1 /* in a Cirrus Logic 93xx SoC */ +#define CONFIG_EP93XX 1 /* This is a Cirrus Logic 93xx SoC */ #define CONFIG_SYS_CLK_FREQ 14745600 /* EP93xx has a 14.7456 clock */ #undef CONFIG_USE_IRQ /* Don't need IRQ/FIQ */ diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h index 1df4fc1986..70a698ab32 100644 --- a/include/configs/edminiv2.h +++ b/include/configs/edminiv2.h @@ -23,7 +23,6 @@ */ #define CONFIG_MARVELL 1 -#define CONFIG_ARM926EJS 1 /* Basic Architecture */ #define CONFIG_FEROCEON 1 /* CPU Core subversion */ #define CONFIG_88F5182 1 /* SOC Name */ #define CONFIG_MACH_EDMINIV2 1 /* Machine type */ diff --git a/include/configs/enbw_cmc.h b/include/configs/enbw_cmc.h index 30ca95f02d..cdea4a8546 100644 --- a/include/configs/enbw_cmc.h +++ b/include/configs/enbw_cmc.h @@ -25,7 +25,6 @@ /* * SoC Configuration */ -#define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ #define CONFIG_SOC_DA850 /* TI DA850 SoC */ #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH diff --git a/include/configs/exynos-common.h b/include/configs/exynos-common.h index b258cb93c4..1f3ee55098 100644 --- a/include/configs/exynos-common.h +++ b/include/configs/exynos-common.h @@ -30,9 +30,6 @@ #define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_BOARD_EARLY_INIT_F -/* Enable fdt support */ -#define CONFIG_OF_LIBFDT - /* Keep L2 Cache Disabled */ #define CONFIG_CMD_CACHE @@ -42,7 +39,6 @@ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_CMDLINE_TAG #define CONFIG_INITRD_TAG -#define CONFIG_CMDLINE_EDITING #define CONFIG_ENV_OVERWRITE /* Size of malloc() pool before and after relocation */ @@ -61,7 +57,6 @@ #define CONFIG_EXYNOS_DWMMC #define CONFIG_BOUNCE_BUFFER -#define CONFIG_BOOTDELAY 3 #define CONFIG_ZERO_BOOTDELAY_CHECK /* PWM */ @@ -71,22 +66,16 @@ #include <config_cmd_default.h> #define CONFIG_CMD_MMC -#define CONFIG_CMD_EXT4 #define CONFIG_CMD_EXT4_WRITE -#define CONFIG_CMD_FAT #define CONFIG_FAT_WRITE #define CONFIG_CMD_FS_GENERIC -#define CONFIG_DOS_PARTITION -#define CONFIG_EFI_PARTITION #define CONFIG_CMD_PART #define CONFIG_PARTITION_UUIDS /* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE 1024 /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Boot Argument Buffer Size */ @@ -96,4 +85,6 @@ #define CONFIG_SYS_NO_FLASH #undef CONFIG_CMD_IMLS +#include <config_distro_defaults.h> + #endif /* __CONFIG_H */ diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h index ba591e7c1e..8f9b780003 100644 --- a/include/configs/exynos5-common.h +++ b/include/configs/exynos5-common.h @@ -47,17 +47,6 @@ #define CONFIG_SYS_CONSOLE_IS_IN_ENV #define CONFIG_CONSOLE_MUX -#define EXYNOS_DEVICE_SETTINGS \ - "stdin=serial\0" \ - "stdout=serial\0" \ - "stderr=serial\0" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - EXYNOS_DEVICE_SETTINGS - -#define CONFIG_CMD_PING -#define CONFIG_CMD_ELF -#define CONFIG_CMD_NET #define CONFIG_CMD_HASH /* Thermal Management Unit */ @@ -174,12 +163,6 @@ #define CONFIG_ENV_SROM_BANK 1 #endif /*CONFIG_CMD_NET*/ -/* Enable PXE Support */ -#ifdef CONFIG_CMD_NET -#define CONFIG_CMD_PXE -#define CONFIG_MENU -#endif - /* SHA hashing */ #define CONFIG_CMD_HASH #define CONFIG_HASH_VERIFY @@ -189,8 +172,6 @@ /* Enable Time Command */ #define CONFIG_CMD_TIME -#define CONFIG_CMD_BOOTZ - #define CONFIG_CMD_GPIO /* USB boot mode */ @@ -203,4 +184,41 @@ #define CONFIG_FIT #define CONFIG_FIT_BEST_MATCH + +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 1) \ + func(MMC, mmc, 0) \ + func(PXE, pxe, na) \ + func(DHCP, dhcp, na) + +#include <config_distro_bootcmd.h> + +#ifndef MEM_LAYOUT_ENV_SETTINGS +/* 2GB RAM, bootm size of 256M, load scripts after that */ +#define MEM_LAYOUT_ENV_SETTINGS \ + "bootm_size=0x10000000\0" \ + "kernel_addr_r=0x42000000\0" \ + "fdt_addr_r=0x43000000\0" \ + "ramdisk_addr_r=0x43300000\0" \ + "scriptaddr=0x50000000\0" \ + "pxefile_addr_r=0x51000000\0" +#endif + +#ifndef EXYNOS_DEVICE_SETTINGS +#define EXYNOS_DEVICE_SETTINGS \ + "stdin=serial\0" \ + "stdout=serial\0" \ + "stderr=serial\0" +#endif + +#ifndef EXYNOS_FDTFILE_SETTING +#define EXYNOS_FDTFILE_SETTING +#endif + +#define CONFIG_EXTRA_ENV_SETTINGS \ + EXYNOS_DEVICE_SETTINGS \ + EXYNOS_FDTFILE_SETTING \ + MEM_LAYOUT_ENV_SETTINGS \ + BOOTENV + #endif /* __CONFIG_EXYNOS5_COMMON_H */ diff --git a/include/configs/exynos5-dt-common.h b/include/configs/exynos5-dt-common.h index 66547fa34e..9cef0b0a38 100644 --- a/include/configs/exynos5-dt-common.h +++ b/include/configs/exynos5-dt-common.h @@ -9,6 +9,13 @@ #ifndef __CONFIG_EXYNOS5_DT_COMMON_H #define __CONFIG_EXYNOS5_DT_COMMON_H +/* Console configuration */ +#undef EXYNOS_DEVICE_SETTINGS +#define EXYNOS_DEVICE_SETTINGS \ + "stdin=serial,cros-ec-keyb\0" \ + "stdout=serial,lcd\0" \ + "stderr=serial,lcd\0" + #include "exynos5-common.h" /* PMIC */ @@ -22,14 +29,4 @@ #define CONFIG_CMD_CROS_EC #define CONFIG_KEYBOARD -/* Console configuration */ -#undef EXYNOS_DEVICE_SETTINGS -#define EXYNOS_DEVICE_SETTINGS \ - "stdin=serial,cros-ec-keyb\0" \ - "stdout=serial,lcd\0" \ - "stderr=serial,lcd\0" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - EXYNOS_DEVICE_SETTINGS - #endif diff --git a/include/configs/exynos5250-common.h b/include/configs/exynos5250-common.h index 713614f3ad..a0107e8b4d 100644 --- a/include/configs/exynos5250-common.h +++ b/include/configs/exynos5250-common.h @@ -29,8 +29,6 @@ #define CONFIG_SPL_TEXT_BASE 0x02023400 -#define CONFIG_BOOTCOMMAND "mmc read 40007000 451 2000; bootm 40007000" - #define CONFIG_IRAM_STACK 0x02050000 #define CONFIG_SYS_INIT_SP_ADDR CONFIG_IRAM_STACK diff --git a/include/configs/exynos5420-common.h b/include/configs/exynos5420-common.h index b0f940cd16..ef6e1551ab 100644 --- a/include/configs/exynos5420-common.h +++ b/include/configs/exynos5420-common.h @@ -10,6 +10,8 @@ #define __CONFIG_EXYNOS5420_H #define CONFIG_EXYNOS5420 +/* A variant of Exynos5420 (Exynos5 Family) */ +#define CONFIG_EXYNOS5800 #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_SPI_FLASH @@ -38,14 +40,13 @@ #define CONFIG_SPL_MAX_FOOTPRINT (30 * 1024) -#define CONFIG_DEVICE_TREE_LIST "exynos5420-peach-pit exynos5420-smdk5420" +#define CONFIG_DEVICE_TREE_LIST "exynos5800-peach-pi" \ + "exynos5420-peach-pit exynos5420-smdk5420" #define CONFIG_MAX_I2C_NUM 11 #define CONFIG_BOARD_REV_GPIO_COUNT 2 -#define CONFIG_BOOTCOMMAND "mmc read 20007000 451 2000; bootm 20007000" - #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 /* @@ -54,10 +55,6 @@ */ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_IRAM_TOP - 0x800) -/* DRAM Memory Banks */ -#define CONFIG_NR_DRAM_BANKS 7 -#define SDRAM_BANK_SIZE (512UL << 20UL) /* 512 MB */ - /* Miscellaneous configurable options */ #define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0" diff --git a/include/configs/flea3.h b/include/configs/flea3.h index 84175676c2..bf02829cde 100644 --- a/include/configs/flea3.h +++ b/include/configs/flea3.h @@ -16,7 +16,6 @@ #include <asm/arch/imx-regs.h> /* High Level Configuration Options */ -#define CONFIG_ARM1136 /* This is an arm1136 CPU core */ #define CONFIG_MX35 #define CONFIG_SYS_DCACHE_OFF diff --git a/include/configs/hawkboard.h b/include/configs/hawkboard.h index 8188c7b788..1d78e725e3 100644 --- a/include/configs/hawkboard.h +++ b/include/configs/hawkboard.h @@ -20,7 +20,6 @@ * SoC Configuration */ #define CONFIG_MACH_DAVINCI_HAWK -#define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ #define CONFIG_SOC_DA850 /* TI DA850 SoC */ #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH diff --git a/include/configs/hrcon.h b/include/configs/hrcon.h new file mode 100644 index 0000000000..e7df9ad92a --- /dev/null +++ b/include/configs/hrcon.h @@ -0,0 +1,614 @@ +/* + * (C) Copyright 2014 + * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_E300 1 /* E300 family */ +#define CONFIG_MPC83xx 1 /* MPC83xx family */ +#define CONFIG_MPC830x 1 /* MPC830x family */ +#define CONFIG_MPC8308 1 /* MPC8308 CPU specific */ +#define CONFIG_HRCON 1 /* HRCON board specific */ + +#define CONFIG_SYS_TEXT_BASE 0xFE000000 + +#define CONFIG_IDENT_STRING " hrcon 0.01" + +#define CONFIG_SYS_GENERIC_BOARD + +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_EARLY_INIT_R +#define CONFIG_LAST_STAGE_INIT + +/* new uImage format support */ +#define CONFIG_FIT 1 +#define CONFIG_FIT_VERBOSE 1 + +#define CONFIG_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC83xx_ESDHC_ADDR +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 + +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT2 + +#define CONFIG_CMD_FPGAD +#define CONFIG_CMD_IOLOOP + +/* + * System Clock Setup + */ +#define CONFIG_83XX_CLKIN 33333333 /* in Hz */ +#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN + +/* + * Hardware Reset Configuration Word + * if CLKIN is 66.66MHz, then + * CSB = 133MHz, DDRC = 266MHz, LBC = 133MHz + * We choose the A type silicon as default, so the core is 400Mhz. + */ +#define CONFIG_SYS_HRCW_LOW (\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_2X1 |\ + HRCWL_SVCOD_DIV_2 |\ + HRCWL_CSB_TO_CLKIN_4X1 |\ + HRCWL_CORE_TO_CSB_3X1) +/* + * There are neither HRCWH_PCI_HOST nor HRCWH_PCI1_ARBITER_ENABLE bits + * in 8308's HRCWH according to the manual, but original Freescale's + * code has them and I've expirienced some problems using the board + * with BDI3000 attached when I've tried to set these bits to zero + * (UART doesn't work after the 'reset run' command). + */ +#define CONFIG_SYS_HRCW_HIGH (\ + HRCWH_PCI_HOST |\ + HRCWH_PCI1_ARBITER_ENABLE |\ + HRCWH_CORE_ENABLE |\ + HRCWH_FROM_0XFFF00100 |\ + HRCWH_BOOTSEQ_DISABLE |\ + HRCWH_SW_WATCHDOG_DISABLE |\ + HRCWH_ROM_LOC_LOCAL_16BIT |\ + HRCWH_RL_EXT_LEGACY |\ + HRCWH_TSEC1M_IN_RGMII |\ + HRCWH_TSEC2M_IN_RGMII |\ + HRCWH_BIG_ENDIAN) + +/* + * System IO Config + */ +#define CONFIG_SYS_SICRH (\ + SICRH_ESDHC_A_SD |\ + SICRH_ESDHC_B_SD |\ + SICRH_ESDHC_C_SD |\ + SICRH_GPIO_A_GPIO |\ + SICRH_GPIO_B_GPIO |\ + SICRH_IEEE1588_A_GPIO |\ + SICRH_USB |\ + SICRH_GTM_GPIO |\ + SICRH_IEEE1588_B_GPIO |\ + SICRH_ETSEC2_GPIO |\ + SICRH_GPIOSEL_1 |\ + SICRH_TMROBI_V3P3 |\ + SICRH_TSOBI1_V2P5 |\ + SICRH_TSOBI2_V2P5) /* 0x0037f103 */ +#define CONFIG_SYS_SICRL (\ + SICRL_SPI_PF0 |\ + SICRL_UART_PF0 |\ + SICRL_IRQ_PF0 |\ + SICRL_I2C2_PF0 |\ + SICRL_ETSEC1_GTX_CLK125) /* 0x00000000 */ + +/* + * IMMR new address + */ +#define CONFIG_SYS_IMMR 0xE0000000 + +/* + * SERDES + */ +#define CONFIG_FSL_SERDES +#define CONFIG_FSL_SERDES1 0xe3000 + +/* + * Arbiter Setup + */ +#define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth is 4 */ +#define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count is 4 */ +#define CONFIG_SYS_SPCR_TSECEP 3 /* eTSEC emergency priority is highest */ + +/* + * DDR Setup + */ +#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory */ +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE +#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE +#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 +#define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN \ + | DDRCDR_PZ_LOZ \ + | DDRCDR_NZ_LOZ \ + | DDRCDR_ODT \ + | DDRCDR_Q_DRN) + /* 0x7b880001 */ +/* + * Manually set up DDR parameters + * consist of one chip NT5TU64M16HG from NANYA + */ + +#define CONFIG_SYS_DDR_SIZE 128 /* MB */ + +#define CONFIG_SYS_DDR_CS0_BNDS 0x00000007 +#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN \ + | CSCONFIG_ODT_RD_NEVER \ + | CSCONFIG_ODT_WR_ONLY_CURRENT \ + | CSCONFIG_BANK_BIT_3 \ + | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10) + /* 0x80010102 */ +#define CONFIG_SYS_DDR_TIMING_3 0 +#define CONFIG_SYS_DDR_TIMING_0 ((0 << TIMING_CFG0_RWT_SHIFT) \ + | (0 << TIMING_CFG0_WRT_SHIFT) \ + | (0 << TIMING_CFG0_RRT_SHIFT) \ + | (0 << TIMING_CFG0_WWT_SHIFT) \ + | (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \ + | (6 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \ + | (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \ + | (2 << TIMING_CFG0_MRS_CYC_SHIFT)) + /* 0x00260802 */ +#define CONFIG_SYS_DDR_TIMING_1 ((2 << TIMING_CFG1_PRETOACT_SHIFT) \ + | (6 << TIMING_CFG1_ACTTOPRE_SHIFT) \ + | (2 << TIMING_CFG1_ACTTORW_SHIFT) \ + | (7 << TIMING_CFG1_CASLAT_SHIFT) \ + | (9 << TIMING_CFG1_REFREC_SHIFT) \ + | (2 << TIMING_CFG1_WRREC_SHIFT) \ + | (2 << TIMING_CFG1_ACTTOACT_SHIFT) \ + | (2 << TIMING_CFG1_WRTORD_SHIFT)) + /* 0x26279222 */ +#define CONFIG_SYS_DDR_TIMING_2 ((0 << TIMING_CFG2_ADD_LAT_SHIFT) \ + | (4 << TIMING_CFG2_CPO_SHIFT) \ + | (3 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \ + | (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) \ + | (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \ + | (3 << TIMING_CFG2_CKE_PLS_SHIFT) \ + | (5 << TIMING_CFG2_FOUR_ACT_SHIFT)) + /* 0x021848c5 */ +#define CONFIG_SYS_DDR_INTERVAL ((0x0824 << SDRAM_INTERVAL_REFINT_SHIFT) \ + | (0x0100 << SDRAM_INTERVAL_BSTOPRE_SHIFT)) + /* 0x08240100 */ +#define CONFIG_SYS_DDR_SDRAM_CFG (SDRAM_CFG_SREN \ + | SDRAM_CFG_SDRAM_TYPE_DDR2 \ + | SDRAM_CFG_DBW_16) + /* 0x43100000 */ + +#define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000 /* 1 posted refresh */ +#define CONFIG_SYS_DDR_MODE ((0x0440 << SDRAM_MODE_ESD_SHIFT) \ + | (0x0242 << SDRAM_MODE_SD_SHIFT)) + /* ODT 150ohm CL=4, AL=0 on SDRAM */ +#define CONFIG_SYS_DDR_MODE2 0x00000000 + +/* + * Memory test + */ +#define CONFIG_SYS_MEMTEST_START 0x00001000 /* memtest region */ +#define CONFIG_SYS_MEMTEST_END 0x07f00000 + +/* + * The reserved memory + */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ + +#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */ +#define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */ + +/* + * Initial RAM Base Address Setup + */ +#define CONFIG_SYS_INIT_RAM_LOCK 1 +#define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */ +#define CONFIG_SYS_GBL_DATA_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) + +/* + * Local Bus Configuration & Clock Setup + */ +#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP +#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2 +#define CONFIG_SYS_LBC_LBCR 0x00040000 + +/* + * FLASH on the Local Bus + */ +#if 1 +#define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */ +#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ +#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT +#define CONFIG_FLASH_CFI_LEGACY +#define CONFIG_SYS_FLASH_LEGACY_512Kx16 +#else +#define CONFIG_SYS_NO_FLASH +#endif + +#define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */ +#define CONFIG_SYS_FLASH_SIZE 8 /* FLASH size is up to 8M */ +#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use h/w Flash protection. */ + +/* Window base at flash base */ +#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_8MB) + +#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ + | BR_PS_16 /* 16 bit port */ \ + | BR_MS_GPCM /* MSEL = GPCM */ \ + | BR_V) /* valid */ +#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ + | OR_UPM_XAM \ + | OR_GPCM_CSNT \ + | OR_GPCM_ACS_DIV2 \ + | OR_GPCM_XACS \ + | OR_GPCM_SCY_15 \ + | OR_GPCM_TRLX_SET \ + | OR_GPCM_EHTR_SET) + +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 135 + +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +/* + * FPGA + */ +#define CONFIG_SYS_FPGA0_BASE 0xE0600000 +#define CONFIG_SYS_FPGA0_SIZE 1 /* FPGA size is 1M */ + +/* Window base at FPGA base */ +#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_FPGA0_BASE +#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_1MB) + +#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_FPGA0_BASE \ + | BR_PS_16 /* 16 bit port */ \ + | BR_MS_GPCM /* MSEL = GPCM */ \ + | BR_V) /* valid */ +#define CONFIG_SYS_OR1_PRELIM (MEG_TO_AM(CONFIG_SYS_FPGA0_SIZE) \ + | OR_UPM_XAM \ + | OR_GPCM_CSNT \ + | OR_GPCM_ACS_DIV2 \ + | OR_GPCM_XACS \ + | OR_GPCM_SCY_15 \ + | OR_GPCM_TRLX_SET \ + | OR_GPCM_EHTR_SET) + +#define CONFIG_SYS_FPGA_BASE(k) CONFIG_SYS_FPGA0_BASE +#define CONFIG_SYS_FPGA_DONE(k) 0x0010 + +#define CONFIG_SYS_FPGA_COUNT 1 + +#define CONFIG_SYS_MCLINK_MAX 3 + +#define CONFIG_SYS_FPGA_PTR \ + { (struct ihs_fpga *)CONFIG_SYS_FPGA0_BASE, NULL, NULL, NULL } + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 2 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) + +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600) + +/* Use the HUSH parser */ +#define CONFIG_SYS_HUSH_PARSER + +/* Pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 +#define CONFIG_OF_STDOUT_VIA_ALIAS 1 + +/* I2C */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_FSL +#define CONFIG_SYS_FSL_I2C_SPEED 400000 +#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 + +#define CONFIG_PCA953X /* NXP PCA9554 */ +#define CONFIG_PCA9698 /* NXP PCA9698 */ + +#define CONFIG_SYS_I2C_IHS +#define CONFIG_SYS_I2C_IHS_CH0 +#define CONFIG_SYS_I2C_IHS_SPEED_0 50000 +#define CONFIG_SYS_I2C_IHS_SLAVE_0 0x7F +#define CONFIG_SYS_I2C_IHS_CH1 +#define CONFIG_SYS_I2C_IHS_SPEED_1 50000 +#define CONFIG_SYS_I2C_IHS_SLAVE_1 0x7F +#define CONFIG_SYS_I2C_IHS_CH2 +#define CONFIG_SYS_I2C_IHS_SPEED_2 50000 +#define CONFIG_SYS_I2C_IHS_SLAVE_2 0x7F +#define CONFIG_SYS_I2C_IHS_CH3 +#define CONFIG_SYS_I2C_IHS_SPEED_3 50000 +#define CONFIG_SYS_I2C_IHS_SLAVE_3 0x7F + +/* + * Software (bit-bang) I2C driver configuration + */ +#define CONFIG_SYS_I2C_SOFT +#define CONFIG_SYS_I2C_SOFT_SPEED 50000 +#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F +#define I2C_SOFT_DECLARATIONS2 +#define CONFIG_SYS_I2C_SOFT_SPEED_2 50000 +#define CONFIG_SYS_I2C_SOFT_SLAVE_2 0x7F +#define I2C_SOFT_DECLARATIONS3 +#define CONFIG_SYS_I2C_SOFT_SPEED_3 50000 +#define CONFIG_SYS_I2C_SOFT_SLAVE_3 0x7F +#define I2C_SOFT_DECLARATIONS4 +#define CONFIG_SYS_I2C_SOFT_SPEED_4 50000 +#define CONFIG_SYS_I2C_SOFT_SLAVE_4 0x7F + +#define CONFIG_SYS_ICS8N3QV01_I2C {5, 6, 7, 8} +#define CONFIG_SYS_CH7301_I2C {5, 6, 7, 8} +#define CONFIG_SYS_DP501_I2C {1, 2, 3, 4} + +#ifndef __ASSEMBLY__ +void fpga_gpio_set(unsigned int bus, int pin); +void fpga_gpio_clear(unsigned int bus, int pin); +int fpga_gpio_get(unsigned int bus, int pin); +#endif + +#define I2C_ACTIVE { } +#define I2C_TRISTATE { } +#define I2C_READ \ + (fpga_gpio_get(I2C_ADAP_HWNR, 0x0040) ? 1 : 0) +#define I2C_SDA(bit) \ + do { \ + if (bit) \ + fpga_gpio_set(I2C_ADAP_HWNR, 0x0040); \ + else \ + fpga_gpio_clear(I2C_ADAP_HWNR, 0x0040); \ + } while (0) +#define I2C_SCL(bit) \ + do { \ + if (bit) \ + fpga_gpio_set(I2C_ADAP_HWNR, 0x0020); \ + else \ + fpga_gpio_clear(I2C_ADAP_HWNR, 0x0020); \ + } while (0) +#define I2C_DELAY udelay(25) /* 1/4 I2C clock duration */ + +/* + * Software (bit-bang) MII driver configuration + */ +#define CONFIG_BITBANGMII /* bit-bang MII PHY management */ +#define CONFIG_BITBANGMII_MULTI + +/* + * OSD Setup + */ +#define CONFIG_SYS_OSD_SCREENS 1 +#define CONFIG_SYS_DP501_DIFFERENTIAL +#define CONFIG_SYS_DP501_VCAPCTRL0 0x01 /* DDR mode 0, DE for H/VSYNC */ + +/* + * General PCI + * Addresses are mapped 1-1. + */ +#define CONFIG_SYS_PCIE1_BASE 0xA0000000 +#define CONFIG_SYS_PCIE1_MEM_BASE 0xA0000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0xA0000000 +#define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 +#define CONFIG_SYS_PCIE1_CFG_BASE 0xB0000000 +#define CONFIG_SYS_PCIE1_CFG_SIZE 0x01000000 +#define CONFIG_SYS_PCIE1_IO_BASE 0x00000000 +#define CONFIG_SYS_PCIE1_IO_PHYS 0xB1000000 +#define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 + +/* enable PCIE clock */ +#define CONFIG_SYS_SCCR_PCIEXP1CM 1 + +#define CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE +#define CONFIG_PCIE + +#define CONFIG_PCI_PNP /* do pci plug-and-play */ + +#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */ +#define CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES 1 + +/* + * TSEC + */ +#define CONFIG_TSEC_ENET /* TSEC ethernet support */ +#define CONFIG_SYS_TSEC1_OFFSET 0x24000 +#define CONFIG_SYS_TSEC1 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET) + +/* + * TSEC ethernet configuration + */ +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_TSEC1 +#define CONFIG_TSEC1_NAME "eTSEC0" +#define TSEC1_PHY_ADDR 1 +#define TSEC1_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT + +/* Options are: eTSEC[0-1] */ +#define CONFIG_ETHPRIME "eTSEC0" + +/* + * Environment + */ +#if 1 +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \ + CONFIG_SYS_MONITOR_LEN) +#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K(one sector) for env */ +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE +#else +#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ +#endif + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ + +#undef CONFIG_ZERO_BOOTDELAY_CHECK /* ignore keypress on bootdelay==0 */ +#define CONFIG_AUTOBOOT_KEYED /* use key strings to stop autoboot */ +#define CONFIG_AUTOBOOT_STOP_STR " " + +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ + +#define CONFIG_SYS_CONSOLE_INFO_QUIET + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +/* + * For booting Linux, the board info and command line data + * have to be in the first 256 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux */ + +/* + * Core HID Setup + */ +#define CONFIG_SYS_HID0_INIT 0x000000000 +#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ + HID0_ENABLE_INSTRUCTION_CACHE | \ + HID0_ENABLE_DYNAMIC_POWER_MANAGMENT) +#define CONFIG_SYS_HID2 HID2_HBE + +/* + * MMU Setup + */ + +/* DDR: cache cacheable */ +#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | \ + BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_128M | \ + BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L +#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U + +/* IMMRBAR, PCI IO and FPGA: cache-inhibit and guarded */ +#define CONFIG_SYS_IBAT1L (CONFIG_SYS_IMMR | BATL_PP_RW | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_IBAT1U (CONFIG_SYS_IMMR | BATU_BL_8M | BATU_VS | \ + BATU_VP) +#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L +#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U + +/* FLASH: icache cacheable, but dcache-inhibit and guarded */ +#define CONFIG_SYS_IBAT2L (CONFIG_SYS_FLASH_BASE | BATL_PP_RW | \ + BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT2U (CONFIG_SYS_FLASH_BASE | BATU_BL_8M | \ + BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT2L (CONFIG_SYS_FLASH_BASE | BATL_PP_RW | \ + BATL_CACHEINHIBIT | \ + BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U + +/* Stack in dcache: cacheable, no memory coherence */ +#define CONFIG_SYS_IBAT3L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW) +#define CONFIG_SYS_IBAT3U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | \ + BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L +#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U + +/* + * Environment Configuration + */ + +#define CONFIG_ENV_OVERWRITE + +#if defined(CONFIG_TSEC_ENET) +#define CONFIG_HAS_ETH0 +#endif + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ + +#define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */ + +#define CONFIG_HOSTNAME hrcon +#define CONFIG_ROOTPATH "/opt/nfsroot" +#define CONFIG_BOOTFILE "uImage" + +#define CONFIG_PREBOOT /* enable preboot variable */ + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "consoledev=ttyS1\0" \ + "u-boot=u-boot.bin\0" \ + "kernel_addr=1000000\0" \ + "fdt_addr=C00000\0" \ + "fdtfile=hrcon.dtb\0" \ + "load=tftp ${loadaddr} ${u-boot}\0" \ + "update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE) \ + " +${filesize};era " __stringify(CONFIG_SYS_MONITOR_BASE)\ + " +${filesize};cp.b ${fileaddr} " \ + __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \ + "upd=run load update\0" \ + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp ${kernel_addr} $bootfile;" \ + "tftp ${fdt_addr} $fdtfile;" \ + "bootm ${kernel_addr} - ${fdt_addr}" + +#define CONFIG_MMCBOOTCOMMAND \ + "setenv bootargs root=/dev/mmcblk0p3 rw rootwait " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "ext2load mmc 0:2 ${kernel_addr} $bootfile;" \ + "ext2load mmc 0:2 ${fdt_addr} $fdtfile;" \ + "bootm ${kernel_addr} - ${fdt_addr}" + +#define CONFIG_BOOTCOMMAND CONFIG_MMCBOOTCOMMAND + + +#endif /* __CONFIG_H */ diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h index 3e55247465..f08483487d 100644 --- a/include/configs/ids8313.h +++ b/include/configs/ids8313.h @@ -484,7 +484,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_PROMPT "=> " #define CONFIG_SYS_CBSIZE 1024 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ + sizeof(CONFIG_SYS_PROMPT)+16) diff --git a/include/configs/imx27lite-common.h b/include/configs/imx27lite-common.h index 9c25efe851..386dbd8895 100644 --- a/include/configs/imx27lite-common.h +++ b/include/configs/imx27lite-common.h @@ -13,7 +13,6 @@ /* * SoC Configuration */ -#define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_MX27 #define CONFIG_MX27_CLK32 32768 /* OSC32K frequency */ diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h index 8428d84496..0f22032545 100644 --- a/include/configs/imx31_litekit.h +++ b/include/configs/imx31_litekit.h @@ -15,8 +15,7 @@ #include <asm/arch/imx-regs.h> /* High Level Configuration Options */ -#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ -#define CONFIG_MX31 1 /* in a mx31 */ +#define CONFIG_MX31 1 /* This is a mx31 */ #define CONFIG_MX31_CLK32 32000 #define CONFIG_DISPLAY_CPUINFO diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h index ffb67c2ebe..4195fa3533 100644 --- a/include/configs/imx31_phycore.h +++ b/include/configs/imx31_phycore.h @@ -15,8 +15,7 @@ #include <asm/arch/imx-regs.h> /* High Level Configuration Options */ -#define CONFIG_ARM1136 /* This is an arm1136 CPU core */ -#define CONFIG_MX31 /* in a mx31 */ +#define CONFIG_MX31 /* This is a mx31 */ #define CONFIG_MX31_CLK32 32000 #define CONFIG_DISPLAY_CPUINFO diff --git a/include/configs/ipam390.h b/include/configs/ipam390.h index 98e819bb18..310d5e2106 100644 --- a/include/configs/ipam390.h +++ b/include/configs/ipam390.h @@ -25,7 +25,6 @@ * SoC Configuration */ #define CONFIG_MACH_DAVINCI_DA850_EVM -#define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ #define CONFIG_SOC_DA850 /* TI DA850 SoC */ #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH diff --git a/include/configs/jadecpu.h b/include/configs/jadecpu.h index 759e1129c2..8175621338 100644 --- a/include/configs/jadecpu.h +++ b/include/configs/jadecpu.h @@ -14,7 +14,6 @@ #define CONFIG_MB86R0x_IOCLK get_bus_freq(0) #define CONFIG_SYS_TEXT_BASE 0x10000000 -#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ #define CONFIG_USE_ARCH_MEMCPY #define CONFIG_USE_ARCH_MEMSET diff --git a/include/configs/ks2_evm.h b/include/configs/ks2_evm.h index dd5050fbe9..42280ca0a5 100644 --- a/include/configs/ks2_evm.h +++ b/include/configs/ks2_evm.h @@ -20,7 +20,6 @@ #define CONFIG_SYS_THUMB_BUILD /* SoC Configuration */ -#define CONFIG_ARMV7 #define CONFIG_ARCH_CPU_INIT #define CONFIG_SYS_ARCH_TIMER #define CONFIG_SYS_TEXT_BASE 0x0c001000 diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index bb9fbedea5..48e10ec8c4 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -369,7 +369,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_PROMPT "=> " #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE \ diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index a5d29763c9..3eac7eea01 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -261,7 +261,6 @@ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_PROMPT "=> " #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE \ diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h index 51b1a141eb..0f4bd91c64 100644 --- a/include/configs/mx31ads.h +++ b/include/configs/mx31ads.h @@ -12,8 +12,7 @@ #include <asm/arch/imx-regs.h> /* High Level Configuration Options */ -#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ -#define CONFIG_MX31 1 /* in a mx31 */ +#define CONFIG_MX31 1 /* This is a mx31 */ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h index bc4583baee..2a3e53c792 100644 --- a/include/configs/mx31pdk.h +++ b/include/configs/mx31pdk.h @@ -17,8 +17,7 @@ #include <asm/arch/imx-regs.h> /* High Level Configuration Options */ -#define CONFIG_ARM1136 /* This is an arm1136 CPU core */ -#define CONFIG_MX31 /* in a mx31 */ +#define CONFIG_MX31 /* This is a mx31 */ #define CONFIG_SYS_GENERIC_BOARD diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h index ab481441b2..a145f0812f 100644 --- a/include/configs/mx35pdk.h +++ b/include/configs/mx35pdk.h @@ -16,7 +16,6 @@ #include <asm/arch/imx-regs.h> /* High Level Configuration Options */ -#define CONFIG_ARM1136 /* This is an arm1136 CPU core */ #define CONFIG_MX35 #define CONFIG_DISPLAY_CPUINFO diff --git a/include/configs/mx6qsabreauto.h b/include/configs/mx6qsabreauto.h index 3f1c88e239..51042ca72e 100644 --- a/include/configs/mx6qsabreauto.h +++ b/include/configs/mx6qsabreauto.h @@ -37,6 +37,16 @@ #include "mx6sabre_common.h" +#undef CONFIG_SYS_NO_FLASH +#define CONFIG_SYS_FLASH_BASE WEIM_ARB_BASE_ADDR +#define CONFIG_SYS_FLASH_SECT_SIZE (128 * 1024) +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ +#define CONFIG_SYS_FLASH_CFI /* Flash memory is CFI compliant */ +#define CONFIG_FLASH_CFI_DRIVER /* Use drivers/cfi_flash.c */ +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* Use buffered writes*/ +#define CONFIG_SYS_FLASH_EMPTY_INFO + #define CONFIG_SYS_FSL_USDHC_NUM 2 #if defined(CONFIG_ENV_IS_IN_MMC) #define CONFIG_SYS_MMC_ENV_DEV 0 @@ -64,4 +74,10 @@ #define CONFIG_APBH_DMA_BURST #define CONFIG_APBH_DMA_BURST8 +/* PMIC */ +#define CONFIG_POWER +#define CONFIG_POWER_I2C +#define CONFIG_POWER_PFUZE100 +#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 + #endif /* __MX6QSABREAUTO_CONFIG_H */ diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h index 1e104229f9..9fdd8410a4 100644 --- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -25,6 +25,11 @@ #define CONFIG_INITRD_TAG #define CONFIG_REVISION_TAG +#define CONFIG_DM +#define CONFIG_DM_THERMAL +#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) +#define CONFIG_IMX6_THERMAL + #define CONFIG_SYS_GENERIC_BOARD /* Size of malloc() pool */ @@ -37,7 +42,7 @@ #define CONFIG_MXC_UART #define CONFIG_CMD_FUSE -#ifdef CONFIG_CMD_FUSE +#if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL) #define CONFIG_MXC_OCOTP #endif diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h index 4fcaf515c7..271548c875 100644 --- a/include/configs/mx6slevk.h +++ b/include/configs/mx6slevk.h @@ -87,7 +87,7 @@ "fdt_addr=0x88000000\0" \ "boot_fdt=try\0" \ "ip_dyn=yes\0" \ - "mmcdev=0\0" \ + "mmcdev=1\0" \ "mmcpart=1\0" \ "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h index e02ea18a64..d8ab2917ea 100644 --- a/include/configs/mx6sxsabresd.h +++ b/include/configs/mx6sxsabresd.h @@ -59,7 +59,7 @@ "fdt_addr=0x88000000\0" \ "boot_fdt=try\0" \ "ip_dyn=yes\0" \ - "mmcdev=0\0" \ + "mmcdev=2\0" \ "mmcpart=1\0" \ "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ @@ -214,7 +214,6 @@ #define CONFIG_ENV_OFFSET (6 * SZ_64K) #define CONFIG_ENV_SIZE SZ_8K #define CONFIG_ENV_IS_IN_MMC -#define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_OF_LIBFDT #define CONFIG_CMD_BOOTZ @@ -223,4 +222,9 @@ #define CONFIG_CMD_CACHE #endif +#define CONFIG_SYS_FSL_USDHC_NUM 3 +#if defined(CONFIG_ENV_IS_IN_MMC) +#define CONFIG_SYS_MMC_ENV_DEV 2 /*USDHC4*/ +#endif + #endif /* __CONFIG_H */ diff --git a/include/configs/nhk8815.h b/include/configs/nhk8815.h index 5419f551d3..52cde4110c 100644 --- a/include/configs/nhk8815.h +++ b/include/configs/nhk8815.h @@ -12,7 +12,6 @@ #include <nomadik.h> -#define CONFIG_ARM926EJS #define CONFIG_NOMADIK_8815 /* cpu variant */ #define CONFIG_SKIP_LOWLEVEL_INIT /* we have already been loaded to RAM */ diff --git a/include/configs/odroid.h b/include/configs/odroid.h index b928af839e..807e96bbaa 100644 --- a/include/configs/odroid.h +++ b/include/configs/odroid.h @@ -198,6 +198,19 @@ #define CONFIG_CMD_GPIO +/* USB */ +#define CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_EXYNOS +#define CONFIG_USB_STORAGE + +#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_SMSC95XX + /* * Supported Odroid boards: X3, U3 * TODO: Add Odroid X support diff --git a/include/configs/omap3_mvblx.h b/include/configs/omap3_mvblx.h index f3c21c4580..bf1d34dedb 100644 --- a/include/configs/omap3_mvblx.h +++ b/include/configs/omap3_mvblx.h @@ -18,7 +18,6 @@ /* * High Level Configuration Options */ -#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */ #define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_MVBLX 1 /* working with mvBlueLYNX-X */ #define CONFIG_MACH_TYPE MACH_TYPE_MVBLX diff --git a/include/configs/origen.h b/include/configs/origen.h index da9d6a1ee1..8f1e25696e 100644 --- a/include/configs/origen.h +++ b/include/configs/origen.h @@ -56,6 +56,10 @@ #undef CONFIG_CMD_PING #define CONFIG_CMD_ELF #define CONFIG_CMD_DHCP +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FS_GENERIC +#define CONFIG_CMD_BOOTZ +#define CONFIG_SUPPORT_RAW_INITRD #undef CONFIG_CMD_NET #undef CONFIG_CMD_NFS @@ -63,7 +67,36 @@ #define COPY_BL2_FNPTR_ADDR 0x02020030 #define CONFIG_SPL_TEXT_BASE 0x02021410 -#define CONFIG_BOOTCOMMAND "fatload mmc 0 40007000 uImage; bootm 40007000" +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loadaddr=0x40007000\0" \ + "rdaddr=0x48000000\0" \ + "kerneladdr=0x40007000\0" \ + "ramdiskaddr=0x48000000\0" \ + "console=ttySAC2,115200n8\0" \ + "mmcdev=0\0" \ + "bootenv=uEnv.txt\0" \ + "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ + "importbootenv=echo Importing environment from mmc ...; " \ + "env import -t $loadaddr $filesize\0" \ + "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \ + "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \ + "source ${loadaddr}\0" +#define CONFIG_BOOTCOMMAND \ + "if mmc rescan; then " \ + "echo SD/MMC found on device ${mmcdev};" \ + "if run loadbootenv; then " \ + "echo Loaded environment from ${bootenv};" \ + "run importbootenv;" \ + "fi;" \ + "if test -n $uenvcmd; then " \ + "echo Running uenvcmd ...;" \ + "run uenvcmd;" \ + "fi;" \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "fi; " \ + "fi;" \ + "load mmc ${mmcdev} ${loadaddr} uImage; bootm ${loadaddr} " #define CONFIG_IDENT_STRING " for ORIGEN" diff --git a/include/configs/peach-pi.h b/include/configs/peach-pi.h new file mode 100644 index 0000000000..8a82402ec1 --- /dev/null +++ b/include/configs/peach-pi.h @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2014 Samsung Electronics + * + * Configuration settings for the SAMSUNG/GOOGLE PEACH-PI board. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_PEACH_PI_H +#define __CONFIG_PEACH_PI_H + +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_SPI_FLASH +#define CONFIG_ENV_SPI_BASE 0x12D30000 +#define FLASH_SIZE (0x4 << 20) +#define CONFIG_ENV_OFFSET (FLASH_SIZE - CONFIG_BL2_SIZE) + +#include <configs/exynos5420-common.h> +#include <configs/exynos5-dt-common.h> + +#define CONFIG_BOARD_COMMON + +/* select serial console configuration */ +#define CONFIG_SERIAL3 /* use SERIAL 3 */ + +#define CONFIG_SYS_PROMPT "Peach-Pi # " +#define CONFIG_IDENT_STRING " for Peach-Pi" + +#define CONFIG_VIDEO_PARADE + +/* Display */ +#define CONFIG_LCD +#ifdef CONFIG_LCD +#define CONFIG_EXYNOS_FB +#define CONFIG_EXYNOS_DP +#define LCD_BPP LCD_COLOR16 +#endif + +#define CONFIG_POWER_TPS65090_EC +#define CONFIG_CROS_EC_SPI /* Support CROS_EC over SPI */ +#define CONFIG_DM_CROS_EC + +#define CONFIG_USB_XHCI +#define CONFIG_USB_XHCI_EXYNOS + +/* DRAM Memory Banks */ +#define CONFIG_NR_DRAM_BANKS 7 +#define SDRAM_BANK_SIZE (512UL << 20UL) /* 512 MB */ + +#endif /* __CONFIG_PEACH_PI_H */ diff --git a/include/configs/peach-pit.h b/include/configs/peach-pit.h index 91bd37d6bc..ad5db57f5f 100644 --- a/include/configs/peach-pit.h +++ b/include/configs/peach-pit.h @@ -23,8 +23,8 @@ /* select serial console configuration */ #define CONFIG_SERIAL3 /* use SERIAL 3 */ -#define CONFIG_SYS_PROMPT "Peach # " -#define CONFIG_IDENT_STRING " for Peach" +#define CONFIG_SYS_PROMPT "Peach-Pit # " +#define CONFIG_IDENT_STRING " for Peach-Pit" #define CONFIG_VIDEO_PARADE @@ -43,4 +43,8 @@ #define CONFIG_USB_XHCI #define CONFIG_USB_XHCI_EXYNOS +/* DRAM Memory Banks */ +#define CONFIG_NR_DRAM_BANKS 4 +#define SDRAM_BANK_SIZE (512UL << 20UL) /* 512 MB */ + #endif /* __CONFIG_PEACH_PIT_H */ diff --git a/include/configs/pr1.h b/include/configs/pr1.h index 0f57e868a5..13fb675a5f 100644 --- a/include/configs/pr1.h +++ b/include/configs/pr1.h @@ -102,8 +102,8 @@ /* * I2C Settings */ -#define CONFIG_BFIN_TWI_I2C -#define CONFIG_HARD_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_ADI /* diff --git a/include/configs/qong.h b/include/configs/qong.h index f9d6642cc4..d383fe878f 100644 --- a/include/configs/qong.h +++ b/include/configs/qong.h @@ -12,8 +12,7 @@ #include <asm/arch/imx-regs.h> /* High Level Configuration Options */ -#define CONFIG_ARM1136 /* This is an arm1136 CPU core */ -#define CONFIG_MX31 /* in a mx31 */ +#define CONFIG_MX31 /* This is a mx31 */ #define CONFIG_QONG #define CONFIG_DISPLAY_CPUINFO diff --git a/include/configs/rpi_b.h b/include/configs/rpi_b.h index ca27f9ad78..41e975fbcc 100644 --- a/include/configs/rpi_b.h +++ b/include/configs/rpi_b.h @@ -21,7 +21,6 @@ /* Architecture, CPU, etc.*/ #define CONFIG_SYS_GENERIC_BOARD -#define CONFIG_ARM1176 #define CONFIG_BCM2835 #define CONFIG_ARCH_CPU_INIT #define CONFIG_SYS_DCACHE_OFF diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index ee4b24473c..2b03841d9d 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -48,6 +48,7 @@ #define CONFIG_ANDROID_BOOT_IMAGE #define CONFIG_FS_FAT +#define CONFIG_FAT_WRITE #define CONFIG_FS_EXT4 #define CONFIG_EXT4_WRITE #define CONFIG_CMD_FAT @@ -57,6 +58,7 @@ #define CONFIG_DOS_PARTITION #define CONFIG_HOST_MAX_DEVICES 4 #define CONFIG_CMD_FS_GENERIC +#define CONFIG_CMD_MD5SUM #define CONFIG_SYS_VSNPRINTF diff --git a/include/configs/scb9328.h b/include/configs/scb9328.h index e6d272dd1f..f4a40bb932 100644 --- a/include/configs/scb9328.h +++ b/include/configs/scb9328.h @@ -10,8 +10,7 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_ARM920T 1 /* this is an ARM920T CPU */ -#define CONFIG_IMX 1 /* in a Motorola MC9328MXL Chip */ +#define CONFIG_IMX 1 /* This is a Motorola MC9328MXL Chip */ #define CONFIG_SCB9328 1 /* on a scb9328tronix board */ #define CONFIG_IMX_SERIAL diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h index d4ae19f96c..71eb81c2f7 100644 --- a/include/configs/smdk2410.h +++ b/include/configs/smdk2410.h @@ -17,13 +17,14 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_ARM920T /* This is an ARM920T Core */ -#define CONFIG_S3C24X0 /* in a SAMSUNG S3C24x0-type SoC */ +#define CONFIG_S3C24X0 /* This is a SAMSUNG S3C24x0-type SoC */ #define CONFIG_S3C2410 /* specifically a SAMSUNG S3C2410 SoC */ #define CONFIG_SMDK2410 /* on a SAMSUNG SMDK2410 Board */ #define CONFIG_SYS_TEXT_BASE 0x0 +#define CONFIG_SYS_GENERIC_BOARD + #define CONFIG_SYS_ARM_CACHE_WRITETHROUGH /* input clock of PLL (the SMDK2410 has 12MHz input clock) */ diff --git a/include/configs/smdk5420.h b/include/configs/smdk5420.h index fd2d482e4a..5c9a3c0b21 100644 --- a/include/configs/smdk5420.h +++ b/include/configs/smdk5420.h @@ -23,4 +23,8 @@ #define CONFIG_IDENT_STRING " for SMDK5420" #define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0" +/* DRAM Memory Banks */ +#define CONFIG_NR_DRAM_BANKS 7 +#define SDRAM_BANK_SIZE (512UL << 20UL) /* 512 MB */ + #endif /* __CONFIG_SMDK5420_H */ diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h index 1ebee714ba..942af2e7f6 100644 --- a/include/configs/snapper9260.h +++ b/include/configs/snapper9260.h @@ -15,11 +15,17 @@ #include <asm/hardware.h> #include <linux/sizes.h> -#define CONFIG_SYS_TEXT_BASE 0x20000000 +#define CONFIG_SYS_TEXT_BASE 0x21f00000 /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* External Crystal, in Hz */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DM +#define CONFIG_CMD_DM +#define CONFIG_DM_GPIO +#define CONFIG_DM_SERIAL +#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) /* CPU */ #define CONFIG_ARCH_CPU_INIT @@ -84,8 +90,10 @@ /* UARTs/Serial console */ #define CONFIG_ATMEL_USART +#ifndef CONFIG_DM_SERIAL #define CONFIG_USART_BASE ATMEL_BASE_DBGU #define CONFIG_USART_ID ATMEL_ID_SYS +#endif #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_PROMPT "Snapper> " @@ -159,7 +167,7 @@ #define CONFIG_CMD_DHCP #define CONFIG_CMD_FAT #define CONFIG_CMD_I2C -#undef CONFIG_CMD_GPIO +#define CONFIG_CMD_GPIO #define CONFIG_CMD_USB #define CONFIG_CMD_MII #define CONFIG_CMD_NAND diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index c436fdaf52..c4ac94d0eb 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -11,7 +11,6 @@ /* Virtual target or real hardware */ #undef CONFIG_SOCFPGA_VIRTUAL_TARGET -#define CONFIG_ARMV7 #define CONFIG_SYS_THUMB_BUILD #define CONFIG_SOCFPGA diff --git a/include/configs/sun7i.h b/include/configs/sun7i.h index ea40790322..f6b1b3edc1 100644 --- a/include/configs/sun7i.h +++ b/include/configs/sun7i.h @@ -22,10 +22,7 @@ #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #endif -#define CONFIG_ARMV7_VIRT 1 -#define CONFIG_ARMV7_NONSEC 1 #define CONFIG_ARMV7_PSCI 1 -#define CONFIG_ARMV7_PSCI_NR_CPUS 2 #define CONFIG_ARMV7_SECURE_BASE SUNXI_SRAM_B_BASE #define CONFIG_SYS_CLK_FREQ 24000000 diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index ce038eddf0..3f890b2fb0 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -197,6 +197,36 @@ #define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_CMD_GPIO +#ifdef CONFIG_VIDEO +/* + * The amount of RAM that is reserved for the FB. This will not show up as + * RAM to the kernel, but will be reclaimed by a KMS driver in future. + */ +#define CONFIG_SUNXI_FB_SIZE (8 << 20) + +/* Do we want to initialize a simple FB? */ +#define CONFIG_VIDEO_DT_SIMPLEFB + +#define CONFIG_VIDEO_SUNXI + +#define CONFIG_CFB_CONSOLE +#define CONFIG_VIDEO_SW_CURSOR +#define CONFIG_VIDEO_LOGO + +/* allow both serial and cfb console. */ +#define CONFIG_CONSOLE_MUX +/* stop x86 thinking in cfbconsole from trying to init a pc keyboard */ +#define CONFIG_VGA_AS_SINGLE_DEVICE + +#define CONFIG_SYS_MEM_TOP_HIDE ((CONFIG_SUNXI_FB_SIZE + 0xFFF) & ~0xFFF) + +/* To be able to hook simplefb into dt */ +#ifdef CONFIG_VIDEO_DT_SIMPLEFB +#define CONFIG_OF_BOARD_SETUP +#endif + +#endif /* CONFIG_VIDEO */ + /* Ethernet support */ #ifdef CONFIG_SUNXI_EMAC #define CONFIG_MII /* MII PHY management */ @@ -217,6 +247,13 @@ #define CONFIG_USB_STORAGE #endif +#ifdef CONFIG_USB_KEYBOARD +#define CONFIG_CONSOLE_MUX +#define CONFIG_PREBOOT +#define CONFIG_SYS_STDIO_DEREGISTER +#define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE +#endif + #if !defined CONFIG_ENV_IS_IN_MMC && \ !defined CONFIG_ENV_IS_IN_NAND && \ !defined CONFIG_ENV_IS_IN_FAT && \ @@ -225,6 +262,7 @@ #endif #define CONFIG_MISC_INIT_R +#define CONFIG_SYS_CONSOLE_IS_IN_ENV #ifndef CONFIG_SPL_BUILD #include <config_distro_defaults.h> @@ -266,7 +304,31 @@ #include <config_distro_bootcmd.h> +#ifdef CONFIG_USB_KEYBOARD +#define CONSOLE_STDIN_SETTINGS \ + "preboot=usb start\0" \ + "stdin=serial,usbkbd\0" +#else +#define CONSOLE_STDIN_SETTINGS \ + "stdin=serial\0" +#endif + +#ifdef CONFIG_VIDEO +#define CONSOLE_STDOUT_SETTINGS \ + "stdout=serial,vga\0" \ + "stderr=serial,vga\0" +#else +#define CONSOLE_STDOUT_SETTINGS \ + "stdout=serial\0" \ + "stderr=serial\0" +#endif + +#define CONSOLE_ENV_SETTINGS \ + CONSOLE_STDIN_SETTINGS \ + CONSOLE_STDOUT_SETTINGS + #define CONFIG_EXTRA_ENV_SETTINGS \ + CONSOLE_ENV_SETTINGS \ MEM_LAYOUT_ENV_SETTINGS \ "fdtfile=" CONFIG_FDTFILE "\0" \ "console=ttyS0,115200\0" \ diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h index d687717dfb..a160329c1d 100644 --- a/include/configs/tao3530.h +++ b/include/configs/tao3530.h @@ -16,7 +16,6 @@ /* * High Level Configuration Options */ -#define CONFIG_ARMV7 /* This is an ARM V7 CPU core */ #define CONFIG_OMAP /* in a TI OMAP core */ #define CONFIG_OMAP_GPIO diff --git a/include/configs/tcm-bf518.h b/include/configs/tcm-bf518.h index 66730267a3..e96a7427e5 100644 --- a/include/configs/tcm-bf518.h +++ b/include/configs/tcm-bf518.h @@ -103,8 +103,8 @@ /* * I2C Settings */ -#define CONFIG_BFIN_TWI_I2C 1 -#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_ADI /* diff --git a/include/configs/tcm-bf537.h b/include/configs/tcm-bf537.h index 999834351f..42129fb7d8 100644 --- a/include/configs/tcm-bf537.h +++ b/include/configs/tcm-bf537.h @@ -122,8 +122,8 @@ /* * I2C Settings */ -#define CONFIG_BFIN_TWI_I2C 1 -#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_ADI /* diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h index 5d2b12a11d..d690045eb0 100644 --- a/include/configs/tegra-common.h +++ b/include/configs/tegra-common.h @@ -118,7 +118,9 @@ #define CONFIG_SYS_MEMTEST_START (NV_PA_SDRC_CS0 + 0x600000) #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000) +#ifndef CONFIG_SPL_BUILD #define CONFIG_USE_ARCH_MEMCPY +#endif /*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/tnetv107x_evm.h b/include/configs/tnetv107x_evm.h index 162826f7d3..00a1a9e002 100644 --- a/include/configs/tnetv107x_evm.h +++ b/include/configs/tnetv107x_evm.h @@ -16,7 +16,6 @@ #include <asm/arch/clock.h> /* Architecture, CPU, etc */ -#define CONFIG_ARM1176 #define CONFIG_TNETV107X #define CONFIG_TNETV107X_EVM #define CONFIG_TNETV107X_WATCHDOG diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h index c94eee19a2..a099687d46 100644 --- a/include/configs/tqma6.h +++ b/include/configs/tqma6.h @@ -68,6 +68,8 @@ #define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO +#define TQMA6_SPI_FLASH_SECTOR_SIZE SZ_64K + #define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_BUS 0 #define CONFIG_SF_DEFAULT_CS 0 @@ -275,12 +277,10 @@ #elif defined(CONFIG_TQMA6X_SPI_BOOT) -#define CONFIG_FLASH_SECTOR_SIZE 0x10000 - #define TQMA6_UBOOT_OFFSET 0x400 #define TQMA6_UBOOT_SECTOR_START 0x0 /* max u-boot size: 512k */ -#define TQMA6_UBOOT_SECTOR_SIZE CONFIG_FLASH_SECTOR_SIZE +#define TQMA6_UBOOT_SECTOR_SIZE TQMA6_SPI_FLASH_SECTOR_SIZE #define TQMA6_UBOOT_SECTOR_COUNT 0x8 #define TQMA6_UBOOT_SIZE (TQMA6_UBOOT_SECTOR_SIZE * \ TQMA6_UBOOT_SECTOR_COUNT) @@ -288,7 +288,7 @@ #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_SYS_REDUNDAND_ENVIRONMENT #define CONFIG_ENV_OFFSET (TQMA6_UBOOT_SIZE) -#define CONFIG_ENV_SECT_SIZE CONFIG_FLASH_SECTOR_SIZE +#define CONFIG_ENV_SECT_SIZE TQMA6_SPI_FLASH_SECTOR_SIZE #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \ CONFIG_ENV_SECT_SIZE) @@ -299,7 +299,7 @@ #define TQMA6_FDT_OFFSET (CONFIG_ENV_OFFSET_REDUND + \ CONFIG_ENV_SECT_SIZE) -#define TQMA6_FDT_SECT_SIZE (CONFIG_FLASH_SECTOR_SIZE) +#define TQMA6_FDT_SECT_SIZE (TQMA6_SPI_FLASH_SECTOR_SIZE) #define TQMA6_FDT_SECTOR_START 0x0a /* 8 Sector u-boot, 2 Sector env */ #define TQMA6_FDT_SECTOR_COUNT 0x01 @@ -320,7 +320,7 @@ "setexpr blkc ${filesize} + " \ __stringify(TQMA6_UBOOT_OFFSET) "; " \ "setexpr size ${uboot_sectors} * " \ - __stringify(CONFIG_FLASH_SECTOR_SIZE)"; " \ + __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \ "if itest ${blkc} <= ${size}; then " \ "sf probe; " \ "sf erase 0 ${size}; " \ @@ -332,9 +332,9 @@ "update_kernel=run kernel_name; if tftp ${kernel}; then " \ "if itest ${filesize} > 0; then " \ "setexpr size ${kernel_sectors} * " \ - __stringify(CONFIG_FLASH_SECTOR_SIZE)"; " \ + __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \ "setexpr offset ${kernel_start} * " \ - __stringify(CONFIG_FLASH_SECTOR_SIZE)"; " \ + __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \ "if itest ${filesize} <= ${size}; then " \ "sf probe; " \ "sf erase ${offset} ${size}; " \ @@ -346,9 +346,9 @@ "update_fdt=if tftp ${fdt_file}; then " \ "if itest ${filesize} > 0; then " \ "setexpr size ${fdt_sectors} * " \ - __stringify(CONFIG_FLASH_SECTOR_SIZE)"; " \ + __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \ "setexpr offset ${fdt_start} * " \ - __stringify(CONFIG_FLASH_SECTOR_SIZE)"; " \ + __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \ "if itest ${filesize} <= ${size}; then " \ "sf probe; " \ "sf erase ${offset} ${size}; " \ @@ -359,16 +359,16 @@ "setenv filesize 0; setenv size ; setenv offset\0" \ "loadimage=sf probe; " \ "setexpr size ${kernel_sectors} * " \ - __stringify(CONFIG_FLASH_SECTOR_SIZE)"; " \ + __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \ "setexpr offset ${kernel_start} * " \ - __stringify(CONFIG_FLASH_SECTOR_SIZE)"; " \ + __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \ "sf read ${loadaddr} ${offset} ${size}; " \ "setenv size ; setenv offset\0" \ "loadfdt=sf probe; " \ "setexpr size ${fdt_sectors} * " \ - __stringify(CONFIG_FLASH_SECTOR_SIZE)"; " \ + __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \ "setexpr offset ${fdt_start} * " \ - __stringify(CONFIG_FLASH_SECTOR_SIZE)"; " \ + __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \ "sf read ${${fdt_addr}} ${offset} ${size}; " \ "setenv size ; setenv offset\0" \ diff --git a/include/configs/tt01.h b/include/configs/tt01.h index 0937653fc2..cf169a4c89 100644 --- a/include/configs/tt01.h +++ b/include/configs/tt01.h @@ -13,7 +13,6 @@ #include <asm/arch/imx-regs.h> /* High Level Configuration Options */ -#define CONFIG_ARM1136 #define CONFIG_MX31 #define CONFIG_DISPLAY_CPUINFO diff --git a/include/configs/udoo.h b/include/configs/udoo.h index 700e9c1b23..b4a6245362 100644 --- a/include/configs/udoo.h +++ b/include/configs/udoo.h @@ -191,7 +191,6 @@ /* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP #define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT "=> " #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 256 diff --git a/include/configs/versatile.h b/include/configs/versatile.h index 29c32fee51..900b89c997 100644 --- a/include/configs/versatile.h +++ b/include/configs/versatile.h @@ -19,8 +19,7 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_ARM926EJS 1 /* This is an arm926ejs CPU core */ -#define CONFIG_VERSATILE 1 /* in Versatile Platform Board */ +#define CONFIG_VERSATILE 1 /* This is Versatile Platform Board */ #define CONFIG_ARCH_VERSATILE 1 /* Specifically, a Versatile */ #define CONFIG_SYS_MEMTEST_START 0x100000 diff --git a/include/configs/vexpress_ca15_tc2.h b/include/configs/vexpress_ca15_tc2.h index 982f4a75ef..b43afa2938 100644 --- a/include/configs/vexpress_ca15_tc2.h +++ b/include/configs/vexpress_ca15_tc2.h @@ -18,6 +18,4 @@ #define CONFIG_SYSFLAGS_ADDR 0x1c010030 #define CONFIG_SMP_PEN_ADDR CONFIG_SYSFLAGS_ADDR -#define CONFIG_ARMV7_VIRT - #endif diff --git a/include/configs/woodburn_common.h b/include/configs/woodburn_common.h index d3d3e694cd..c7a17f7a49 100644 --- a/include/configs/woodburn_common.h +++ b/include/configs/woodburn_common.h @@ -14,7 +14,6 @@ #include <asm/arch/imx-regs.h> /* High Level Configuration Options */ -#define CONFIG_ARM1136 /* This is an arm1136 CPU core */ #define CONFIG_MX35 #define CONFIG_MX35_HCLK_FREQ 24000000 diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h new file mode 100644 index 0000000000..f16ae32913 --- /dev/null +++ b/include/configs/x86-common.h @@ -0,0 +1,251 @@ +/* + * Copyright (c) 2011 The Chromium OS Authors. + * (C) Copyright 2008 + * Graeme Russ, graeme.russ@gmail.com. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <asm/ibmpc.h> + +#ifndef __CONFIG_X86_COMMON_H +#define __CONFIG_X86_COMMON_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_SHOW_BOOT_PROGRESS +#define CONFIG_SYS_VSNPRINTF +#define CONFIG_ZBOOT_32 +#define CONFIG_PHYSMEM +#define CONFIG_DISPLAY_BOARDINFO_LATE +#define CONFIG_DISPLAY_CPUINFO + +#define CONFIG_DM +#define CONFIG_CMD_DM +#define CONFIG_DM_GPIO +#define CONFIG_DM_SERIAL + +#define CONFIG_LMB +#define CONFIG_OF_LIBFDT + +#define CONFIG_LZO +#define CONFIG_FIT +#undef CONFIG_ZLIB +#undef CONFIG_GZIP +#define CONFIG_SYS_BOOTM_LEN (16 << 20) + +/* SATA AHCI storage */ + +#define CONFIG_SCSI_AHCI +#define CONFIG_SATA_INTEL +#ifdef CONFIG_SCSI_AHCI +#define CONFIG_LIBATA +#define CONFIG_SYS_64BIT_LBA + +#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2 +#define CONFIG_SYS_SCSI_MAX_LUN 1 +#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ + CONFIG_SYS_SCSI_MAX_LUN) +#endif + +/* Generic TPM interfaced through LPC bus */ +#define CONFIG_TPM +#define CONFIG_TPM_TIS_LPC +#define CONFIG_TPM_TIS_BASE_ADDRESS 0xfed40000 + +/*----------------------------------------------------------------------- + * Real Time Clock Configuration + */ +#define CONFIG_RTC_MC146818 +#define CONFIG_SYS_ISA_IO_BASE_ADDRESS 0 +#define CONFIG_SYS_ISA_IO CONFIG_SYS_ISA_IO_BASE_ADDRESS + +/*----------------------------------------------------------------------- + * Serial Configuration + */ +#define CONFIG_SYS_NS16550 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {300, 600, 1200, 2400, 4800, \ + 9600, 19200, 38400, 115200} +#define CONFIG_SYS_NS16550_PORT_MAPPED + +#define CONFIG_CONSOLE_MUX +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_SYS_STDIO_DEREGISTER + +#define CONFIG_CMDLINE_EDITING +#define CONFIG_COMMAND_HISTORY +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_HUSH_PARSER + +#define CONFIG_SUPPORT_VFAT +/************************************************************ + * ATAPI support (experimental) + ************************************************************/ +#define CONFIG_ATAPI + +/************************************************************ + * DISK Partition support + ************************************************************/ +#define CONFIG_EFI_PARTITION +#define CONFIG_DOS_PARTITION +#define CONFIG_MAC_PARTITION +#define CONFIG_ISO_PARTITION /* Experimental */ + +#define CONFIG_CMD_PART +#define CONFIG_CMD_CBFS +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_EXT4_WRITE +#define CONFIG_PARTITION_UUIDS + +#define CONFIG_SYS_CONSOLE_INFO_QUIET + +/* x86 GPIOs are accessed through a PCI device */ +#define CONFIG_INTEL_ICH6_GPIO + +/*----------------------------------------------------------------------- + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_BDI +#define CONFIG_CMD_BOOTD +#define CONFIG_CMD_CONSOLE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_ECHO +#undef CONFIG_CMD_FLASH +#define CONFIG_CMD_FPGA +#define CONFIG_CMD_FPGA_LOADMK +#define CONFIG_CMD_GPIO +#define CONFIG_CMD_IMI +#undef CONFIG_CMD_IMLS +#define CONFIG_CMD_IO +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_ITEST +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MISC +#define CONFIG_CMD_NET +#undef CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_RUN +#define CONFIG_CMD_SAVEENV +#define CONFIG_CMD_SETGETDCR +#define CONFIG_CMD_SOURCE +#define CONFIG_CMD_TIME +#define CONFIG_CMD_GETTIME +#define CONFIG_CMD_XIMG +#define CONFIG_CMD_SCSI + +#define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT2 + +#define CONFIG_CMD_ZBOOT +#define CONFIG_CMD_ELF + +#define CONFIG_BOOTARGS \ + "root=/dev/sdb3 init=/sbin/init rootwait ro" +#define CONFIG_BOOTCOMMAND \ + "ext2load scsi 0:3 01000000 /boot/vmlinuz; zboot 01000000" + +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 115200 +#endif + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_CBSIZE 512 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + \ + 16) +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_SYS_MEMTEST_START 0x00100000 +#define CONFIG_SYS_MEMTEST_END 0x01000000 +#define CONFIG_SYS_LOAD_ADDR 0x20000000 + +/*----------------------------------------------------------------------- + * Video Configuration + */ +#define CONFIG_VIDEO +#define CONFIG_VIDEO_SW_CURSOR +#define VIDEO_FB_16BPP_WORD_SWAP +#define CONFIG_I8042_KBD +#define CONFIG_CFB_CONSOLE + +/*----------------------------------------------------------------------- + * CPU Features + */ + +#define CONFIG_SYS_X86_TSC_TIMER +#define CONFIG_SYS_PCAT_INTERRUPTS +#define CONFIG_SYS_PCAT_TIMER +#define CONFIG_SYS_NUM_IRQS 16 + +#define CONFIG_SYS_STACK_SIZE (32 * 1024) +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_MALLOC_LEN 0x200000 +#define CONFIG_SYS_MALLOC_F_LEN (2 << 10) + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +/*----------------------------------------------------------------------- + * FLASH configuration + */ +#define CONFIG_ICH_SPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_MACRONIX +#define CONFIG_SPI_FLASH_WINBOND +#define CONFIG_SPI_FLASH_GIGADEVICE +#define CONFIG_SYS_NO_FLASH +#define CONFIG_CMD_SF +#define CONFIG_CMD_SF_TEST +#define CONFIG_CMD_SPI +#define CONFIG_SPI + +/*----------------------------------------------------------------------- + * Environment configuration + */ +#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_SIZE 0x01000 + +/*----------------------------------------------------------------------- + * PCI configuration + */ +#define CONFIG_PCI + +/*----------------------------------------------------------------------- + * USB configuration + */ +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_PCI +#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 12 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 +#define CONFIG_USB_STORAGE +#define CONFIG_USB_KEYBOARD +#define CONFIG_SYS_USB_EVENT_POLL + +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX +#define CONFIG_USB_ETHER_SMSC95XX +#define CONFIG_TFTP_TSIZE +#define CONFIG_CMD_DHCP +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +#define CONFIG_CMD_USB + +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_STD_DEVICES_SETTINGS + +#endif /* __CONFIG_H */ diff --git a/include/configs/zmx25.h b/include/configs/zmx25.h index 8ffe6f1e08..356ac886f2 100644 --- a/include/configs/zmx25.h +++ b/include/configs/zmx25.h @@ -12,7 +12,6 @@ #include <asm/arch/imx-regs.h> -#define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_MX25 #define CONFIG_SYS_TEXT_BASE 0xA0000000 diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 2bc1562cec..c39c568ff8 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -10,9 +10,6 @@ #ifndef __CONFIG_ZYNQ_COMMON_H #define __CONFIG_ZYNQ_COMMON_H -/* High Level configuration Options */ -#define CONFIG_ARMV7 - /* CPU clock */ #ifndef CONFIG_CPU_FREQ_HZ # define CONFIG_CPU_FREQ_HZ 800000000 |
