summaryrefslogtreecommitdiffstats
path: root/include/configs/wepep250.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/wepep250.h')
-rw-r--r--include/configs/wepep250.h15
1 files changed, 7 insertions, 8 deletions
diff --git a/include/configs/wepep250.h b/include/configs/wepep250.h
index c88c4ab5ce..ecb7215e2e 100644
--- a/include/configs/wepep250.h
+++ b/include/configs/wepep250.h
@@ -1,4 +1,4 @@
-/*
+/*
* Copyright (C) 2003 ETC s.r.o.
*
* This program is free software; you can redistribute it and/or
@@ -52,7 +52,7 @@
/*
* Boot options. Setting delay to -1 stops autostart count down.
* NOTE: Sending parameters to kernel depends on kernel version and
- * 2.4.19-rmk6-pxa1 patch used while my u-boot coding didn't accept
+ * 2.4.19-rmk6-pxa1 patch used while my u-boot coding didn't accept
* parameters at all! Do not get confused by them so.
*/
#define CONFIG_BOOTDELAY -1
@@ -71,7 +71,7 @@
#define CFG_BARGSIZE CFG_CBSIZE /* boot args buf size */
#define CFG_MEMTEST_START 0xa0400000 /* memtest test area */
-#define CFG_MEMTEST_END 0xa0800000
+#define CFG_MEMTEST_END 0xa0800000
#undef CFG_CLKS_IN_HZ /* use HZ for freq. display */
@@ -128,7 +128,7 @@
#define CFG_MAX_FLASH_BANKS 1 /* FLASH banks count (not chip count)*/
#define CFG_MAX_FLASH_SECT 128 /* number of sector in FLASH bank */
#define WEP_FLASH_BUS_WIDTH 4 /* we use 32 bit FLASH memory... */
-#define WEP_FLASH_INTERLEAVE 2 /* ... made of 2 chips */
+#define WEP_FLASH_INTERLEAVE 2 /* ... made of 2 chips */
#define WEP_FLASH_BANK_SIZE 0x2000000 /* size of one flash bank*/
#define WEP_FLASH_SECT_SIZE 0x0040000 /* size of erase sector */
#define WEP_FLASH_BASE 0x0000000 /* location of flash memory */
@@ -137,9 +137,9 @@
/* This should be defined if CFI FLASH device is present. Actually benefit
is not so clear to me. In other words we can provide more informations
- to user, but this expects more complex flash handling we do not provide
+ to user, but this expects more complex flash handling we do not provide
now.*/
-#undef CFG_FLASH_CFI
+#undef CFG_FLASH_CFI
#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* timeout for Erase operation */
#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* timeout for Write operation */
@@ -173,7 +173,7 @@
#define CFG_MONITOR_LEN 0x20000 /* 128kb ( 1 flash sector ) */
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_ADDR 0x20000 /* absolute address for now */
-#define CFG_ENV_SIZE 0x2000
+#define CFG_ENV_SIZE 0x2000
#undef CONFIG_ENV_OVERWRITE /* env is not writable now */
@@ -185,4 +185,3 @@
#define CFG_LOAD_ADDR 0x40000
#endif /* __CONFIG_H */
-
OpenPOWER on IntegriCloud