1 files changed, 130 insertions, 0 deletions
diff --git a/include/configs/tk71.h b/include/configs/tk71.h
new file mode 100644
index 0000000000..f929f203ab
--- /dev/null
+++ b/include/configs/tk71.h
@@ -0,0 +1,130 @@
+/*
+ * Copyright (C) 2012 Marek Vasut <marex@denx.de>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef __CONFIG_TK71_H__
+#define __CONFIG_TK71_H__
+
+/*
+ * Version number information
+ */
+#define CONFIG_IDENT_STRING	"\nKa-Ro TK71"
+
+/*
+ * High Level Configuration Options (easy to change)
+ */
+#define CONFIG_FEROCEON_88FR131	1	/* CPU Core subversion */
+#define CONFIG_KIRKWOOD		1	/* SOC Family Name */
+#define CONFIG_KW88F6281	1	/* SOC Name */
+#define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
+#define CONFIG_NR_DRAM_BANKS	1
+
+#define MACH_TYPE_TK71		2399
+#define CONFIG_MACH_TYPE	MACH_TYPE_TK71
+
+/*
+ * Commands configuration
+ */
+#define	CONFIG_SYS_HUSH_PARSER
+
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_DOS_PARTITION
+#define CONFIG_SUPPORT_VFAT
+
+#include <config_cmd_default.h>
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_USB
+
+/*
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
+ */
+#include "mv-common.h"
+
+/*
+ * NAND flash
+ */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_JFFS2_NAND
+#define CONFIG_JFFS2_DEV		"nand0,3"
+#endif
+
+/*
+ * Ethernet Driver configuration
+ */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_MVGBE_PORTS	{1, 0}
+#define CONFIG_PHY_BASE_ADR	0x08
+#endif
+
+/*
+ * USB/EHCI
+ */
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_KIRKWOOD
+#define CONFIG_EHCI_IS_TDI
+#define CONFIG_USB_STORAGE
+#endif
+
+/*
+ *  Environment variables configurations
+ */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_SECT_SIZE		0x20000
+#else
+#define CONFIG_ENV_IS_NOWHERE
+#endif
+
+#define CONFIG_ENV_SIZE			0x20000
+#define CONFIG_ENV_ADDR			0x80000
+#define CONFIG_ENV_OFFSET		0x80000
+
+/*
+ * Default environment variables
+ */
+#define CONFIG_BOOTCOMMAND "nand read 0x800000 kernel 0x300000; bootm;"
+#define CONFIG_MTDPARTS 	"512K(u-boot),512K(u-boot-env),3M(kernel),-(root)"
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"update_uboot=dhcp u-boot.kwb; nand erase.part u-boot; nand write ${fileaddr} u-boot ${filesize}\0" \
+	"update_kernel=dhcp uImage-tk71; nand erase.part kernel; nand write ${fileaddr} kernel ${filesize} \0" \
+	"update_rootfs=dhcp rootfs-tk71; nand erase.part root; nand write ${fileaddr} root ${filesize}\0" \
+	"update_all=run update_uboot; run update_kernel; run update_rootfs; reset\0" \
+	"mtdids=nand0=orion_nand\0" \
+	"mtdparts=mtdparts=orion_nand:"CONFIG_MTDPARTS"\0" \
+	"bootargs=console=ttyS0,115200 mtdparts=orion_nand:"CONFIG_MTDPARTS" rootfstype=jffs2 root=/dev/mtdblock3 rw\0"
+#define MTDIDS_DEFAULT			"nand0=orion_nand"
+#define MTDPARTS_DEFAULT		"mtdparts=orion_nand:"CONFIG_MTDPARTS
+
+#define PHYS_SDRAM_1		0x00000000	/* Base address */
+#define PHYS_SDRAM_1_SIZE	0x20000000	/* Max 512 MB RAM */
+
+#endif	/* __CONFIG_TK71_H__ */