diff options
Diffstat (limited to 'include/configs/omap1610h2.h')
| -rw-r--r-- | include/configs/omap1610h2.h | 60 |
1 files changed, 30 insertions, 30 deletions
diff --git a/include/configs/omap1610h2.h b/include/configs/omap1610h2.h index aeb2fec9c2..e2a63607c0 100644 --- a/include/configs/omap1610h2.h +++ b/include/configs/omap1610h2.h @@ -51,8 +51,8 @@ /* * Size of malloc() pool */ -#define CFG_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Hardware drivers @@ -64,11 +64,11 @@ /* * NS16550 Configuration */ -#define CFG_NS16550 -#define CFG_NS16550_SERIAL -#define CFG_NS16550_REG_SIZE (-4) -#define CFG_NS16550_CLK (48000000) /* can be 12M/32Khz or 48Mhz */ -#define CFG_NS16550_COM1 0xfffb0000 /* uart1, bluetooth uart */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK (48000000) /* can be 12M/32Khz or 48Mhz */ +#define CONFIG_SYS_NS16550_COM1 0xfffb0000 /* uart1, bluetooth uart */ /* * select serial console configuration @@ -79,7 +79,7 @@ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* @@ -104,7 +104,7 @@ #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "console=ttyS0,115200n8 noinitrd root=/dev/nfs ip=dhcp" #define CONFIG_BOOTCOMMAND "bootp;tftp;bootm" -#define CFG_AUTOLOAD "n" /* No autoload */ +#define CONFIG_SYS_AUTOLOAD "n" /* No autoload */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ @@ -114,27 +114,27 @@ /* * Miscellaneous configurable options */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "OMAP1610 H2 # " /* Monitor Command Prompt */ -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "OMAP1610 H2 # " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_MEMTEST_START 0x10000000 /* memtest works on */ -#define CFG_MEMTEST_END 0x12000000 /* 32 MB in DRAM */ +#define CONFIG_SYS_MEMTEST_START 0x10000000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x12000000 /* 32 MB in DRAM */ -#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ +#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ -#define CFG_LOAD_ADDR 0x10000000 /* default load address */ +#define CONFIG_SYS_LOAD_ADDR 0x10000000 /* default load address */ /* The 1610 has 6 timers, they can be driven by the RefClk (12Mhz) or by * DPLL1. This time is further subdivided by a local divisor. */ -#define CFG_TIMERBASE 0xFFFEC500 /* use timer 1 */ -#define CFG_PVT 7 /* 2^(pvt+1), divide by 256 */ -#define CFG_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT)) +#define CONFIG_SYS_TIMERBASE 0xFFFEC500 /* use timer 1 */ +#define CONFIG_SYS_PVT 7 /* 2^(pvt+1), divide by 256 */ +#define CONFIG_SYS_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PVT)) /*----------------------------------------------------------------------- * Stack sizes @@ -162,30 +162,30 @@ #ifndef __ASSEMBLY__ extern unsigned long omap_flash_base; /* set in flash__init */ #endif -#define CFG_FLASH_BASE omap_flash_base +#define CONFIG_SYS_FLASH_BASE omap_flash_base #elif defined(CONFIG_CS0_BOOT) -#define CFG_FLASH_BASE PHYS_FLASH_1_BM0 +#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1_BM0 #else -#define CFG_FLASH_BASE PHYS_FLASH_1_BM1 +#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1_BM1 #endif /*----------------------------------------------------------------------- * FLASH and environment organization */ -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ #define PHYS_FLASH_SIZE 0x02000000 /* 32MB */ -#define CFG_MAX_FLASH_SECT (259) /* max number of sectors on one chip */ +#define CONFIG_SYS_MAX_FLASH_SECT (259) /* max number of sectors on one chip */ /* addr of environment */ -#define CONFIG_ENV_ADDR (CFG_FLASH_BASE + 0x020000) +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x020000) /* timeout values are in ticks */ -#define CFG_FLASH_ERASE_TOUT (20*CFG_HZ) /* Timeout for Flash Erase */ -#define CFG_FLASH_WRITE_TOUT (20*CFG_HZ) /* Timeout for Flash Write */ +#define CONFIG_SYS_FLASH_ERASE_TOUT (20*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ +#define CONFIG_SYS_FLASH_WRITE_TOUT (20*CONFIG_SYS_HZ) /* Timeout for Flash Write */ #define CONFIG_ENV_IS_IN_FLASH 1 #define CONFIG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */ |
