diff options
Diffstat (limited to 'include/configs/mx28evk.h')
| -rw-r--r-- | include/configs/mx28evk.h | 56 |
1 files changed, 52 insertions, 4 deletions
diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h index 07f88ca4c7..4fd67eb4a0 100644 --- a/include/configs/mx28evk.h +++ b/include/configs/mx28evk.h @@ -14,7 +14,6 @@ /* System configurations */ #define CONFIG_MX28 /* i.MX28 SoC */ #define CONFIG_MACH_TYPE MACH_TYPE_MX28EVK -#define CONFIG_SYS_PROMPT "MX28EVK U-Boot > " /* U-Boot Commands */ #define CONFIG_SYS_NO_FLASH @@ -97,7 +96,7 @@ "512k(environment)," \ "512k(redundant-environment)," \ "4m(kernel)," \ - "128k(fdt)," \ + "512k(fdt)," \ "8m(ramdisk)," \ "-(filesystem)" #endif @@ -161,9 +160,9 @@ /* Extra Environment */ #define CONFIG_EXTRA_ENV_SETTINGS \ + "ubifs_file=filesystem.ubifs\0" \ "update_nand_full_filename=u-boot.nand\0" \ "update_nand_firmware_filename=u-boot.sb\0" \ - "update_sd_firmware_filename=u-boot.sd\0" \ "update_nand_firmware_maxsz=0x100000\0" \ "update_nand_stride=0x40\0" /* MX28 datasheet ch. 12.12 */ \ "update_nand_count=0x4\0" /* MX28 datasheet ch. 12.12 */ \ @@ -172,7 +171,7 @@ "nand info ; " \ "setexpr fcb_sz ${update_nand_stride} * ${update_nand_count};" \ "setexpr update_nand_fcb ${fcb_sz} * ${nand_writesize}\0" \ - "update_nand_full=" /* Update FCB, DBBT and FW */ \ + "update_nand_firmware_full=" /* Update FCB, DBBT and FW */ \ "if tftp ${update_nand_full_filename} ; then " \ "run update_nand_get_fcb_size ; " \ "nand scrub -y 0x0 ${filesize} ; " \ @@ -191,6 +190,55 @@ "nand write ${loadaddr} ${fcb_sz} ${filesize} ; " \ "nand write ${loadaddr} ${fw_off} ${filesize} ; " \ "fi\0" \ + "update_nand_kernel=" /* Update kernel */ \ + "mtdparts default; " \ + "nand erase.part kernel; " \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "${get_cmd} ${uimage}; " \ + "nand write ${loadaddr} kernel ${filesize}\0" \ + "update_nand_fdt=" /* Update fdt */ \ + "mtdparts default; " \ + "nand erase.part fdt; " \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "${get_cmd} ${fdt_file}; " \ + "nand write ${loadaddr} fdt ${filesize}\0" \ + "update_nand_filesystem=" /* Update filesystem */ \ + "mtdparts default; " \ + "nand erase.part filesystem; " \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "${get_cmd} ${ubifs_file}; " \ + "ubi part filesystem; " \ + "ubi create filesystem; " \ + "ubi write ${loadaddr} filesystem ${filesize}\0" \ + "nandargs=setenv bootargs console=${console_mainline},${baudrate} " \ + "rootfstype=ubifs ubi.mtd=6 root=ubi0_0 ${mtdparts}\0" \ + "nandboot=" /* Boot from NAND */ \ + "mtdparts default; " \ + "run nandargs; " \ + "nand read ${loadaddr} kernel 0x00400000; " \ + "if test ${boot_fdt} = yes; then " \ + "nand read ${fdt_addr} fdt 0x00080000; " \ + "bootm ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = no; then " \ + "bootm; " \ + "else " \ + "echo \"ERROR: Set boot_fdt to yes or no.\"; " \ + "fi; " \ + "fi\0" \ + "update_sd_firmware_filename=u-boot.sd\0" \ "update_sd_firmware=" /* Update the SD firmware partition */ \ "if mmc rescan ; then " \ "if tftp ${update_sd_firmware_filename} ; then " \ |
