diff options
Diffstat (limited to 'include/configs/hymod.h')
| -rw-r--r-- | include/configs/hymod.h | 728 |
1 files changed, 0 insertions, 728 deletions
diff --git a/include/configs/hymod.h b/include/configs/hymod.h deleted file mode 100644 index c973365e12..0000000000 --- a/include/configs/hymod.h +++ /dev/null @@ -1,728 +0,0 @@ -/* - * (C) Copyright 2000 - * Murray Jensen <Murray.Jensen@cmst.csiro.au> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Config header file for Hymod board - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_HYMOD 1 /* ...on a Hymod board */ -#define CONFIG_CPM2 1 /* Has a CPM2 */ - -#define CONFIG_SYS_TEXT_BASE 0x40000000 - -#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ - -#define CONFIG_BOARD_POSTCLK_INIT /* have board_postclk_init() function */ - -/* - * select serial console configuration - * - * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then - * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4 - * for SCC). - * - * if CONFIG_CONS_NONE is defined, then the serial console routines must - * defined elsewhere (for example, on the cogent platform, there are serial - * ports on the motherboard which are used for the serial console - see - * cogent/cma101/serial.[ch]). - */ -#undef CONFIG_CONS_ON_SMC /* define if console on SMC */ -#define CONFIG_CONS_ON_SCC /* define if console on SCC */ -#undef CONFIG_CONS_NONE /* define if console on something else*/ -#define CONFIG_CONS_INDEX 1 /* which serial channel for console */ -#define CONFIG_CONS_USE_EXTC /* SMC/SCC use ext clock not brg_clk */ -#define CONFIG_CONS_EXTC_RATE 3686400 /* SMC/SCC ext clk rate in Hz */ -#define CONFIG_CONS_EXTC_PINSEL 0 /* pin select 0=CLK3/CLK9,1=CLK5/CLK15*/ - -/* - * select ethernet configuration - * - * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then - * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3 - * for FCC) - * - * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. - */ -#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */ -#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */ -#undef CONFIG_ETHER_NONE /* define if ether on something else */ -#define CONFIG_ETHER_INDEX 1 /* which channel for ether */ -#define CONFIG_ETHER_LOOPBACK_TEST /* add ether external loopback test */ - -#ifdef CONFIG_ETHER_ON_FCC - -#if (CONFIG_ETHER_INDEX == 1) - -/* - * - Rx-CLK is CLK10 - * - Tx-CLK is CLK11 - * - RAM for BD/Buffers is on the 60x Bus (see 28-13) - * - Enable Full Duplex in FSMR - */ -# define CONFIG_SYS_CMXFCR_MASK1 (CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK) -# define CONFIG_SYS_CMXFCR_VALUE1 (CMXFCR_RF1CS_CLK10|CMXFCR_TF1CS_CLK11) -# define CONFIG_SYS_CPMFCR_RAMTYPE 0 -# define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB) - -# define MDIO_PORT 0 /* Port A */ -# define MDIO_DECLARE volatile ioport_t *iop = ioport_addr ( \ - (immap_t *) CONFIG_SYS_IMMR, MDIO_PORT ) -# define MDC_DECLARE MDIO_DECLARE - -# define MDIO_DATA_PINMASK 0x00040000 /* Pin 13 */ -# define MDIO_CLCK_PINMASK 0x00080000 /* Pin 12 */ - -#elif (CONFIG_ETHER_INDEX == 2) - -/* - * - Rx-CLK is CLK13 - * - Tx-CLK is CLK14 - * - RAM for BD/Buffers is on the 60x Bus (see 28-13) - * - Enable Full Duplex in FSMR - */ -# define CONFIG_SYS_CMXFCR_MASK2 (CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK) -# define CONFIG_SYS_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14) -# define CONFIG_SYS_CPMFCR_RAMTYPE 0 -# define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB) - -# define MDIO_PORT 0 /* Port A */ -# define MDIO_DECLARE volatile ioport_t *iop = ioport_addr ( \ - (immap_t *) CONFIG_SYS_IMMR, MDIO_PORT ) -# define MDC_DECLARE MDIO_DECLARE - -# define MDIO_DATA_PINMASK 0x00000040 /* Pin 25 */ -# define MDIO_CLCK_PINMASK 0x00000080 /* Pin 24 */ - -#elif (CONFIG_ETHER_INDEX == 3) - -/* - * - Rx-CLK is CLK15 - * - Tx-CLK is CLK16 - * - RAM for BD/Buffers is on the 60x Bus (see 28-13) - * - Enable Full Duplex in FSMR - */ -# define CONFIG_SYS_CMXFCR_MASK3 (CMXFCR_FC3|CMXFCR_RF3CS_MSK|CMXFCR_TF3CS_MSK) -# define CONFIG_SYS_CMXFCR_VALUE3 (CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16) -# define CONFIG_SYS_CPMFCR_RAMTYPE 0 -# define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB) - -# define MDIO_PORT 0 /* Port A */ -# define MDIO_DECLARE volatile ioport_t *iop = ioport_addr ( \ - (immap_t *) CONFIG_SYS_IMMR, MDIO_PORT ) -# define MDC_DECLARE MDIO_DECLARE - -# define MDIO_DATA_PINMASK 0x00000100 /* Pin 23 */ -# define MDIO_CLCK_PINMASK 0x00000200 /* Pin 22 */ - -#endif /* CONFIG_ETHER_INDEX */ - -#define CONFIG_MII /* MII PHY management */ -#define CONFIG_BITBANGMII /* bit-bang MII PHY management */ - -#define MDIO_ACTIVE (iop->pdir |= MDIO_DATA_PINMASK) -#define MDIO_TRISTATE (iop->pdir &= ~MDIO_DATA_PINMASK) -#define MDIO_READ ((iop->pdat & MDIO_DATA_PINMASK) != 0) - -#define MDIO(bit) if(bit) iop->pdat |= MDIO_DATA_PINMASK; \ - else iop->pdat &= ~MDIO_DATA_PINMASK - -#define MDC(bit) if(bit) iop->pdat |= MDIO_CLCK_PINMASK; \ - else iop->pdat &= ~MDIO_CLCK_PINMASK - -#define MIIDELAY udelay(1) - -#endif /* CONFIG_ETHER_ON_FCC */ - - -/* other options */ -#define CONFIG_HARD_I2C 1 /* To enable I2C hardware support */ -#define CONFIG_DTT_ADM1021 1 /* ADM1021 temp sensor support */ - -/* system clock rate (CLKIN) - equal to the 60x and local bus speed */ -#ifdef DEBUG -#define CONFIG_8260_CLKIN 33333333 /* in Hz */ -#else -#define CONFIG_8260_CLKIN 66666666 /* in Hz */ -#endif - -#if defined(CONFIG_CONS_USE_EXTC) -#define CONFIG_BAUDRATE 115200 -#else -#define CONFIG_BAUDRATE 9600 -#endif - -/* default ip addresses - these will be overridden */ -#define CONFIG_IPADDR 192.168.1.1 /* hymod "boot" address */ -#define CONFIG_SERVERIP 192.168.1.254 /* hymod "server" address */ - -#define CONFIG_LAST_STAGE_INIT - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_BSP -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_CDP -#define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_DTT -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_ELF -#define CONFIG_CMD_FAT -#define CONFIG_CMD_I2C -#define CONFIG_CMD_IMMAP -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_KGDB -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_PORTIO -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SNTP - -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_XIMG - -#ifdef DEBUG -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#define CONFIG_BOOT_RETRY_TIME 30 /* retry autoboot after 30 secs */ -#define CONFIG_BOOT_RETRY_MIN 1 /* can go down to 1 second timeout */ -/* Be selective on what keys can delay or stop the autoboot process - * To stop use: " " - */ -#define CONFIG_AUTOBOOT_KEYED -#define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds, " \ - "press <SPACE> to stop\n", bootdelay -#define CONFIG_AUTOBOOT_STOP_STR " " -#undef CONFIG_AUTOBOOT_DELAY_STR -#define DEBUG_BOOTKEYS 0 -#endif - -#if defined(CONFIG_CMD_KGDB) -#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */ -#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */ -#undef CONFIG_KGDB_NONE /* define if kgdb on something else */ -#define CONFIG_KGDB_INDEX 2 /* which serial channel for kgdb */ -#define CONFIG_KGDB_USE_EXTC /* SMC/SCC use ext clock not brg_clk */ -#define CONFIG_KGDB_EXTC_RATE 3686400 /* serial ext clk rate in Hz */ -#define CONFIG_KGDB_EXTC_PINSEL 0 /* pin select 0=CLK3/CLK9,1=CLK5/CLK15*/ -# if defined(CONFIG_KGDB_USE_EXTC) -#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */ -# else -#define CONFIG_KGDB_BAUDRATE 9600 /* speed to run kgdb serial port at */ -# endif -#endif - -#undef CONFIG_WATCHDOG /* disable platform specific watchdog */ - -#define CONFIG_RTC_PCF8563 /* use Philips PCF8563 RTC */ - -/* - * Hymod specific configurable options - */ -#undef CONFIG_SYS_HYMOD_DBLEDS /* walk mezz board LEDs */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x03c00000 /* 4 ... 60 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0x7e - -/* these are for the ST M24C02 2kbit serial i2c eeprom */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* base address */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* bytes of address */ -/* mask of address bits that overflow into the "EEPROM chip address" */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07 - -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* 16 byte write page size */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ - -#define CONFIG_SYS_I2C_MULTI_EEPROMS 1 /* hymod has two eeproms */ - -#define CONFIG_SYS_I2C_RTC_ADDR 0x51 /* philips PCF8563 RTC address */ - -/* - * standard dtt sensor configuration - bottom bit will determine local or - * remote sensor of the ADM1021, the rest determines index into - * CONFIG_SYS_DTT_ADM1021 array below. - * - * On HYMOD board, the remote sensor should be connected to the MPC8260 - * temperature diode thingy, but an errata said this didn't work and - * should be disabled - so it isn't connected. - */ -#if 0 -#define CONFIG_DTT_SENSORS { 0, 1 } -#else -#define CONFIG_DTT_SENSORS { 0 } -#endif - -/* - * ADM1021 temp sensor configuration (see dtt/adm1021.c for details). - * there will be one entry in this array for each two (dummy) sensors in - * CONFIG_DTT_SENSORS. - * - * For HYMOD board: - * - only one ADM1021 - * - i2c addr 0x2a (both ADD0 and ADD1 are N/C) - * - conversion rate 0x02 = 0.25 conversions/second - * - ALERT ouput disabled - * - local temp sensor enabled, min set to 0 deg, max set to 85 deg - * - remote temp sensor disabled (see comment for CONFIG_DTT_SENSORS above) - */ -#define CONFIG_SYS_DTT_ADM1021 { { 0x2a, 0x02, 0, 1, 0, 85, 0, } } - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ - -/*----------------------------------------------------------------------- - * Hard Reset Configuration Words - * - * if you change bits in the HRCW, you must also change the CONFIG_SYS_* - * defines for the various registers affected by the HRCW e.g. changing - * HRCW_DPPCxx requires you to also change CONFIG_SYS_SIUMCR. - */ -#ifdef DEBUG -#define CONFIG_SYS_HRCW_MASTER (HRCW_BPS11|HRCW_CIP|HRCW_L2CPC01|HRCW_DPPC10|\ - HRCW_ISB100|HRCW_BMS|HRCW_MMR11|HRCW_APPC10|\ - HRCW_MODCK_H0010) -#else -#define CONFIG_SYS_HRCW_MASTER (HRCW_BPS11|HRCW_CIP|HRCW_L2CPC01|HRCW_DPPC10|\ - HRCW_ISB100|HRCW_BMS|HRCW_MMR11|HRCW_APPC10|\ - HRCW_MODCK_H0101) -#endif -/* no slaves so just duplicate the master hrcw */ -#define CONFIG_SYS_HRCW_SLAVE1 CONFIG_SYS_HRCW_MASTER -#define CONFIG_SYS_HRCW_SLAVE2 CONFIG_SYS_HRCW_MASTER -#define CONFIG_SYS_HRCW_SLAVE3 CONFIG_SYS_HRCW_MASTER -#define CONFIG_SYS_HRCW_SLAVE4 CONFIG_SYS_HRCW_MASTER -#define CONFIG_SYS_HRCW_SLAVE5 CONFIG_SYS_HRCW_MASTER -#define CONFIG_SYS_HRCW_SLAVE6 CONFIG_SYS_HRCW_MASTER -#define CONFIG_SYS_HRCW_SLAVE7 CONFIG_SYS_HRCW_MASTER - -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xF0000000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_FPGA_BASE 0x80000000 -/* - * unfortunately, CONFIG_SYS_MONITOR_LEN must include the - * (very large i.e. 256kB) environment flash sector - */ -#define CONFIG_SYS_MONITOR_LEN (512 << 10) /* Reserve 512 kB for Monitor*/ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc()*/ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Mem map for Linux*/ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max num of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 67 /* max num of sects on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Flash Erase Timeout (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x40000 /* Total Size of Environment Sector */ -#define CONFIG_ENV_SECT_SIZE 0x40000 /* see README - env sect real size */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN-CONFIG_ENV_SECT_SIZE) -#define CONFIG_SYS_USE_PPCENV /* Environment embedded in sect .ppcenv */ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value*/ -#endif - -/*----------------------------------------------------------------------- - * HIDx - Hardware Implementation-dependent Registers 2-11 - *----------------------------------------------------------------------- - * HID0 also contains cache control - initially enable both caches and - * invalidate contents, then the final state leaves only the instruction - * cache enabled. Note that Power-On and Hard reset invalidate the caches, - * but Soft reset does not. - * - * HID1 has only read-only information - nothing to set. - */ -#define CONFIG_SYS_HID0_INIT (HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\ - HID0_IFEM|HID0_ABE) -#ifdef DEBUG -#define CONFIG_SYS_HID0_FINAL 0 -#else -#define CONFIG_SYS_HID0_FINAL (HID0_ICE|HID0_IFEM|HID0_ABE) -#endif -#define CONFIG_SYS_HID2 0 - -/*----------------------------------------------------------------------- - * RMR - Reset Mode Register 5-5 - *----------------------------------------------------------------------- - * turn on Checkstop Reset Enable - */ -#ifdef DEBUG -#define CONFIG_SYS_RMR 0 -#else -#define CONFIG_SYS_RMR RMR_CSRE -#endif - -/*----------------------------------------------------------------------- - * BCR - Bus Configuration 4-25 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_BCR (BCR_ETM) - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 4-31 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_SIUMCR (SIUMCR_DPPC10|SIUMCR_L2CPC01|\ - SIUMCR_APPC10|SIUMCR_MMR11) - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 4-35 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Watchdog & Bus Monitor Timer max, 60x & Local Bus Monitor enable - */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\ - SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\ - SYPCR_SWRI|SYPCR_SWP) -#endif /* CONFIG_WATCHDOG */ - -/*----------------------------------------------------------------------- - * TMCNTSC - Time Counter Status and Control 4-40 - *----------------------------------------------------------------------- - * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk, - * and enable Time Counter - */ -#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 4-42 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable - * Periodic timer - */ -#define CONFIG_SYS_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE) - -/*----------------------------------------------------------------------- - * SCCR - System Clock Control 9-8 - *----------------------------------------------------------------------- - * Ensure DFBRG is Divide by 16 - */ -#define CONFIG_SYS_SCCR (SCCR_DFBRG01) - -/*----------------------------------------------------------------------- - * RCCR - RISC Controller Configuration 13-7 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_RCCR 0 - -/* - * Init Memory Controller: - * - * Bank Bus Machine PortSz Device - * ---- --- ------- ------ ------ - * 0 60x GPCM 32 bit FLASH - * 1 60x GPCM 32 bit FLASH (same as 0 - unused for now) - * 2 60x SDRAM 64 bit SDRAM - * 3 Local UPMC 8 bit Main Xilinx configuration - * 4 Local GPCM 32 bit Main Xilinx register mode - * 5 Local UPMB 32 bit Main Xilinx port mode - * 6 Local UPMC 8 bit Mezz Xilinx configuration - */ - -/* - * Bank 0 - FLASH - * - * Quotes from the HYMOD IO Board Reference manual: - * - * "The flash memory is two Intel StrataFlash chips, each configured for - * 16 bit operation and connected to give a 32 bit wide port." - * - * "The chip select logic is configured to respond to both *CS0 and *CS1. - * Therefore the FLASH memory will be mapped to both bank 0 and bank 1. - * It is suggested that bank 0 be read-only and bank 1 be read/write. The - * FLASH will then appear as ROM during boot." - * - * Initially, we are only going to use bank 0 in read/write mode. - */ - -/* 32 bit, read-write, GPCM on 60x bus */ -#define CONFIG_SYS_BR0_PRELIM ((CONFIG_SYS_FLASH_BASE&BRx_BA_MSK)|\ - BRx_PS_32|BRx_MS_GPCM_P|BRx_V) -/* up to 32 Mb */ -#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(32)|ORxG_CSNT|ORxG_ACS_DIV2|ORxG_SCY_10_CLK) - -/* - * Bank 2 - SDRAM - * - * Quotes from the HYMOD IO Board Reference manual: - * - * "The main memory is implemented using TC59SM716FTL-10 SDRAM and has a - * fixed size of 64 Mbytes. The Toshiba TC59SM716FTL-10 is a CMOS synchronous - * dynamic random access memory organised as 4 banks by 4096 rows by 512 - * columns by 16 bits. Four chips provide a 64-bit port on the 60x bus." - * - * "The locations in SDRAM are accessed using multiplexed address pins to - * specify row and column. The pins also act to specify commands. The state - * of the inputs *RAS, *CAS and *WE defines the required action. The a10/AP - * pin may function as a row address or as the AUTO PRECHARGE control line, - * depending on the cycle type. The 60x bus SDRAM machine allows the MPC8260 - * address lines to be configured to the required multiplexing scheme." - */ - -#define CONFIG_SYS_SDRAM_SIZE 64 - -/* 64 bit, read-write, SDRAM on 60x bus */ -#define CONFIG_SYS_BR2_PRELIM ((CONFIG_SYS_SDRAM_BASE&BRx_BA_MSK)|\ - BRx_PS_64|BRx_MS_SDRAM_P|BRx_V) -/* 64 Mb, 4 int banks per dev, row start addr bit = A6, 12 row addr lines */ -#define CONFIG_SYS_OR2_PRELIM (MEG_TO_AM(CONFIG_SYS_SDRAM_SIZE)|\ - ORxS_BPD_4|ORxS_ROWST_PBI1_A6|ORxS_NUMR_12) - -/* - * The 60x Bus SDRAM Mode Register (PDSMR) is set as follows: - * - * Page Based Interleaving, Refresh Enable, Address Multiplexing where A5 - * is output on A16 pin (A6 on A17, and so on), use address pins A14-A16 - * as bank select, A7 is output on SDA10 during an ACTIVATE command, - * earliest timing for ACTIVATE command after REFRESH command is 6 clocks, - * earliest timing for ACTIVATE or REFRESH command after PRECHARGE command - * is 2 clocks, earliest timing for READ/WRITE command after ACTIVATE - * command is 2 clocks, earliest timing for PRECHARGE after last data - * was read is 1 clock, earliest timing for PRECHARGE after last data - * was written is 1 clock, CAS Latency is 2. - */ - -#define CONFIG_SYS_PSDMR (PSDMR_PBI|PSDMR_SDAM_A16_IS_A5|\ - PSDMR_BSMA_A14_A16|PSDMR_SDA10_PBI1_A7|\ - PSDMR_RFRC_6_CLK|PSDMR_PRETOACT_2W|\ - PSDMR_ACTTORW_2W|PSDMR_LDOTOPRE_1C|\ - PSDMR_WRC_1C|PSDMR_CL_2) - -/* - * The 60x bus-assigned SDRAM Refresh Timer (PSRT) (10-31) and the Refresh - * Timers Prescale (PTP) value in the Memory Refresh Timer Prescaler Register - * (MPTPR) (10-32) must also be set up (it used to be called the Periodic Timer - * Prescaler, hence the P instead of the R). The refresh timer period is given - * by (note that there was a change in the 8260 UM Errata): - * - * TimerPeriod = (PSRT + 1) / Fmptc - * - * where Fmptc is the BusClock divided by PTP. i.e. - * - * TimerPeriod = (PSRT + 1) / (BusClock / PTP) - * - * or - * - * TImerPeriod = (PTP * (PSRT + 1)) / BusClock - * - * The requirement for the Toshiba TC59SM716FTL-10 is that there must be - * 4K refresh cycles every 64 ms. i.e. one refresh cycle every 64000/4096 - * = 15.625 usecs. - * - * So PTP * (PSRT + 1) <= 15.625 * BusClock. At 66.666MHz, PSRT=31 and PTP=32 - * appear to be reasonable. - */ - -#ifdef DEBUG -#define CONFIG_SYS_PSRT 39 -#define CONFIG_SYS_MPTPR MPTPR_PTP_DIV8 -#else -#define CONFIG_SYS_PSRT 31 -#define CONFIG_SYS_MPTPR MPTPR_PTP_DIV32 -#endif - -/* - * Banks 3,4,5 and 6 - FPGA access - * - * Quotes from the HYMOD IO Board Reference manual: - * - * "The IO Board is fitted with a Xilinx XCV300E main FPGA. Provision is made - * for configuring an optional FPGA on the mezzanine interface. - * - * Access to the FPGAs may be divided into several catagories: - * - * 1. Configuration - * 2. Register mode access - * 3. Port mode access - * - * The main FPGA is supported for modes 1, 2 and 3. The mezzanine FPGA can be - * configured only (mode 1). Consequently there are four access types. - * - * To improve interface performance and simplify software design, the four - * possible access types are separately mapped to different memory banks. - * - * All are accessed using the local bus." - * - * Device Mode Memory Bank Machine Port Size Access - * - * Main Configuration 3 UPMC 8bit R/W - * Main Register 4 GPCM 32bit R/W - * Main Port 5 UPMB 32bit R/W - * Mezzanine Configuration 6 UPMC 8bit W/O - * - * "Note that mezzanine mode 1 access is write-only." - */ - -/* all the bank sizes must be a power of two, greater or equal to 32768 */ -#define FPGA_MAIN_CFG_BASE (CONFIG_SYS_FPGA_BASE) -#define FPGA_MAIN_CFG_SIZE 32768 -#define FPGA_MAIN_REG_BASE (FPGA_MAIN_CFG_BASE + FPGA_MAIN_CFG_SIZE) -#define FPGA_MAIN_REG_SIZE 32768 -#define FPGA_MAIN_PORT_BASE (FPGA_MAIN_REG_BASE + FPGA_MAIN_REG_SIZE) -#define FPGA_MAIN_PORT_SIZE 32768 -#define FPGA_MEZZ_CFG_BASE (FPGA_MAIN_PORT_BASE + FPGA_MAIN_PORT_SIZE) -#define FPGA_MEZZ_CFG_SIZE 32768 - -/* 8 bit, read-write, UPMC */ -#define CONFIG_SYS_BR3_PRELIM (FPGA_MAIN_CFG_BASE|BRx_PS_8|BRx_MS_UPMC|BRx_V) -/* up to 32Kbyte, burst inhibit */ -#define CONFIG_SYS_OR3_PRELIM (P2SZ_TO_AM(FPGA_MAIN_CFG_SIZE)|ORxU_BI) - -/* 32 bit, read-write, GPCM */ -#define CONFIG_SYS_BR4_PRELIM (FPGA_MAIN_REG_BASE|BRx_PS_32|BRx_MS_GPCM_L|BRx_V) -/* up to 32Kbyte */ -#define CONFIG_SYS_OR4_PRELIM (P2SZ_TO_AM(FPGA_MAIN_REG_SIZE)) - -/* 32 bit, read-write, UPMB */ -#define CONFIG_SYS_BR5_PRELIM (FPGA_MAIN_PORT_BASE|BRx_PS_32|BRx_MS_UPMB|BRx_V) -/* up to 32Kbyte */ -#define CONFIG_SYS_OR5_PRELIM (P2SZ_TO_AM(FPGA_MAIN_PORT_SIZE)|ORxU_BI) - -/* 8 bit, write-only, UPMC */ -#define CONFIG_SYS_BR6_PRELIM (FPGA_MEZZ_CFG_BASE|BRx_PS_8|BRx_MS_UPMC|BRx_V) -/* up to 32Kbyte, burst inhibit */ -#define CONFIG_SYS_OR6_PRELIM (P2SZ_TO_AM(FPGA_MEZZ_CFG_SIZE)|ORxU_BI) - -/*----------------------------------------------------------------------- - * MBMR - Machine B Mode 10-27 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_MBMR (MxMR_BSEL|MxMR_OP_NORM) /* XXX - needs more */ - -/*----------------------------------------------------------------------- - * MCMR - Machine C Mode 10-27 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_MCMR (MxMR_BSEL|MxMR_DSx_2_CYCL) /* XXX - needs more */ - -/* - * FPGA I/O Port/Bit information - */ - -#define FPGA_MAIN_PROG_PORT IOPIN_PORTA -#define FPGA_MAIN_PROG_PIN 4 /* PA4 */ -#define FPGA_MAIN_INIT_PORT IOPIN_PORTA -#define FPGA_MAIN_INIT_PIN 5 /* PA5 */ -#define FPGA_MAIN_DONE_PORT IOPIN_PORTA -#define FPGA_MAIN_DONE_PIN 6 /* PA6 */ - -#define FPGA_MEZZ_PROG_PORT IOPIN_PORTA -#define FPGA_MEZZ_PROG_PIN 0 /* PA0 */ -#define FPGA_MEZZ_INIT_PORT IOPIN_PORTA -#define FPGA_MEZZ_INIT_PIN 1 /* PA1 */ -#define FPGA_MEZZ_DONE_PORT IOPIN_PORTA -#define FPGA_MEZZ_DONE_PIN 2 /* PA2 */ -#define FPGA_MEZZ_ENABLE_PORT IOPIN_PORTA -#define FPGA_MEZZ_ENABLE_PIN 3 /* PA3 */ - -/* - * FPGA Interrupt configuration - */ -#define FPGA_MAIN_IRQ SIU_INT_IRQ2 - -/* - * JFFS2 partitions - * - */ -/* No command line, one static partition, whole device */ -#undef CONFIG_CMD_MTDPARTS -#define CONFIG_JFFS2_DEV "nor0" -#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF -#define CONFIG_JFFS2_PART_OFFSET 0x00000000 - -/* mtdparts command line support */ -/* -#define CONFIG_CMD_MTDPARTS -#define MTDIDS_DEFAULT "" -#define MTDPARTS_DEFAULT "" -*/ - -#endif /* __CONFIG_H */ |
