diff options
Diffstat (limited to 'include/configs/eXalion.h')
| -rw-r--r-- | include/configs/eXalion.h | 286 |
1 files changed, 143 insertions, 143 deletions
diff --git a/include/configs/eXalion.h b/include/configs/eXalion.h index ecf4c5e0b9..fc3174c63f 100644 --- a/include/configs/eXalion.h +++ b/include/configs/eXalion.h @@ -84,53 +84,53 @@ /*----------------------------------------------------------------------- * Miscellaneous configurable options */ -#define CFG_LONGHELP 1 /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 8 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_LOAD_ADDR 0x00100000 /* default load address */ +#define CONFIG_SYS_LONGHELP 1 /* undef to save memory */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 8 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_MISC_INIT_R 1 /*----------------------------------------------------------------------- * Start addresses for the final memory configuration * (Set up by the startup code) - * Please note that CFG_SDRAM_BASE _must_ start at 0 + * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 */ -#define CFG_SDRAM_BASE 0x00000000 -#define CFG_MAX_RAM_SIZE 0x10000000 /* 1 GBytes - initdram() will */ +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_MAX_RAM_SIZE 0x10000000 /* 1 GBytes - initdram() will */ /* return real value. */ -#define CFG_RESET_ADDRESS 0xFFF00100 +#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 -#undef CFG_RAMBOOT -#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CFG_MONITOR_BASE TEXT_BASE +#undef CONFIG_SYS_RAMBOOT +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area */ -#define CFG_INIT_DATA_SIZE 128 +#define CONFIG_SYS_INIT_DATA_SIZE 128 -#define CFG_INIT_RAM_ADDR 0x40000000 -#define CFG_INIT_RAM_END 0x1000 -#define CFG_INIT_DATA_OFFSET (CFG_INIT_RAM_END - CFG_INIT_DATA_SIZE) +#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 +#define CONFIG_SYS_INIT_RAM_END 0x1000 +#define CONFIG_SYS_INIT_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_INIT_DATA_SIZE) -#define CFG_GBL_DATA_SIZE 256 /* size in bytes reserved for initial data */ -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET +#define CONFIG_SYS_GBL_DATA_SIZE 256 /* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #if defined (CONFIG_MPC8240) -#define CFG_FLASH_BASE 0xFFE00000 -#define CFG_FLASH_SIZE (2 * 1024 * 1024) /* onboard 2MByte flash */ +#define CONFIG_SYS_FLASH_BASE 0xFFE00000 +#define CONFIG_SYS_FLASH_SIZE (2 * 1024 * 1024) /* onboard 2MByte flash */ #elif defined (CONFIG_MPC8245) -#define CFG_FLASH_BASE 0xFFC00000 -#define CFG_FLASH_SIZE (4 * 1024 * 1024) /* onboard 4MByte flash */ +#define CONFIG_SYS_FLASH_BASE 0xFFC00000 +#define CONFIG_SYS_FLASH_SIZE (4 * 1024 * 1024) /* onboard 4MByte flash */ #else #error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240) #endif @@ -141,27 +141,27 @@ #define CONFIG_ENV_ADDR 0xFFFC0000 #define CONFIG_ENV_OFFSET 0 /* starting right at the beginning */ -#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */ +#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */ -#define CFG_ALT_MEMTEST 1 /* use real memory test */ -#define CFG_MEMTEST_START 0x00004000 /* memtest works on */ -#define CFG_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */ +#define CONFIG_SYS_ALT_MEMTEST 1 /* use real memory test */ +#define CONFIG_SYS_MEMTEST_START 0x00004000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */ -#define CFG_EUMB_ADDR 0xFC000000 +#define CONFIG_SYS_EUMB_ADDR 0xFC000000 -/* #define CFG_ISA_MEM 0xFD000000 */ -#define CFG_ISA_IO 0xFE000000 +/* #define CONFIG_SYS_ISA_MEM 0xFD000000 */ +#define CONFIG_SYS_ISA_IO 0xFE000000 /*----------------------------------------------------------------------- * FLASH organization */ -#define CFG_MAX_FLASH_BANKS 1 /* Max number of flash banks */ -#define CFG_MAX_FLASH_SECT 64 /* Max number of sectors per flash */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max number of flash banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 64 /* Max number of sectors per flash */ -#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ -#define FLASH_BASE0_PRELIM CFG_FLASH_BASE +#define FLASH_BASE0_PRELIM CONFIG_SYS_FLASH_BASE #define FLASH_BASE1_PRELIM 0 @@ -169,13 +169,13 @@ * FLASH and environment organization */ -#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */ #define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */ -#define CFG_MAX_FLASH_SECT 64 /* max number of sectors on one chip */ -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_FLASH_INCREMENT 0 /* there is only one bank */ -#define CFG_FLASH_PROTECTION 1 /* use hardware protection */ -#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ +#define CONFIG_SYS_MAX_FLASH_SECT 64 /* max number of sectors on one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CONFIG_SYS_FLASH_INCREMENT 0 /* there is only one bank */ +#define CONFIG_SYS_FLASH_PROTECTION 1 /* use hardware protection */ +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ /*----------------------------------------------------------------------- @@ -200,23 +200,23 @@ /*----------------------------------------------------------------------- * NS16550 Configuration */ -#define CFG_NS16550 1 -#define CFG_NS16550_SERIAL 1 +#define CONFIG_SYS_NS16550 1 +#define CONFIG_SYS_NS16550_SERIAL 1 #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 38400 -#define CFG_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_REG_SIZE 1 #if (CONFIG_CONS_INDEX == 1) -#define CFG_NS16550_CLK 1843200 /* COM1 only ! */ +#define CONFIG_SYS_NS16550_CLK 1843200 /* COM1 only ! */ #else -#define CFG_NS16550_CLK ({ extern ulong get_bus_freq (ulong); get_bus_freq (0); }) +#define CONFIG_SYS_NS16550_CLK ({ extern ulong get_bus_freq (ulong); get_bus_freq (0); }) #endif -#define CFG_NS16550_COM1 (CFG_ISA_IO + 0x3F8) -#define CFG_NS16550_COM2 (CFG_EUMB_ADDR + 0x4500) -#define CFG_NS16550_COM3 (CFG_EUMB_ADDR + 0x4600) +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_ISA_IO + 0x3F8) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_EUMB_ADDR + 0x4500) +#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_EUMB_ADDR + 0x4600) /*----------------------------------------------------------------------- * select i2c support configuration @@ -227,15 +227,15 @@ */ #define CONFIG_HARD_I2C 1 /* To enable I2C support */ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ -#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CFG_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_SLAVE 0x7F /*----------------------------------------------------------------------- * Low Level Configuration Settings * (address mappings, register initial values, etc.) * You should know what you are doing if you make changes here. */ -#define CFG_HZ 1000 +#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ #define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER 2 /* for MPC8240 only */ @@ -245,76 +245,76 @@ #if defined (CONFIG_MPC8245) /* Bit-field values for PMCR2. */ #if defined (CONFIG_133MHZ_DRAM) -#define CFG_DLL_EXTEND 0x80 /* use DLL extended range - 133MHz only */ -#define CFG_PCI_HOLD_DEL 0x20 /* delay and hold timing - 133MHz only */ +#define CONFIG_SYS_DLL_EXTEND 0x80 /* use DLL extended range - 133MHz only */ +#define CONFIG_SYS_PCI_HOLD_DEL 0x20 /* delay and hold timing - 133MHz only */ #endif /* Bit-field values for MIOCR1. */ #if !defined (CONFIG_133MHZ_DRAM) -#define CFG_DLL_MAX_DELAY 0x04 /* longer DLL delay line - 66MHz only */ +#define CONFIG_SYS_DLL_MAX_DELAY 0x04 /* longer DLL delay line - 66MHz only */ #endif /* Bit-field values for MIOCR2. */ -#define CFG_SDRAM_DSCD 0x20 /* SDRAM data in sample clock delay */ +#define CONFIG_SYS_SDRAM_DSCD 0x20 /* SDRAM data in sample clock delay */ /* - note bottom 3 bits MUST be 0 */ #endif /* Bit-field values for MCCR1. */ -#define CFG_ROMNAL 7 /*rom/flash next access time */ -#define CFG_ROMFAL 11 /*rom/flash access time */ +#define CONFIG_SYS_ROMNAL 7 /*rom/flash next access time */ +#define CONFIG_SYS_ROMFAL 11 /*rom/flash access time */ /* Bit-field values for MCCR2. */ -#define CFG_TSWAIT 0x5 /* Transaction Start Wait States timer */ +#define CONFIG_SYS_TSWAIT 0x5 /* Transaction Start Wait States timer */ #if defined (CONFIG_133MHZ_DRAM) -#define CFG_REFINT 1300 /* no of clock cycles between CBR */ +#define CONFIG_SYS_REFINT 1300 /* no of clock cycles between CBR */ #else /* refresh cycles */ -#define CFG_REFINT 750 +#define CONFIG_SYS_REFINT 750 #endif /* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. */ #if defined (CONFIG_133MHZ_DRAM) -#define CFG_BSTOPRE 1023 +#define CONFIG_SYS_BSTOPRE 1023 #else -#define CFG_BSTOPRE 250 +#define CONFIG_SYS_BSTOPRE 250 #endif /* Bit-field values for MCCR3. */ /* the following are for SDRAM only */ #if defined (CONFIG_133MHZ_DRAM) -#define CFG_REFREC 9 /* Refresh to activate interval */ +#define CONFIG_SYS_REFREC 9 /* Refresh to activate interval */ #else -#define CFG_REFREC 5 /* Refresh to activate interval */ +#define CONFIG_SYS_REFREC 5 /* Refresh to activate interval */ #endif #if defined (CONFIG_MPC8240) -#define CFG_RDLAT 2 /* data latency from read command */ +#define CONFIG_SYS_RDLAT 2 /* data latency from read command */ #endif /* Bit-field values for MCCR4. */ #if defined (CONFIG_133MHZ_DRAM) -#define CFG_PRETOACT 3 /* Precharge to activate interval */ -#define CFG_ACTTOPRE 7 /* Activate to Precharge interval */ -#define CFG_ACTORW 5 /* Activate to R/W */ -#define CFG_SDMODE_CAS_LAT 3 /* SDMODE CAS latency */ +#define CONFIG_SYS_PRETOACT 3 /* Precharge to activate interval */ +#define CONFIG_SYS_ACTTOPRE 7 /* Activate to Precharge interval */ +#define CONFIG_SYS_ACTORW 5 /* Activate to R/W */ +#define CONFIG_SYS_SDMODE_CAS_LAT 3 /* SDMODE CAS latency */ #else #if 0 -#define CFG_PRETOACT 2 /* Precharge to activate interval */ -#define CFG_ACTTOPRE 3 /* Activate to Precharge interval */ -#define CFG_ACTORW 3 /* Activate to R/W */ -#define CFG_SDMODE_CAS_LAT 2 /* SDMODE CAS latency */ +#define CONFIG_SYS_PRETOACT 2 /* Precharge to activate interval */ +#define CONFIG_SYS_ACTTOPRE 3 /* Activate to Precharge interval */ +#define CONFIG_SYS_ACTORW 3 /* Activate to R/W */ +#define CONFIG_SYS_SDMODE_CAS_LAT 2 /* SDMODE CAS latency */ #endif -#define CFG_PRETOACT 2 /* Precharge to activate interval */ -#define CFG_ACTTOPRE 5 /* Activate to Precharge interval */ -#define CFG_ACTORW 3 /* Activate to R/W */ -#define CFG_SDMODE_CAS_LAT 3 /* SDMODE CAS latency */ +#define CONFIG_SYS_PRETOACT 2 /* Precharge to activate interval */ +#define CONFIG_SYS_ACTTOPRE 5 /* Activate to Precharge interval */ +#define CONFIG_SYS_ACTORW 3 /* Activate to R/W */ +#define CONFIG_SYS_SDMODE_CAS_LAT 3 /* SDMODE CAS latency */ #endif -#define CFG_SDMODE_WRAP 0 /* SDMODE wrap type */ -#define CFG_SDMODE_BURSTLEN 2 /* SDMODE Burst length 2=4, 3=8 */ -#define CFG_REGDIMM 0 +#define CONFIG_SYS_SDMODE_WRAP 0 /* SDMODE wrap type */ +#define CONFIG_SYS_SDMODE_BURSTLEN 2 /* SDMODE Burst length 2=4, 3=8 */ +#define CONFIG_SYS_REGDIMM 0 #if defined (CONFIG_MPC8240) -#define CFG_REGISTERD_TYPE_BUFFER 0 +#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 0 #elif defined (CONFIG_MPC8245) -#define CFG_REGISTERD_TYPE_BUFFER 1 -#define CFG_EXTROM 0 +#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1 +#define CONFIG_SYS_EXTROM 0 #else #error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240) #endif @@ -327,51 +327,51 @@ * bits will be set to 0x00000 for a start address, or 0xfffff for an * end address */ -#define CFG_BANK0_START 0x00000000 -#define CFG_BANK0_END (CFG_MAX_RAM_SIZE - 1) -#define CFG_BANK0_ENABLE 1 -#define CFG_BANK1_START 0x3ff00000 -#define CFG_BANK1_END 0x3fffffff -#define CFG_BANK1_ENABLE 0 -#define CFG_BANK2_START 0x3ff00000 -#define CFG_BANK2_END 0x3fffffff -#define CFG_BANK2_ENABLE 0 -#define CFG_BANK3_START 0x3ff00000 -#define CFG_BANK3_END 0x3fffffff -#define CFG_BANK3_ENABLE 0 -#define CFG_BANK4_START 0x00000000 -#define CFG_BANK4_END 0x00000000 -#define CFG_BANK4_ENABLE 0 -#define CFG_BANK5_START 0x00000000 -#define CFG_BANK5_END 0x00000000 -#define CFG_BANK5_ENABLE 0 -#define CFG_BANK6_START 0x00000000 -#define CFG_BANK6_END 0x00000000 -#define CFG_BANK6_ENABLE 0 -#define CFG_BANK7_START 0x00000000 -#define CFG_BANK7_END 0x00000000 -#define CFG_BANK7_ENABLE 0 +#define CONFIG_SYS_BANK0_START 0x00000000 +#define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE - 1) +#define CONFIG_SYS_BANK0_ENABLE 1 +#define CONFIG_SYS_BANK1_START 0x3ff00000 +#define CONFIG_SYS_BANK1_END 0x3fffffff +#define CONFIG_SYS_BANK1_ENABLE 0 +#define CONFIG_SYS_BANK2_START 0x3ff00000 +#define CONFIG_SYS_BANK2_END 0x3fffffff +#define CONFIG_SYS_BANK2_ENABLE 0 +#define CONFIG_SYS_BANK3_START 0x3ff00000 +#define CONFIG_SYS_BANK3_END 0x3fffffff +#define CONFIG_SYS_BANK3_ENABLE 0 +#define CONFIG_SYS_BANK4_START 0x00000000 +#define CONFIG_SYS_BANK4_END 0x00000000 +#define CONFIG_SYS_BANK4_ENABLE 0 +#define CONFIG_SYS_BANK5_START 0x00000000 +#define CONFIG_SYS_BANK5_END 0x00000000 +#define CONFIG_SYS_BANK5_ENABLE 0 +#define CONFIG_SYS_BANK6_START 0x00000000 +#define CONFIG_SYS_BANK6_END 0x00000000 +#define CONFIG_SYS_BANK6_ENABLE 0 +#define CONFIG_SYS_BANK7_START 0x00000000 +#define CONFIG_SYS_BANK7_END 0x00000000 +#define CONFIG_SYS_BANK7_ENABLE 0 /*----------------------------------------------------------------------- * Memory bank enable bitmask, specifying which of the banks defined above are actually present. MSB is for bank #7, LSB is for bank #0. */ -#define CFG_BANK_ENABLE 0x01 +#define CONFIG_SYS_BANK_ENABLE 0x01 #if defined (CONFIG_MPC8240) -#define CFG_ODCR 0xDF /* configures line driver impedances, */ +#define CONFIG_SYS_ODCR 0xDF /* configures line driver impedances, */ /* see 8240 book for bit definitions */ #elif defined (CONFIG_MPC8245) #if defined (CONFIG_133MHZ_DRAM) -#define CFG_ODCR 0xFE /* configures line driver impedances - 133MHz */ +#define CONFIG_SYS_ODCR 0xFE /* configures line driver impedances - 133MHz */ #else -#define CFG_ODCR 0xDE /* configures line driver impedances - 66MHz */ +#define CONFIG_SYS_ODCR 0xDE /* configures line driver impedances - 66MHz */ #endif #else #error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240) #endif -#define CFG_PGMAX 0x32 /* how long the 8240 retains the */ +#define CONFIG_SYS_PGMAX 0x32 /* how long the 8240 retains the */ /* currently accessed page in memory */ /* see 8240 book for details */ @@ -379,37 +379,37 @@ * Block Address Translation (BAT) register settings. */ /* SDRAM 0 - 256MB */ -#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) /* stack in DCACHE @ 1GB (no backing mem) */ -#define CFG_IBAT1L (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CFG_IBAT1U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) /* PCI memory */ -#define CFG_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CFG_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT) +#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) /* Flash, config addrs, etc */ -#define CFG_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CFG_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT) +#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) -#define CFG_DBAT0L CFG_IBAT0L -#define CFG_DBAT0U CFG_IBAT0U -#define CFG_DBAT1L CFG_IBAT1L -#define CFG_DBAT1U CFG_IBAT1U -#define CFG_DBAT2L CFG_IBAT2L -#define CFG_DBAT2U CFG_IBAT2U -#define CFG_DBAT3L CFG_IBAT3L -#define CFG_DBAT3U CFG_IBAT3U +#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L +#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U +#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L +#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U +#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L +#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U +#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L +#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U /*----------------------------------------------------------------------- * Cache Configuration */ -#define CFG_CACHELINE_SIZE 32 +#define CONFIG_SYS_CACHELINE_SIZE 32 #if defined(CONFIG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -432,15 +432,15 @@ /*----------------------------------------------------------------------- * IDE/ATA stuff */ -#define CFG_IDE_MAXBUS 1 /* max. 2 IDE busses */ -#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*1) /* max. 2 drives per IDE bus */ +#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 2 IDE busses */ +#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS*1) /* max. 2 drives per IDE bus */ -#define CFG_ATA_BASE_ADDR CFG_ISA_IO /* base address */ -#define CFG_ATA_IDE0_OFFSET 0x01F0 /* ide0 offste */ -#define CFG_ATA_IDE1_OFFSET 0x0170 /* ide1 offset */ -#define CFG_ATA_DATA_OFFSET 0 /* data reg offset */ -#define CFG_ATA_REG_OFFSET 0 /* reg offset */ -#define CFG_ATA_ALT_OFFSET 0x200 /* alternate register offset */ +#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_ISA_IO /* base address */ +#define CONFIG_SYS_ATA_IDE0_OFFSET 0x01F0 /* ide0 offste */ +#define CONFIG_SYS_ATA_IDE1_OFFSET 0x0170 /* ide1 offset */ +#define CONFIG_SYS_ATA_DATA_OFFSET 0 /* data reg offset */ +#define CONFIG_SYS_ATA_REG_OFFSET 0 /* reg offset */ +#define CONFIG_SYS_ATA_ALT_OFFSET 0x200 /* alternate register offset */ #define CONFIG_ATAPI @@ -459,6 +459,6 @@ * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ #endif /* __CONFIG_H */ |
