summaryrefslogtreecommitdiffstats
path: root/include/configs/am335x_evm.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/am335x_evm.h')
-rw-r--r--include/configs/am335x_evm.h62
1 files changed, 50 insertions, 12 deletions
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index 26a3c964ba..2cea1f4612 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -16,7 +16,7 @@
#ifndef __CONFIG_AM335X_EVM_H
#define __CONFIG_AM335X_EVM_H
-#define CONFIG_AM335X
+#define CONFIG_AM33XX
#define CONFIG_CMD_MEMORY /* for mtest */
#undef CONFIG_GZIP
#undef CONFIG_ZLIB
@@ -26,11 +26,9 @@
#include <asm/arch/cpu.h>
#include <asm/arch/hardware.h>
-#define CONFIG_SETUP_PLL
-#define CONFIG_AM335X_CONFIG_DDR
#define CONFIG_ENV_SIZE 0x400
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (8 * 1024))
-#define CONFIG_SYS_PROMPT "AM335X# "
+#define CONFIG_SYS_PROMPT "U-Boot# "
#define CONFIG_SYS_NO_FLASH
#define MACH_TYPE_TIAM335EVM 3589 /* Until the next sync */
#define CONFIG_MACH_TYPE MACH_TYPE_TIAM335EVM
@@ -48,14 +46,12 @@
/* Clock Defines */
#define V_OSCK 24000000 /* Clock output from T2 */
-#define V_SCLK (V_OSCK >> 1)
+#define V_SCLK (V_OSCK)
-#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for
- initial data */
#define CONFIG_CMD_ECHO
/* max number of command args */
-#define CONFIG_SYS_MAXARGS 32
+#define CONFIG_SYS_MAXARGS 16
/* Console I/O Buffer Size */
#define CONFIG_SYS_CBSIZE 512
@@ -75,10 +71,17 @@
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START \
+ (8 * 1024 * 1024))
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */
#define CONFIG_SYS_HZ 1000 /* 1ms clock */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_OMAP_HSMMC
+#define CONFIG_CMD_MMC
+#define CONFIG_DOS_PARTITION
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
#define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */
@@ -89,7 +92,6 @@
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
GENERATED_GBL_DATA_SIZE)
/* Platform/Board specific defs */
-#define CONFIG_SYS_CLK_FREQ 24000000
#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
#define CONFIG_SYS_HZ 1000
@@ -100,7 +102,6 @@
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
#define CONFIG_SYS_NS16550_CLK (48000000)
#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */
-#define CONFIG_SYS_NS16550_COM4 0x481A6000 /* UART3 on IA BOard */
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE { 110, 300, 600, 1200, 2400, \
@@ -115,7 +116,44 @@
#define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_SYS_TEXT_BASE 0x402f0400
+/* Defines for SPL */
+#define CONFIG_SPL
+#define CONFIG_SPL_TEXT_BASE 0x402F0400
+#define CONFIG_SPL_MAX_SIZE (46 * 1024)
+#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
+
+#define CONFIG_SPL_BSS_START_ADDR 0x80000000
+#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
+
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
+#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
+#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_FAT_SUPPORT
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBDISK_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
+
+/*
+ * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
+ * 64 bytes before this address should be set aside for u-boot.img's
+ * header. That is 0x800FFFC0--0x80100000 should not be used for any
+ * other needs.
+ */
+#define CONFIG_SYS_TEXT_BASE 0x80800000
+#define CONFIG_SYS_SPL_MALLOC_START 0x80208000
+#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
+
+/* Since SPL did pll and ddr initialization for us,
+ * we don't need to do it twice.
+ */
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#endif
/* Unsupported features */
#undef CONFIG_USE_IRQ
OpenPOWER on IntegriCloud