summaryrefslogtreecommitdiffstats
path: root/include/configs/METROBOX.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/METROBOX.h')
-rw-r--r--include/configs/METROBOX.h130
1 files changed, 65 insertions, 65 deletions
diff --git a/include/configs/METROBOX.h b/include/configs/METROBOX.h
index 16d236388e..c0ddd45c0e 100644
--- a/include/configs/METROBOX.h
+++ b/include/configs/METROBOX.h
@@ -109,7 +109,7 @@
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
#define CONFIG_MISC_INIT_F 1 /* Call board misc_init_f */
#define CONFIG_MISC_INIT_R 1 /* Call board misc_init_r */
-#undef CFG_DRAM_TEST /* Disable-takes long time!*/
+#undef CONFIG_SYS_DRAM_TEST /* Disable-takes long time!*/
#define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */
#define CONFIG_VERY_BIG_RAM 1
@@ -121,34 +121,34 @@
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*----------------------------------------------------------------------*/
-#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
-#define CFG_FLASH_BASE 0xfff80000 /* start of FLASH */
-#define CFG_MONITOR_BASE 0xfff80000 /* start of monitor */
-#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */
-#define CFG_PERIPHERAL_BASE 0xe0000000 /* internal peripherals */
-#define CFG_ISRAM_BASE 0xc0000000 /* internal SRAM */
-#define CFG_PCI_BASE 0xd0000000 /* internal PCI regs */
-
-#define CFG_NVRAM_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x08000000)
-#define CFG_FPGA_BASE (CFG_PERIPHERAL_BASE + 0x08200000)
-#define CFG_BME32_BASE (CFG_PERIPHERAL_BASE + 0x08500000)
-#define CFG_GPIO_BASE (CFG_PERIPHERAL_BASE + 0x00000700)
+#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* _must_ be 0 */
+#define CONFIG_SYS_FLASH_BASE 0xfff80000 /* start of FLASH */
+#define CONFIG_SYS_MONITOR_BASE 0xfff80000 /* start of monitor */
+#define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */
+#define CONFIG_SYS_PERIPHERAL_BASE 0xe0000000 /* internal peripherals */
+#define CONFIG_SYS_ISRAM_BASE 0xc0000000 /* internal SRAM */
+#define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */
+
+#define CONFIG_SYS_NVRAM_BASE_ADDR (CONFIG_SYS_PERIPHERAL_BASE + 0x08000000)
+#define CONFIG_SYS_FPGA_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x08200000)
+#define CONFIG_SYS_BME32_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x08500000)
+#define CONFIG_SYS_GPIO_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000700)
/*-----------------------------------------------------------------------
* Initial RAM & stack pointer (placed in internal SRAM)
*----------------------------------------------------------------------*/
-#define CFG_TEMP_STACK_OCM 1
-#define CFG_OCM_DATA_ADDR CFG_ISRAM_BASE
-#define CFG_INIT_RAM_ADDR CFG_ISRAM_BASE /* Initial RAM address */
-#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */
-#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
+#define CONFIG_SYS_TEMP_STACK_OCM 1
+#define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE
+#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */
+#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4)
-#define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_POST_WORD_ADDR
-#define CFG_MONITOR_LEN (256 * 1024) /* Rsrv 256kB for Mon */
-#define CFG_MALLOC_LEN (128 * 1024) /* Rsrv 128kB for malloc */
+#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Rsrv 256kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Rsrv 128kB for malloc */
/*-----------------------------------------------------------------------
* Serial Port
@@ -157,7 +157,7 @@
#define CONFIG_SERIAL_MULTI 1
#define CONFIG_BAUDRATE 9600
-#define CFG_BAUDRATE_TABLE \
+#define CONFIG_SYS_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
/*-----------------------------------------------------------------------
@@ -167,21 +167,21 @@
* The DS1743 code assumes this condition (i.e. -- it assumes the base
* address for the RTC registers is:
*
- * CFG_NVRAM_BASE_ADDR + CFG_NVRAM_SIZE
+ * CONFIG_SYS_NVRAM_BASE_ADDR + CONFIG_SYS_NVRAM_SIZE
*
*----------------------------------------------------------------------*/
-#define CFG_NVRAM_SIZE (0x2000 - 8) /* NVRAM size(8k)- RTC regs*/
+#define CONFIG_SYS_NVRAM_SIZE (0x2000 - 8) /* NVRAM size(8k)- RTC regs*/
#define CONFIG_RTC_DS174x 1 /* DS1743 RTC */
/*-----------------------------------------------------------------------
* FLASH related
*----------------------------------------------------------------------*/
-#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
-#define CFG_MAX_FLASH_SECT 8 /* sectors per device */
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 8 /* sectors per device */
-#undef CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT 120000 /* Flash Erase TO (in ms) */
-#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write TO(in ms) */
+#undef CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Flash Erase TO (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write TO(in ms) */
/*-----------------------------------------------------------------------
* DDR SDRAM
@@ -194,9 +194,9 @@
*----------------------------------------------------------------------*/
#define CONFIG_HARD_I2C 1 /* I2C hardware support */
#undef CONFIG_SOFT_I2C /* I2C !bit-banged */
-#define CFG_I2C_SPEED 400000 /* I2C speed 400kHz */
-#define CFG_I2C_SLAVE 0x7F /* I2C slave address */
-#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
+#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed 400kHz */
+#define CONFIG_SYS_I2C_SLAVE 0x7F /* I2C slave address */
+#define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */
#define CONFIG_I2C_BUS1 1 /* Include i2c bus 1 supp */
@@ -209,14 +209,14 @@
#define CONFIG_ENV_OVERWRITE 1 /* allow env overwrite */
#define CONFIG_ENV_SIZE 0x1000 /* Size of Env vars */
-#define CONFIG_ENV_ADDR (CFG_NVRAM_BASE_ADDR)
+#define CONFIG_ENV_ADDR (CONFIG_SYS_NVRAM_BASE_ADDR)
#define CONFIG_BOOTARGS "console=ttyS0,9600 root=/dev/nfs rw nfsroot=$serverip:/home/metrobox0 nfsaddrs=$ipaddr:::::eth0:none "
#define CONFIG_BOOTCOMMAND "tftp 8000000 pImage.metrobox;bootm 8000000"
#define CONFIG_BOOTDELAY 5 /* disable autoboot */
#define CONFIG_LOADS_ECHO 1 /* echo on for serial dnld */
-#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
/*-----------------------------------------------------------------------
* Networking
@@ -239,7 +239,7 @@
#define CONFIG_NETMASK 255.255.0.0
#define CONFIG_ETHADDR 00:00:00:00:00:00 /* No EMAC 0 support */
#define CONFIG_ETH1ADDR 00:00:00:00:00:00 /* No EMAC 1 support */
-#define CFG_RX_ETH_BUFFER 32 /* #eth rx buff & descrs */
+#define CONFIG_SYS_RX_ETH_BUFFER 32 /* #eth rx buff & descrs */
/*
@@ -277,33 +277,33 @@
/* Include auto complete with tabs */
#define CONFIG_AUTO_COMPLETE 1
#define CONFIG_AUTO_COMPLETE 1
-#define CFG_ALT_MEMTEST 1 /* use real memory test */
+#define CONFIG_SYS_ALT_MEMTEST 1 /* use real memory test */
-#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "MetroBox=> " /* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "MetroBox=> " /* Monitor Command Prompt */
-#define CFG_HUSH_PARSER 1 /* HUSH for ext'd cli */
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_HUSH_PARSER 1 /* HUSH for ext'd cli */
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
/*-----------------------------------------------------------------------
* Console Buffer
*----------------------------------------------------------------------*/
#if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#else
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
/* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of cmd args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Arg Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of cmd args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */
/*-----------------------------------------------------------------------
* Memory Test
*----------------------------------------------------------------------*/
-#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
-#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
/*-----------------------------------------------------------------------
* Compact Flash (in true IDE mode)
@@ -312,16 +312,16 @@
#undef CONFIG_IDE_LED /* no led for ide supported */
#define CONFIG_IDE_RESET /* reset for ide supported */
-#define CFG_IDE_MAXBUS 1 /* max. 1 IDE busses */
-#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
+#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE busses */
+#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
-#define CFG_ATA_BASE_ADDR 0xF0000000
-#define CFG_ATA_IDE0_OFFSET 0x0000
-#define CFG_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */
-#define CFG_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses*/
-#define CFG_ATA_ALT_OFFSET 0x100000 /* Offset for alternate registers */
+#define CONFIG_SYS_ATA_BASE_ADDR 0xF0000000
+#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
+#define CONFIG_SYS_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */
+#define CONFIG_SYS_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses*/
+#define CONFIG_SYS_ATA_ALT_OFFSET 0x100000 /* Offset for alternate registers */
-#define CFG_ATA_STRIDE 2 /* Directly connected CF, needs a stride
+#define CONFIG_SYS_ATA_STRIDE 2 /* Directly connected CF, needs a stride
to get to the correct offset */
#define CONFIG_DOS_PARTITION 1 /* Include dos partition */
@@ -332,20 +332,20 @@
#define CONFIG_PCI /* include pci support */
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CONFIG_PCI_SCAN_SHOW /* show pci devices */
-#define CFG_PCI_TARGBASE (CFG_PCI_MEMBASE)
+#define CONFIG_SYS_PCI_TARGBASE (CONFIG_SYS_PCI_MEMBASE)
/* Board-specific PCI */
-#define CFG_PCI_TARGET_INIT /* let board init pci target*/
+#define CONFIG_SYS_PCI_TARGET_INIT /* let board init pci target*/
-#define CFG_PCI_SUBSYS_VENDORID 0x17BA /* Sandburst */
-#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x17BA /* Sandburst */
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
-#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*
* Internal Definitions
@@ -364,10 +364,10 @@
* Miscellaneous configurable options
*----------------------------------------------------------------------*/
#undef CONFIG_WATCHDOG /* watchdog disabled */
-#define CFG_LOAD_ADDR 0x8000000 /* default load address */
-#define CFG_EXTBDINFO 1 /* use extended board_info */
+#define CONFIG_SYS_LOAD_ADDR 0x8000000 /* default load address */
+#define CONFIG_SYS_EXTBDINFO 1 /* use extended board_info */
-#define CFG_HZ 100 /* decr freq: 1 ms ticks */
+#define CONFIG_SYS_HZ 100 /* decr freq: 1 ms ticks */
#endif /* __CONFIG_H */
OpenPOWER on IntegriCloud