diff options
Diffstat (limited to 'include/configs/ISPAN.h')
| -rw-r--r-- | include/configs/ISPAN.h | 176 |
1 files changed, 88 insertions, 88 deletions
diff --git a/include/configs/ISPAN.h b/include/configs/ISPAN.h index 8b6f3ce052..6eb466a725 100644 --- a/include/configs/ISPAN.h +++ b/include/configs/ISPAN.h @@ -69,14 +69,14 @@ #if CONFIG_ETHER_INDEX == 3 -#define CFG_PHY_ADDR 0 -#define CFG_CMXFCR_VALUE (CMXFCR_RF3CS_CLK14 | CMXFCR_TF3CS_CLK16) -#define CFG_CMXFCR_MASK (CMXFCR_FC3 | CMXFCR_RF3CS_MSK | CMXFCR_TF3CS_MSK) +#define CONFIG_SYS_PHY_ADDR 0 +#define CONFIG_SYS_CMXFCR_VALUE (CMXFCR_RF3CS_CLK14 | CMXFCR_TF3CS_CLK16) +#define CONFIG_SYS_CMXFCR_MASK (CMXFCR_FC3 | CMXFCR_RF3CS_MSK | CMXFCR_TF3CS_MSK) #endif /* CONFIG_ETHER_INDEX == 3 */ -#define CFG_CPMFCR_RAMTYPE 0 -#define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) +#define CONFIG_SYS_CPMFCR_RAMTYPE 0 +#define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) #define CONFIG_MII /* MII PHY management */ #define CONFIG_BITBANGMII /* Bit-bang MII PHY management */ @@ -85,18 +85,18 @@ */ #define MDIO_PORT 3 /* Port D */ -#define CFG_MDIO_PIN 0x00040000 /* PD13 */ -#define CFG_MDC_PIN 0x00080000 /* PD12 */ +#define CONFIG_SYS_MDIO_PIN 0x00040000 /* PD13 */ +#define CONFIG_SYS_MDC_PIN 0x00080000 /* PD12 */ -#define MDIO_ACTIVE (iop->pdir |= CFG_MDIO_PIN) -#define MDIO_TRISTATE (iop->pdir &= ~CFG_MDIO_PIN) -#define MDIO_READ ((iop->pdat & CFG_MDIO_PIN) != 0) +#define MDIO_ACTIVE (iop->pdir |= CONFIG_SYS_MDIO_PIN) +#define MDIO_TRISTATE (iop->pdir &= ~CONFIG_SYS_MDIO_PIN) +#define MDIO_READ ((iop->pdat & CONFIG_SYS_MDIO_PIN) != 0) -#define MDIO(bit) if(bit) iop->pdat |= CFG_MDIO_PIN; \ - else iop->pdat &= ~CFG_MDIO_PIN +#define MDIO(bit) if(bit) iop->pdat |= CONFIG_SYS_MDIO_PIN; \ + else iop->pdat &= ~CONFIG_SYS_MDIO_PIN -#define MDC(bit) if(bit) iop->pdat |= CFG_MDC_PIN; \ - else iop->pdat &= ~CFG_MDC_PIN +#define MDC(bit) if(bit) iop->pdat |= CONFIG_SYS_MDC_PIN; \ + else iop->pdat &= ~CONFIG_SYS_MDC_PIN #define MIIDELAY udelay(1) @@ -138,25 +138,25 @@ /*----------------------------------------------------------------------- * Miscellaneous configurable options */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#define CFG_HUSH_PARSER -#define CFG_PROMPT_HUSH_PS2 "> " -#define CFG_LONGHELP /* #undef to save memory */ -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* Max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_LONGHELP /* #undef to save memory */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* Max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ -#define CFG_MEMTEST_END 0x03B00000 /* 1 ... 59 MB in SDRAM */ +#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x03B00000 /* 1 ... 59 MB in SDRAM */ -#define CFG_LOAD_ADDR 0x100000 /* Default load address */ +#define CONFIG_SYS_LOAD_ADDR 0x100000 /* Default load address */ -#define CFG_HZ 1000 /* Decrementer freq: 1 ms ticks */ +#define CONFIG_SYS_HZ 1000 /* Decrementer freq: 1 ms ticks */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -#define CFG_RESET_ADDRESS 0x09900000 +#define CONFIG_SYS_RESET_ADDRESS 0x09900000 #define CONFIG_MISC_INIT_R /* We need misc_init_r() */ @@ -165,70 +165,70 @@ * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -#define CFG_MONITOR_BASE TEXT_BASE -#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE +#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ #ifdef CONFIG_BZIP2 -#define CFG_MALLOC_LEN (4096 << 10) /* Reserve 4 MB for malloc() */ +#define CONFIG_SYS_MALLOC_LEN (4096 << 10) /* Reserve 4 MB for malloc() */ #else -#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 KB for malloc() */ +#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 KB for malloc() */ #endif /* CONFIG_BZIP2 */ /*----------------------------------------------------------------------- * FLASH organization */ -#define CFG_FLASH_BASE 0xFE000000 -#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CONFIG_SYS_FLASH_BASE 0xFE000000 +#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ #define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ -#define CFG_MAX_FLASH_BANKS 1 /* Max num of memory banks */ -#define CFG_MAX_FLASH_SECT 142 /* Max num of sects on one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max num of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 142 /* Max num of sects on one chip */ /* Environment is in flash, there is little space left in Serial EEPROM */ #define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_SECT_SIZE 0x10000 /* We use one complete sector */ #define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) #define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) /*----------------------------------------------------------------------- * Hard Reset Configuration Words * - * If you change bits in the HRCW, you must also change the CFG_* + * If you change bits in the HRCW, you must also change the CONFIG_SYS_* * defines for the various registers affected by the HRCW e.g. changing - * HRCW_DPPCxx requires you to also change CFG_SIUMCR. + * HRCW_DPPCxx requires you to also change CONFIG_SYS_SIUMCR. */ /* 0x1686B245 */ -#define CFG_HRCW_MASTER (HRCW_EBM | HRCW_BPS01 | HRCW_CIP |\ +#define CONFIG_SYS_HRCW_MASTER (HRCW_EBM | HRCW_BPS01 | HRCW_CIP |\ HRCW_L2CPC10 | HRCW_ISB110 |\ HRCW_BMS | HRCW_MMR11 | HRCW_APPC10 |\ HRCW_CS10PC01 | HRCW_MODCK_H0101 \ ) /* No slaves */ -#define CFG_HRCW_SLAVE1 0 -#define CFG_HRCW_SLAVE2 0 -#define CFG_HRCW_SLAVE3 0 -#define CFG_HRCW_SLAVE4 0 -#define CFG_HRCW_SLAVE5 0 -#define CFG_HRCW_SLAVE6 0 -#define CFG_HRCW_SLAVE7 0 +#define CONFIG_SYS_HRCW_SLAVE1 0 +#define CONFIG_SYS_HRCW_SLAVE2 0 +#define CONFIG_SYS_HRCW_SLAVE3 0 +#define CONFIG_SYS_HRCW_SLAVE4 0 +#define CONFIG_SYS_HRCW_SLAVE5 0 +#define CONFIG_SYS_HRCW_SLAVE6 0 +#define CONFIG_SYS_HRCW_SLAVE7 0 /*----------------------------------------------------------------------- * Internal Memory Mapped Register */ -#define CFG_IMMR 0xF0F00000 -#ifdef CFG_REV_B -#define CFG_DEFAULT_IMMR 0xFF000000 -#endif /* CFG_REV_B */ +#define CONFIG_SYS_IMMR 0xF0F00000 +#ifdef CONFIG_SYS_REV_B +#define CONFIG_SYS_DEFAULT_IMMR 0xFF000000 +#endif /* CONFIG_SYS_REV_B */ /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in DPRAM) */ -#define CFG_INIT_RAM_ADDR CFG_IMMR -#define CFG_INIT_RAM_END 0x4000 /* End of used area in DPRAM */ -#define CFG_GBL_DATA_SIZE 128 /* Size in bytes reserved for initial data */ -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET +#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR +#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in DPRAM */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- * Internal Definitions @@ -241,7 +241,7 @@ /*----------------------------------------------------------------------- * Cache Configuration */ -#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ +#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPU */ /*----------------------------------------------------------------------- * HIDx - Hardware Implementation-dependent Registers 2-11 @@ -250,29 +250,29 @@ * * HID1 has only read-only information - nothing to set. */ -#define CFG_HID0_INIT (HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\ +#define CONFIG_SYS_HID0_INIT (HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\ HID0_IFEM|HID0_ABE) -#define CFG_HID0_FINAL (HID0_ICE|HID0_IFEM|HID0_ABE) -#define CFG_HID2 0 +#define CONFIG_SYS_HID0_FINAL (HID0_ICE|HID0_IFEM|HID0_ABE) +#define CONFIG_SYS_HID2 0 /*----------------------------------------------------------------------- * RMR - Reset Mode Register 5-5 *----------------------------------------------------------------------- * turn on Checkstop Reset Enable */ -#define CFG_RMR RMR_CSRE +#define CONFIG_SYS_RMR RMR_CSRE /*----------------------------------------------------------------------- * BCR - Bus Configuration 4-25 *----------------------------------------------------------------------- */ -#define CFG_BCR 0xA01C0000 +#define CONFIG_SYS_BCR 0xA01C0000 /*----------------------------------------------------------------------- * SIUMCR - SIU Module Configuration 4-31 *----------------------------------------------------------------------- */ -#define CFG_SIUMCR 0x42250000/* 0x4205C000 */ +#define CONFIG_SYS_SIUMCR 0x42250000/* 0x4205C000 */ /*----------------------------------------------------------------------- * SYPCR - System Protection Control 4-35 @@ -281,10 +281,10 @@ * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable */ #if defined (CONFIG_WATCHDOG) -#define CFG_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\ +#define CONFIG_SYS_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\ SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE) #else -#define CFG_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\ +#define CONFIG_SYS_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\ SYPCR_SWRI|SYPCR_SWP) #endif /* CONFIG_WATCHDOG */ @@ -294,7 +294,7 @@ * and enable Time Counter *----------------------------------------------------------------------- */ -#define CFG_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE) +#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE) /*----------------------------------------------------------------------- * PISCR - Periodic Interrupt Status and Control 4-42 @@ -302,20 +302,20 @@ * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable * Periodic timer */ -#define CFG_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE) +#define CONFIG_SYS_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE) /*----------------------------------------------------------------------- * SCCR - System Clock Control 9-8 *----------------------------------------------------------------------- * Ensure DFBRG is Divide by 16 */ -#define CFG_SCCR SCCR_DFBRG01 +#define CONFIG_SYS_SCCR SCCR_DFBRG01 /*----------------------------------------------------------------------- * RCCR - RISC Controller Configuration 13-7 *----------------------------------------------------------------------- */ -#define CFG_RCCR 0 +#define CONFIG_SYS_RCCR 0 /*----------------------------------------------------------------------- * Init Memory Controller: @@ -326,31 +326,31 @@ * 1 60x SDRAM 64 bit SDRAM * 2 Local SDRAM 32 bit SDRAM */ -#define CFG_USE_FIRMWARE /* If defined - do not initialise memory +#define CONFIG_SYS_USE_FIRMWARE /* If defined - do not initialise memory controller, rely on initialisation performed by the Interphase boot firmware. */ -#define CFG_OR0_PRELIM 0xFE000882 -#ifdef CFG_REV_B -#define CFG_BR0_PRELIM (CFG_FLASH_BASE | BRx_PS_8 | BRx_V) +#define CONFIG_SYS_OR0_PRELIM 0xFE000882 +#ifdef CONFIG_SYS_REV_B +#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | BRx_PS_8 | BRx_V) #else /* Rev. D */ -#define CFG_BR0_PRELIM (CFG_FLASH_BASE | BRx_PS_16 | BRx_V) -#endif /* CFG_REV_B */ +#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | BRx_PS_16 | BRx_V) +#endif /* CONFIG_SYS_REV_B */ -#define CFG_MPTPR 0x7F00 +#define CONFIG_SYS_MPTPR 0x7F00 /* Please note that 60x SDRAM MUST start at 0 */ -#define CFG_SDRAM_BASE 0x00000000 -#define CFG_60x_BR 0x00000041 -#define CFG_60x_OR 0xF0002CD0 -#define CFG_PSDMR 0x0049929A -#define CFG_PSRT 0x07 - -#define CFG_LSDRAM_BASE 0xF7000000 -#define CFG_LOC_BR 0x00001861 -#define CFG_LOC_OR 0xFF803280 -#define CFG_LSDMR 0x8285A552 -#define CFG_LSRT 0x07 +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_60x_BR 0x00000041 +#define CONFIG_SYS_60x_OR 0xF0002CD0 +#define CONFIG_SYS_PSDMR 0x0049929A +#define CONFIG_SYS_PSRT 0x07 + +#define CONFIG_SYS_LSDRAM_BASE 0xF7000000 +#define CONFIG_SYS_LOC_BR 0x00001861 +#define CONFIG_SYS_LOC_OR 0xFF803280 +#define CONFIG_SYS_LSDMR 0x8285A552 +#define CONFIG_SYS_LSRT 0x07 #endif /* __CONFIG_H */ |
