diff options
Diffstat (limited to 'examples/standalone/README.smc91111_eeprom')
| -rw-r--r-- | examples/standalone/README.smc91111_eeprom | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/examples/standalone/README.smc91111_eeprom b/examples/standalone/README.smc91111_eeprom index f73a8d3a58..0d8bc63f32 100644 --- a/examples/standalone/README.smc91111_eeprom +++ b/examples/standalone/README.smc91111_eeprom @@ -7,14 +7,14 @@ EEPROMs. Contents: ------------------------ -1. Ensuring U-boot's MAC address can be set in hardware +1. Ensuring U-Boot's MAC address can be set in hardware 2. Running the smc91111_eeprom program 3. Setting MAC addresses 4. Other things you can do with this 5. Things to be done. -1. Ensuring U-boot's MAC address can be set in hardware +1. Ensuring U-Boot's MAC address can be set in hardware -------------------------------------------------------------------------- On the Internet - MAC addresses are very important. Short for Media @@ -130,14 +130,14 @@ SMC91111> The MAC address can be stored in four locations: -Boot environmental variable in Flash <- can not change, without - re-flashing U-boot. + re-flashing U-Boot. U-Boot environmental variable <- can not change, without resetting board/U-Boot LAN91C111 Registers <- volatile LAN91C111 EEPROM <- Non-volatile If you have not activated the network, and do not have a hardcoded -or pre-assigned MAC address in U-boot, the environmental variables +or pre-assigned MAC address in U-Boot, the environmental variables should be blank, and allow you to set things one time. To set the EEPROM MAC address to 12:34:56:78:9A:BC |
