summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/gpio/s5p_gpio.c6
-rw-r--r--drivers/input/tegra-kbc.c18
-rw-r--r--drivers/misc/Makefile1
-rw-r--r--drivers/misc/pmic_max77686.c42
-rw-r--r--drivers/mmc/tegra_mmc.c7
-rw-r--r--drivers/serial/s3c64xx.c3
-rw-r--r--drivers/sound/Makefile48
-rw-r--r--drivers/sound/samsung-i2s.c358
-rw-r--r--drivers/sound/sound.c228
-rw-r--r--drivers/sound/wm8994.c792
-rw-r--r--drivers/sound/wm8994.h87
-rw-r--r--drivers/sound/wm8994_registers.h299
-rw-r--r--drivers/spi/Makefile1
-rw-r--r--drivers/spi/exynos_spi.c367
-rw-r--r--drivers/video/Makefile2
-rw-r--r--drivers/video/exynos_fb.c15
-rw-r--r--drivers/video/ld9040.c144
-rw-r--r--drivers/video/tegra.c379
-rw-r--r--drivers/watchdog/Makefile1
-rw-r--r--drivers/watchdog/s5p_wdt.c59
20 files changed, 2848 insertions, 9 deletions
diff --git a/drivers/gpio/s5p_gpio.c b/drivers/gpio/s5p_gpio.c
index 47f3213927..656bf4a06c 100644
--- a/drivers/gpio/s5p_gpio.c
+++ b/drivers/gpio/s5p_gpio.c
@@ -144,9 +144,11 @@ void s5p_gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode)
struct s5p_gpio_bank *s5p_gpio_get_bank(unsigned gpio)
{
- int bank = gpio / GPIO_PER_BANK;
- bank *= sizeof(struct s5p_gpio_bank);
+ int bank;
+ unsigned g = gpio - s5p_gpio_part_max(gpio);
+ bank = g / GPIO_PER_BANK;
+ bank *= sizeof(struct s5p_gpio_bank);
return (struct s5p_gpio_bank *) (s5p_gpio_base(gpio) + bank);
}
diff --git a/drivers/input/tegra-kbc.c b/drivers/input/tegra-kbc.c
index ab7a9e33ee..88471d3edf 100644
--- a/drivers/input/tegra-kbc.c
+++ b/drivers/input/tegra-kbc.c
@@ -63,6 +63,7 @@ static struct keyb {
struct kbc_tegra *kbc; /* tegra keyboard controller */
unsigned char inited; /* 1 if keyboard has been inited */
unsigned char first_scan; /* 1 if this is our first key scan */
+ unsigned char created; /* 1 if driver has been created */
/*
* After init we must wait a short time before polling the keyboard.
@@ -306,6 +307,10 @@ static void tegra_kbc_open(void)
*/
static int init_tegra_keyboard(void)
{
+ /* check if already created */
+ if (config.created)
+ return 0;
+
#ifdef CONFIG_OF_CONTROL
int node;
@@ -349,6 +354,7 @@ static int init_tegra_keyboard(void)
config_kbc_gpio(config.kbc);
tegra_kbc_open();
+ config.created = 1;
debug("%s: Tegra keyboard ready\n", __func__);
return 0;
@@ -357,6 +363,8 @@ static int init_tegra_keyboard(void)
int drv_keyboard_init(void)
{
struct stdio_dev dev;
+ char *stdinname = getenv("stdin");
+ int error;
if (input_init(&config.input, 0)) {
debug("%s: Cannot set up input\n", __func__);
@@ -372,5 +380,13 @@ int drv_keyboard_init(void)
dev.start = init_tegra_keyboard;
/* Register the device. init_tegra_keyboard() will be called soon */
- return input_stdio_register(&dev);
+ error = input_stdio_register(&dev);
+ if (error)
+ return error;
+#ifdef CONFIG_CONSOLE_MUX
+ error = iomux_doenv(stdin, stdinname);
+ if (error)
+ return error;
+#endif
+ return 0;
}
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 271463cf14..9fac190a6a 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -39,6 +39,7 @@ COBJS-$(CONFIG_DIALOG_PMIC) += pmic_dialog.o
COBJS-$(CONFIG_PMIC_FSL) += pmic_fsl.o
COBJS-$(CONFIG_PMIC_I2C) += pmic_i2c.o
COBJS-$(CONFIG_PMIC_SPI) += pmic_spi.o
+COBJS-$(CONFIG_PMIC_MAX77686) += pmic_max77686.o
COBJS-$(CONFIG_PMIC_MAX8998) += pmic_max8998.o
COBJS-$(CONFIG_PMIC_MAX8997) += pmic_max8997.o
diff --git a/drivers/misc/pmic_max77686.c b/drivers/misc/pmic_max77686.c
new file mode 100644
index 0000000000..36f7f4dde7
--- /dev/null
+++ b/drivers/misc/pmic_max77686.c
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ * Rajeshwari Shinde <rajeshwari.s@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <pmic.h>
+#include <max77686_pmic.h>
+
+int pmic_init(void)
+{
+ struct pmic *p = get_pmic();
+ static const char name[] = "MAX77686_PMIC";
+
+ puts("Board PMIC init\n");
+ p->name = name;
+ p->interface = PMIC_I2C;
+ p->number_of_regs = PMIC_NUM_OF_REGS;
+ p->hw.i2c.addr = MAX77686_I2C_ADDR;
+ p->hw.i2c.tx_num = 1;
+ p->bus = I2C_PMIC;
+
+ return 0;
+}
diff --git a/drivers/mmc/tegra_mmc.c b/drivers/mmc/tegra_mmc.c
index 8fea6a6bfb..1fd5592f2d 100644
--- a/drivers/mmc/tegra_mmc.c
+++ b/drivers/mmc/tegra_mmc.c
@@ -547,10 +547,11 @@ int tegra_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio)
mmc->getcd = tegra_mmc_getcd;
mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
+ mmc->host_caps = 0;
if (bus_width == 8)
- mmc->host_caps = MMC_MODE_8BIT;
- else
- mmc->host_caps = MMC_MODE_4BIT;
+ mmc->host_caps |= MMC_MODE_8BIT;
+ if (bus_width >= 4)
+ mmc->host_caps |= MMC_MODE_4BIT;
mmc->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS | MMC_MODE_HC;
/*
diff --git a/drivers/serial/s3c64xx.c b/drivers/serial/s3c64xx.c
index f53c2bf003..b590992dc8 100644
--- a/drivers/serial/s3c64xx.c
+++ b/drivers/serial/s3c64xx.c
@@ -22,7 +22,8 @@
*/
#include <common.h>
-
+#include <linux/compiler.h>
+#include <serial.h>
#include <asm/arch/s3c6400.h>
DECLARE_GLOBAL_DATA_PTR;
diff --git a/drivers/sound/Makefile b/drivers/sound/Makefile
new file mode 100644
index 0000000000..8fdffb10ef
--- /dev/null
+++ b/drivers/sound/Makefile
@@ -0,0 +1,48 @@
+#
+# Copyright (C) 2012 Samsung Electronics
+# R. Chandrasekar <rcsekar@samsung.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB := $(obj)libsound.o
+
+COBJS-$(CONFIG_SOUND) += sound.o
+COBJS-$(CONFIG_I2S) += samsung-i2s.o
+COBJS-$(CONFIG_SOUND_WM8994) += wm8994.o
+
+COBJS := $(COBJS-y)
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+all: $(LIB)
+
+$(LIB): $(obj).depend $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#
diff --git a/drivers/sound/samsung-i2s.c b/drivers/sound/samsung-i2s.c
new file mode 100644
index 0000000000..9f3117dd94
--- /dev/null
+++ b/drivers/sound/samsung-i2s.c
@@ -0,0 +1,358 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ * R. Chandrasekar <rcsekar@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm/arch/clk.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/i2s-regs.h>
+#include <asm/io.h>
+#include <common.h>
+#include <sound.h>
+#include <i2s.h>
+
+#define FIC_TX2COUNT(x) (((x) >> 24) & 0xf)
+#define FIC_TX1COUNT(x) (((x) >> 16) & 0xf)
+#define FIC_TXCOUNT(x) (((x) >> 8) & 0xf)
+#define FIC_RXCOUNT(x) (((x) >> 0) & 0xf)
+#define FICS_TXCOUNT(x) (((x) >> 8) & 0x7f)
+
+#define TIMEOUT_I2S_TX 100 /* i2s transfer timeout */
+
+/*
+ * Sets the frame size for I2S LR clock
+ *
+ * @param i2s_reg i2s regiter address
+ * @param rfs Frame Size
+ */
+static void i2s_set_lr_framesize(struct i2s_reg *i2s_reg, unsigned int rfs)
+{
+ unsigned int mod = readl(&i2s_reg->mod);
+
+ mod &= ~MOD_RCLK_MASK;
+
+ switch (rfs) {
+ case 768:
+ mod |= MOD_RCLK_768FS;
+ break;
+ case 512:
+ mod |= MOD_RCLK_512FS;
+ break;
+ case 384:
+ mod |= MOD_RCLK_384FS;
+ break;
+ default:
+ mod |= MOD_RCLK_256FS;
+ break;
+ }
+
+ writel(mod, &i2s_reg->mod);
+}
+
+/*
+ * Sets the i2s transfer control
+ *
+ * @param i2s_reg i2s regiter address
+ * @param on 1 enable tx , 0 disable tx transfer
+ */
+static void i2s_txctrl(struct i2s_reg *i2s_reg, int on)
+{
+ unsigned int con = readl(&i2s_reg->con);
+ unsigned int mod = readl(&i2s_reg->mod) & ~MOD_MASK;
+
+ if (on) {
+ con |= CON_ACTIVE;
+ con &= ~CON_TXCH_PAUSE;
+
+ } else {
+
+ con |= CON_TXCH_PAUSE;
+ con &= ~CON_ACTIVE;
+ }
+
+ writel(mod, &i2s_reg->mod);
+ writel(con, &i2s_reg->con);
+}
+
+/*
+ * set the bit clock frame size (in multiples of LRCLK)
+ *
+ * @param i2s_reg i2s regiter address
+ * @param bfs bit Frame Size
+ */
+static void i2s_set_bitclk_framesize(struct i2s_reg *i2s_reg, unsigned bfs)
+{
+ unsigned int mod = readl(&i2s_reg->mod);
+
+ mod &= ~MOD_BCLK_MASK;
+
+ switch (bfs) {
+ case 48:
+ mod |= MOD_BCLK_48FS;
+ break;
+ case 32:
+ mod |= MOD_BCLK_32FS;
+ break;
+ case 24:
+ mod |= MOD_BCLK_24FS;
+ break;
+ case 16:
+ mod |= MOD_BCLK_16FS;
+ break;
+ default:
+ return;
+ }
+ writel(mod, &i2s_reg->mod);
+}
+
+/*
+ * flushes the i2stx fifo
+ *
+ * @param i2s_reg i2s regiter address
+ * @param flush Tx fifo flush command (0x00 - do not flush
+ * 0x80 - flush tx fifo)
+ */
+void i2s_fifo(struct i2s_reg *i2s_reg, unsigned int flush)
+{
+ /* Flush the FIFO */
+ setbits_le32(&i2s_reg->fic, flush);
+ clrbits_le32(&i2s_reg->fic, flush);
+}
+
+/*
+ * Set System Clock direction
+ *
+ * @param i2s_reg i2s regiter address
+ * @param dir Clock direction
+ *
+ * @return int value 0 for success, -1 in case of error
+ */
+int i2s_set_sysclk_dir(struct i2s_reg *i2s_reg, int dir)
+{
+ unsigned int mod = readl(&i2s_reg->mod);
+
+ if (dir == SND_SOC_CLOCK_IN)
+ mod |= MOD_CDCLKCON;
+ else
+ mod &= ~MOD_CDCLKCON;
+
+ writel(mod, &i2s_reg->mod);
+
+ return 0;
+}
+
+/*
+ * Sets I2S Clcok format
+ *
+ * @param fmt i2s clock properties
+ * @param i2s_reg i2s regiter address
+ *
+ * @return int value 0 for success, -1 in case of error
+ */
+int i2s_set_fmt(struct i2s_reg *i2s_reg, unsigned int fmt)
+{
+ unsigned int mod = readl(&i2s_reg->mod);
+ unsigned int tmp = 0;
+ unsigned int ret = 0;
+
+ /* Format is priority */
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_RIGHT_J:
+ tmp |= MOD_LR_RLOW;
+ tmp |= MOD_SDF_MSB;
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ tmp |= MOD_LR_RLOW;
+ tmp |= MOD_SDF_LSB;
+ break;
+ case SND_SOC_DAIFMT_I2S:
+ tmp |= MOD_SDF_IIS;
+ break;
+ default:
+ debug("%s: Invalid format priority [0x%x]\n", __func__,
+ (fmt & SND_SOC_DAIFMT_FORMAT_MASK));
+ return -1;
+ }
+
+ /*
+ * INV flag is relative to the FORMAT flag - if set it simply
+ * flips the polarity specified by the Standard
+ */
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_NB_IF:
+ if (tmp & MOD_LR_RLOW)
+ tmp &= ~MOD_LR_RLOW;
+ else
+ tmp |= MOD_LR_RLOW;
+ break;
+ default:
+ debug("%s: Invalid clock ploarity input [0x%x]\n", __func__,
+ (fmt & SND_SOC_DAIFMT_INV_MASK));
+ return -1;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBS_CFS:
+ tmp |= MOD_SLAVE;
+ break;
+ case SND_SOC_DAIFMT_CBM_CFM:
+ /* Set default source clock in Master mode */
+ ret = i2s_set_sysclk_dir(i2s_reg, SND_SOC_CLOCK_OUT);
+ if (ret != 0) {
+ debug("%s:set i2s clock direction failed\n", __func__);
+ return -1;
+ }
+ break;
+ default:
+ debug("%s: Invalid master selection [0x%x]\n", __func__,
+ (fmt & SND_SOC_DAIFMT_MASTER_MASK));
+ return -1;
+ }
+
+ mod &= ~(MOD_SDF_MASK | MOD_LR_RLOW | MOD_SLAVE);
+ mod |= tmp;
+ writel(mod, &i2s_reg->mod);
+
+ return 0;
+}
+
+/*
+ * Sets the sample width in bits
+ *
+ * @param blc samplewidth (size of sample in bits)
+ * @param i2s_reg i2s regiter address
+ *
+ * @return int value 0 for success, -1 in case of error
+ */
+int i2s_set_samplesize(struct i2s_reg *i2s_reg, unsigned int blc)
+{
+ unsigned int mod = readl(&i2s_reg->mod);
+
+ mod &= ~MOD_BLCP_MASK;
+ mod &= ~MOD_BLC_MASK;
+
+ switch (blc) {
+ case 8:
+ mod |= MOD_BLCP_8BIT;
+ mod |= MOD_BLC_8BIT;
+ break;
+ case 16:
+ mod |= MOD_BLCP_16BIT;
+ mod |= MOD_BLC_16BIT;
+ break;
+ case 24:
+ mod |= MOD_BLCP_24BIT;
+ mod |= MOD_BLC_24BIT;
+ break;
+ default:
+ debug("%s: Invalid sample size input [0x%x]\n",
+ __func__, blc);
+ return -1;
+ }
+ writel(mod, &i2s_reg->mod);
+
+ return 0;
+}
+
+int i2s_transfer_tx_data(struct i2stx_info *pi2s_tx, unsigned int *data,
+ unsigned long data_size)
+{
+ int i;
+ int start;
+ struct i2s_reg *i2s_reg =
+ (struct i2s_reg *)pi2s_tx->base_address;
+
+ if (data_size < FIFO_LENGTH) {
+ debug("%s : Invalid data size\n", __func__);
+ return -1; /* invalid pcm data size */
+ }
+
+ /* fill the tx buffer before stating the tx transmit */
+ for (i = 0; i < FIFO_LENGTH; i++)
+ writel(*data++, &i2s_reg->txd);
+
+ data_size -= FIFO_LENGTH;
+ i2s_txctrl(i2s_reg, I2S_TX_ON);
+
+ while (data_size > 0) {
+ start = get_timer(0);
+ if (!(CON_TXFIFO_FULL & (readl(&i2s_reg->con)))) {
+ writel(*data++, &i2s_reg->txd);
+ data_size--;
+ } else {
+ if (get_timer(start) > TIMEOUT_I2S_TX) {
+ i2s_txctrl(i2s_reg, I2S_TX_OFF);
+ debug("%s: I2S Transfer Timeout\n", __func__);
+ return -1;
+ }
+ }
+ }
+ i2s_txctrl(i2s_reg, I2S_TX_OFF);
+
+ return 0;
+}
+
+int i2s_tx_init(struct i2stx_info *pi2s_tx)
+{
+ int ret;
+ struct i2s_reg *i2s_reg =
+ (struct i2s_reg *)pi2s_tx->base_address;
+
+ /* Initialize GPIO for I2s */
+ exynos_pinmux_config(PERIPH_ID_I2S1, 0);
+
+ /* Set EPLL Clock */
+ ret = set_epll_clk(pi2s_tx->audio_pll_clk);
+ if (ret != 0) {
+ debug("%s: epll clock set rate falied\n", __func__);
+ return -1;
+ }
+
+ /* Select Clk Source for Audio1 */
+ set_i2s_clk_source();
+
+ /* Set Prescaler to get MCLK */
+ set_i2s_clk_prescaler(pi2s_tx->audio_pll_clk,
+ (pi2s_tx->samplingrate * (pi2s_tx->rfs)));
+
+ /* Configure I2s format */
+ ret = i2s_set_fmt(i2s_reg, (SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBM_CFM));
+ if (ret == 0) {
+ i2s_set_lr_framesize(i2s_reg, pi2s_tx->rfs);
+ ret = i2s_set_samplesize(i2s_reg, pi2s_tx->bitspersample);
+ if (ret != 0) {
+ debug("%s:set sample rate failed\n", __func__);
+ return -1;
+ }
+
+ i2s_set_bitclk_framesize(i2s_reg, pi2s_tx->bfs);
+ /* disable i2s transfer flag and flush the fifo */
+ i2s_txctrl(i2s_reg, I2S_TX_OFF);
+ i2s_fifo(i2s_reg, FIC_TXFLUSH);
+ } else {
+ debug("%s: failed\n", __func__);
+ }
+
+ return ret;
+}
diff --git a/drivers/sound/sound.c b/drivers/sound/sound.c
new file mode 100644
index 0000000000..4c74534c95
--- /dev/null
+++ b/drivers/sound/sound.c
@@ -0,0 +1,228 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ * R. Chandrasekar <rcsekar@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <malloc.h>
+#include <common.h>
+#include <asm/io.h>
+#include <i2c.h>
+#include <i2s.h>
+#include <sound.h>
+#include "wm8994.h"
+#include <asm/arch/sound.h>
+
+/* defines */
+#define SOUND_400_HZ 400
+#define SOUND_BITS_IN_BYTE 8
+
+static struct i2stx_info g_i2stx_pri;
+static struct sound_codec_info g_codec_info;
+
+/*
+ * get_sound_fdt_values gets fdt values for i2s parameters
+ *
+ * @param i2stx_info i2s transmitter transfer param structure
+ * @param blob FDT blob
+ */
+static void get_sound_i2s_values(struct i2stx_info *i2s)
+{
+ i2s->base_address = samsung_get_base_i2s();
+ i2s->audio_pll_clk = I2S_PLL_CLK;
+ i2s->samplingrate = I2S_SAMPLING_RATE;
+ i2s->bitspersample = I2S_BITS_PER_SAMPLE;
+ i2s->channels = I2S_CHANNELS;
+ i2s->rfs = I2S_RFS;
+ i2s->bfs = I2S_BFS;
+}
+
+/*
+ * Gets fdt values for wm8994 config parameters
+ *
+ * @param pcodec_info codec information structure
+ * @param blob FDT blob
+ * @return int value, 0 for success
+ */
+static int get_sound_wm8994_values(struct sound_codec_info *pcodec_info)
+{
+ int error = 0;
+
+ switch (AUDIO_COMPAT) {
+ case AUDIO_COMPAT_SPI:
+ debug("%s: Support not added for SPI interface\n", __func__);
+ return -1;
+ break;
+ case AUDIO_COMPAT_I2C:
+ pcodec_info->i2c_bus = AUDIO_I2C_BUS;
+ pcodec_info->i2c_dev_addr = AUDIO_I2C_REG;
+ debug("i2c dev addr = %d\n", pcodec_info->i2c_dev_addr);
+ break;
+ default:
+ debug("%s: Unknown compat id %d\n", __func__, AUDIO_COMPAT);
+ return -1;
+ }
+
+ if (error == -1) {
+ debug("fail to get wm8994 codec node properties\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * Gets fdt values for codec config parameters
+ *
+ * @param pcodec_info codec information structure
+ * @param blob FDT blob
+ * @return int value, 0 for success
+ */
+static int get_sound_codec_values(struct sound_codec_info *pcodec_info)
+{
+ int error = 0;
+ const char *codectype;
+
+ codectype = AUDIO_CODEC;
+
+ if (!strcmp(codectype, "wm8994")) {
+ pcodec_info->codec_type = CODEC_WM_8994;
+ error = get_sound_wm8994_values(pcodec_info);
+ } else {
+ error = -1;
+ }
+
+ if (error == -1) {
+ debug("fail to get sound codec node properties\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+int sound_init(void)
+{
+ int ret;
+ struct i2stx_info *pi2s_tx = &g_i2stx_pri;
+ struct sound_codec_info *pcodec_info = &g_codec_info;
+
+ /* Get the I2S Values */
+ get_sound_i2s_values(pi2s_tx);
+
+ /* Get the codec Values */
+ if (get_sound_codec_values(pcodec_info) < 0)
+ return -1;
+
+ ret = i2s_tx_init(pi2s_tx);
+ if (ret) {
+ debug("%s: Failed to init i2c transmit: ret=%d\n", __func__,
+ ret);
+ return ret;
+ }
+
+ /* Check the codec type and initialise the same */
+ if (pcodec_info->codec_type == CODEC_WM_8994) {
+ ret = wm8994_init(pcodec_info, WM8994_AIF2,
+ pi2s_tx->samplingrate,
+ (pi2s_tx->samplingrate * (pi2s_tx->rfs)),
+ pi2s_tx->bitspersample, pi2s_tx->channels);
+ } else {
+ debug("%s: Unknown code type %d\n", __func__,
+ pcodec_info->codec_type);
+ return -1;
+ }
+ if (ret) {
+ debug("%s: Codec init failed\n", __func__);
+ return -1;
+ }
+
+ return ret;
+}
+
+/*
+ * Generates square wave sound data for 1 second
+ *
+ * @param data data buffer pointer
+ * @param size size of the buffer
+ * @param freq frequency of the wave
+ */
+static void sound_prepare_buffer(unsigned short *data, int size, uint32_t freq)
+{
+ const int sample = 48000;
+ const unsigned short amplitude = 16000; /* between 1 and 32767 */
+ const int period = freq ? sample / freq : 0;
+ const int half = period / 2;
+
+ assert(freq);
+
+ /* Make sure we don't overflow our buffer */
+ if (size % 2)
+ size--;
+
+ while (size) {
+ int i;
+ for (i = 0; size && i < half; i++) {
+ size -= 2;
+ *data++ = amplitude;
+ *data++ = amplitude;
+ }
+ for (i = 0; size && i < period - half; i++) {
+ size -= 2;
+ *data++ = -amplitude;
+ *data++ = -amplitude;
+ }
+ }
+}
+
+int sound_play(uint32_t msec, uint32_t frequency)
+{
+ unsigned int *data;
+ unsigned long data_size;
+ unsigned int ret = 0;
+
+ /*Buffer length computation */
+ data_size = g_i2stx_pri.samplingrate * g_i2stx_pri.channels;
+ data_size *= (g_i2stx_pri.bitspersample / SOUND_BITS_IN_BYTE);
+ data = malloc(data_size);
+
+ if (data == NULL) {
+ debug("%s: malloc failed\n", __func__);
+ return -1;
+ }
+
+ sound_prepare_buffer((unsigned short *)data,
+ data_size / sizeof(unsigned short), frequency);
+
+ while (msec >= 1000) {
+ ret = i2s_transfer_tx_data(&g_i2stx_pri, data,
+ (data_size / sizeof(int)));
+ msec -= 1000;
+ }
+ if (msec) {
+ unsigned long size =
+ (data_size * msec) / (sizeof(int) * 1000);
+
+ ret = i2s_transfer_tx_data(&g_i2stx_pri, data, size);
+ }
+
+ free(data);
+
+ return ret;
+}
diff --git a/drivers/sound/wm8994.c b/drivers/sound/wm8994.c
new file mode 100644
index 0000000000..293903ada2
--- /dev/null
+++ b/drivers/sound/wm8994.c
@@ -0,0 +1,792 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ * R. Chandrasekar <rcsekar@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <asm/arch/clk.h>
+#include <asm/arch/cpu.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <common.h>
+#include <div64.h>
+#include <i2c.h>
+#include <i2s.h>
+#include <sound.h>
+#include "wm8994.h"
+#include "wm8994_registers.h"
+
+/* defines for wm8994 system clock selection */
+#define SEL_MCLK1 0x00
+#define SEL_MCLK2 0x08
+#define SEL_FLL1 0x10
+#define SEL_FLL2 0x18
+
+/* fll config to configure fll */
+struct wm8994_fll_config {
+ int src; /* Source */
+ int in; /* Input frequency in Hz */
+ int out; /* output frequency in Hz */
+};
+
+/* codec private data */
+struct wm8994_priv {
+ enum wm8994_type type; /* codec type of wolfson */
+ int revision; /* Revision */
+ int sysclk[WM8994_MAX_AIF]; /* System clock frequency in Hz */
+ int mclk[WM8994_MAX_AIF]; /* master clock frequency in Hz */
+ int aifclk[WM8994_MAX_AIF]; /* audio interface clock in Hz */
+ struct wm8994_fll_config fll[2]; /* fll config to configure fll */
+};
+
+/* wm 8994 supported sampling rate values */
+static unsigned int src_rate[] = {
+ 8000, 11025, 12000, 16000, 22050, 24000,
+ 32000, 44100, 48000, 88200, 96000
+};
+
+/* op clock divisions */
+static int opclk_divs[] = { 10, 20, 30, 40, 55, 60, 80, 120, 160 };
+
+/* lr clock frame size ratio */
+static int fs_ratios[] = {
+ 64, 128, 192, 256, 348, 512, 768, 1024, 1408, 1536
+};
+
+/* bit clock divisors */
+static int bclk_divs[] = {
+ 10, 15, 20, 30, 40, 50, 60, 80, 110, 120, 160, 220, 240, 320, 440, 480,
+ 640, 880, 960, 1280, 1760, 1920
+};
+
+static struct wm8994_priv g_wm8994_info;
+static unsigned char g_wm8994_i2c_dev_addr;
+
+/*
+ * Initialise I2C for wm 8994
+ *
+ * @param bus no i2c bus number in which wm8994 is connected
+ */
+static void wm8994_i2c_init(int bus_no)
+{
+ i2c_set_bus_num(bus_no);
+}
+
+/*
+ * Writes value to a device register through i2c
+ *
+ * @param reg reg number to be write
+ * @param data data to be writen to the above registor
+ *
+ * @return int value 1 for change, 0 for no change or negative error code.
+ */
+static int wm8994_i2c_write(unsigned int reg, unsigned short data)
+{
+ unsigned char val[2];
+
+ val[0] = (unsigned char)((data >> 8) & 0xff);
+ val[1] = (unsigned char)(data & 0xff);
+ debug("Write Addr : 0x%04X, Data : 0x%04X\n", reg, data);
+
+ return i2c_write(g_wm8994_i2c_dev_addr, reg, 2, val, 2);
+}
+
+/*
+ * Read a value from a device register through i2c
+ *
+ * @param reg reg number to be read
+ * @param data address of read data to be stored
+ *
+ * @return int value 0 for success, -1 in case of error.
+ */
+static unsigned int wm8994_i2c_read(unsigned int reg , unsigned short *data)
+{
+ unsigned char val[2];
+ int ret;
+
+ ret = i2c_read(g_wm8994_i2c_dev_addr, reg, 2, val, 2);
+ if (ret != 0) {
+ debug("%s: Error while reading register %#04x\n",
+ __func__, reg);
+ return -1;
+ }
+
+ *data = val[0];
+ *data <<= 8;
+ *data |= val[1];
+
+ return 0;
+}
+
+/*
+ * update device register bits through i2c
+ *
+ * @param reg codec register
+ * @param mask register mask
+ * @param value new value
+ *
+ * @return int value 1 if change in the register value,
+ * 0 for no change or negative error code.
+ */
+static int wm8994_update_bits(unsigned int reg, unsigned short mask,
+ unsigned short value)
+{
+ int change , ret = 0;
+ unsigned short old, new;
+
+ if (wm8994_i2c_read(reg, &old) != 0)
+ return -1;
+ new = (old & ~mask) | (value & mask);
+ change = (old != new) ? 1 : 0;
+ if (change)
+ ret = wm8994_i2c_write(reg, new);
+ if (ret < 0)
+ return ret;
+
+ return change;
+}
+
+/*
+ * Sets i2s set format
+ *
+ * @param aif_id Interface ID
+ * @param fmt i2S format
+ *
+ * @return -1 for error and 0 Success.
+ */
+int wm8994_set_fmt(int aif_id, unsigned int fmt)
+{
+ int ms_reg;
+ int aif_reg;
+ int ms = 0;
+ int aif = 0;
+ int aif_clk = 0;
+ int error = 0;
+
+ switch (aif_id) {
+ case 1:
+ ms_reg = WM8994_AIF1_MASTER_SLAVE;
+ aif_reg = WM8994_AIF1_CONTROL_1;
+ aif_clk = WM8994_AIF1_CLOCKING_1;
+ break;
+ case 2:
+ ms_reg = WM8994_AIF2_MASTER_SLAVE;
+ aif_reg = WM8994_AIF2_CONTROL_1;
+ aif_clk = WM8994_AIF2_CLOCKING_1;
+ break;
+ default:
+ debug("%s: Invalid audio interface selection\n", __func__);
+ return -1;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBS_CFS:
+ break;
+ case SND_SOC_DAIFMT_CBM_CFM:
+ ms = WM8994_AIF1_MSTR;
+ break;
+ default:
+ debug("%s: Invalid i2s master selection\n", __func__);
+ return -1;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_DSP_B:
+ aif |= WM8994_AIF1_LRCLK_INV;
+ case SND_SOC_DAIFMT_DSP_A:
+ aif |= 0x18;
+ break;
+ case SND_SOC_DAIFMT_I2S:
+ aif |= 0x10;
+ break;
+ case SND_SOC_DAIFMT_RIGHT_J:
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ aif |= 0x8;
+ break;
+ default:
+ debug("%s: Invalid i2s format selection\n", __func__);
+ return -1;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_DSP_A:
+ case SND_SOC_DAIFMT_DSP_B:
+ /* frame inversion not valid for DSP modes */
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ aif |= WM8994_AIF1_BCLK_INV;
+ break;
+ default:
+ debug("%s: Invalid i2s frame inverse selection\n",
+ __func__);
+ return -1;
+ }
+ break;
+
+ case SND_SOC_DAIFMT_I2S:
+ case SND_SOC_DAIFMT_RIGHT_J:
+ case SND_SOC_DAIFMT_LEFT_J:
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_IB_IF:
+ aif |= WM8994_AIF1_BCLK_INV | WM8994_AIF1_LRCLK_INV;
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ aif |= WM8994_AIF1_BCLK_INV;
+ break;
+ case SND_SOC_DAIFMT_NB_IF:
+ aif |= WM8994_AIF1_LRCLK_INV;
+ break;
+ default:
+ debug("%s: Invalid i2s clock polarity selection\n",
+ __func__);
+ return -1;
+ }
+ break;
+ default:
+ debug("%s: Invalid i2s format selection\n", __func__);
+ return -1;
+ }
+
+ error = wm8994_update_bits(aif_reg, WM8994_AIF1_BCLK_INV |
+ WM8994_AIF1_LRCLK_INV_MASK | WM8994_AIF1_FMT_MASK, aif);
+
+ error |= wm8994_update_bits(ms_reg, WM8994_AIF1_MSTR_MASK, ms);
+ error |= wm8994_update_bits(aif_clk, WM8994_AIF1CLK_ENA_MASK,
+ WM8994_AIF1CLK_ENA);
+ if (error < 0) {
+ debug("%s: codec register access error\n", __func__);
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * Sets hw params FOR WM8994
+ *
+ * @param wm8994 wm8994 information pointer
+ * @param aif_id Audio interface ID
+ * @param sampling_rate Sampling rate
+ * @param bits_per_sample Bits per sample
+ * @param Channels Channels in the given audio input
+ *
+ * @return -1 for error and 0 Success.
+ */
+static int wm8994_hw_params(struct wm8994_priv *wm8994, int aif_id,
+ unsigned int sampling_rate, unsigned int bits_per_sample,
+ unsigned int channels)
+{
+ int aif1_reg;
+ int aif2_reg;
+ int bclk_reg;
+ int bclk = 0;
+ int rate_reg;
+ int aif1 = 0;
+ int aif2 = 0;
+ int rate_val = 0;
+ int id = aif_id - 1;
+ int i, cur_val, best_val, bclk_rate, best;
+ unsigned short reg_data;
+ int ret = 0;
+
+ switch (aif_id) {
+ case 1:
+ aif1_reg = WM8994_AIF1_CONTROL_1;
+ aif2_reg = WM8994_AIF1_CONTROL_2;
+ bclk_reg = WM8994_AIF1_BCLK;
+ rate_reg = WM8994_AIF1_RATE;
+ break;
+ case 2:
+ aif1_reg = WM8994_AIF2_CONTROL_1;
+ aif2_reg = WM8994_AIF2_CONTROL_2;
+ bclk_reg = WM8994_AIF2_BCLK;
+ rate_reg = WM8994_AIF2_RATE;
+ break;
+ default:
+ return -1;
+ }
+
+ bclk_rate = sampling_rate * 32;
+ switch (bits_per_sample) {
+ case 16:
+ bclk_rate *= 16;
+ break;
+ case 20:
+ bclk_rate *= 20;
+ aif1 |= 0x20;
+ break;
+ case 24:
+ bclk_rate *= 24;
+ aif1 |= 0x40;
+ break;
+ case 32:
+ bclk_rate *= 32;
+ aif1 |= 0x60;
+ break;
+ default:
+ return -1;
+ }
+
+ /* Try to find an appropriate sample rate; look for an exact match. */
+ for (i = 0; i < ARRAY_SIZE(src_rate); i++)
+ if (src_rate[i] == sampling_rate)
+ break;
+
+ if (i == ARRAY_SIZE(src_rate)) {
+ debug("%s: Could not get the best matching samplingrate\n",
+ __func__);
+ return -1;
+ }
+
+ rate_val |= i << WM8994_AIF1_SR_SHIFT;
+
+ /* AIFCLK/fs ratio; look for a close match in either direction */
+ best = 0;
+ best_val = abs((fs_ratios[0] * sampling_rate)
+ - wm8994->aifclk[id]);
+
+ for (i = 1; i < ARRAY_SIZE(fs_ratios); i++) {
+ cur_val = abs((fs_ratios[i] * sampling_rate)
+ - wm8994->aifclk[id]);
+ if (cur_val >= best_val)
+ continue;
+ best = i;
+ best_val = cur_val;
+ }
+
+ rate_val |= best;
+
+ /*
+ * We may not get quite the right frequency if using
+ * approximate clocks so look for the closest match that is
+ * higher than the target (we need to ensure that there enough
+ * BCLKs to clock out the samples).
+ */
+ best = 0;
+ for (i = 0; i < ARRAY_SIZE(bclk_divs); i++) {
+ cur_val = (wm8994->aifclk[id] * 10 / bclk_divs[i]) - bclk_rate;
+ if (cur_val < 0) /* BCLK table is sorted */
+ break;
+ best = i;
+ }
+
+ if (i == ARRAY_SIZE(bclk_divs)) {
+ debug("%s: Could not get the best matching bclk division\n",
+ __func__);
+ return -1;
+ }
+
+ bclk_rate = wm8994->aifclk[id] * 10 / bclk_divs[best];
+ bclk |= best << WM8994_AIF1_BCLK_DIV_SHIFT;
+
+ if (wm8994_i2c_read(aif1_reg, &reg_data) != 0) {
+ debug("%s: AIF1 register read Failed\n", __func__);
+ return -1;
+ }
+
+ if ((channels == 1) && ((reg_data & 0x18) == 0x18))
+ aif2 |= WM8994_AIF1_MONO;
+
+ if (wm8994->aifclk[id] == 0) {
+ debug("%s:Audio interface clock not set\n", __func__);
+ return -1;
+ }
+
+ ret = wm8994_update_bits(aif1_reg, WM8994_AIF1_WL_MASK, aif1);
+ ret |= wm8994_update_bits(aif2_reg, WM8994_AIF1_MONO, aif2);
+ ret |= wm8994_update_bits(bclk_reg, WM8994_AIF1_BCLK_DIV_MASK, bclk);
+ ret |= wm8994_update_bits(rate_reg, WM8994_AIF1_SR_MASK |
+ WM8994_AIF1CLK_RATE_MASK, rate_val);
+
+ debug("rate vale = %x , bclk val= %x\n", rate_val, bclk);
+
+ if (ret < 0) {
+ debug("%s: codec register access error\n", __func__);
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * Configures Audio interface Clock
+ *
+ * @param wm8994 wm8994 information pointer
+ * @param aif Audio Interface ID
+ *
+ * @return -1 for error and 0 Success.
+ */
+static int configure_aif_clock(struct wm8994_priv *wm8994, int aif)
+{
+ int rate;
+ int reg1 = 0;
+ int offset;
+ int ret;
+
+ /* AIF(1/0) register adress offset calculated */
+ if (aif)
+ offset = 4;
+ else
+ offset = 0;
+
+ switch (wm8994->sysclk[aif]) {
+ case WM8994_SYSCLK_MCLK1:
+ reg1 |= SEL_MCLK1;
+ rate = wm8994->mclk[0];
+ break;
+
+ case WM8994_SYSCLK_MCLK2:
+ reg1 |= SEL_MCLK2;
+ rate = wm8994->mclk[1];
+ break;
+
+ case WM8994_SYSCLK_FLL1:
+ reg1 |= SEL_FLL1;
+ rate = wm8994->fll[0].out;
+ break;
+
+ case WM8994_SYSCLK_FLL2:
+ reg1 |= SEL_FLL2;
+ rate = wm8994->fll[1].out;
+ break;
+
+ default:
+ debug("%s: Invalid input clock selection [%d]\n",
+ __func__, wm8994->sysclk[aif]);
+ return -1;
+ }
+
+ /* if input clock frequenct is more than 135Mhz then divide */
+ if (rate >= WM8994_MAX_INPUT_CLK_FREQ) {
+ rate /= 2;
+ reg1 |= WM8994_AIF1CLK_DIV;
+ }
+
+ wm8994->aifclk[aif] = rate;
+
+ ret = wm8994_update_bits(WM8994_AIF1_CLOCKING_1 + offset,
+ WM8994_AIF1CLK_SRC_MASK | WM8994_AIF1CLK_DIV,
+ reg1);
+
+ ret |= wm8994_update_bits(WM8994_CLOCKING_1,
+ WM8994_SYSCLK_SRC | WM8994_AIF2DSPCLK_ENA_MASK |
+ WM8994_SYSDSPCLK_ENA_MASK, WM8994_SYSCLK_SRC |
+ WM8994_AIF2DSPCLK_ENA | WM8994_SYSDSPCLK_ENA);
+
+ if (ret < 0) {
+ debug("%s: codec register access error\n", __func__);
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * Configures Audio interface for the given frequency
+ *
+ * @param wm8994 wm8994 information
+ * @param aif_id Audio Interface
+ * @param clk_id Input Clock ID
+ * @param freq Sampling frequency in Hz
+ *
+ * @return -1 for error and 0 success.
+ */
+static int wm8994_set_sysclk(struct wm8994_priv *wm8994, int aif_id,
+ int clk_id, unsigned int freq)
+{
+ int i;
+ int ret = 0;
+
+ wm8994->sysclk[aif_id - 1] = clk_id;
+
+ switch (clk_id) {
+ case WM8994_SYSCLK_MCLK1:
+ wm8994->mclk[0] = freq;
+ if (aif_id == 2) {
+ ret = wm8994_update_bits(WM8994_AIF1_CLOCKING_2 ,
+ WM8994_AIF2DAC_DIV_MASK , 0);
+ }
+ break;
+
+ case WM8994_SYSCLK_MCLK2:
+ /* TODO: Set GPIO AF */
+ wm8994->mclk[1] = freq;
+ break;
+
+ case WM8994_SYSCLK_FLL1:
+ case WM8994_SYSCLK_FLL2:
+ break;
+
+ case WM8994_SYSCLK_OPCLK:
+ /*
+ * Special case - a division (times 10) is given and
+ * no effect on main clocking.
+ */
+ if (freq) {
+ for (i = 0; i < ARRAY_SIZE(opclk_divs); i++)
+ if (opclk_divs[i] == freq)
+ break;
+ if (i == ARRAY_SIZE(opclk_divs)) {
+ debug("%s frequency divisor not found\n",
+ __func__);
+ return -1;
+ }
+ ret = wm8994_update_bits(WM8994_CLOCKING_2,
+ WM8994_OPCLK_DIV_MASK, i);
+ ret |= wm8994_update_bits(WM8994_POWER_MANAGEMENT_2,
+ WM8994_OPCLK_ENA, WM8994_OPCLK_ENA);
+ } else {
+ ret |= wm8994_update_bits(WM8994_POWER_MANAGEMENT_2,
+ WM8994_OPCLK_ENA, 0);
+ }
+
+ default:
+ debug("%s Invalid input clock selection [%d]\n",
+ __func__, clk_id);
+ return -1;
+ }
+
+ ret |= configure_aif_clock(wm8994, aif_id - 1);
+
+ if (ret < 0) {
+ debug("%s: codec register access error\n", __func__);
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * Initializes Volume for AIF2 to HP path
+ *
+ * @returns -1 for error and 0 Success.
+ *
+ */
+static int wm8994_init_volume_aif2_dac1(void)
+{
+ int ret;
+
+ /* Unmute AIF2DAC */
+ ret = wm8994_update_bits(WM8994_AIF2_DAC_FILTERS_1,
+ WM8994_AIF2DAC_MUTE_MASK, 0);
+
+
+ ret |= wm8994_update_bits(WM8994_AIF2_DAC_LEFT_VOLUME,
+ WM8994_AIF2DAC_VU_MASK | WM8994_AIF2DACL_VOL_MASK,
+ WM8994_AIF2DAC_VU | 0xff);
+
+ ret |= wm8994_update_bits(WM8994_AIF2_DAC_RIGHT_VOLUME,
+ WM8994_AIF2DAC_VU_MASK | WM8994_AIF2DACR_VOL_MASK,
+ WM8994_AIF2DAC_VU | 0xff);
+
+
+ ret |= wm8994_update_bits(WM8994_DAC1_LEFT_VOLUME,
+ WM8994_DAC1_VU_MASK | WM8994_DAC1L_VOL_MASK |
+ WM8994_DAC1L_MUTE_MASK, WM8994_DAC1_VU | 0xc0);
+
+ ret |= wm8994_update_bits(WM8994_DAC1_RIGHT_VOLUME,
+ WM8994_DAC1_VU_MASK | WM8994_DAC1R_VOL_MASK |
+ WM8994_DAC1R_MUTE_MASK, WM8994_DAC1_VU | 0xc0);
+ /* Head Phone Volume */
+ ret |= wm8994_i2c_write(WM8994_LEFT_OUTPUT_VOLUME, 0x12D);
+ ret |= wm8994_i2c_write(WM8994_RIGHT_OUTPUT_VOLUME, 0x12D);
+
+ if (ret < 0) {
+ debug("%s: codec register access error\n", __func__);
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * Intialise wm8994 codec device
+ *
+ * @param wm8994 wm8994 information
+ *
+ * @returns -1 for error and 0 Success.
+ */
+static int wm8994_device_init(struct wm8994_priv *wm8994)
+{
+ const char *devname;
+ unsigned short reg_data;
+ int ret;
+
+ wm8994_i2c_write(WM8994_SOFTWARE_RESET, WM8994_SW_RESET);/* Reset */
+
+ ret = wm8994_i2c_read(WM8994_SOFTWARE_RESET, &reg_data);
+ if (ret < 0) {
+ debug("Failed to read ID register\n");
+ goto err;
+ }
+
+ if (reg_data == WM8994_ID) {
+ devname = "WM8994";
+ debug("Device registered as type %d\n", wm8994->type);
+ wm8994->type = WM8994;
+ } else {
+ debug("Device is not a WM8994, ID is %x\n", ret);
+ ret = -1;
+ goto err;
+ }
+
+ ret = wm8994_i2c_read(WM8994_CHIP_REVISION, &reg_data);
+ if (ret < 0) {
+ debug("Failed to read revision register: %d\n", ret);
+ goto err;
+ }
+ wm8994->revision = reg_data;
+ debug("%s revision %c\n", devname, 'A' + wm8994->revision);
+
+ /* VMID Selection */
+ ret |= wm8994_update_bits(WM8994_POWER_MANAGEMENT_1,
+ WM8994_VMID_SEL_MASK | WM8994_BIAS_ENA_MASK, 0x3);
+
+ /* Charge Pump Enable */
+ ret |= wm8994_update_bits(WM8994_CHARGE_PUMP_1, WM8994_CP_ENA_MASK,
+ WM8994_CP_ENA);
+
+ /* Head Phone Power Enable */
+ ret |= wm8994_update_bits(WM8994_POWER_MANAGEMENT_1,
+ WM8994_HPOUT1L_ENA_MASK, WM8994_HPOUT1L_ENA);
+
+ ret |= wm8994_update_bits(WM8994_POWER_MANAGEMENT_1,
+ WM8994_HPOUT1R_ENA_MASK, WM8994_HPOUT1R_ENA);
+
+ /* Power enable for AIF2 and DAC1 */
+ ret |= wm8994_update_bits(WM8994_POWER_MANAGEMENT_5,
+ WM8994_AIF2DACL_ENA_MASK | WM8994_AIF2DACR_ENA_MASK |
+ WM8994_DAC1L_ENA_MASK | WM8994_DAC1R_ENA_MASK,
+ WM8994_AIF2DACL_ENA | WM8994_AIF2DACR_ENA | WM8994_DAC1L_ENA |
+ WM8994_DAC1R_ENA);
+
+ /* Head Phone Initialisation */
+ ret |= wm8994_update_bits(WM8994_ANALOGUE_HP_1,
+ WM8994_HPOUT1L_DLY_MASK | WM8994_HPOUT1R_DLY_MASK,
+ WM8994_HPOUT1L_DLY | WM8994_HPOUT1R_DLY);
+
+ ret |= wm8994_update_bits(WM8994_DC_SERVO_1,
+ WM8994_DCS_ENA_CHAN_0_MASK |
+ WM8994_DCS_ENA_CHAN_1_MASK , WM8994_DCS_ENA_CHAN_0 |
+ WM8994_DCS_ENA_CHAN_1);
+
+ ret |= wm8994_update_bits(WM8994_ANALOGUE_HP_1,
+ WM8994_HPOUT1L_DLY_MASK |
+ WM8994_HPOUT1R_DLY_MASK | WM8994_HPOUT1L_OUTP_MASK |
+ WM8994_HPOUT1R_OUTP_MASK |
+ WM8994_HPOUT1L_RMV_SHORT_MASK |
+ WM8994_HPOUT1R_RMV_SHORT_MASK, WM8994_HPOUT1L_DLY |
+ WM8994_HPOUT1R_DLY | WM8994_HPOUT1L_OUTP |
+ WM8994_HPOUT1R_OUTP | WM8994_HPOUT1L_RMV_SHORT |
+ WM8994_HPOUT1R_RMV_SHORT);
+
+ /* MIXER Config DAC1 to HP */
+ ret |= wm8994_update_bits(WM8994_OUTPUT_MIXER_1,
+ WM8994_DAC1L_TO_HPOUT1L_MASK, WM8994_DAC1L_TO_HPOUT1L);
+
+ ret |= wm8994_update_bits(WM8994_OUTPUT_MIXER_2,
+ WM8994_DAC1R_TO_HPOUT1R_MASK, WM8994_DAC1R_TO_HPOUT1R);
+
+ /* Routing AIF2 to DAC1 */
+ ret |= wm8994_update_bits(WM8994_DAC1_LEFT_MIXER_ROUTING,
+ WM8994_AIF2DACL_TO_DAC1L_MASK,
+ WM8994_AIF2DACL_TO_DAC1L);
+
+ ret |= wm8994_update_bits(WM8994_DAC1_RIGHT_MIXER_ROUTING,
+ WM8994_AIF2DACR_TO_DAC1R_MASK,
+ WM8994_AIF2DACR_TO_DAC1R);
+
+ /* GPIO Settings for AIF2 */
+ /* B CLK */
+ ret |= wm8994_update_bits(WM8994_GPIO_3, WM8994_GPIO_DIR_MASK |
+ WM8994_GPIO_FUNCTION_MASK ,
+ WM8994_GPIO_DIR_OUTPUT |
+ WM8994_GPIO_FUNCTION_I2S_CLK);
+
+ /* LR CLK */
+ ret |= wm8994_update_bits(WM8994_GPIO_4, WM8994_GPIO_DIR_MASK |
+ WM8994_GPIO_FUNCTION_MASK,
+ WM8994_GPIO_DIR_OUTPUT |
+ WM8994_GPIO_FUNCTION_I2S_CLK);
+
+ /* DATA */
+ ret |= wm8994_update_bits(WM8994_GPIO_5, WM8994_GPIO_DIR_MASK |
+ WM8994_GPIO_FUNCTION_MASK,
+ WM8994_GPIO_DIR_OUTPUT |
+ WM8994_GPIO_FUNCTION_I2S_CLK);
+
+ ret |= wm8994_init_volume_aif2_dac1();
+ if (ret < 0)
+ goto err;
+
+ debug("%s: Codec chip init ok\n", __func__);
+ return 0;
+err:
+ debug("%s: Codec chip init error\n", __func__);
+ return -1;
+}
+
+/*wm8994 Device Initialisation */
+int wm8994_init(struct sound_codec_info *pcodec_info,
+ enum en_audio_interface aif_id,
+ int sampling_rate, int mclk_freq,
+ int bits_per_sample, unsigned int channels)
+{
+ int ret = 0;
+
+ /* shift the device address by 1 for 7 bit addressing */
+ g_wm8994_i2c_dev_addr = pcodec_info->i2c_dev_addr;
+ wm8994_i2c_init(pcodec_info->i2c_bus);
+
+ if (pcodec_info->codec_type == CODEC_WM_8994)
+ g_wm8994_info.type = WM8994;
+ else {
+ debug("%s: Codec id [%d] not defined\n", __func__,
+ pcodec_info->codec_type);
+ return -1;
+ }
+
+ ret = wm8994_device_init(&g_wm8994_info);
+ if (ret < 0) {
+ debug("%s: wm8994 codec chip init failed\n", __func__);
+ return ret;
+ }
+
+ ret = wm8994_set_sysclk(&g_wm8994_info, aif_id, WM8994_SYSCLK_MCLK1,
+ mclk_freq);
+ if (ret < 0) {
+ debug("%s: wm8994 codec set sys clock failed\n", __func__);
+ return ret;
+ }
+
+ ret = wm8994_hw_params(&g_wm8994_info, aif_id, sampling_rate,
+ bits_per_sample, channels);
+
+ if (ret == 0) {
+ ret = wm8994_set_fmt(aif_id, SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBS_CFS);
+ }
+ return ret;
+}
diff --git a/drivers/sound/wm8994.h b/drivers/sound/wm8994.h
new file mode 100644
index 0000000000..a8f0de18c5
--- /dev/null
+++ b/drivers/sound/wm8994.h
@@ -0,0 +1,87 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ * R. Chadrasekar <rcsekar@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __WM8994_H__
+#define __WM8994_H__
+
+/* Sources for AIF1/2 SYSCLK - use with set_dai_sysclk() */
+#define WM8994_SYSCLK_MCLK1 1
+#define WM8994_SYSCLK_MCLK2 2
+#define WM8994_SYSCLK_FLL1 3
+#define WM8994_SYSCLK_FLL2 4
+
+/* Avilable audi interface ports in wm8994 codec */
+enum en_audio_interface {
+ WM8994_AIF1 = 1,
+ WM8994_AIF2,
+ WM8994_AIF3
+};
+
+/* OPCLK is also configured with set_dai_sysclk, specify division*10 as rate. */
+#define WM8994_SYSCLK_OPCLK 5
+
+#define WM8994_FLL1 1
+#define WM8994_FLL2 2
+
+#define WM8994_FLL_SRC_MCLK1 1
+#define WM8994_FLL_SRC_MCLK2 2
+#define WM8994_FLL_SRC_LRCLK 3
+#define WM8994_FLL_SRC_BCLK 4
+
+/* maximum available digital interfac in the dac to configure */
+#define WM8994_MAX_AIF 2
+
+#define WM8994_MAX_INPUT_CLK_FREQ 13500000
+#define WM8994_ID 0x8994
+
+enum wm8994_vmid_mode {
+ WM8994_VMID_NORMAL,
+ WM8994_VMID_FORCE,
+};
+
+/* wm 8994 family devices */
+enum wm8994_type {
+ WM8994 = 0,
+ WM8958 = 1,
+ WM1811 = 2,
+};
+
+/*
+ * intialise wm8994 sound codec device for the given configuration
+ *
+ * @param pcodec_info pointer value of the sound codec info structure
+ * parsed from device tree
+ * @param aif_id enum value of codec interface port in which
+ * soc i2s is connected
+ * @param sampling_rate Sampling rate ranges between from 8khz to 96khz
+ * @param mclk_freq Master clock frequency.
+ * @param bits_per_sample bits per Sample can be 16 or 24
+ * @param channels Number of channnels, maximum 2
+ *
+ * @returns -1 for error and 0 Success.
+ */
+int wm8994_init(struct sound_codec_info *pcodec_info,
+ enum en_audio_interface aif_id,
+ int sampling_rate, int mclk_freq,
+ int bits_per_sample, unsigned int channels);
+#endif /*__WM8994_H__ */
diff --git a/drivers/sound/wm8994_registers.h b/drivers/sound/wm8994_registers.h
new file mode 100644
index 0000000000..f455b112f0
--- /dev/null
+++ b/drivers/sound/wm8994_registers.h
@@ -0,0 +1,299 @@
+/*
+ * (C) Copyright 2012 Samsung Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __WM8994_REGISTERS_H__
+#define __WM8994_REGISTERS_H__
+
+/*
+ * Register values.
+ */
+#define WM8994_SOFTWARE_RESET 0x00
+#define WM8994_POWER_MANAGEMENT_1 0x01
+#define WM8994_POWER_MANAGEMENT_2 0x02
+#define WM8994_POWER_MANAGEMENT_5 0x05
+#define WM8994_LEFT_OUTPUT_VOLUME 0x1C
+#define WM8994_RIGHT_OUTPUT_VOLUME 0x1D
+#define WM8994_OUTPUT_MIXER_1 0x2D
+#define WM8994_OUTPUT_MIXER_2 0x2E
+#define WM8994_CHARGE_PUMP_1 0x4C
+#define WM8994_DC_SERVO_1 0x54
+#define WM8994_ANALOGUE_HP_1 0x60
+#define WM8994_CHIP_REVISION 0x100
+#define WM8994_AIF1_CLOCKING_1 0x200
+#define WM8994_AIF1_CLOCKING_2 0x201
+#define WM8994_AIF2_CLOCKING_1 0x204
+#define WM8994_CLOCKING_1 0x208
+#define WM8994_CLOCKING_2 0x209
+#define WM8994_AIF1_RATE 0x210
+#define WM8994_AIF2_RATE 0x211
+#define WM8994_RATE_STATUS 0x212
+#define WM8994_AIF1_CONTROL_1 0x300
+#define WM8994_AIF1_CONTROL_2 0x301
+#define WM8994_AIF1_MASTER_SLAVE 0x302
+#define WM8994_AIF1_BCLK 0x303
+#define WM8994_AIF2_CONTROL_1 0x310
+#define WM8994_AIF2_CONTROL_2 0x311
+#define WM8994_AIF2_MASTER_SLAVE 0x312
+#define WM8994_AIF2_BCLK 0x313
+#define WM8994_AIF2_DAC_LEFT_VOLUME 0x502
+#define WM8994_AIF2_DAC_RIGHT_VOLUME 0x503
+#define WM8994_AIF2_DAC_FILTERS_1 0x520
+#define WM8994_DAC1_LEFT_MIXER_ROUTING 0x601
+#define WM8994_DAC1_RIGHT_MIXER_ROUTING 0x602
+#define WM8994_DAC1_LEFT_VOLUME 0x610
+#define WM8994_DAC1_RIGHT_VOLUME 0x611
+#define WM8994_GPIO_3 0x702
+#define WM8994_GPIO_4 0x703
+#define WM8994_GPIO_5 0x704
+
+/*
+ * Field Definitions.
+ */
+
+/*
+ * R0 (0x00) - Software Reset
+ */
+/* SW_RESET */
+#define WM8994_SW_RESET 1
+/*
+ * R1 (0x01) - Power Management (1)
+ */
+/* HPOUT1L_ENA */
+#define WM8994_HPOUT1L_ENA 0x0200
+/* HPOUT1L_ENA */
+#define WM8994_HPOUT1L_ENA_MASK 0x0200
+/* HPOUT1R_ENA */
+#define WM8994_HPOUT1R_ENA 0x0100
+/* HPOUT1R_ENA */
+#define WM8994_HPOUT1R_ENA_MASK 0x0100
+/* VMID_SEL - [2:1] */
+#define WM8994_VMID_SEL_MASK 0x0006
+/* BIAS_ENA */
+#define WM8994_BIAS_ENA 0x0001
+/* BIAS_ENA */
+#define WM8994_BIAS_ENA_MASK 0x0001
+
+/*
+ * R2 (0x02) - Power Management (2)
+ */
+/* OPCLK_ENA */
+#define WM8994_OPCLK_ENA 0x0800
+
+/*
+ * R5 (0x05) - Power Management (5)
+ */
+/* AIF2DACL_ENA */
+#define WM8994_AIF2DACL_ENA 0x2000
+#define WM8994_AIF2DACL_ENA_MASK 0x2000
+/* AIF2DACR_ENA */
+#define WM8994_AIF2DACR_ENA 0x1000
+#define WM8994_AIF2DACR_ENA_MASK 0x1000
+/* DAC1L_ENA */
+#define WM8994_DAC1L_ENA 0x0002
+#define WM8994_DAC1L_ENA_MASK 0x0002
+/* DAC1R_ENA */
+#define WM8994_DAC1R_ENA 0x0001
+#define WM8994_DAC1R_ENA_MASK 0x0001
+
+/*
+ * R45 (0x2D) - Output Mixer (1)
+ */
+/* DAC1L_TO_HPOUT1L */
+#define WM8994_DAC1L_TO_HPOUT1L 0x0100
+#define WM8994_DAC1L_TO_HPOUT1L_MASK 0x0100
+
+/*
+ * R46 (0x2E) - Output Mixer (2)
+ */
+/* DAC1R_TO_HPOUT1R */
+#define WM8994_DAC1R_TO_HPOUT1R 0x0100
+#define WM8994_DAC1R_TO_HPOUT1R_MASK 0x0100
+
+/*
+ * R76 (0x4C) - Charge Pump (1)
+ */
+/* CP_ENA */
+#define WM8994_CP_ENA 0x8000
+#define WM8994_CP_ENA_MASK 0x8000
+/*
+ * R84 (0x54) - DC Servo (1)
+ */
+/* DCS_ENA_CHAN_1 */
+#define WM8994_DCS_ENA_CHAN_1 0x0002
+#define WM8994_DCS_ENA_CHAN_1_MASK 0x0002
+/* DCS_ENA_CHAN_0 */
+#define WM8994_DCS_ENA_CHAN_0 0x0001
+#define WM8994_DCS_ENA_CHAN_0_MASK 0x0001
+
+/*
+ * R96 (0x60) - Analogue HP (1)
+ */
+/* HPOUT1L_RMV_SHORT */
+#define WM8994_HPOUT1L_RMV_SHORT 0x0080
+#define WM8994_HPOUT1L_RMV_SHORT_MASK 0x0080
+/* HPOUT1L_OUTP */
+#define WM8994_HPOUT1L_OUTP 0x0040
+#define WM8994_HPOUT1L_OUTP_MASK 0x0040
+/* HPOUT1L_DLY */
+#define WM8994_HPOUT1L_DLY 0x0020
+#define WM8994_HPOUT1L_DLY_MASK 0x0020
+/* HPOUT1R_RMV_SHORT */
+#define WM8994_HPOUT1R_RMV_SHORT 0x0008
+#define WM8994_HPOUT1R_RMV_SHORT_MASK 0x0008
+/* HPOUT1R_OUTP */
+#define WM8994_HPOUT1R_OUTP 0x0004
+#define WM8994_HPOUT1R_OUTP_MASK 0x0004
+/* HPOUT1R_DLY */
+#define WM8994_HPOUT1R_DLY 0x0002
+#define WM8994_HPOUT1R_DLY_MASK 0x0002
+
+/*
+ * R512 (0x200) - AIF1 Clocking (1)
+ */
+/* AIF1CLK_SRC - [4:3] */
+#define WM8994_AIF1CLK_SRC_MASK 0x0018
+/* AIF1CLK_DIV */
+#define WM8994_AIF1CLK_DIV 0x0002
+/* AIF1CLK_ENA */
+#define WM8994_AIF1CLK_ENA 0x0001
+#define WM8994_AIF1CLK_ENA_MASK 0x0001
+
+/*
+ * R517 (0x205) - AIF2 Clocking (2)
+ */
+/* AIF2DAC_DIV - [5:3] */
+#define WM8994_AIF2DAC_DIV_MASK 0x0038
+
+/*
+ * R520 (0x208) - Clocking (1)
+ */
+/* AIF2DSPCLK_ENA */
+#define WM8994_AIF2DSPCLK_ENA 0x0004
+#define WM8994_AIF2DSPCLK_ENA_MASK 0x0004
+/* SYSDSPCLK_ENA */
+#define WM8994_SYSDSPCLK_ENA 0x0002
+#define WM8994_SYSDSPCLK_ENA_MASK 0x0002
+/* SYSCLK_SRC */
+#define WM8994_SYSCLK_SRC 0x0001
+
+/*
+ * R521 (0x209) - Clocking (2)
+ */
+/* OPCLK_DIV - [2:0] */
+#define WM8994_OPCLK_DIV_MASK 0x0007
+
+/*
+ * R528 (0x210) - AIF1 Rate
+ */
+/* AIF1_SR - [7:4] */
+#define WM8994_AIF1_SR_MASK 0x00F0
+#define WM8994_AIF1_SR_SHIFT 4
+/* AIF1CLK_RATE - [3:0] */
+#define WM8994_AIF1CLK_RATE_MASK 0x000F
+
+/*
+ * R768 (0x300) - AIF1 Control (1)
+ */
+/* AIF1_BCLK_INV */
+#define WM8994_AIF1_BCLK_INV 0x0100
+/* AIF1_LRCLK_INV */
+#define WM8994_AIF1_LRCLK_INV 0x0080
+#define WM8994_AIF1_LRCLK_INV_MASK 0x0080
+/* AIF1_WL - [6:5] */
+#define WM8994_AIF1_WL_MASK 0x0060
+/* AIF1_FMT - [4:3] */
+#define WM8994_AIF1_FMT_MASK 0x0018
+
+/*
+ * R769 (0x301) - AIF1 Control (2)
+ */
+/* AIF1_MONO */
+#define WM8994_AIF1_MONO 0x0100
+
+/*
+ * R770 (0x302) - AIF1 Master/Slave
+ */
+/* AIF1_MSTR */
+#define WM8994_AIF1_MSTR 0x4000
+#define WM8994_AIF1_MSTR_MASK 0x4000
+
+/*
+ * R771 (0x303) - AIF1 BCLK
+ */
+/* AIF1_BCLK_DIV - [8:4] */
+#define WM8994_AIF1_BCLK_DIV_MASK 0x01F0
+#define WM8994_AIF1_BCLK_DIV_SHIFT 4
+
+/*
+ * R1282 (0x502) - AIF2 DAC Left Volume
+ */
+/* AIF2DAC_VU */
+#define WM8994_AIF2DAC_VU 0x0100
+#define WM8994_AIF2DAC_VU_MASK 0x0100
+/* AIF2DACL_VOL - [7:0] */
+#define WM8994_AIF2DACL_VOL_MASK 0x00FF
+
+/*
+ * R1283 (0x503) - AIF2 DAC Right Volume
+ */
+/* AIF2DACR_VOL - [7:0] */
+#define WM8994_AIF2DACR_VOL_MASK 0x00FF
+
+/*
+ * R1312 (0x520) - AIF2 DAC Filters (1)
+ */
+/* AIF2DAC_MUTE */
+#define WM8994_AIF2DAC_MUTE_MASK 0x0200
+
+/*
+ * R1537 (0x601) - DAC1 Left Mixer Routing
+ */
+/* AIF2DACL_TO_DAC1L */
+#define WM8994_AIF2DACL_TO_DAC1L 0x0004
+#define WM8994_AIF2DACL_TO_DAC1L_MASK 0x0004
+
+/*
+ * R1538 (0x602) - DAC1 Right Mixer Routing
+ */
+/* AIF2DACR_TO_DAC1R */
+#define WM8994_AIF2DACR_TO_DAC1R 0x0004
+#define WM8994_AIF2DACR_TO_DAC1R_MASK 0x0004
+
+/*
+ * R1552 (0x610) - DAC1 Left Volume
+ */
+/* DAC1L_MUTE */
+#define WM8994_DAC1L_MUTE_MASK 0x0200
+/* DAC1_VU */
+#define WM8994_DAC1_VU 0x0100
+#define WM8994_DAC1_VU_MASK 0x0100
+/* DAC1L_VOL - [7:0] */
+#define WM8994_DAC1L_VOL_MASK 0x00FF
+
+/*
+ * R1553 (0x611) - DAC1 Right Volume
+ */
+/* DAC1R_MUTE */
+#define WM8994_DAC1R_MUTE_MASK 0x0200
+/* DAC1R_VOL - [7:0] */
+#define WM8994_DAC1R_VOL_MASK 0x00FF
+
+/*
+ * GPIO
+ */
+/* OUTPUT PIN */
+#define WM8994_GPIO_DIR_OUTPUT 0x8000
+/* GPIO PIN MASK */
+#define WM8994_GPIO_DIR_MASK 0xFFE0
+/* I2S CLK */
+#define WM8994_GPIO_FUNCTION_I2S_CLK 0x0000
+/* GPn FN */
+#define WM8994_GPIO_FUNCTION_MASK 0x001F
+#endif
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index f0b82c67f5..824d357d94 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -34,6 +34,7 @@ COBJS-$(CONFIG_BFIN_SPI) += bfin_spi.o
COBJS-$(CONFIG_CF_SPI) += cf_spi.o
COBJS-$(CONFIG_CF_QSPI) += cf_qspi.o
COBJS-$(CONFIG_DAVINCI_SPI) += davinci_spi.o
+COBJS-$(CONFIG_EXYNOS_SPI) += exynos_spi.o
COBJS-$(CONFIG_KIRKWOOD_SPI) += kirkwood_spi.o
COBJS-$(CONFIG_MPC52XX_SPI) += mpc52xx_spi.o
COBJS-$(CONFIG_MPC8XXX_SPI) += mpc8xxx_spi.o
diff --git a/drivers/spi/exynos_spi.c b/drivers/spi/exynos_spi.c
new file mode 100644
index 0000000000..3e6c18f87f
--- /dev/null
+++ b/drivers/spi/exynos_spi.c
@@ -0,0 +1,367 @@
+/*
+ * (C) Copyright 2012 SAMSUNG Electronics
+ * Padmavathi Venna <padma.v@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <spi.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch-exynos/spi.h>
+#include <asm/io.h>
+
+/* Information about each SPI controller */
+struct spi_bus {
+ enum periph_id periph_id;
+ s32 frequency; /* Default clock frequency, -1 for none */
+ struct exynos_spi *regs;
+ int inited; /* 1 if this bus is ready for use */
+};
+
+/* A list of spi buses that we know about */
+static struct spi_bus spi_bus[EXYNOS5_SPI_NUM_CONTROLLERS];
+
+struct exynos_spi_slave {
+ struct spi_slave slave;
+ struct exynos_spi *regs;
+ unsigned int freq; /* Default frequency */
+ unsigned int mode;
+ enum periph_id periph_id; /* Peripheral ID for this device */
+ unsigned int fifo_size;
+};
+
+static struct spi_bus *spi_get_bus(unsigned dev_index)
+{
+ if (dev_index < EXYNOS5_SPI_NUM_CONTROLLERS)
+ return &spi_bus[dev_index];
+ debug("%s: invalid bus %d", __func__, dev_index);
+
+ return NULL;
+}
+
+static inline struct exynos_spi_slave *to_exynos_spi(struct spi_slave *slave)
+{
+ return container_of(slave, struct exynos_spi_slave, slave);
+}
+
+/**
+ * Setup the driver private data
+ *
+ * @param bus ID of the bus that the slave is attached to
+ * @param cs ID of the chip select connected to the slave
+ * @param max_hz Required spi frequency
+ * @param mode Required spi mode (clk polarity, clk phase and
+ * master or slave)
+ * @return new device or NULL
+ */
+struct spi_slave *spi_setup_slave(unsigned int busnum, unsigned int cs,
+ unsigned int max_hz, unsigned int mode)
+{
+ struct exynos_spi_slave *spi_slave;
+ struct spi_bus *bus;
+
+ if (!spi_cs_is_valid(busnum, cs)) {
+ debug("%s: Invalid bus/chip select %d, %d\n", __func__,
+ busnum, cs);
+ return NULL;
+ }
+
+ spi_slave = malloc(sizeof(*spi_slave));
+ if (!spi_slave) {
+ debug("%s: Could not allocate spi_slave\n", __func__);
+ return NULL;
+ }
+
+ bus = &spi_bus[busnum];
+ spi_slave->slave.bus = busnum;
+ spi_slave->slave.cs = cs;
+ spi_slave->regs = bus->regs;
+ spi_slave->mode = mode;
+ spi_slave->periph_id = bus->periph_id;
+ if (bus->periph_id == PERIPH_ID_SPI1 ||
+ bus->periph_id == PERIPH_ID_SPI2)
+ spi_slave->fifo_size = 64;
+ else
+ spi_slave->fifo_size = 256;
+
+ spi_slave->freq = bus->frequency;
+ if (max_hz)
+ spi_slave->freq = min(max_hz, spi_slave->freq);
+
+ return &spi_slave->slave;
+}
+
+/**
+ * Free spi controller
+ *
+ * @param slave Pointer to spi_slave to which controller has to
+ * communicate with
+ */
+void spi_free_slave(struct spi_slave *slave)
+{
+ struct exynos_spi_slave *spi_slave = to_exynos_spi(slave);
+
+ free(spi_slave);
+}
+
+/**
+ * Flush spi tx, rx fifos and reset the SPI controller
+ *
+ * @param slave Pointer to spi_slave to which controller has to
+ * communicate with
+ */
+static void spi_flush_fifo(struct spi_slave *slave)
+{
+ struct exynos_spi_slave *spi_slave = to_exynos_spi(slave);
+ struct exynos_spi *regs = spi_slave->regs;
+
+ clrsetbits_le32(&regs->ch_cfg, SPI_CH_HS_EN, SPI_CH_RST);
+ clrbits_le32(&regs->ch_cfg, SPI_CH_RST);
+ setbits_le32(&regs->ch_cfg, SPI_TX_CH_ON | SPI_RX_CH_ON);
+}
+
+/**
+ * Initialize the spi base registers, set the required clock frequency and
+ * initialize the gpios
+ *
+ * @param slave Pointer to spi_slave to which controller has to
+ * communicate with
+ * @return zero on success else a negative value
+ */
+int spi_claim_bus(struct spi_slave *slave)
+{
+ struct exynos_spi_slave *spi_slave = to_exynos_spi(slave);
+ struct exynos_spi *regs = spi_slave->regs;
+ u32 reg = 0;
+ int ret;
+
+ ret = set_spi_clk(spi_slave->periph_id,
+ spi_slave->freq);
+ if (ret < 0) {
+ debug("%s: Failed to setup spi clock\n", __func__);
+ return ret;
+ }
+
+ exynos_pinmux_config(spi_slave->periph_id, PINMUX_FLAG_NONE);
+
+ spi_flush_fifo(slave);
+
+ reg = readl(&regs->ch_cfg);
+ reg &= ~(SPI_CH_CPHA_B | SPI_CH_CPOL_L);
+
+ if (spi_slave->mode & SPI_CPHA)
+ reg |= SPI_CH_CPHA_B;
+
+ if (spi_slave->mode & SPI_CPOL)
+ reg |= SPI_CH_CPOL_L;
+
+ writel(reg, &regs->ch_cfg);
+ writel(SPI_FB_DELAY_180, &regs->fb_clk);
+
+ return 0;
+}
+
+/**
+ * Reset the spi H/W and flush the tx and rx fifos
+ *
+ * @param slave Pointer to spi_slave to which controller has to
+ * communicate with
+ */
+void spi_release_bus(struct spi_slave *slave)
+{
+ spi_flush_fifo(slave);
+}
+
+static void spi_get_fifo_levels(struct exynos_spi *regs,
+ int *rx_lvl, int *tx_lvl)
+{
+ uint32_t spi_sts = readl(&regs->spi_sts);
+
+ *rx_lvl = (spi_sts >> SPI_RX_LVL_OFFSET) & SPI_FIFO_LVL_MASK;
+ *tx_lvl = (spi_sts >> SPI_TX_LVL_OFFSET) & SPI_FIFO_LVL_MASK;
+}
+
+/**
+ * If there's something to transfer, do a software reset and set a
+ * transaction size.
+ *
+ * @param regs SPI peripheral registers
+ * @param count Number of bytes to transfer
+ */
+static void spi_request_bytes(struct exynos_spi *regs, int count)
+{
+ assert(count && count < (1 << 16));
+ setbits_le32(&regs->ch_cfg, SPI_CH_RST);
+ clrbits_le32(&regs->ch_cfg, SPI_CH_RST);
+ writel(count | SPI_PACKET_CNT_EN, &regs->pkt_cnt);
+}
+
+static void spi_rx_tx(struct exynos_spi_slave *spi_slave, int todo,
+ void **dinp, void const **doutp)
+{
+ struct exynos_spi *regs = spi_slave->regs;
+ uchar *rxp = *dinp;
+ const uchar *txp = *doutp;
+ int rx_lvl, tx_lvl;
+ uint out_bytes, in_bytes;
+
+ out_bytes = in_bytes = todo;
+
+ /*
+ * If there's something to send, do a software reset and set a
+ * transaction size.
+ */
+ spi_request_bytes(regs, todo);
+
+ /*
+ * Bytes are transmitted/received in pairs. Wait to receive all the
+ * data because then transmission will be done as well.
+ */
+ while (in_bytes) {
+ int temp;
+
+ /* Keep the fifos full/empty. */
+ spi_get_fifo_levels(regs, &rx_lvl, &tx_lvl);
+ if (tx_lvl < spi_slave->fifo_size && out_bytes) {
+ temp = txp ? *txp++ : 0xff;
+ writel(temp, &regs->tx_data);
+ out_bytes--;
+ }
+ if (rx_lvl > 0 && in_bytes) {
+ temp = readl(&regs->rx_data);
+ if (rxp)
+ *rxp++ = temp;
+ in_bytes--;
+ }
+ }
+ *dinp = rxp;
+ *doutp = txp;
+}
+
+/**
+ * Transfer and receive data
+ *
+ * @param slave Pointer to spi_slave to which controller has to
+ * communicate with
+ * @param bitlen No of bits to tranfer or receive
+ * @param dout Pointer to transfer buffer
+ * @param din Pointer to receive buffer
+ * @param flags Flags for transfer begin and end
+ * @return zero on success else a negative value
+ */
+int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
+ void *din, unsigned long flags)
+{
+ struct exynos_spi_slave *spi_slave = to_exynos_spi(slave);
+ int upto, todo;
+ int bytelen;
+
+ /* spi core configured to do 8 bit transfers */
+ if (bitlen % 8) {
+ debug("Non byte aligned SPI transfer.\n");
+ return -1;
+ }
+
+ /* Start the transaction, if necessary. */
+ if ((flags & SPI_XFER_BEGIN))
+ spi_cs_activate(slave);
+
+ /* Exynos SPI limits each transfer to 65535 bytes */
+ bytelen = bitlen / 8;
+ for (upto = 0; upto < bytelen; upto += todo) {
+ todo = min(bytelen - upto, (1 << 16) - 1);
+ spi_rx_tx(spi_slave, todo, &din, &dout);
+ }
+
+ /* Stop the transaction, if necessary. */
+ if ((flags & SPI_XFER_END))
+ spi_cs_deactivate(slave);
+
+ return 0;
+}
+
+/**
+ * Validates the bus and chip select numbers
+ *
+ * @param bus ID of the bus that the slave is attached to
+ * @param cs ID of the chip select connected to the slave
+ * @return one on success else zero
+ */
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ return spi_get_bus(bus) && cs == 0;
+}
+
+/**
+ * Activate the CS by driving it LOW
+ *
+ * @param slave Pointer to spi_slave to which controller has to
+ * communicate with
+ */
+void spi_cs_activate(struct spi_slave *slave)
+{
+ struct exynos_spi_slave *spi_slave = to_exynos_spi(slave);
+
+ clrbits_le32(&spi_slave->regs->cs_reg, SPI_SLAVE_SIG_INACT);
+ debug("Activate CS, bus %d\n", spi_slave->slave.bus);
+}
+
+/**
+ * Deactivate the CS by driving it HIGH
+ *
+ * @param slave Pointer to spi_slave to which controller has to
+ * communicate with
+ */
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+ struct exynos_spi_slave *spi_slave = to_exynos_spi(slave);
+
+ setbits_le32(&spi_slave->regs->cs_reg, SPI_SLAVE_SIG_INACT);
+ debug("Deactivate CS, bus %d\n", spi_slave->slave.bus);
+}
+
+static inline struct exynos_spi *get_spi_base(int dev_index)
+{
+ if (dev_index < 3)
+ return (struct exynos_spi *)samsung_get_base_spi() + dev_index;
+ else
+ return (struct exynos_spi *)samsung_get_base_spi_isp() +
+ (dev_index - 3);
+}
+
+/* Sadly there is no error return from this function */
+void spi_init(void)
+{
+ int i;
+ struct spi_bus *bus;
+
+ for (i = 0; i < EXYNOS5_SPI_NUM_CONTROLLERS; i++) {
+ bus = &spi_bus[i];
+ bus->regs = get_spi_base(i);
+ bus->periph_id = PERIPH_ID_SPI0 + i;
+
+ /* Although Exynos5 supports upto 50Mhz speed,
+ * we are setting it to 10Mhz for safe side
+ */
+ bus->frequency = 10000000;
+ bus->inited = 1;
+ }
+}
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index ebb6da823c..b3207c83c3 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -37,6 +37,7 @@ COBJS-$(CONFIG_EXYNOS_PWM_BL) += exynos_pwm_bl.o
COBJS-$(CONFIG_FSL_DIU_FB) += fsl_diu_fb.o videomodes.o
COBJS-$(CONFIG_S6E8AX0) += s6e8ax0.o
COBJS-$(CONFIG_S6E63D6) += s6e63d6.o
+COBJS-$(CONFIG_LD9040) += ld9040.o
COBJS-$(CONFIG_SED156X) += sed156x.o
COBJS-$(CONFIG_VIDEO_AMBA) += amba.o
COBJS-$(CONFIG_VIDEO_CT69000) += ct69000.o videomodes.o
@@ -49,6 +50,7 @@ COBJS-$(CONFIG_VIDEO_OMAP3) += omap3_dss.o
COBJS-$(CONFIG_VIDEO_SED13806) += sed13806.o
COBJS-$(CONFIG_VIDEO_SM501) += sm501.o
COBJS-$(CONFIG_VIDEO_SMI_LYNXEM) += smiLynxEM.o videomodes.o
+COBJS-$(CONFIG_VIDEO_TEGRA) += tegra.o
COBJS-$(CONFIG_VIDEO_VCXK) += bus_vcxk.o
COBJS := $(sort $(COBJS-y))
diff --git a/drivers/video/exynos_fb.c b/drivers/video/exynos_fb.c
index e31a0fd500..d9a3f9ab18 100644
--- a/drivers/video/exynos_fb.c
+++ b/drivers/video/exynos_fb.c
@@ -70,8 +70,19 @@ static void draw_logo(void)
int x, y;
ulong addr;
- x = ((panel_width - panel_info.logo_width) >> 1);
- y = ((panel_height - panel_info.logo_height) >> 1) - 4;
+ if (panel_width >= panel_info.logo_width) {
+ x = ((panel_width - panel_info.logo_width) >> 1);
+ } else {
+ x = 0;
+ printf("Warning: image width is bigger than display width\n");
+ }
+
+ if (panel_height >= panel_info.logo_height) {
+ y = ((panel_height - panel_info.logo_height) >> 1) - 4;
+ } else {
+ y = 0;
+ printf("Warning: image height is bigger than display height\n");
+ }
addr = panel_info.logo_addr;
bmp_display(addr, x, y);
diff --git a/drivers/video/ld9040.c b/drivers/video/ld9040.c
new file mode 100644
index 0000000000..c01ae12bbc
--- /dev/null
+++ b/drivers/video/ld9040.c
@@ -0,0 +1,144 @@
+/*
+ * ld9040 AMOLED LCD panel driver.
+ *
+ * Copyright (C) 2012 Samsung Electronics
+ * Donghwa Lee <dh09.lee@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <spi.h>
+
+static const unsigned char SEQ_SWRESET[] = {
+ 0x01,
+};
+
+static const unsigned char SEQ_USER_SETTING[] = {
+ 0xF0, 0x5A, 0x5A
+};
+
+static const unsigned char SEQ_ELVSS_ON[] = {
+ 0xB1, 0x0D, 0x00, 0x16,
+};
+
+static const unsigned char SEQ_TEMP_SWIRE[] = {
+ 0xB2, 0x06, 0x06, 0x06, 0x06,
+};
+
+static const unsigned char SEQ_GTCON[] = {
+ 0xF7, 0x09, 0x00, 0x00,
+};
+
+static const unsigned char SEQ_PANEL_CONDITION[] = {
+ 0xF8, 0x05, 0x65, 0x96, 0x71, 0x7D, 0x19, 0x3B,
+ 0x0D, 0x19, 0x7E, 0x0D, 0xE2, 0x00, 0x00, 0x7E,
+ 0x7D, 0x07, 0x07, 0x20, 0x20, 0x20, 0x02, 0x02,
+};
+
+static const unsigned char SEQ_GAMMA_SET1[] = {
+ 0xF9, 0x00, 0xA7, 0xB4, 0xAE, 0xBF, 0x00, 0x91,
+ 0x00, 0xB2, 0xB4, 0xAA, 0xBB, 0x00, 0xAC, 0x00,
+ 0xB3, 0xB1, 0xAA, 0xBC, 0x00, 0xB3,
+};
+
+static const unsigned char SEQ_GAMMA_CTRL[] = {
+ 0xFB, 0x02, 0x5A,
+};
+
+static const unsigned char SEQ_APON[] = {
+ 0xF3, 0x00, 0x00, 0x00, 0x0A, 0x02,
+};
+
+static const unsigned char SEQ_DISPCTL[] = {
+ 0xF2, 0x02, 0x08, 0x08, 0x10, 0x10,
+};
+
+static const unsigned char SEQ_MANPWR[] = {
+ 0xB0, 0x04,
+};
+
+static const unsigned char SEQ_PWR_CTRL[] = {
+ 0xF4, 0x0A, 0x87, 0x25, 0x6A, 0x44, 0x02, 0x88,
+};
+
+static const unsigned char SEQ_SLPOUT[] = {
+ 0x11,
+};
+
+static const unsigned char SEQ_SLPIN[] = {
+ 0x10,
+};
+
+static const unsigned char SEQ_DISPON[] = {
+ 0x29,
+};
+
+static const unsigned char SEQ_DISPOFF[] = {
+ 0x28,
+};
+
+static void ld9040_spi_write(const unsigned char *wbuf, unsigned int size_cmd)
+{
+ int i = 0;
+
+ /*
+ * Data are transmitted in 9-bit words:
+ * the first bit is command/parameter, the other are the value.
+ * The value's LSB is shifted to MSB position, to be sent as 9th bit
+ */
+
+ unsigned int data_out = 0, data_in = 0;
+ for (i = 0; i < size_cmd; i++) {
+ data_out = wbuf[i] >> 1;
+ if (i != 0)
+ data_out += 0x0080;
+ if (wbuf[i] & 0x01)
+ data_out += 0x8000;
+ spi_xfer(NULL, 9, &data_out, &data_in, SPI_XFER_BEGIN);
+ }
+}
+
+void ld9040_cfg_ldo(void)
+{
+ udelay(10);
+
+ ld9040_spi_write(SEQ_USER_SETTING,
+ ARRAY_SIZE(SEQ_USER_SETTING));
+ ld9040_spi_write(SEQ_PANEL_CONDITION,
+ ARRAY_SIZE(SEQ_PANEL_CONDITION));
+ ld9040_spi_write(SEQ_DISPCTL, ARRAY_SIZE(SEQ_DISPCTL));
+ ld9040_spi_write(SEQ_MANPWR, ARRAY_SIZE(SEQ_MANPWR));
+ ld9040_spi_write(SEQ_PWR_CTRL, ARRAY_SIZE(SEQ_PWR_CTRL));
+ ld9040_spi_write(SEQ_ELVSS_ON, ARRAY_SIZE(SEQ_ELVSS_ON));
+ ld9040_spi_write(SEQ_GTCON, ARRAY_SIZE(SEQ_GTCON));
+ ld9040_spi_write(SEQ_GAMMA_SET1, ARRAY_SIZE(SEQ_GAMMA_SET1));
+ ld9040_spi_write(SEQ_GAMMA_CTRL, ARRAY_SIZE(SEQ_GAMMA_CTRL));
+ ld9040_spi_write(SEQ_SLPOUT, ARRAY_SIZE(SEQ_SLPOUT));
+
+ udelay(120);
+}
+
+void ld9040_enable_ldo(unsigned int onoff)
+{
+ if (onoff)
+ ld9040_spi_write(SEQ_DISPON, ARRAY_SIZE(SEQ_DISPON));
+ else
+ ld9040_spi_write(SEQ_DISPOFF, ARRAY_SIZE(SEQ_DISPOFF));
+}
diff --git a/drivers/video/tegra.c b/drivers/video/tegra.c
new file mode 100644
index 0000000000..750a283438
--- /dev/null
+++ b/drivers/video/tegra.c
@@ -0,0 +1,379 @@
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+#include <lcd.h>
+
+#include <asm/system.h>
+#include <asm/gpio.h>
+
+#include <asm/arch/clock.h>
+#include <asm/arch/funcmux.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/pwm.h>
+#include <asm/arch/display.h>
+#include <asm/arch-tegra/timer.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* These are the stages we go throuh in enabling the LCD */
+enum stage_t {
+ STAGE_START,
+ STAGE_PANEL_VDD,
+ STAGE_LVDS,
+ STAGE_BACKLIGHT_VDD,
+ STAGE_PWM,
+ STAGE_BACKLIGHT_EN,
+ STAGE_DONE,
+};
+
+static enum stage_t stage; /* Current stage we are at */
+static unsigned long timer_next; /* Time we can move onto next stage */
+
+/* Our LCD config, set up in handle_stage() */
+static struct fdt_panel_config config;
+struct fdt_disp_config *disp_config; /* Display controller config */
+
+enum {
+ /* Maximum LCD size we support */
+ LCD_MAX_WIDTH = 1366,
+ LCD_MAX_HEIGHT = 768,
+ LCD_MAX_LOG2_BPP = 4, /* 2^4 = 16 bpp */
+};
+
+int lcd_line_length;
+int lcd_color_fg;
+int lcd_color_bg;
+
+void *lcd_base; /* Start of framebuffer memory */
+void *lcd_console_address; /* Start of console buffer */
+
+short console_col;
+short console_row;
+
+vidinfo_t panel_info = {
+ /* Insert a value here so that we don't end up in the BSS */
+ .vl_col = -1,
+};
+
+char lcd_cursor_enabled;
+
+ushort lcd_cursor_width;
+ushort lcd_cursor_height;
+
+#ifndef CONFIG_OF_CONTROL
+#error "You must enable CONFIG_OF_CONTROL to get Tegra LCD support"
+#endif
+
+void lcd_cursor_size(ushort width, ushort height)
+{
+ lcd_cursor_width = width;
+ lcd_cursor_height = height;
+}
+
+void lcd_toggle_cursor(void)
+{
+ ushort x, y;
+ uchar *dest;
+ ushort row;
+
+ x = console_col * lcd_cursor_width;
+ y = console_row * lcd_cursor_height;
+ dest = (uchar *)(lcd_base + y * lcd_line_length + x * (1 << LCD_BPP) /
+ 8);
+
+ for (row = 0; row < lcd_cursor_height; ++row, dest += lcd_line_length) {
+ ushort *d = (ushort *)dest;
+ ushort color;
+ int i;
+
+ for (i = 0; i < lcd_cursor_width; ++i) {
+ color = *d;
+ color ^= lcd_color_fg;
+ *d = color;
+ ++d;
+ }
+ }
+}
+
+void lcd_cursor_on(void)
+{
+ lcd_cursor_enabled = 1;
+ lcd_toggle_cursor();
+}
+void lcd_cursor_off(void)
+{
+ lcd_cursor_enabled = 0;
+ lcd_toggle_cursor();
+}
+
+char lcd_is_cursor_enabled(void)
+{
+ return lcd_cursor_enabled;
+}
+
+static void update_panel_size(struct fdt_disp_config *config)
+{
+ panel_info.vl_col = config->width;
+ panel_info.vl_row = config->height;
+ panel_info.vl_bpix = config->log2_bpp;
+}
+
+/*
+ * Main init function called by lcd driver.
+ * Inits and then prints test pattern if required.
+ */
+
+void lcd_ctrl_init(void *lcdbase)
+{
+ int line_length, size;
+ int type = DCACHE_OFF;
+
+ assert(disp_config);
+
+ lcd_base = (void *)disp_config->frame_buffer;
+
+ /* Make sure that we can acommodate the selected LCD */
+ assert(disp_config->width <= LCD_MAX_WIDTH);
+ assert(disp_config->height <= LCD_MAX_HEIGHT);
+ assert(disp_config->log2_bpp <= LCD_MAX_LOG2_BPP);
+ if (disp_config->width <= LCD_MAX_WIDTH
+ && disp_config->height <= LCD_MAX_HEIGHT
+ && disp_config->log2_bpp <= LCD_MAX_LOG2_BPP)
+ update_panel_size(disp_config);
+ size = lcd_get_size(&line_length);
+
+ /* Set up the LCD caching as requested */
+ if (config.cache_type & FDT_LCD_CACHE_WRITE_THROUGH)
+ type = DCACHE_WRITETHROUGH;
+ else if (config.cache_type & FDT_LCD_CACHE_WRITE_BACK)
+ type = DCACHE_WRITEBACK;
+ mmu_set_region_dcache_behaviour(disp_config->frame_buffer, size, type);
+
+ /* Enable flushing after LCD writes if requested */
+ lcd_set_flush_dcache(config.cache_type & FDT_LCD_CACHE_FLUSH);
+
+ debug("LCD frame buffer at %p\n", lcd_base);
+}
+
+ulong calc_fbsize(void)
+{
+ return (panel_info.vl_col * panel_info.vl_row *
+ NBITS(panel_info.vl_bpix)) / 8;
+}
+
+void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue)
+{
+}
+
+void tegra_lcd_early_init(const void *blob)
+{
+ /*
+ * Go with the maximum size for now. We will fix this up after
+ * relocation. These values are only used for memory alocation.
+ */
+ panel_info.vl_col = LCD_MAX_WIDTH;
+ panel_info.vl_row = LCD_MAX_HEIGHT;
+ panel_info.vl_bpix = LCD_MAX_LOG2_BPP;
+}
+
+/**
+ * Decode the panel information from the fdt.
+ *
+ * @param blob fdt blob
+ * @param config structure to store fdt config into
+ * @return 0 if ok, -ve on error
+ */
+static int fdt_decode_lcd(const void *blob, struct fdt_panel_config *config)
+{
+ int display_node;
+
+ disp_config = tegra_display_get_config();
+ if (!disp_config) {
+ debug("%s: Display controller is not configured\n", __func__);
+ return -1;
+ }
+ display_node = disp_config->panel_node;
+ if (display_node < 0) {
+ debug("%s: No panel configuration available\n", __func__);
+ return -1;
+ }
+
+ config->pwm_channel = pwm_request(blob, display_node, "nvidia,pwm");
+ if (config->pwm_channel < 0) {
+ debug("%s: Unable to request PWM channel\n", __func__);
+ return -1;
+ }
+
+ config->cache_type = fdtdec_get_int(blob, display_node,
+ "nvidia,cache-type",
+ FDT_LCD_CACHE_WRITE_BACK_FLUSH);
+
+ /* These GPIOs are all optional */
+ fdtdec_decode_gpio(blob, display_node, "nvidia,backlight-enable-gpios",
+ &config->backlight_en);
+ fdtdec_decode_gpio(blob, display_node, "nvidia,lvds-shutdown-gpios",
+ &config->lvds_shutdown);
+ fdtdec_decode_gpio(blob, display_node, "nvidia,backlight-vdd-gpios",
+ &config->backlight_vdd);
+ fdtdec_decode_gpio(blob, display_node, "nvidia,panel-vdd-gpios",
+ &config->panel_vdd);
+
+ return fdtdec_get_int_array(blob, display_node, "nvidia,panel-timings",
+ config->panel_timings, FDT_LCD_TIMINGS);
+}
+
+/**
+ * Handle the next stage of device init
+ */
+static int handle_stage(const void *blob)
+{
+ debug("%s: stage %d\n", __func__, stage);
+
+ /* do the things for this stage */
+ switch (stage) {
+ case STAGE_START:
+ /* Initialize the Tegra display controller */
+ if (tegra_display_probe(gd->fdt_blob, (void *)gd->fb_base)) {
+ printf("%s: Failed to probe display driver\n",
+ __func__);
+ return -1;
+ }
+
+ /* get panel details */
+ if (fdt_decode_lcd(blob, &config)) {
+ printf("No valid LCD information in device tree\n");
+ return -1;
+ }
+
+ /*
+ * It is possible that the FDT has requested that the LCD be
+ * disabled. We currently don't support this. It would require
+ * changes to U-Boot LCD subsystem to have LCD support
+ * compiled in but not used. An easier option might be to
+ * still have a frame buffer, but leave the backlight off and
+ * remove all mention of lcd in the stdout environment
+ * variable.
+ */
+
+ funcmux_select(PERIPH_ID_DISP1, FUNCMUX_DEFAULT);
+
+ fdtdec_setup_gpio(&config.panel_vdd);
+ fdtdec_setup_gpio(&config.lvds_shutdown);
+ fdtdec_setup_gpio(&config.backlight_vdd);
+ fdtdec_setup_gpio(&config.backlight_en);
+
+ /*
+ * TODO: If fdt includes output flag we can omit this code
+ * since fdtdec_setup_gpio will do it for us.
+ */
+ if (fdt_gpio_isvalid(&config.panel_vdd))
+ gpio_direction_output(config.panel_vdd.gpio, 0);
+ if (fdt_gpio_isvalid(&config.lvds_shutdown))
+ gpio_direction_output(config.lvds_shutdown.gpio, 0);
+ if (fdt_gpio_isvalid(&config.backlight_vdd))
+ gpio_direction_output(config.backlight_vdd.gpio, 0);
+ if (fdt_gpio_isvalid(&config.backlight_en))
+ gpio_direction_output(config.backlight_en.gpio, 0);
+ break;
+ case STAGE_PANEL_VDD:
+ if (fdt_gpio_isvalid(&config.panel_vdd))
+ gpio_direction_output(config.panel_vdd.gpio, 1);
+ break;
+ case STAGE_LVDS:
+ if (fdt_gpio_isvalid(&config.lvds_shutdown))
+ gpio_set_value(config.lvds_shutdown.gpio, 1);
+ break;
+ case STAGE_BACKLIGHT_VDD:
+ if (fdt_gpio_isvalid(&config.backlight_vdd))
+ gpio_set_value(config.backlight_vdd.gpio, 1);
+ break;
+ case STAGE_PWM:
+ /* Enable PWM at 15/16 high, 32768 Hz with divider 1 */
+ pinmux_set_func(PINGRP_GPU, PMUX_FUNC_PWM);
+ pinmux_tristate_disable(PINGRP_GPU);
+
+ pwm_enable(config.pwm_channel, 32768, 0xdf, 1);
+ break;
+ case STAGE_BACKLIGHT_EN:
+ if (fdt_gpio_isvalid(&config.backlight_en))
+ gpio_set_value(config.backlight_en.gpio, 1);
+ break;
+ case STAGE_DONE:
+ break;
+ }
+
+ /* set up timer for next stage */
+ timer_next = timer_get_us();
+ if (stage < FDT_LCD_TIMINGS)
+ timer_next += config.panel_timings[stage] * 1000;
+
+ /* move to next stage */
+ stage++;
+ return 0;
+}
+
+int tegra_lcd_check_next_stage(const void *blob, int wait)
+{
+ if (stage == STAGE_DONE)
+ return 0;
+
+ do {
+ /* wait if we need to */
+ debug("%s: stage %d\n", __func__, stage);
+ if (stage != STAGE_START) {
+ int delay = timer_next - timer_get_us();
+
+ if (delay > 0) {
+ if (wait)
+ udelay(delay);
+ else
+ return 0;
+ }
+ }
+
+ if (handle_stage(blob))
+ return -1;
+ } while (wait && stage != STAGE_DONE);
+ if (stage == STAGE_DONE)
+ debug("%s: LCD init complete\n", __func__);
+
+ return 0;
+}
+
+void lcd_enable(void)
+{
+ /*
+ * Backlight and power init will be done separately in
+ * tegra_lcd_check_next_stage(), which should be called in
+ * board_late_init().
+ *
+ * U-Boot code supports only colour depth, selected at compile time.
+ * The device tree setting should match this. Otherwise the display
+ * will not look right, and U-Boot may crash.
+ */
+ if (disp_config->log2_bpp != LCD_BPP) {
+ printf("%s: Error: LCD depth configured in FDT (%d = %dbpp)"
+ " must match setting of LCD_BPP (%d)\n", __func__,
+ disp_config->log2_bpp, disp_config->bpp, LCD_BPP);
+ }
+}
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 923acb9f3a..bc09123910 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -28,6 +28,7 @@ LIB := $(obj)libwatchdog.o
COBJS-$(CONFIG_AT91SAM9_WATCHDOG) += at91sam9_wdt.o
COBJS-$(CONFIG_FTWDT010_WATCHDOG) += ftwdt010_wdt.o
COBJS-$(CONFIG_TNETV107X_WATCHDOG) += tnetv107x_wdt.o
+COBJS-$(CONFIG_S5P) += s5p_wdt.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
diff --git a/drivers/watchdog/s5p_wdt.c b/drivers/watchdog/s5p_wdt.c
new file mode 100644
index 0000000000..94acc1e4ba
--- /dev/null
+++ b/drivers/watchdog/s5p_wdt.c
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/watchdog.h>
+
+#define PRESCALER_VAL 255
+
+void wdt_stop(void)
+{
+ struct s5p_watchdog *wdt =
+ (struct s5p_watchdog *)samsung_get_base_watchdog();
+ unsigned int wtcon;
+
+ wtcon = readl(&wdt->wtcon);
+ wtcon &= ~(WTCON_EN | WTCON_INT | WTCON_RESET);
+
+ writel(wtcon, &wdt->wtcon);
+}
+
+void wdt_start(unsigned int timeout)
+{
+ struct s5p_watchdog *wdt =
+ (struct s5p_watchdog *)samsung_get_base_watchdog();
+ unsigned int wtcon;
+
+ wdt_stop();
+
+ wtcon = readl(&wdt->wtcon);
+ wtcon |= (WTCON_EN | WTCON_CLK(WTCON_CLK_128));
+ wtcon &= ~WTCON_INT;
+ wtcon |= WTCON_RESET;
+ wtcon |= WTCON_PRESCALER(PRESCALER_VAL);
+
+ writel(timeout, &wdt->wtdat);
+ writel(timeout, &wdt->wtcnt);
+ writel(wtcon, &wdt->wtcon);
+}
OpenPOWER on IntegriCloud