diff options
Diffstat (limited to 'drivers/usb/host/ehci-hcd.c')
| -rw-r--r-- | drivers/usb/host/ehci-hcd.c | 69 |
1 files changed, 34 insertions, 35 deletions
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 6323c50837..c671c72cb1 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -119,15 +119,12 @@ static struct descriptor { #define ehci_is_TDI() (0) #endif -int __ehci_get_port_speed(struct ehci_hcor *hcor, uint32_t reg) +__weak int ehci_get_port_speed(struct ehci_hcor *hcor, uint32_t reg) { return PORTSC_PSPD(reg); } -int ehci_get_port_speed(struct ehci_hcor *hcor, uint32_t reg) - __attribute__((weak, alias("__ehci_get_port_speed"))); - -void __ehci_set_usbmode(int index) +__weak void ehci_set_usbmode(int index) { uint32_t tmp; uint32_t *reg_ptr; @@ -141,17 +138,11 @@ void __ehci_set_usbmode(int index) ehci_writel(reg_ptr, tmp); } -void ehci_set_usbmode(int index) - __attribute__((weak, alias("__ehci_set_usbmode"))); - -void __ehci_powerup_fixup(uint32_t *status_reg, uint32_t *reg) +__weak void ehci_powerup_fixup(uint32_t *status_reg, uint32_t *reg) { mdelay(50); } -void ehci_powerup_fixup(uint32_t *status_reg, uint32_t *reg) - __attribute__((weak, alias("__ehci_powerup_fixup"))); - static int handshake(uint32_t *ptr, uint32_t mask, uint32_t done, int usec) { uint32_t result; @@ -1106,6 +1097,7 @@ submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer, } struct int_queue { + int elementsize; struct QH *first; struct QH *current; struct QH *last; @@ -1163,6 +1155,23 @@ create_int_queue(struct usb_device *dev, unsigned long pipe, int queuesize, struct int_queue *result = NULL; int i; + /* + * Interrupt transfers requiring several transactions are not supported + * because bInterval is ignored. + * + * Also, ehci_submit_async() relies on wMaxPacketSize being a power of 2 + * <= PKT_ALIGN if several qTDs are required, while the USB + * specification does not constrain this for interrupt transfers. That + * means that ehci_submit_async() would support interrupt transfers + * requiring several transactions only as long as the transfer size does + * not require more than a single qTD. + */ + if (elementsize > usb_maxpacket(dev, pipe)) { + printf("%s: xfers requiring several transactions are not supported.\n", + __func__); + return NULL; + } + debug("Enter create_int_queue\n"); if (usb_pipetype(pipe) != PIPE_INTERRUPT) { debug("non-interrupt pipe (type=%lu)", usb_pipetype(pipe)); @@ -1183,6 +1192,7 @@ create_int_queue(struct usb_device *dev, unsigned long pipe, int queuesize, debug("ehci intr queue: out of memory\n"); goto fail1; } + result->elementsize = elementsize; result->first = memalign(USB_DMA_MINALIGN, sizeof(struct QH) * queuesize); if (!result->first) { @@ -1258,9 +1268,11 @@ create_int_queue(struct usb_device *dev, unsigned long pipe, int queuesize, ALIGN_END_ADDR(struct qTD, result->tds, queuesize)); - if (disable_periodic(ctrl) < 0) { - debug("FATAL: periodic should never fail, but did"); - goto fail3; + if (ctrl->periodic_schedules > 0) { + if (disable_periodic(ctrl) < 0) { + debug("FATAL: periodic should never fail, but did"); + goto fail3; + } } /* hook up to periodic list */ @@ -1317,6 +1329,11 @@ void *poll_int_queue(struct usb_device *dev, struct int_queue *queue) queue->current++; else queue->current = NULL; + + invalidate_dcache_range((uint32_t)cur->buffer, + ALIGN_END_ADDR(char, cur->buffer, + queue->elementsize)); + debug("Exit poll_int_queue with completed intr transfer. token is %x at %p (first at %p)\n", hc32_to_cpu(cur_td->qt_token), cur, queue->first); return cur->buffer; @@ -1382,24 +1399,9 @@ submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer, debug("dev=%p, pipe=%lu, buffer=%p, length=%d, interval=%d", dev, pipe, buffer, length, interval); - /* - * Interrupt transfers requiring several transactions are not supported - * because bInterval is ignored. - * - * Also, ehci_submit_async() relies on wMaxPacketSize being a power of 2 - * <= PKT_ALIGN if several qTDs are required, while the USB - * specification does not constrain this for interrupt transfers. That - * means that ehci_submit_async() would support interrupt transfers - * requiring several transactions only as long as the transfer size does - * not require more than a single qTD. - */ - if (length > usb_maxpacket(dev, pipe)) { - printf("%s: Interrupt transfers requiring several " - "transactions are not supported.\n", __func__); - return -1; - } - queue = create_int_queue(dev, pipe, 1, length, buffer); + if (!queue) + return -1; timeout = get_timer(0) + USB_TIMEOUT_MS(pipe); while ((backbuffer = poll_int_queue(dev, queue)) == NULL) @@ -1415,9 +1417,6 @@ submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer, return -EINVAL; } - invalidate_dcache_range((uint32_t)buffer, - ALIGN_END_ADDR(char, buffer, length)); - ret = destroy_int_queue(dev, queue); if (ret < 0) return ret; |
