diff options
Diffstat (limited to 'drivers/usb/gadget/s3c_udc_otg.c')
| -rw-r--r-- | drivers/usb/gadget/s3c_udc_otg.c | 79 |
1 files changed, 14 insertions, 65 deletions
diff --git a/drivers/usb/gadget/s3c_udc_otg.c b/drivers/usb/gadget/s3c_udc_otg.c index b9816dfe30..7653f03949 100644 --- a/drivers/usb/gadget/s3c_udc_otg.c +++ b/drivers/usb/gadget/s3c_udc_otg.c @@ -31,7 +31,6 @@ #include <asm/io.h> #include <asm/mach-types.h> -#include <asm/arch/gpio.h> #include "regs-otg.h" #include <usb/lin_gadget_compat.h> @@ -105,7 +104,7 @@ static void stop_activity(struct s3c_udc *dev, struct usb_gadget_driver *driver); static int udc_enable(struct s3c_udc *dev); static void udc_set_address(struct s3c_udc *dev, unsigned char address); -static void reconfig_usbd(void); +static void reconfig_usbd(struct s3c_udc *dev); static void set_max_pktsize(struct s3c_udc *dev, enum usb_device_speed speed); static void nuke(struct s3c_ep *ep, int status); static int s3c_udc_set_halt(struct usb_ep *_ep, int value); @@ -146,68 +145,14 @@ static struct usb_ep_ops s3c_ep_ops = { void __iomem *regs_otg; struct s3c_usbotg_reg *reg; -struct s3c_usbotg_phy *phy; -static unsigned int usb_phy_ctrl; bool dfu_usb_get_reset(void) { return !!(readl(®->gintsts) & INT_RESET); } -void otg_phy_init(struct s3c_udc *dev) -{ - dev->pdata->phy_control(1); - - /*USB PHY0 Enable */ - printf("USB PHY0 Enable\n"); - - /* Enable PHY */ - writel(readl(usb_phy_ctrl) | USB_PHY_CTRL_EN0, usb_phy_ctrl); - - if (dev->pdata->usb_flags == PHY0_SLEEP) /* C210 Universal */ - writel((readl(&phy->phypwr) - &~(PHY_0_SLEEP | OTG_DISABLE_0 | ANALOG_PWRDOWN) - &~FORCE_SUSPEND_0), &phy->phypwr); - else /* C110 GONI */ - writel((readl(&phy->phypwr) &~(OTG_DISABLE_0 | ANALOG_PWRDOWN) - &~FORCE_SUSPEND_0), &phy->phypwr); - - if (s5p_cpu_id == 0x4412) - writel((readl(&phy->phyclk) & ~(EXYNOS4X12_ID_PULLUP0 | - EXYNOS4X12_COMMON_ON_N0)) | EXYNOS4X12_CLK_SEL_24MHZ, - &phy->phyclk); /* PLL 24Mhz */ - else - writel((readl(&phy->phyclk) & ~(ID_PULLUP0 | COMMON_ON_N0)) | - CLK_SEL_24MHZ, &phy->phyclk); /* PLL 24Mhz */ - - writel((readl(&phy->rstcon) &~(LINK_SW_RST | PHYLNK_SW_RST)) - | PHY_SW_RST0, &phy->rstcon); - udelay(10); - writel(readl(&phy->rstcon) - &~(PHY_SW_RST0 | LINK_SW_RST | PHYLNK_SW_RST), &phy->rstcon); - udelay(10); -} - -void otg_phy_off(struct s3c_udc *dev) -{ - /* reset controller just in case */ - writel(PHY_SW_RST0, &phy->rstcon); - udelay(20); - writel(readl(&phy->phypwr) &~PHY_SW_RST0, &phy->rstcon); - udelay(20); - - writel(readl(&phy->phypwr) | OTG_DISABLE_0 | ANALOG_PWRDOWN - | FORCE_SUSPEND_0, &phy->phypwr); - - writel(readl(usb_phy_ctrl) &~USB_PHY_CTRL_EN0, usb_phy_ctrl); - - writel((readl(&phy->phyclk) & ~(ID_PULLUP0 | COMMON_ON_N0)), - &phy->phyclk); - - udelay(10000); - - dev->pdata->phy_control(0); -} +__weak void otg_phy_init(struct s3c_udc *dev) {} +__weak void otg_phy_off(struct s3c_udc *dev) {} /***********************************************************/ @@ -270,7 +215,7 @@ static int udc_enable(struct s3c_udc *dev) debug_cond(DEBUG_SETUP != 0, "%s: %p\n", __func__, dev); otg_phy_init(dev); - reconfig_usbd(); + reconfig_usbd(dev); debug_cond(DEBUG_SETUP != 0, "S3C USB 2.0 OTG Controller Core Initialized : 0x%x\n", @@ -451,15 +396,17 @@ static void stop_activity(struct s3c_udc *dev, udc_reinit(dev); } -static void reconfig_usbd(void) +static void reconfig_usbd(struct s3c_udc *dev) { /* 2. Soft-reset OTG Core and then unreset again. */ int i; unsigned int uTemp = writel(CORE_SOFT_RESET, ®->grstctl); + uint32_t dflt_gusbcfg; debug("Reseting OTG controller\n"); - writel(0<<15 /* PHY Low Power Clock sel*/ + dflt_gusbcfg = + 0<<15 /* PHY Low Power Clock sel*/ |1<<14 /* Non-Periodic TxFIFO Rewind Enable*/ |0x5<<10 /* Turnaround time*/ |0<<9 | 0<<8 /* [0:HNP disable,1:HNP enable][ 0:SRP disable*/ @@ -468,8 +415,12 @@ static void reconfig_usbd(void) |0<<6 /* 0: high speed utmi+, 1: full speed serial*/ |0<<4 /* 0: utmi+, 1:ulpi*/ |1<<3 /* phy i/f 0:8bit, 1:16bit*/ - |0x7<<0, /* HS/FS Timeout**/ - ®->gusbcfg); + |0x7<<0; /* HS/FS Timeout**/ + + if (dev->pdata->usb_gusbcfg) + dflt_gusbcfg = dev->pdata->usb_gusbcfg; + + writel(dflt_gusbcfg, ®->gusbcfg); /* 3. Put the OTG device core in the disconnected state.*/ uTemp = readl(®->dctl); @@ -854,9 +805,7 @@ int s3c_udc_probe(struct s3c_plat_otg_data *pdata) dev->pdata = pdata; - phy = (struct s3c_usbotg_phy *)pdata->regs_phy; reg = (struct s3c_usbotg_reg *)pdata->regs_otg; - usb_phy_ctrl = pdata->usb_phy_ctrl; /* regs_otg = (void *)pdata->regs_otg; */ |
