diff options
Diffstat (limited to 'drivers/power')
| -rw-r--r-- | drivers/power/Kconfig | 13 | ||||
| -rw-r--r-- | drivers/power/axp818.c | 37 |
2 files changed, 47 insertions, 3 deletions
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 3d49b872e8..10683a21d9 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -121,20 +121,24 @@ config AXP_DCDC5_VOLT config AXP_ALDO1_VOLT int "axp pmic (a)ldo1 voltage" - depends on AXP221_POWER + depends on AXP221_POWER || AXP818_POWER default 0 if MACH_SUN6I + default 1800 if MACH_SUN8I_A83T default 3000 if MACH_SUN8I ---help--- Set the voltage (mV) to program the axp pmic aldo1 at, set to 0 to disable aldo1. On A31 boards aldo1 is often used to power the wifi module. On A23 / A33 boards aldo1 is used for VCC-IO and should be 3.0V. + On A83T / H8 boards aldo1 is used for MIPI CSI, DSI, HDMI, EFUSE, and + should be 1.8V. config AXP_ALDO2_VOLT int "axp pmic (a)ldo2 voltage" depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP818_POWER default 3000 if AXP152_POWER || AXP209_POWER default 0 if MACH_SUN6I + default 1800 if MACH_SUN8I_A83T default 2500 if MACH_SUN8I ---help--- Set the voltage (mV) to program the axp pmic aldo2 at, set to 0 to @@ -143,18 +147,21 @@ config AXP_ALDO2_VOLT On A31 boards aldo2 is typically unused and should be disabled. On A31 boards aldo2 may be used for LPDDR2 then it should be 1.8V. On A23 / A33 boards aldo2 is used for VDD-DLL and should be 2.5V. + On A83T / H8 boards aldo2 powers VDD-DLL, VCC18-PLL, CPVDD, VDD18-ADC, + LPDDR2, and the codec. It should be 1.8V. config AXP_ALDO3_VOLT int "axp pmic (a)ldo3 voltage" depends on AXP209_POWER || AXP221_POWER || AXP818_POWER - default 0 if AXP209_POWER || AXP818_POWER + default 0 if AXP209_POWER default 3000 if MACH_SUN6I || MACH_SUN8I ---help--- Set the voltage (mV) to program the axp pmic aldo3 at, set to 0 to disable aldo3. On A10(s) / A13 / A20 boards aldo3 should be 2.8V. On A23 / A31 / A33 boards aldo3 is VCC-PLL and AVCC and should be 3.0V. - On A83T aldo3 is used for LVDS, DSI, MIPI, HDMI, etc. + On A83T / H8 boards aldo3 is AVCC, VCC-PL, and VCC-LED, and should be + 3.0V. config AXP_ALDO4_VOLT int "axp pmic (a)ldo4 voltage" diff --git a/drivers/power/axp818.c b/drivers/power/axp818.c index 3119b64ea1..e885d02984 100644 --- a/drivers/power/axp818.c +++ b/drivers/power/axp818.c @@ -110,6 +110,43 @@ int axp_set_dcdc5(unsigned int mvolt) AXP818_OUTPUT_CTRL1_DCDC5_EN); } +int axp_set_aldo(int aldo_num, unsigned int mvolt) +{ + int ret; + u8 cfg; + + if (aldo_num < 1 || aldo_num > 3) + return -EINVAL; + + if (mvolt == 0) + return pmic_bus_clrbits(AXP818_OUTPUT_CTRL3, + AXP818_OUTPUT_CTRL3_ALDO1_EN << (aldo_num - 1)); + + cfg = axp818_mvolt_to_cfg(mvolt, 700, 3300, 100); + ret = pmic_bus_write(AXP818_ALDO1_CTRL + (aldo_num - 1), cfg); + if (ret) + return ret; + + return pmic_bus_setbits(AXP818_OUTPUT_CTRL3, + AXP818_OUTPUT_CTRL3_ALDO1_EN << (aldo_num - 1)); +} + +/* TODO: re-work other AXP drivers to consolidate ALDO functions. */ +int axp_set_aldo1(unsigned int mvolt) +{ + return axp_set_aldo(1, mvolt); +} + +int axp_set_aldo2(unsigned int mvolt) +{ + return axp_set_aldo(2, mvolt); +} + +int axp_set_aldo3(unsigned int mvolt) +{ + return axp_set_aldo(3, mvolt); +} + int axp_set_dldo(int dldo_num, unsigned int mvolt) { int ret; |
