summaryrefslogtreecommitdiffstats
path: root/drivers/net/npe/include/IxUART.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/npe/include/IxUART.h')
-rw-r--r--drivers/net/npe/include/IxUART.h434
1 files changed, 0 insertions, 434 deletions
diff --git a/drivers/net/npe/include/IxUART.h b/drivers/net/npe/include/IxUART.h
deleted file mode 100644
index ff23b22fe7..0000000000
--- a/drivers/net/npe/include/IxUART.h
+++ /dev/null
@@ -1,434 +0,0 @@
-/**
- * @file IxUART.h
- *
- * @date 12-OCT-01
- *
- * @brief Public header for the Intel IXP400 internal UART, generic driver.
- *
- * Design Notes:
- * This driver allows you to perform the following functions:
- * Device Initialization,
- * send/receive characters.
- *
- * Perform Uart IOCTL for the following:
- * Set/Get the current baud rate,
- * set parity,
- * set the number of Stop bits,
- * set the character Length (5,6,7,8),
- * enable/disable Hardware flow control.
- *
- * Only Polled mode is supported for now.
- *
- *
- * @par
- * IXP400 SW Release version 2.0
- *
- * -- Copyright Notice --
- *
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- *
- * @par
- * SPDX-License-Identifier: BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
-*/
-
-/**
- * @defgroup IxUARTAccAPI IXP400 UART Access (IxUARTAcc) API
- *
- * @brief IXP400 UARTAcc Driver Public API
- *
- * @{
- */
-
-
-/* Defaults */
-
-/**
- * @defgroup DefaultDefines Defines for Default Values
- *
- * @brief Default values which can be used for UART configuration
- *
- * @sa ixUARTDev
- */
-
-/**
- * @def IX_UART_DEF_OPTS
- *
- * @brief The default hardware options to set the UART to -
- * no flow control, 8 bit word, 1 stop bit, no parity
- *
- * @ingroup DefaultDefines
- */
-#define IX_UART_DEF_OPTS (CLOCAL | CS8)
-
-/**
- * @def IX_UART_DEF_XMIT
- *
- * @brief The default UART FIFO size - must be no bigger than 64
- *
- * @ingroup DefaultDefines
- */
-#define IX_UART_DEF_XMIT 64
-
-/**
- * @def IX_UART_DEF_BAUD
- *
- * @brief The default UART baud rate - 9600
- *
- * @ingroup DefaultDefines
- */
-#define IX_UART_DEF_BAUD 9600
-
-/**
- * @def IX_UART_MIN_BAUD
- *
- * @brief The minimum UART baud rate - 9600
- *
- * @ingroup DefaultDefines
- */
-#define IX_UART_MIN_BAUD 9600
-
-/**
- * @def IX_UART_MAX_BAUD
- *
- * @brief The maximum UART baud rate - 926100
- *
- * @ingroup DefaultDefines
- */
-#define IX_UART_MAX_BAUD 926100
-
-/**
- * @def IX_UART_XTAL
- *
- * @brief The UART clock speed
- *
- * @ingroup DefaultDefines
- */
-#define IX_UART_XTAL 14745600
-
-
-
-/* IOCTL commands (Request codes) */
-
-/**
- * @defgroup IoctlCommandDefines Defines for IOCTL Commands
- *
- * @brief IOCTL Commands (Request codes) which can be used
- * with @ref ixUARTIoctl
- */
-
-
-/**
- * @ingroup IoctlCommandDefines
- *
- * @def IX_BAUD_SET
- *
- * @brief Set the baud rate
- */
-#define IX_BAUD_SET 0
-
-/**
- * @ingroup IoctlCommandDefines
- *
- * @def IX_BAUD_GET
- *
- * @brief Get the baud rate
- */
-#define IX_BAUD_GET 1
-
-/**
- * @ingroup IoctlCommandDefines
- * @def IX_MODE_SET
- * @brief Set the UART mode of operation
- */
-#define IX_MODE_SET 2
-
-/**
- * @ingroup IoctlCommandDefines
- *
- * @def IX_MODE_GET
- *
- * @brief Get the current UART mode of operation
- */
-#define IX_MODE_GET 3
-
-/**
- * @ingroup IoctlCommandDefines
- *
- * @def IX_OPTS_SET
- *
- * @brief Set the UART device options
- */
-#define IX_OPTS_SET 4
-
-/**
- * @ingroup IoctlCommandDefines
- *
- * @def IX_OPTS_GET
- *
- * @brief Get the UART device options
- */
-#define IX_OPTS_GET 5
-
-/**
- * @ingroup IoctlCommandDefines
- *
- * @def IX_STATS_GET
- *
- * @brief Get the UART statistics
- */
-#define IX_STATS_GET 6
-
-
-/* POSIX style ioctl arguments */
-
-/**
- * @defgroup IoctlArgDefines Defines for IOCTL Arguments
- *
- * @brief POSIX style IOCTL arguments which can be used
- * with @ref ixUARTIoctl
- *
- * @sa ixUARTMode
- */
-
-
-/**
- * @ingroup IoctlArgDefines
- *
- * @def CLOCAL
- *
- * @brief Software flow control
- */
-#ifdef CLOCAL
-#undef CLOCAL
-#endif
-#define CLOCAL 0x1
-
-/**
- * @ingroup IoctlArgDefines
- *
- * @def CREAD
- *
- * @brief Enable interrupt receiver
- */
-#ifdef CREAD
-#undef CREAD
-#endif
-#define CREAD 0x2
-
-/**
- * @ingroup IoctlArgDefines
- *
- * @def CSIZE
- *
- * @brief Characters size
- */
-#ifdef CSIZE
-#undef CSIZE
-#endif
-#define CSIZE 0xc
-
-/**
- * @ingroup IoctlArgDefines
- *
- * @def CS5
- *
- * @brief 5 bits
- */
-#ifdef CS5
-#undef CS5
-#endif
-#define CS5 0x0
-
-/**
- * @ingroup IoctlArgDefines
- *
- * @def CS6
- *
- * @brief 6 bits
- */
-#ifdef CS6
-#undef CS6
-#endif
-#define CS6 0x4
-
-/**
- * @ingroup IoctlArgDefines
- *
- * @def CS7
- *
- * @brief 7 bits
- */
-#ifdef CS7
-#undef CS7
-#endif
-#define CS7 0x8
-
-/**
- * @ingroup IoctlArgDefines
- *
- * @def CS8
- *
- * @brief 8 bits
- */
-#ifdef CS8
-#undef CS8
-#endif
-#define CS8 0xc
-
-/**
- * @ingroup IoctlArgDefines
- *
- * @def STOPB
- *
- * @brief Send two stop bits (else one)
- */
-#define STOPB 0x20
-
-/**
- * @ingroup IoctlArgDefines
- *
- * @def PARENB
- *
- * @brief Parity detection enabled (else disabled)
- */
-#ifdef PARENB
-#undef PARENB
-#endif
-#define PARENB 0x40
-
-/**
- * @ingroup IoctlArgDefines
- *
- * @def PARODD
- *
- * @brief Odd parity (else even)
- */
-#ifdef PARODD
-#undef PARODD
-#endif
-#define PARODD 0x80
-
-/**
- * @enum ixUARTMode
- * @brief The mode to set to UART to.
- */
-typedef enum
-{
- INTERRUPT=0, /**< Interrupt mode */
- POLLED, /**< Polled mode */
- LOOPBACK /**< Loopback mode */
-} ixUARTMode;
-
-/**
- * @struct ixUARTStats
- * @brief Statistics for the UART.
- */
-typedef struct
-{
- UINT32 rxCount;
- UINT32 txCount;
- UINT32 overrunErr;
- UINT32 parityErr;
- UINT32 framingErr;
- UINT32 breakErr;
-} ixUARTStats;
-
-/**
- * @struct ixUARTDev
- * @brief Device descriptor for the UART.
- */
-typedef struct
-{
- UINT8 *addr; /**< device base address */
- ixUARTMode mode; /**< interrupt, polled or loopback */
- int baudRate; /**< baud rate */
- int freq; /**< UART clock frequency */
- int options; /**< hardware options */
- int fifoSize; /**< FIFO xmit size */
-
- ixUARTStats stats; /**< device statistics */
-} ixUARTDev;
-
-/**
- * @ingroup IxUARTAccAPI
- *
- * @fn IX_STATUS ixUARTInit(ixUARTDev* pUART)
- *
- * @param pUART @ref ixUARTDev [in] - pointer to UART structure describing our device.
- *
- * @brief Initialise the UART. This puts the chip in a quiescent state.
- *
- * @pre The base address for the UART must contain a valid value.
- * Also the baud rate and hardware options must contain sensible values
- * otherwise the defaults will be used as defined in ixUART.h
- *
- * @post UART is initialized and ready to send and receive data.
- *
- * @note This function should only be called once per device.
- *
- * @retval IX_SUCCESS - UART device successfully initialised.
- * @retval IX_FAIL - Critical error, device not initialised.
- ***************************************************************************/
-PUBLIC IX_STATUS ixUARTInit(ixUARTDev* pUART);
-
-/**
- * @ingroup IxUARTAccAPI
- *
- * @fn IX_STATUS ixUARTPollOutput(ixUARTDev* pUART, int outChar)
- *
- * @param pUART @ref ixUARTDev [out] - pointer to UART structure describing our device.
- * @param outChar int [out] - character to transmit.
- *
- * @brief Transmit a character in polled mode.
- *
- * @pre UART device must be initialised.
- *
- * @retval IX_SUCCESS - character was successfully transmitted.
- * @retval IX_FAIL - output buffer is full (try again).
- ***************************************************************************/
-PUBLIC IX_STATUS ixUARTPollOutput(ixUARTDev* pUART, int outChar);
-
-/**
- * @ingroup IxUARTAccAPI
- *
- * @fn IX_STATUS ixUARTPollInput(ixUARTDev* pUART, char *inChar)
- *
- * @param pUART @ref ixUARTDev [in] - pointer to UART structure describing our device.
- * @param *inChar char [in] - character read from the device.
- *
- * @brief Receive a character in polled mode.
- *
- * @pre UART device must be initialised.
- *
- * @retval IX_SUCCESS - character was successfully read.
- * @retval IX_FAIL - input buffer empty (try again).
- ***************************************************************************/
-PUBLIC IX_STATUS ixUARTPollInput(ixUARTDev* pUART, char *inChar);
-
-/**
- * @ingroup IxUARTAccAPI
- *
- * @fn IX_STATUS ixUARTIoctl(ixUARTDev* pUART, int cmd, void* arg)
- *
- * @param pUART @ref ixUARTDev [in] - pointer to UART structure describing our device.
- * @param cmd int [in] - an ioctl request code.
- * @param arg void* [in] - optional argument used to set the device mode,
- * baud rate, and hardware options.
- *
- * @brief Perform I/O control routines on the device.
- *
- * @retval IX_SUCCESS - requested feature was set/read successfully.
- * @retval IX_FAIL - error setting/reading the requested feature.
- *
- * @sa IoctlCommandDefines
- * @sa IoctlArgDefines
- ***************************************************************************/
-PUBLIC IX_STATUS ixUARTIoctl(ixUARTDev* pUART, int cmd, void* arg);
-
-/**
- * @} defgroup IxUARTAcc
- */
OpenPOWER on IntegriCloud