diff options
Diffstat (limited to 'drivers/net/npe/include/IxQMgr.h')
| -rw-r--r-- | drivers/net/npe/include/IxQMgr.h | 2186 |
1 files changed, 0 insertions, 2186 deletions
diff --git a/drivers/net/npe/include/IxQMgr.h b/drivers/net/npe/include/IxQMgr.h deleted file mode 100644 index 23a45413bc..0000000000 --- a/drivers/net/npe/include/IxQMgr.h +++ /dev/null @@ -1,2186 +0,0 @@ -/** - * @file IxQMgr.h - * - * @date 30-Oct-2001 - * - * @brief This file contains the public API of IxQMgr component. - * - * Some functions contained in this module are inline to achieve better - * data-path performance. For this to work, the function definitions are - * contained in this header file. The "normal" use of inline functions - * is to use the inline functions in the module in which they are - * defined. In this case these inline functions are used in external - * modules and therefore the use of "inline extern". What this means - * is as follows: if a function foo is declared as "inline extern" this - * definition is only used for inlining, in no case is the function - * compiled on its own. If the compiler cannot inline the function it - * becomes an external reference. Therefore in IxQMgrQAccess.c all - * inline functions are defined without the "inline extern" specifier - * and so define the external references. In all other source files - * including this header file, these funtions are defined as "inline - * extern". - * - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- -*/ - -/* ------------------------------------------------------ - Doxygen group definitions - ------------------------------------------------------ */ -/** - * @defgroup IxQMgrAPI IXP400 Queue Manager (IxQMgr) API - * - * @brief The public API for the IXP400 QMgr component. - * - * IxQMgr is a low level interface to the AHB Queue Manager - * - * @{ - */ - -#ifndef IXQMGR_H -#define IXQMGR_H - -/* - * User defined include files - */ - -#include "IxOsal.h" - -/* - * Define QMgr's IoMem macros, in DC mode if in LE - * regular if in BE. (Note: For Linux LSP gold release - * may need to adjust mode. - */ -#if defined (__BIG_ENDIAN) - -#define IX_QMGR_INLINE_READ_LONG IX_OSAL_READ_LONG_BE -#define IX_QMGR_INLINE_WRITE_LONG IX_OSAL_WRITE_LONG_BE - -#else - -#define IX_QMGR_INLINE_READ_LONG IX_OSAL_READ_LONG_LE_DC -#define IX_QMGR_INLINE_WRITE_LONG IX_OSAL_WRITE_LONG_LE_DC - -#endif - -/* - * #defines and macros - */ - -/** -* -* @ingroup IxQMgrAPI -* -* @def IX_QMGR_INLINE -* -* @brief Inline definition, for inlining of Queue Access functions on API -* -* Please read the header information in this file for more details on the -* use of function inlining in this component. -* -*/ - -#ifndef __wince - -#ifdef IXQMGRQACCESS_C -/* If IXQMGRQACCESS_C is set then the IxQmgrQAccess.c is including this file - and must instantiate a concrete definition for each inlineable API function - whether or not that function actually gets inlined. */ -# ifdef NO_INLINE_APIS -# undef NO_INLINE_APIS -# endif -# define IX_QMGR_INLINE /* Empty Define */ -#else -# ifndef NO_INLINE_APIS -# define IX_QMGR_INLINE IX_OSAL_INLINE_EXTERN -# else -# define IX_QMGR_INLINE /* Empty Define */ -# endif -#endif - -#else /* ndef __wince */ - -# ifndef NO_INLINE_APIS -# define NO_INLINE_APIS -# endif -# define IX_QMGR_INLINE - -#endif - - -/** -* -* @ingroup IxQMgrAPI -* -* @def IX_QMGR_MAX_NUM_QUEUES -* -* @brief Number of queues supported by the AQM. -* -* This constant is used to indicate the number of AQM queues -* -*/ -#define IX_QMGR_MAX_NUM_QUEUES 64 - -/** -* -* @ingroup IxQMgrAPI -* -* @def IX_QMGR_MIN_QID -* -* @brief Minimum queue identifier. -* -* This constant is used to indicate the smallest queue identifier -* -*/ -#define IX_QMGR_MIN_QID IX_QMGR_QUEUE_0 - -/** -* -* @ingroup IxQMgrAPI -* -* @def IX_QMGR_MAX_QID -* -* @brief Maximum queue identifier. -* -* This constant is used to indicate the largest queue identifier -* -*/ -#define IX_QMGR_MAX_QID IX_QMGR_QUEUE_63 - -/** -* -* @ingroup IxQMgrAPI -* -* @def IX_QMGR_MIN_QUEUPP_QID -* -* @brief Minimum queue identifier for reduced functionality queues. -* -* This constant is used to indicate Minimum queue identifier for reduced -* functionality queues -* -*/ -#define IX_QMGR_MIN_QUEUPP_QID 32 - -/** -* -* @ingroup IxQMgrAPI -* -* @def IX_QMGR_MAX_QNAME_LEN -* -* @brief Maximum queue name length. -* -* This constant is used to indicate the maximum null terminated string length -* (excluding '\0') for a queue name -* -*/ -#define IX_QMGR_MAX_QNAME_LEN 16 - -/** - * - * @ingroup IxQMgrAPI - * - * @def IX_QMGR_WARNING - * - * @brief Warning return code. - * - * Execution complete, but there is a special case to handle - * - */ -#define IX_QMGR_WARNING 2 - -/** - * - * @ingroup IxQMgrAPI - * - * @def IX_QMGR_PARAMETER_ERROR - * - * @brief Parameter error return code (NULL pointer etc..). - * - * parameter error out of range/invalid - * - */ -#define IX_QMGR_PARAMETER_ERROR 3 - -/** - * - * @ingroup IxQMgrAPI - * - * @def IX_QMGR_INVALID_Q_ENTRY_SIZE - * - * @brief Invalid entry size return code. - * - * Invalid queue entry size for a queue read/write - * - */ -#define IX_QMGR_INVALID_Q_ENTRY_SIZE 4 - -/** - * - * @ingroup IxQMgrAPI - * - * @def IX_QMGR_INVALID_Q_ID - * - * @brief Invalid queue identifier return code. - * - * Invalid queue id, not in range 0-63 - * - */ -#define IX_QMGR_INVALID_Q_ID 5 - -/** - * - * @ingroup IxQMgrAPI - * - * @def IX_QMGR_INVALID_CB_ID - * - * @brief Invalid callback identifier return code. - * - * Invalid callback id - */ -#define IX_QMGR_INVALID_CB_ID 6 - -/** - * - * @ingroup IxQMgrAPI - * - * @def IX_QMGR_CB_ALREADY_SET - * - * @brief Callback set error return code. - * - * The specified callback has already been for this queue - * - */ -#define IX_QMGR_CB_ALREADY_SET 7 - -/** - * - * @ingroup IxQMgrAPI - * - * @def IX_QMGR_NO_AVAILABLE_SRAM - * - * @brief Sram consumed return code. - * - * All AQM Sram is consumed by queue configuration - * - */ -#define IX_QMGR_NO_AVAILABLE_SRAM 8 - -/** - * - * @ingroup IxQMgrAPI - * - * @def IX_QMGR_INVALID_INT_SOURCE_ID - * - * @brief Invalid queue interrupt source identifier return code. - * - * Invalid queue interrupt source given for notification enable - */ -#define IX_QMGR_INVALID_INT_SOURCE_ID 9 - -/** - * - * @ingroup IxQMgrAPI - * - * @def IX_QMGR_INVALID_QSIZE - * - * @brief Invalid queue size error code. - * - * Invalid queue size not one of 16,32, 64, 128 - * - * - */ -#define IX_QMGR_INVALID_QSIZE 10 - -/** - * - * @ingroup IxQMgrAPI - * - * @def IX_QMGR_INVALID_Q_WM - * - * @brief Invalid queue watermark return code. - * - * Invalid queue watermark given for watermark set - */ -#define IX_QMGR_INVALID_Q_WM 11 - -/** - * - * @ingroup IxQMgrAPI - * - * @def IX_QMGR_Q_NOT_CONFIGURED - * - * @brief Queue not configured return code. - * - * Returned to the client when a function has been called on an unconfigured - * queue - * - */ -#define IX_QMGR_Q_NOT_CONFIGURED 12 - -/** - * - * @ingroup IxQMgrAPI - * - * @def IX_QMGR_Q_ALREADY_CONFIGURED - * - * @brief Queue already configured return code. - * - * Returned to client to indicate that a queue has already been configured - */ -#define IX_QMGR_Q_ALREADY_CONFIGURED 13 - -/** - * - * @ingroup IxQMgrAPI - * - * @def IX_QMGR_Q_UNDERFLOW - * - * @brief Underflow return code. - * - * Underflow on a queue read has occurred - * - */ -#define IX_QMGR_Q_UNDERFLOW 14 - -/** - * - * @ingroup IxQMgrAPI - * - * @def IX_QMGR_Q_OVERFLOW - * - * @brief Overflow return code. - * - * Overflow on a queue write has occurred - * - */ -#define IX_QMGR_Q_OVERFLOW 15 - -/** - * - * @ingroup IxQMgrAPI - * - * @def IX_QMGR_Q_INVALID_PRIORITY - * - * @brief Invalid priority return code. - * - * Invalid priority, not one of 0,1,2 - */ -#define IX_QMGR_Q_INVALID_PRIORITY 16 - -/** - * - * @ingroup IxQMgrAPI - * - * @def IX_QMGR_ENTRY_INDEX_OUT_OF_BOUNDS - * - * @brief Entry index out of bounds return code. - * - * Entry index is greater than number of entries in queue. - */ -#define IX_QMGR_ENTRY_INDEX_OUT_OF_BOUNDS 17 - -/** - * - * @ingroup IxQMgrAPI - * - * @def ixQMgrDispatcherLoopRun - * - * @brief Map old function name ixQMgrDispatcherLoopRun () - * to @ref ixQMgrDispatcherLoopRunA0 (). - * - */ -#define ixQMgrDispatcherLoopRun ixQMgrDispatcherLoopRunA0 - - -/** - * - * @ingroup IxQMgrAPI - * - * @def IX_QMGR_QUEUE - * - * @brief Definition of AQM queue numbers - * - */ -#define IX_QMGR_QUEUE_0 (0) /**< Queue Number 0 */ -#define IX_QMGR_QUEUE_1 (1) /**< Queue Number 1 */ -#define IX_QMGR_QUEUE_2 (2) /**< Queue Number 2 */ -#define IX_QMGR_QUEUE_3 (3) /**< Queue Number 3 */ -#define IX_QMGR_QUEUE_4 (4) /**< Queue Number 4 */ -#define IX_QMGR_QUEUE_5 (5) /**< Queue Number 5 */ -#define IX_QMGR_QUEUE_6 (6) /**< Queue Number 6 */ -#define IX_QMGR_QUEUE_7 (7) /**< Queue Number 7 */ -#define IX_QMGR_QUEUE_8 (8) /**< Queue Number 8 */ -#define IX_QMGR_QUEUE_9 (9) /**< Queue Number 9 */ -#define IX_QMGR_QUEUE_10 (10) /**< Queue Number 10 */ -#define IX_QMGR_QUEUE_11 (11) /**< Queue Number 11 */ -#define IX_QMGR_QUEUE_12 (12) /**< Queue Number 12 */ -#define IX_QMGR_QUEUE_13 (13) /**< Queue Number 13 */ -#define IX_QMGR_QUEUE_14 (14) /**< Queue Number 14 */ -#define IX_QMGR_QUEUE_15 (15) /**< Queue Number 15 */ -#define IX_QMGR_QUEUE_16 (16) /**< Queue Number 16 */ -#define IX_QMGR_QUEUE_17 (17) /**< Queue Number 17 */ -#define IX_QMGR_QUEUE_18 (18) /**< Queue Number 18 */ -#define IX_QMGR_QUEUE_19 (19) /**< Queue Number 19 */ -#define IX_QMGR_QUEUE_20 (20) /**< Queue Number 20 */ -#define IX_QMGR_QUEUE_21 (21) /**< Queue Number 21 */ -#define IX_QMGR_QUEUE_22 (22) /**< Queue Number 22 */ -#define IX_QMGR_QUEUE_23 (23) /**< Queue Number 23 */ -#define IX_QMGR_QUEUE_24 (24) /**< Queue Number 24 */ -#define IX_QMGR_QUEUE_25 (25) /**< Queue Number 25 */ -#define IX_QMGR_QUEUE_26 (26) /**< Queue Number 26 */ -#define IX_QMGR_QUEUE_27 (27) /**< Queue Number 27 */ -#define IX_QMGR_QUEUE_28 (28) /**< Queue Number 28 */ -#define IX_QMGR_QUEUE_29 (29) /**< Queue Number 29 */ -#define IX_QMGR_QUEUE_30 (30) /**< Queue Number 30 */ -#define IX_QMGR_QUEUE_31 (31) /**< Queue Number 31 */ -#define IX_QMGR_QUEUE_32 (32) /**< Queue Number 32 */ -#define IX_QMGR_QUEUE_33 (33) /**< Queue Number 33 */ -#define IX_QMGR_QUEUE_34 (34) /**< Queue Number 34 */ -#define IX_QMGR_QUEUE_35 (35) /**< Queue Number 35 */ -#define IX_QMGR_QUEUE_36 (36) /**< Queue Number 36 */ -#define IX_QMGR_QUEUE_37 (37) /**< Queue Number 37 */ -#define IX_QMGR_QUEUE_38 (38) /**< Queue Number 38 */ -#define IX_QMGR_QUEUE_39 (39) /**< Queue Number 39 */ -#define IX_QMGR_QUEUE_40 (40) /**< Queue Number 40 */ -#define IX_QMGR_QUEUE_41 (41) /**< Queue Number 41 */ -#define IX_QMGR_QUEUE_42 (42) /**< Queue Number 42 */ -#define IX_QMGR_QUEUE_43 (43) /**< Queue Number 43 */ -#define IX_QMGR_QUEUE_44 (44) /**< Queue Number 44 */ -#define IX_QMGR_QUEUE_45 (45) /**< Queue Number 45 */ -#define IX_QMGR_QUEUE_46 (46) /**< Queue Number 46 */ -#define IX_QMGR_QUEUE_47 (47) /**< Queue Number 47 */ -#define IX_QMGR_QUEUE_48 (48) /**< Queue Number 48 */ -#define IX_QMGR_QUEUE_49 (49) /**< Queue Number 49 */ -#define IX_QMGR_QUEUE_50 (50) /**< Queue Number 50 */ -#define IX_QMGR_QUEUE_51 (51) /**< Queue Number 51 */ -#define IX_QMGR_QUEUE_52 (52) /**< Queue Number 52 */ -#define IX_QMGR_QUEUE_53 (53) /**< Queue Number 53 */ -#define IX_QMGR_QUEUE_54 (54) /**< Queue Number 54 */ -#define IX_QMGR_QUEUE_55 (55) /**< Queue Number 55 */ -#define IX_QMGR_QUEUE_56 (56) /**< Queue Number 56 */ -#define IX_QMGR_QUEUE_57 (57) /**< Queue Number 57 */ -#define IX_QMGR_QUEUE_58 (58) /**< Queue Number 58 */ -#define IX_QMGR_QUEUE_59 (59) /**< Queue Number 59 */ -#define IX_QMGR_QUEUE_60 (60) /**< Queue Number 60 */ -#define IX_QMGR_QUEUE_61 (61) /**< Queue Number 61 */ -#define IX_QMGR_QUEUE_62 (62) /**< Queue Number 62 */ -#define IX_QMGR_QUEUE_63 (63) /**< Queue Number 63 */ -#define IX_QMGR_QUEUE_INVALID (64) /**< AQM Queue Number Delimiter */ - - -/* - * Typedefs - */ - -/** - * @typedef IxQMgrQId - * - * @ingroup IxQMgrAPI - * - * @brief Used in the API to identify the AQM queues. - * - */ -typedef int IxQMgrQId; - -/** - * @typedef IxQMgrQStatus - * - * @ingroup IxQMgrAPI - * - * @brief Queue status. - * - * A queues status is defined by its relative fullness or relative emptiness. - * Each of the queues 0-31 have Nearly Empty, Nearly Full, Empty, Full, - * Underflow and Overflow status flags. Queues 32-63 have just Nearly Empty and - * Full status flags. - * The flags bit positions are outlined below: - * - * OF - bit-5<br> - * UF - bit-4<br> - * F - bit-3<br> - * NF - bit-2<br> - * NE - bit-1<br> - * E - bit-0<br> - * - */ -typedef UINT32 IxQMgrQStatus; - -/** - * @enum IxQMgrQStatusMask - * - * @ingroup IxQMgrAPI - * - * @brief Queue status mask. - * - * Masks for extracting the individual status flags from the IxQMgrStatus - * word. - * - */ -typedef enum -{ - IX_QMGR_Q_STATUS_E_BIT_MASK = 0x1, - IX_QMGR_Q_STATUS_NE_BIT_MASK = 0x2, - IX_QMGR_Q_STATUS_NF_BIT_MASK = 0x4, - IX_QMGR_Q_STATUS_F_BIT_MASK = 0x8, - IX_QMGR_Q_STATUS_UF_BIT_MASK = 0x10, - IX_QMGR_Q_STATUS_OF_BIT_MASK = 0x20 -} IxQMgrQStatusMask; - -/** - * @enum IxQMgrSourceId - * - * @ingroup IxQMgrAPI - * - * @brief Queue interrupt source select. - * - * This enum defines the different source conditions on a queue that result in - * an interrupt being fired by the AQM. Interrupt source is configurable for - * queues 0-31 only. The interrupt source for queues 32-63 is hardwired to the - * NE(Nearly Empty) status flag. - * - */ -typedef enum -{ - IX_QMGR_Q_SOURCE_ID_E = 0, /**< Queue Empty due to last read */ - IX_QMGR_Q_SOURCE_ID_NE, /**< Queue Nearly Empty due to last read */ - IX_QMGR_Q_SOURCE_ID_NF, /**< Queue Nearly Full due to last write */ - IX_QMGR_Q_SOURCE_ID_F, /**< Queue Full due to last write */ - IX_QMGR_Q_SOURCE_ID_NOT_E, /**< Queue Not Empty due to last write */ - IX_QMGR_Q_SOURCE_ID_NOT_NE, /**< Queue Not Nearly Empty due to last write */ - IX_QMGR_Q_SOURCE_ID_NOT_NF, /**< Queue Not Nearly Full due to last read */ - IX_QMGR_Q_SOURCE_ID_NOT_F /**< Queue Not Full due to last read */ -} IxQMgrSourceId; - -/** - * @enum IxQMgrQEntrySizeInWords - * - * @ingroup IxQMgrAPI - * - * @brief QMgr queue entry sizes. - * - * The entry size of a queue specifies the size of a queues entry in words. - * - */ -typedef enum -{ - IX_QMGR_Q_ENTRY_SIZE1 = 1, /**< 1 word entry */ - IX_QMGR_Q_ENTRY_SIZE2 = 2, /**< 2 word entry */ - IX_QMGR_Q_ENTRY_SIZE4 = 4 /**< 4 word entry */ -} IxQMgrQEntrySizeInWords; - -/** - * @enum IxQMgrQSizeInWords - * - * @ingroup IxQMgrAPI - * - * @brief QMgr queue sizes. - * - * These values define the allowed queue sizes for AQM queue. The sizes are - * specified in words. - * - */ -typedef enum -{ - IX_QMGR_Q_SIZE16 = 16, /**< 16 word buffer */ - IX_QMGR_Q_SIZE32 = 32, /**< 32 word buffer */ - IX_QMGR_Q_SIZE64 = 64, /**< 64 word buffer */ - IX_QMGR_Q_SIZE128 = 128, /**< 128 word buffer */ - IX_QMGR_Q_SIZE_INVALID = 129 /**< Insure that this is greater than largest - * queue size supported by the hardware - */ -} IxQMgrQSizeInWords; - -/** - * @enum IxQMgrWMLevel - * - * @ingroup IxQMgrAPI - * - * @brief QMgr watermark levels. - * - * These values define the valid watermark levels(in ENTRIES) for queues. Each - * queue 0-63 have configurable Nearly full and Nearly empty watermarks. For - * queues 32-63 the Nearly full watermark has NO EFFECT. - * If the Nearly full watermark is set to IX_QMGR_Q_WM_LEVEL16 this means that - * the nearly full flag will be set by the hardware when there are >= 16 empty - * entries in the specified queue. - * If the Nearly empty watermark is set to IX_QMGR_Q_WM_LEVEL16 this means that - * the Nearly empty flag will be set by the hardware when there are <= 16 full - * entries in the specified queue. - */ -typedef enum -{ - IX_QMGR_Q_WM_LEVEL0 = 0, /**< 0 entry watermark */ - IX_QMGR_Q_WM_LEVEL1 = 1, /**< 1 entry watermark */ - IX_QMGR_Q_WM_LEVEL2 = 2, /**< 2 entry watermark */ - IX_QMGR_Q_WM_LEVEL4 = 4, /**< 4 entry watermark */ - IX_QMGR_Q_WM_LEVEL8 = 8, /**< 8 entry watermark */ - IX_QMGR_Q_WM_LEVEL16 = 16, /**< 16 entry watermark */ - IX_QMGR_Q_WM_LEVEL32 = 32, /**< 32 entry watermark */ - IX_QMGR_Q_WM_LEVEL64 = 64 /**< 64 entry watermark */ -} IxQMgrWMLevel; - -/** - * @ingroup IxQMgrAPI - * - * @enum IxQMgrDispatchGroup - * - * @brief QMgr dispatch group select identifiers. - * - * This enum defines the groups over which the dispatcher will process when - * called. One of the enum values must be used as a input to - * @a ixQMgrDispatcherLoopRunA0, @a ixQMgrDispatcherLoopRunB0 - * or @a ixQMgrDispatcherLoopRunB0LLP. - * - */ -typedef enum -{ - IX_QMGR_QUELOW_GROUP = 0, /**< Queues 0-31 */ - IX_QMGR_QUEUPP_GROUP /**< Queues 32-63 */ -} IxQMgrDispatchGroup; - -/** - * @ingroup IxQMgrAPI - * - * @enum IxQMgrPriority - * - * @brief Dispatcher priority levels. - * - * This enum defines the different queue dispatch priority levels. - * The lowest priority number (0) is the highest priority level. - * - */ -typedef enum -{ - IX_QMGR_Q_PRIORITY_0 = 0, /**< Priority level 0 */ - IX_QMGR_Q_PRIORITY_1, /**< Priority level 1 */ - IX_QMGR_Q_PRIORITY_2, /**< Priority level 2 */ - IX_QMGR_Q_PRIORITY_INVALID /**< Invalid Priority level */ -} IxQMgrPriority; - -/** - * @ingroup IxQMgrAPI - * - * @enum IxQMgrType - * - * @brief Callback types as used with livelock prevention - * - * This enum defines the different callback types. - * These types are only used when Livelock prevention is enabled. - * The default is IX_QMGR_TYPE_REALTIME_OTHER. - * - */ - -typedef enum -{ - IX_QMGR_TYPE_REALTIME_OTHER = 0, /**< Real time callbacks-always allowed run*/ - IX_QMGR_TYPE_REALTIME_PERIODIC, /**< Periodic callbacks-always allowed run */ - IX_QMGR_TYPE_REALTIME_SPORADIC /**< Sporadic callbacks-only run if no - periodic callbacks are in progress */ -} IxQMgrType; - - -/** - * @ingroup IxQMgrAPI - * - * @typedef IxQMgrCallbackId - * - * @brief Uniquely identifies a callback function. - * - * A unique callback identifier associated with each callback - * registered by clients. - * - */ -typedef unsigned IxQMgrCallbackId; - -/** - * @typedef IxQMgrCallback - * - * @brief QMgr notification callback type. - * - * This defines the interface to all client callback functions. - * - * @param qId @ref IxQMgrQId [in] - the queue identifier - * @param cbId @ref IxQMgrCallbackId [in] - the callback identifier - */ -typedef void (*IxQMgrCallback)(IxQMgrQId qId, - IxQMgrCallbackId cbId); - -/** - * @ingroup IxQMgrAPI - * - * @typedef IxQMgrDispatcherFuncPtr - * - * @brief QMgr Dispatcher Loop function pointer. - * - * This defines the interface for QMgr Dispather functions. - * - * @param group @ref IxQMgrDispatchGroup [in] - the group of the - * queue of which the dispatcher will run - */ -typedef void (*IxQMgrDispatcherFuncPtr)(IxQMgrDispatchGroup group); - -/* - * Function Prototypes - */ - -/* ------------------------------------------------------------ - Initialisation related functions - ---------------------------------------------------------- */ - -/** - * - * @ingroup IxQMgrAPI - * - * @fn ixQMgrInit (void) - * - * @brief Initialise the QMgr. - * - * This function must be called before and other QMgr function. It - * sets up internal data structures. - * - * @return @li IX_SUCCESS, the IxQMgr successfully initialised - * @return @li IX_FAIL, failed to initialize the Qmgr - * - */ -PUBLIC IX_STATUS -ixQMgrInit (void); - -/** - * - * @ingroup IxQMgrAPI - * - * @fn ixQMgrUnload (void) - * - * @brief Uninitialise the QMgr. - * - * This function will perform the tasks required to unload the QMgr component - * cleanly. This includes unmapping kernel memory. - * This should be called before a soft reboot or unloading of a kernel module. - * - * @pre It should only be called if @ref ixQMgrInit has already been called. - * - * @post No QMgr functions should be called until ixQMgrInit is called again. - * - * @return @li IX_SUCCESS, the IxQMgr successfully uninitialised - * @return @li IX_FAIL, failed to uninitialize the Qmgr - * - */ -PUBLIC IX_STATUS -ixQMgrUnload (void); - -/** - * - * @ingroup IxQMgrAPI - * - * @fn ixQMgrShow (void) - * - * @brief Describe queue configuration and statistics for active queues. - * - * This function shows active queues, their configurations and statistics. - * - * @return @li void - * - */ -PUBLIC void -ixQMgrShow (void); - -/** - * - * @ingroup IxQMgrAPI - * - * @fn ixQMgrQShow (IxQMgrQId qId) - * - * @brief Display aqueue configuration and statistics for a queue. - * - * This function shows queue configuration and statistics for a queue. - * - * @param qId @ref IxQMgrQId [in] - the queue identifier. - * - * @return @li IX_SUCCESS, success - * @return @li IX_QMGR_Q_NOT_CONFIGURED, queue not configured for this QId - * - */ -PUBLIC IX_STATUS -ixQMgrQShow (IxQMgrQId qId); - - -/* ------------------------------------------------------------ - Configuration related functions - ---------------------------------------------------------- */ - -/** - * - * @ingroup IxQMgrAPI - * - * @fn ixQMgrQConfig (char *qName, - IxQMgrQId qId, - IxQMgrQSizeInWords qSizeInWords, - IxQMgrQEntrySizeInWords qEntrySizeInWords) - * - * @brief Configure an AQM queue. - * - * This function is called by a client to setup a queue. The size and entrySize - * qId and qName(NULL pointer) are checked for valid values. This function must - * be called for each queue, before any queue accesses are made and after - * ixQMgrInit() has been called. qName is assumed to be a '\0' terminated array - * of 16 charachters or less. - * - * @param *qName char [in] - is the name provided by the client and is associated - * with a QId by the QMgr. - * @param qId @ref IxQMgrQId [in] - the qId of this queue - * @param qSizeInWords @ref IxQMgrQSize [in] - the size of the queue can be one of 16,32 - * 64, 128 words. - * @param qEntrySizeInWords @ref IxQMgrQEntrySizeInWords [in] - the size of a queue entry - * can be one of 1,2,4 words. - * - * @return @li IX_SUCCESS, a specified queue has been successfully configured. - * @return @li IX_FAIL, IxQMgr has not been initialised. - * @return @li IX_QMGR_PARAMETER_ERROR, invalid parameter(s). - * @return @li IX_QMGR_INVALID_QSIZE, invalid queue size - * @return @li IX_QMGR_INVALID_Q_ID, invalid queue id - * @return @li IX_QMGR_INVALID_Q_ENTRY_SIZE, invalid queue entry size - * @return @li IX_QMGR_Q_ALREADY_CONFIGURED, queue already configured - * - */ -PUBLIC IX_STATUS -ixQMgrQConfig (char *qName, - IxQMgrQId qId, - IxQMgrQSizeInWords qSizeInWords, - IxQMgrQEntrySizeInWords qEntrySizeInWords); - -/** - * @ingroup IxQMgrAPI - * - * @fn ixQMgrQSizeInEntriesGet (IxQMgrQId qId, - unsigned *qSizeInEntries) - * - * @brief Return the size of a queue in entries. - * - * This function returns the the size of the queue in entriese. - * - * @param qId @ref IxQMgrQId [in] - the queue identifier - * @param *qSizeInEntries @ref IxQMgrQSize [out] - queue size in entries - * - * @return @li IX_SUCCESS, successfully retrieved the number of full entrie - * @return @li IX_QMGR_Q_NOT_CONFIGURED, queue not configured for this QId - * @return @li IX_QMGR_PARAMETER_ERROR, invalid parameter(s). - * - */ -PUBLIC IX_STATUS -ixQMgrQSizeInEntriesGet (IxQMgrQId qId, - unsigned *qSizeInEntries); - -/** - * - * @ingroup IxQMgrAPI - * - * @fn ixQMgrWatermarkSet (IxQMgrQId qId, - IxQMgrWMLevel ne, - IxQMgrWMLevel nf) - * - * @brief Set the Nearly Empty and Nearly Full Watermarks fo a queue. - * - * This function is called by a client to set the watermarks NE and NF for the - * queue specified by qId. - * The queue must be empty at the time this function is called, it is the clients - * responsibility to ensure that the queue is empty. - * This function will read the status of the queue before the watermarks are set - * and again after the watermarks are set. If the status register has changed, - * due to a queue access by an NPE for example, a warning is returned. - * Queues 32-63 only support the NE flag, therefore the value of nf will be ignored - * for these queues. - * - * @param qId @ref IxQMgrQId [in] - the QId of the queue. - * @param ne @ref IxQMgrWMLevel [in] - the NE(Nearly Empty) watermark for this - * queue. Valid values are 0,1,2,4,8,16,32 and - * 64 entries. - * @param nf @ref IxQMgrWMLevel [in] - the NF(Nearly Full) watermark for this queue. - * Valid values are 0,1,2,4,8,16,32 and 64 - * entries. - * - * @return @li IX_SUCCESS, watermarks have been set for the queu - * @return @li IX_QMGR_Q_NOT_CONFIGURED, queue not configured for this QId - * @return @li IX_QMGR_INVALID_Q_WM, invalid watermark - * @return @li IX_QMGR_WARNING, the status register may not be constistent - * - */ -PUBLIC IX_STATUS -ixQMgrWatermarkSet (IxQMgrQId qId, - IxQMgrWMLevel ne, - IxQMgrWMLevel nf); - -/** - * @ingroup IxQMgrAPI - * - * @fn ixQMgrAvailableSramAddressGet (UINT32 *address, - unsigned *sizeOfFreeSram) - * - * @brief Return the address of available AQM SRAM. - * - * This function returns the starting address in AQM SRAM not used by the - * current queue configuration and should only be called after all queues - * have been configured. - * Calling this function before all queues have been configured will will return - * the currently available SRAM. A call to configure another queue will use some - * of the available SRAM. - * The amount of SRAM available is specified in sizeOfFreeSram. The address is the - * address of the bottom of available SRAM. Available SRAM extends from address - * from address to address + sizeOfFreeSram. - * - * @param **address UINT32 [out] - the address of the available SRAM, NULL if - * none available. - * @param *sizeOfFreeSram unsigned [out]- the size in words of available SRAM - * - * @return @li IX_SUCCESS, there is available SRAM and is pointed to by address - * @return @li IX_QMGR_PARAMETER_ERROR, invalid parameter(s) - * @return @li IX_QMGR_NO_AVAILABLE_SRAM, all AQM SRAM is consumed by the queue - * configuration. - * - */ -PUBLIC IX_STATUS -ixQMgrAvailableSramAddressGet (UINT32 *address, - unsigned *sizeOfFreeSram); - - -/* ------------------------------------------------------------ - Queue access related functions - ---------------------------------------------------------- */ - -/** - * - * @ingroup IxQMgrAPI - * - * @fn ixQMgrQReadWithChecks (IxQMgrQId qId, - UINT32 *entry) - * - * @brief Read an entry from a queue. - * - * This function reads an entire entry from a queue returning it in entry. The - * queue configuration word is read to determine what entry size this queue is - * configured for and then the number of words specified by the entry size is - * read. entry must be a pointer to a previously allocated array of sufficient - * size to hold an entry. - * - * @note - IX_QMGR_Q_UNDERFLOW is only returned for queues 0-31 as queues 32-63 - * do not have an underflow status maintained. - * - * @param qId @ref IxQMgrQId [in] - the queue identifier. - * @param *entry UINT32 [out] - pointer to the entry word(s). - * - * @return @li IX_SUCCESS, entry was successfully read. - * @return @li IX_QMGR_PARAMETER_ERROR, invalid paramter(s). - * @return @li IX_QMGR_Q_NOT_CONFIGURED, queue not configured for this QId - * @return @li IX_QMGR_Q_UNDERFLOW, attempt to read from an empty queue - * - */ -PUBLIC IX_STATUS -ixQMgrQReadWithChecks (IxQMgrQId qId, - UINT32 *entry); - - - -/** - * @brief Internal structure to facilitate inlining functions in IxQMgr.h - */ -typedef struct -{ - /* fields related to write functions */ - UINT32 qOflowStatBitMask; /**< overflow status mask */ - UINT32 qWriteCount; /**< queue write count */ - - /* fields related to read and write functions */ - volatile UINT32 *qAccRegAddr; /**< access register */ - volatile UINT32 *qUOStatRegAddr; /**< status register */ - volatile UINT32 *qConfigRegAddr; /**< config register */ - UINT32 qEntrySizeInWords; /**< queue entry size in words */ - UINT32 qSizeInEntries; /**< queue size in entries */ - - /* fields related to read functions */ - UINT32 qUflowStatBitMask; /**< underflow status mask */ - UINT32 qReadCount; /**< queue read count */ -} IxQMgrQInlinedReadWriteInfo; - - -/** - * - * @ingroup IxQMgrAPI - * - * @fn ixQMgrQReadMWordsMinus1 (IxQMgrQId qId, - UINT32 *entry) - * - * @brief This function reads the remaining of the q entry - * for queues configured with many words. - * (the first word of the entry is already read - * in the inlined function and the entry pointer already - * incremented - * - * @param qId @ref IxQMgrQId [in] - the queue identifier. - * @param *entry UINT32 [out] - pointer to the entry word(s). - * - * @return @li IX_SUCCESS, entry was successfully read. - * @return @li IX_QMGR_Q_UNDERFLOW, attempt to read from an empty queue - * - */ -PUBLIC IX_STATUS -ixQMgrQReadMWordsMinus1 (IxQMgrQId qId, - UINT32 *entry); - - - -/** - * - * @ingroup IxQMgrAPI - * - * @fn ixQMgrQRead (IxQMgrQId qId, - UINT32 *entry) - * - * @brief Fast read of an entry from a queue. - * - * This function is a heavily streamlined version of ixQMgrQReadWithChecks(), - * but performs essentially the same task. It reads an entire entry from a - * queue, returning it in entry which must be a pointer to a previously - * allocated array of sufficient size to hold an entry. - * - * @note - This function is inlined, to reduce unnecessary function call - * overhead. It does not perform any parameter checks, or update any statistics. - * Also, it does not check that the queue specified by qId has been configured. - * or is in range. It simply reads an entry from the queue, and checks for - * underflow. - * - * @note - IX_QMGR_Q_UNDERFLOW is only returned for queues 0-31 as queues 32-63 - * do not have an underflow status maintained. - * - * @param qId @ref IxQMgrQId [in] - the queue identifier. - * @param *entry UINT32 [out] - pointer to the entry word(s). - * - * @return @li IX_SUCCESS, entry was successfully read. - * @return @li IX_QMGR_Q_UNDERFLOW, attempt to read from an empty queue - * - */ -#ifdef NO_INLINE_APIS -PUBLIC IX_STATUS -ixQMgrQRead (IxQMgrQId qId, - UINT32 *entryPtr); -#else -extern IxQMgrQInlinedReadWriteInfo ixQMgrQInlinedReadWriteInfo[]; -extern IX_STATUS ixQMgrQReadMWordsMinus1 (IxQMgrQId qId, UINT32 *entryPtr); - -IX_QMGR_INLINE PUBLIC IX_STATUS -ixQMgrQRead (IxQMgrQId qId, - UINT32 *entryPtr); -#endif - -IX_QMGR_INLINE PUBLIC IX_STATUS -ixQMgrQRead (IxQMgrQId qId, - UINT32 *entryPtr) -#ifdef NO_INLINE_APIS - ; -#else -{ - IxQMgrQInlinedReadWriteInfo *infoPtr = &ixQMgrQInlinedReadWriteInfo[qId]; - UINT32 entry, entrySize; - - /* get a new entry */ - entrySize = infoPtr->qEntrySizeInWords; - entry = IX_QMGR_INLINE_READ_LONG(infoPtr->qAccRegAddr); - - if (entrySize != IX_QMGR_Q_ENTRY_SIZE1) - { - *entryPtr = entry; - /* process the remaining part of the entry */ - return ixQMgrQReadMWordsMinus1(qId, entryPtr); - } - - /* underflow is available for lower queues only */ - if (qId < IX_QMGR_MIN_QUEUPP_QID) - { - /* the counter of queue entries is decremented. In happy - * day scenario there are many entries in the queue - * and the counter does not reach zero. - */ - if (infoPtr->qReadCount-- == 0) - { - /* There is maybe no entry in the queue - * qReadCount is now negative, but will be corrected before - * the function returns. - */ - UINT32 qPtrs; /* queue internal pointers */ - - /* when a queue is empty, the hw guarantees to return - * a null value. If the value is not null, the queue is - * not empty. - */ - if (entry == 0) - { - /* get the queue status */ - UINT32 status = IX_QMGR_INLINE_READ_LONG(infoPtr->qUOStatRegAddr); - - /* check the underflow status */ - if (status & infoPtr->qUflowStatBitMask) - { - /* the queue is empty - * clear the underflow status bit if it was set - */ - IX_QMGR_INLINE_WRITE_LONG(infoPtr->qUOStatRegAddr, - status & ~infoPtr->qUflowStatBitMask); - *entryPtr = 0; - infoPtr->qReadCount = 0; - return IX_QMGR_Q_UNDERFLOW; - } - } - /* store the result */ - *entryPtr = entry; - - /* No underflow occured : someone is filling the queue - * or the queue contains null entries. - * The current counter needs to be - * updated from the current number of entries in the queue - */ - - /* get snapshot of queue pointers */ - qPtrs = IX_QMGR_INLINE_READ_LONG(infoPtr->qConfigRegAddr); - - /* Mod subtraction of pointers to get number of words in Q. */ - qPtrs = (qPtrs - (qPtrs >> 7)) & 0x7f; - - if (qPtrs == 0) - { - /* no entry in the queue */ - infoPtr->qReadCount = 0; - } - else - { - /* convert the number of words inside the queue - * to a number of entries - */ - infoPtr->qReadCount = qPtrs & (infoPtr->qSizeInEntries - 1); - } - return IX_SUCCESS; - } - } - *entryPtr = entry; - return IX_SUCCESS; -} -#endif - -/** - * - * @ingroup IxQMgrAPI - * - * @fn ixQMgrQBurstRead (IxQMgrQId qId, - UINT32 numEntries, - UINT32 *entries) - * - * @brief Read a number of entries from an AQM queue. - * - * This function will burst read a number of entries from the specified queue. - * The entry size of queue is auto-detected. The function will attempt to - * read as many entries as specified by the numEntries parameter and will - * return an UNDERFLOW if any one of the individual entry reads fail. - * - * @warning - * IX_QMGR_Q_UNDERFLOW is only returned for queues 0-31 as queues 32-63 - * do not have an underflow status maintained, hence there is a potential for - * silent failure here. This function must be used with caution. - * - * @note - * This function is intended for fast draining of queues, so to make it - * as efficient as possible, it has the following features: - * - This function is inlined, to reduce unnecessary function call overhead. - * - It does not perform any parameter checks, or update any statistics. - * - It does not check that the queue specified by qId has been configured. - * - It does not check that the queue has the number of full entries that - * have been specified to be read. It will read until it finds a NULL entry or - * until the number of specified entries have been read. It always checks for - * underflow after all the reads have been performed. - * Therefore, the client should ensure before calling this function that there - * are enough entries in the queue to read. ixQMgrQNumEntriesGet() will - * provide the number of full entries in a queue. - * ixQMgrQRead() or ixQMgrQReadWithChecks(), which only reads - * a single queue entry per call, should be used instead if the user requires - * checks for UNDERFLOW after each entry read. - * - * @param qId @ref IxQMgrQId [in] - the queue identifier. - * @param numEntries unsigned [in] - the number of entries to read. - * This number should be greater than 0 - * @param *entries UINT32 [out] - the word(s) read. - * - * @return @li IX_SUCCESS, entries were successfully read. - * @return @li IX_QMGR_Q_UNDERFLOW, attempt to read from an empty queue - * - */ -#ifdef NO_INLINE_APIS -PUBLIC IX_STATUS -ixQMgrQBurstRead (IxQMgrQId qId, - UINT32 numEntries, - UINT32 *entries); -#else -IX_QMGR_INLINE PUBLIC IX_STATUS -ixQMgrQBurstRead (IxQMgrQId qId, - UINT32 numEntries, - UINT32 *entries); -#endif /* endif NO_INLINE_APIS */ - -IX_QMGR_INLINE PUBLIC IX_STATUS -ixQMgrQBurstRead (IxQMgrQId qId, - UINT32 numEntries, - UINT32 *entries) -#ifdef NO_INLINE_APIS -; -#else -{ - IxQMgrQInlinedReadWriteInfo *infoPtr = &ixQMgrQInlinedReadWriteInfo[qId]; - UINT32 nullCheckEntry; - - if (infoPtr->qEntrySizeInWords == IX_QMGR_Q_ENTRY_SIZE1) - { - volatile UINT32 *qAccRegAddr = infoPtr->qAccRegAddr; - - /* the code is optimized to take care of data dependencies: - * Durig a read, there are a few cycles needed to get the - * read complete. During these cycles, it is poossible to - * do some CPU, e.g. increment pointers and decrement - * counters. - */ - - /* fetch a queue entry */ - nullCheckEntry = IX_QMGR_INLINE_READ_LONG(infoPtr->qAccRegAddr); - - /* iterate the specified number of queue entries */ - while (--numEntries) - { - /* check the result of the previous read */ - if (nullCheckEntry == 0) - { - /* if we read a NULL entry, stop. We have underflowed */ - break; - } - else - { - /* write the entry */ - *entries = nullCheckEntry; - /* fetch next entry */ - nullCheckEntry = IX_QMGR_INLINE_READ_LONG(qAccRegAddr); - /* increment the write address */ - entries++; - } - } - /* write the pre-fetched entry */ - *entries = nullCheckEntry; - } - else - { - IxQMgrQEntrySizeInWords entrySizeInWords = infoPtr->qEntrySizeInWords; - /* read the specified number of queue entries */ - nullCheckEntry = 0; - while (numEntries--) - { - UINT32 i; - - for (i = 0; i < (UINT32)entrySizeInWords; i++) - { - *entries = IX_QMGR_INLINE_READ_LONG(infoPtr->qAccRegAddr + i); - nullCheckEntry |= *entries++; - } - - /* if we read a NULL entry, stop. We have underflowed */ - if (nullCheckEntry == 0) - { - break; - } - nullCheckEntry = 0; - } - } - - /* reset the current read count : next access to the read function - * will force a underflow status check - */ - infoPtr->qReadCount = 0; - - /* Check if underflow occurred on the read */ - if (nullCheckEntry == 0 && qId < IX_QMGR_MIN_QUEUPP_QID) - { - /* get the queue status */ - UINT32 status = IX_QMGR_INLINE_READ_LONG(infoPtr->qUOStatRegAddr); - - if (status & infoPtr->qUflowStatBitMask) - { - /* clear the underflow status bit if it was set */ - IX_QMGR_INLINE_WRITE_LONG(infoPtr->qUOStatRegAddr, - status & ~infoPtr->qUflowStatBitMask); - return IX_QMGR_Q_UNDERFLOW; - } - } - - return IX_SUCCESS; -} -#endif - -/** - * @ingroup IxQMgrAPI - * - * @fn ixQMgrQPeek (IxQMgrQId qId, - unsigned int entryIndex, - UINT32 *entry) - * - * @brief Read an entry from a queue without moving the read pointer. - * - * This function inspects an entry in a queue. The entry is inspected directly - * in AQM SRAM and is not read from queue access registers. The entry is NOT removed - * from the queue and the read/write pointers are unchanged. - * N.B: The queue should not be accessed when this function is called. - * - * @param qId @ref IxQMgrQId [in] - the queue identifier. - * @param entryIndex unsigned int [in] - index of entry in queue in the range - * [0].......[current number of entries in queue]. - * @param *entry UINT32 [out] - pointer to the entry word(s). - * - * @return @li IX_SUCCESS, entry was successfully inspected. - * @return @li IX_QMGR_PARAMETER_ERROR, invalid paramter(s). - * @return @li IX_QMGR_Q_NOT_CONFIGURED, queue not configured for this QId. - * @return @li IX_QMGR_ENTRY_INDEX_OUT_OF_BOUNDS, an entry does not exist at - * specified index. - * @return @li IX_FAIL, failed to inpected the queue entry. - */ -PUBLIC IX_STATUS -ixQMgrQPeek (IxQMgrQId qId, - unsigned int entryIndex, - UINT32 *entry); - -/** - * - * @ingroup IxQMgrAPI - * - * @fn ixQMgrQWriteWithChecks (IxQMgrQId qId, - UINT32 *entry) - * - * @brief Write an entry to an AQM queue. - * - * This function will write the entry size number of words pointed to by entry to - * the queue specified by qId. The queue configuration word is read to - * determine the entry size of queue and the corresponding number of words is - * then written to the queue. - * - * @note - IX_QMGR_Q_OVERFLOW is only returned for queues 0-31 as queues 32-63 - * do not have an overflow status maintained. - * - * @param qId @ref IxQMgrQId [in] - the queue identifier. - * @param *entry UINT32 [in] - the word(s) to write. - * - * @return @li IX_SUCCESS, value was successfully written. - * @return @li IX_QMGR_PARAMETER_ERROR, invalid paramter(s). - * @return @li IX_QMGR_Q_NOT_CONFIGURED, queue not configured for this QId - * @return @li IX_QMGR_Q_OVERFLOW, attempt to write to a full queue - * - */ -PUBLIC IX_STATUS -ixQMgrQWriteWithChecks (IxQMgrQId qId, - UINT32 *entry); - -/** - * - * @ingroup IxQMgrAPI - * - * @fn ixQMgrQWrite (IxQMgrQId qId, - UINT32 *entry) - * - * @brief Fast write of an entry to a queue. - * - * This function is a heavily streamlined version of ixQMgrQWriteWithChecks(), - * but performs essentially the same task. It will write the entry size number - * of words pointed to by entry to the queue specified by qId. - * - * @note - This function is inlined, to reduce unnecessary function call - * overhead. It does not perform any parameter checks, or update any - * statistics. Also, it does not check that the queue specified by qId has - * been configured. It simply writes an entry to the queue, and checks for - * overflow. - * - * @note - IX_QMGR_Q_OVERFLOW is only returned for queues 0-31 as queues 32-63 - * do not have an overflow status maintained. - * - * @param qId @ref IxQMgrQId [in] - the queue identifier. - * @param *entry UINT32 [in] - pointer to the entry word(s). - * - * @return @li IX_SUCCESS, entry was successfully read. - * @return @li IX_QMGR_Q_OVERFLOW, attempt to write to a full queue - * - */ -#ifdef NO_INLINE_APIS -PUBLIC IX_STATUS -ixQMgrQWrite (IxQMgrQId qId, - UINT32 *entry); -#else -IX_QMGR_INLINE PUBLIC IX_STATUS -ixQMgrQWrite (IxQMgrQId qId, - UINT32 *entry); -#endif /* NO_INLINE_APIS */ - -IX_QMGR_INLINE PUBLIC IX_STATUS -ixQMgrQWrite (IxQMgrQId qId, - UINT32 *entry) -#ifdef NO_INLINE_APIS - ; -#else -{ - IxQMgrQInlinedReadWriteInfo *infoPtr = &ixQMgrQInlinedReadWriteInfo[qId]; - UINT32 entrySize; - - /* write the entry */ - IX_QMGR_INLINE_WRITE_LONG(infoPtr->qAccRegAddr, *entry); - entrySize = infoPtr->qEntrySizeInWords; - - if (entrySize != IX_QMGR_Q_ENTRY_SIZE1) - { - /* process the remaining part of the entry */ - volatile UINT32 *qAccRegAddr = infoPtr->qAccRegAddr; - while (--entrySize) - { - ++entry; - IX_QMGR_INLINE_WRITE_LONG(++qAccRegAddr, *entry); - } - entrySize = infoPtr->qEntrySizeInWords; - } - - /* overflow is available for lower queues only */ - if (qId < IX_QMGR_MIN_QUEUPP_QID) - { - UINT32 qSize = infoPtr->qSizeInEntries; - /* increment the current number of entries in the queue - * and check for overflow - */ - if (infoPtr->qWriteCount++ == qSize) - { - /* the queue may have overflow */ - UINT32 qPtrs; /* queue internal pointers */ - - /* get the queue status */ - UINT32 status = IX_QMGR_INLINE_READ_LONG(infoPtr->qUOStatRegAddr); - - /* read the status twice because the status may - * not be immediately ready after the write operation - */ - if ((status & infoPtr->qOflowStatBitMask) || - ((status = IX_QMGR_INLINE_READ_LONG(infoPtr->qUOStatRegAddr)) - & infoPtr->qOflowStatBitMask)) - { - /* the queue is full, clear the overflow status - * bit if it was set - */ - IX_QMGR_INLINE_WRITE_LONG(infoPtr->qUOStatRegAddr, - status & ~infoPtr->qOflowStatBitMask); - infoPtr->qWriteCount = infoPtr->qSizeInEntries; - return IX_QMGR_Q_OVERFLOW; - } - /* No overflow occured : someone is draining the queue - * and the current counter needs to be - * updated from the current number of entries in the queue - */ - - /* get q pointer snapshot */ - qPtrs = IX_QMGR_INLINE_READ_LONG(infoPtr->qConfigRegAddr); - - /* Mod subtraction of pointers to get number of words in Q. */ - qPtrs = (qPtrs - (qPtrs >> 7)) & 0x7f; - - if (qPtrs == 0) - { - /* the queue may be full at the time of the - * snapshot. Next access will check - * the overflow status again. - */ - infoPtr->qWriteCount = qSize; - } - else - { - /* convert the number of words to a number of entries */ - if (entrySize == IX_QMGR_Q_ENTRY_SIZE1) - { - infoPtr->qWriteCount = qPtrs & (qSize - 1); - } - else - { - infoPtr->qWriteCount = (qPtrs / entrySize) & (qSize - 1); - } - } - } - } - return IX_SUCCESS; -} -#endif - -/** - * - * @ingroup IxQMgrAPI - * - * @fn ixQMgrQBurstWrite (IxQMgrQId qId, - unsigned numEntries, - UINT32 *entries) - * - * @brief Write a number of entries to an AQM queue. - * - * This function will burst write a number of entries to the specified queue. - * The entry size of queue is auto-detected. The function will attempt to - * write as many entries as specified by the numEntries parameter and will - * return an OVERFLOW if any one of the individual entry writes fail. - * - * @warning - * IX_QMGR_Q_OVERFLOW is only returned for queues 0-31 as queues 32-63 - * do not have an overflow status maintained, hence there is a potential for - * silent failure here. This function must be used with caution. - * - * @note - * This function is intended for fast population of queues, so to make it - * as efficient as possible, it has the following features: - * - This function is inlined, to reduce unnecessary function call overhead. - * - It does not perform any parameter checks, or update any statistics. - * - It does not check that the queue specified by qId has been configured. - * - It does not check that the queue has enough free space to hold the entries - * before writing, and only checks for overflow after all writes have been - * performed. Therefore, the client should ensure before calling this function - * that there is enough free space in the queue to hold the number of entries - * to be written. ixQMgrQWrite() or ixQMgrQWriteWithChecks(), which only writes - * a single queue entry per call, should be used instead if the user requires - * checks for OVERFLOW after each entry written. - * - * @param qId @ref IxQMgrQId [in] - the queue identifier. - * @param numEntries unsigned [in] - the number of entries to write. - * @param *entries UINT32 [in] - the word(s) to write. - * - * @return @li IX_SUCCESS, value was successfully written. - * @return @li IX_QMGR_Q_OVERFLOW, attempt to write to a full queue - * - */ -#ifdef NO_INLINE_APIS -PUBLIC IX_STATUS -ixQMgrQBurstWrite (IxQMgrQId qId, - unsigned numEntries, - UINT32 *entries); -#else -IX_QMGR_INLINE PUBLIC IX_STATUS -ixQMgrQBurstWrite (IxQMgrQId qId, - unsigned numEntries, - UINT32 *entries); -#endif /* NO_INLINE_APIS */ - -IX_QMGR_INLINE PUBLIC IX_STATUS -ixQMgrQBurstWrite (IxQMgrQId qId, - unsigned numEntries, - UINT32 *entries) -#ifdef NO_INLINE_APIS -; -#else -{ - IxQMgrQInlinedReadWriteInfo *infoPtr = &ixQMgrQInlinedReadWriteInfo[qId]; - UINT32 status; - - /* update the current write count */ - infoPtr->qWriteCount += numEntries; - - if (infoPtr->qEntrySizeInWords == IX_QMGR_Q_ENTRY_SIZE1) - { - volatile UINT32 *qAccRegAddr = infoPtr->qAccRegAddr; - while (numEntries--) - { - IX_QMGR_INLINE_WRITE_LONG(qAccRegAddr, *entries); - entries++; - } - } - else - { - IxQMgrQEntrySizeInWords entrySizeInWords = infoPtr->qEntrySizeInWords; - UINT32 i; - - /* write each queue entry */ - while (numEntries--) - { - /* write the queueEntrySize number of words for each entry */ - for (i = 0; i < (UINT32)entrySizeInWords; i++) - { - IX_QMGR_INLINE_WRITE_LONG((infoPtr->qAccRegAddr + i), *entries); - entries++; - } - } - } - - /* check if the write count overflows */ - if (infoPtr->qWriteCount > infoPtr->qSizeInEntries) - { - /* reset the current write count */ - infoPtr->qWriteCount = infoPtr->qSizeInEntries; - } - - /* Check if overflow occurred on the write operation */ - if (qId < IX_QMGR_MIN_QUEUPP_QID) - { - /* get the queue status */ - status = IX_QMGR_INLINE_READ_LONG(infoPtr->qUOStatRegAddr); - - /* read the status twice because the status may - * not be ready at the time of the write - */ - if ((status & infoPtr->qOflowStatBitMask) || - ((status = IX_QMGR_INLINE_READ_LONG(infoPtr->qUOStatRegAddr)) - & infoPtr->qOflowStatBitMask)) - { - /* clear the underflow status bit if it was set */ - IX_QMGR_INLINE_WRITE_LONG(infoPtr->qUOStatRegAddr, - status & ~infoPtr->qOflowStatBitMask); - return IX_QMGR_Q_OVERFLOW; - } - } - - return IX_SUCCESS; -} -#endif - -/** - * @ingroup IxQMgrAPI - * - * @fn ixQMgrQPoke (IxQMgrQId qId, - unsigned int entryIndex, - UINT32 *entry) - * - * @brief Write an entry to a queue without moving the write pointer. - * - * This function modifies an entry in a queue. The entry is modified directly - * in AQM SRAM and not using the queue access registers. The entry is NOT added to the - * queue and the read/write pointers are unchanged. - * N.B: The queue should not be accessed when this function is called. - * - * @param qId @ref IxQMgrQId [in] - the queue identifier. - * @param entryIndex unsigned int [in] - index of entry in queue in the range - * [0].......[current number of entries in queue]. - * @param *entry UINT32 [in] - pointer to the entry word(s). - * - * @return @li IX_SUCCESS, entry was successfully modified. - * @return @li IX_QMGR_PARAMETER_ERROR, invalid paramter(s). - * @return @li IX_QMGR_Q_NOT_CONFIGURED, queue not configured for this QId. - * @return @li IX_QMGR_ENTRY_INDEX_OUT_OF_BOUNDS, an entry does not exist at - * specified index. - * @return @li IX_FAIL, failed to modify the queue entry. - */ -PUBLIC IX_STATUS -ixQMgrQPoke (IxQMgrQId qId, - unsigned int entryIndex, - UINT32 *entry); - -/** - * - * @ingroup IxQMgrAPI - * - * @fn ixQMgrQNumEntriesGet (IxQMgrQId qId, - unsigned *numEntries) - * - * @brief Get a snapshot of the number of entries in a queue. - * - * This function gets the number of entries in a queue. - * - * @param qId @ref IxQMgrQId [in] qId - the queue idenfifier - * @param *numEntries unsigned [out] - the number of entries in a queue - * - * @return @li IX_SUCCESS, got the number of entries for the queue - * @return @li IX_QMGR_PARAMETER_ERROR, invalid paramter(s). - * @return @li IX_QMGR_Q_NOT_CONFIGURED, the specified qId has not been configured - * @return @li IX_QMGR_WARNING, could not determine num entries at this time - * - */ -PUBLIC IX_STATUS -ixQMgrQNumEntriesGet (IxQMgrQId qId, - unsigned *numEntries); - -/** - * - * @ingroup IxQMgrAPI - * - * @fn ixQMgrQStatusGetWithChecks (IxQMgrQId qId, - IxQMgrQStatus *qStatus) - * - * @brief Get a queues status. - * - * This function reads the specified queues status. A queues status is defined - * by its status flags. For queues 0-31 these flags are E,NE,NF,F. For - * queues 32-63 these flags are NE and F. - * - * @param qId @ref IxQMgrQId [in] - the queue identifier. - * @param &qStatus @ref IxQMgrQStatus [out] - the status of the specified queue. - * - * @return @li IX_SUCCESS, queue status was successfully read. - * @return @li IX_QMGR_Q_NOT_CONFIGURED, the specified qId has not been configured - * @return @li IX_QMGR_PARAMETER_ERROR, invalid paramter. - * - */ -PUBLIC IX_STATUS -ixQMgrQStatusGetWithChecks (IxQMgrQId qId, - IxQMgrQStatus *qStatus); - -/** - * - * @ingroup IxQMgrAPI - * - * @fn ixQMgrQStatusGet (IxQMgrQId qId, - IxQMgrQStatus *qStatus) - * - * @brief Fast get of a queue's status. - * - * This function is a streamlined version of ixQMgrQStatusGetWithChecks(), but - * performs essentially the same task. It reads the specified queue's status. - * A queues status is defined by its status flags. For queues 0-31 these flags - * are E,NE,NF,F. For queues 32-63 these flags are NE and F. - * - * @note - This function is inlined, to reduce unnecessary function call - * overhead. It does not perform any parameter checks, or update any - * statistics. Also, it does not check that the queue specified by qId has - * been configured. It simply reads the specified queue's status. - * - * @param qId @ref IxQMgrQId [in] - the queue identifier. - * @param *qStatus @ref IxQMgrQStatus [out] - the status of the specified queue. - * - * @return @li void. - * - */ - -#ifdef NO_INLINE_APIS -PUBLIC IX_STATUS -ixQMgrQStatusGet (IxQMgrQId qId, - IxQMgrQStatus *qStatus); -#else -extern UINT32 ixQMgrAqmIfQueLowStatRegAddr[]; -extern UINT32 ixQMgrAqmIfQueLowStatBitsOffset[]; -extern UINT32 ixQMgrAqmIfQueLowStatBitsMask; -extern UINT32 ixQMgrAqmIfQueUppStat0RegAddr; -extern UINT32 ixQMgrAqmIfQueUppStat1RegAddr; -extern UINT32 ixQMgrAqmIfQueUppStat0BitMask[]; -extern UINT32 ixQMgrAqmIfQueUppStat1BitMask[]; - -IX_QMGR_INLINE PUBLIC IX_STATUS -ixQMgrQStatusGet (IxQMgrQId qId, - IxQMgrQStatus *qStatus); -#endif /* endif NO_INLINE_APIS */ - -IX_QMGR_INLINE PUBLIC IX_STATUS -ixQMgrQStatusGet (IxQMgrQId qId, - IxQMgrQStatus *qStatus) -#ifdef NO_INLINE_APIS - ; -#else -{ - /* read the status of a queue in the range 0-31 */ - if (qId < IX_QMGR_MIN_QUEUPP_QID) - { - volatile UINT32 *lowStatRegAddr = (UINT32*)ixQMgrAqmIfQueLowStatRegAddr[qId]; - - UINT32 lowStatBitsOffset = ixQMgrAqmIfQueLowStatBitsOffset[qId]; - UINT32 lowStatBitsMask = ixQMgrAqmIfQueLowStatBitsMask; - - /* read the status register for this queue */ - *qStatus = IX_QMGR_INLINE_READ_LONG(lowStatRegAddr); - - /* mask out the status bits relevant only to this queue */ - *qStatus = (*qStatus >> lowStatBitsOffset) & lowStatBitsMask; - - } - else /* read status of a queue in the range 32-63 */ - { - - volatile UINT32 *qNearEmptyStatRegAddr = (UINT32*)ixQMgrAqmIfQueUppStat0RegAddr; - volatile UINT32 *qFullStatRegAddr = (UINT32*)ixQMgrAqmIfQueUppStat1RegAddr; - int maskIndex = qId - IX_QMGR_MIN_QUEUPP_QID; - UINT32 qNearEmptyStatBitMask = ixQMgrAqmIfQueUppStat0BitMask[maskIndex]; - UINT32 qFullStatBitMask = ixQMgrAqmIfQueUppStat1BitMask[maskIndex]; - - /* Reset the status bits */ - *qStatus = 0; - - /* Check if the queue is nearly empty */ - if (IX_QMGR_INLINE_READ_LONG(qNearEmptyStatRegAddr) & qNearEmptyStatBitMask) - { - *qStatus |= IX_QMGR_Q_STATUS_NE_BIT_MASK; - } - - /* Check if the queue is full */ - if (IX_QMGR_INLINE_READ_LONG(qFullStatRegAddr) & qFullStatBitMask) - { - *qStatus |= IX_QMGR_Q_STATUS_F_BIT_MASK; - } - } - return IX_SUCCESS; -} -#endif - -/* ------------------------------------------------------------ - Queue dispatch related functions - ---------------------------------------------------------- */ - -/** - * - * @ingroup IxQMgrAPI - * - * @fn ixQMgrDispatcherPrioritySet (IxQMgrQId qId, - IxQMgrPriority priority) - * - * @brief Set the dispatch priority of a queue. - * - * This function is called to set the dispatch priority of queue. The effect of - * this function is to add a priority change request to a queue. This queue is - * serviced by @a ixQMgrDispatcherLoopRunA0, @a ixQMgrDispatcherLoopRunB0 or - * @a ixQMgrDispatcherLoopRunB0LLP. - * - * This function is re-entrant. and can be used from an interrupt context - * - * @param qId @ref IxQMgrQId [in] - the queue identifier - * @param priority @ref IxQMgrPriority [in] - the new queue dispatch priority - * - * @return @li IX_SUCCESS, priority change request is queued - * @return @li IX_QMGR_Q_NOT_CONFIGURED, the specified qId has not been configured - * @return @li IX_QMGR_Q_INVALID_PRIORITY, specified priority is invalid - * - */ -PUBLIC IX_STATUS -ixQMgrDispatcherPrioritySet (IxQMgrQId qId, - IxQMgrPriority priority); -/** - * - * @ingroup IxQMgrAPI - * - * @fn ixQMgrNotificationEnable (IxQMgrQId qId, - IxQMgrSourceId sourceId) - * - * @brief Enable notification on a queue for a specified queue source flag. - * - * This function is called by a client of the QMgr to enable notifications on a - * specified condition. - * If the condition for the notification is set after the client has called this - * function but before the function has enabled the interrupt source, then the - * notification will not occur. - * For queues 32-63 the notification source is fixed to the NE(Nearly Empty) flag - * and cannot be changed so the sourceId parameter is ignored for these queues. - * The status register is read before the notofication is enabled and is read again - * after the notification has been enabled, if they differ then the warning status - * is returned. - * - * This function is re-entrant. and can be used from an interrupt context - * - * @param qId @ref IxQMgrQId [in] - the queue identifier - * @param sourceId @ref IxQMgrSourceId [in] - the interrupt src condition identifier - * - * @return @li IX_SUCCESS, the interrupt has been enabled for the specified source - * @return @li IX_QMGR_Q_NOT_CONFIGURED, the specified qId has not been configured - * @return @li IX_QMGR_INVALID_INT_SOURCE_ID, interrupt source invalid for this queue - * @return @li IX_QMGR_WARNING, the status register may not be constistent - * - */ -PUBLIC IX_STATUS -ixQMgrNotificationEnable (IxQMgrQId qId, - IxQMgrSourceId sourceId); - -/** - * @ingroup IxQMgrAPI - * - * @fn ixQMgrNotificationDisable (IxQMgrQId qId) - * - * @brief Disable notifications on a queue. - * - * This function is called to disable notifications on a specified queue. - * - * This function is re-entrant. and can be used from an interrupt context - * - * @param qId @ref IxQMgrQId [in] - the queue identifier - * - * @return @li IX_SUCCESS, the interrupt has been disabled - * @return @li IX_QMGR_Q_NOT_CONFIGURED, the specified qId has not been configured - * - */ -PUBLIC IX_STATUS -ixQMgrNotificationDisable (IxQMgrQId qId); - -/** - * - * @ingroup IxQMgrAPI - * - * @fn ixQMgrDispatcherLoopRunA0 (IxQMgrDispatchGroup group) - * - * @brief Run the callback dispatcher. - * - * This function runs the dispatcher for a group of queues. - * Callbacks are made for interrupts that have occurred on queues within - * the group that have registered callbacks. The order in which queues are - * serviced depends on the queue priorities set by the client. - * This function may be called from interrupt or task context. - * For optimisations that were introduced in IXP42X B0 and supported IXP46X - * the @a ixQMgrDispatcherLoopRunB0, or @a ixQMgrDispatcherLoopRunB0LLP - * should be used. - * - * This function is not re-entrant. - * - * @param group @ref IxQMgrDispatchGroup [in] - the group of queues over which the - * dispatcher will run - * - * @return @li void - * - * @note This function may be called from interrupt or task context. - * However, for optimal performance the choice of context depends also on the - * operating system used. - * - */ -PUBLIC void -ixQMgrDispatcherLoopRunA0 (IxQMgrDispatchGroup group); - -/** - * - * @ingroup IxQMgrAPI - * - * @fn ixQMgrDispatcherLoopRunB0 (IxQMgrDispatchGroup group) - * - * @brief Run the callback dispatcher. - * - * The enhanced version of @a ixQMgrDispatcherLoopRunA0 that is optimised for - * features introduced in IXP42X B0 silicon and supported on IXP46X. - * This is the default dispatcher for IXP42X B0 and IXP46X silicon. - * The function runs the dispatcher for a group of queues. - * Callbacks are made for interrupts that have occurred on queues within - * the group that have registered callbacks. The order in which queues are - * serviced depends on the queue priorities set by the client. - * This function may be called from interrupt or task context. - * - * This function is not re-entrant. - * - * @param group @ref IxQMgrDispatchGroup [in] - the group of queues over which the - * dispatcher will run - * - * @return @li void - * - * - * @note This function may be called from interrupt or task context. - * However, for optimal performance the choice of context depends also on the - * operating system used. - * - */ -PUBLIC void -ixQMgrDispatcherLoopRunB0 (IxQMgrDispatchGroup group); - -/** - * - * @ingroup IxQMgrAPI - * - * @fn ixQMgrDispatcherLoopRunB0LLP (IxQMgrDispatchGroup group) - * - * @brief Run the callback dispatcher. - * - * This is a version of the optimised dispatcher for IXP42X B0 and IXP46X, - * @a ixQMgrDispatcherLoopRunB0, with added support for livelock prevention. - * This dispatcher will only be used for the IXP42X B0 or IXP46X silicon if - * feature control indicates that IX_FEATURECTRL_ORIGB0_DISPATCHER is set to - * IX_FEATURE_CTRL_SWCONFIG_DISABLED. Otherwise the @a ixQMgrDispatcherLoopRunB0 - * dispatcher will be used (Default). - * - * When this dispatcher notifies for a queue that is type - * IX_QMGR_TYPE_REALTIME_PERIODIC, notifications for queues that are set - * as type IX_QMGR_REALTIME_SPORADIC are not processed and disabled. - * This helps prevent any tasks resulting from the notification of the - * IX_QMGR_TYPE_REALTIME_PERIODIC type queue to being subject to livelock. - * The function runs the dispatcher for a group of queues. - * Callbacks are made for interrupts that have occurred on queues within - * the group that have registered callbacks. The order in which queues are - * serviced depends on their type along with the queue priorities set by the - * client. This function may be called from interrupt or task context. - * - * This function is not re-entrant. - * - * @param group @ref IxQMgrDispatchGroup [in] - the group of queues over which - * the dispatcher will run - * - * @return @li void - * - * @note This function may be called from interrupt or task context. - * However, for optimal performance the choice of context depends also on the - * operating system used. - * - */ -PUBLIC void -ixQMgrDispatcherLoopRunB0LLP (IxQMgrDispatchGroup group); - -/** - * - * @ingroup IxQMgrAPI - * - * @fn ixQMgrNotificationCallbackSet (IxQMgrQId qId, - IxQMgrCallback callback, - IxQMgrCallbackId callbackId) - * - * @brief Set the notification callback for a queue. - * - * This function sets the callback for the specified queue. This callback will - * be called by the dispatcher, and may be called in the context of a interrupt - * If callback has a value of NULL the previously registered callback, if one - * exists will be unregistered. - * - * @param qId @ref IxQMgrQId [in] - the queue idenfifier - * @param callback @ref IxQMgrCallback [in] - the callback registered for this queue - * @param callbackId @ref IxQMgrCallbackId [in] - the callback identifier - * - * @return @li IX_SUCCESS, the callback for the specified queue has been set - * @return @li IX_QMGR_Q_NOT_CONFIGURED, the specified qId has not been configured - * - */ -PUBLIC IX_STATUS -ixQMgrNotificationCallbackSet (IxQMgrQId qId, - IxQMgrCallback callback, - IxQMgrCallbackId callbackId); - -/** - * - * @ingroup IxQMgrAPI - * - * @fn ixQMgrDispatcherLoopGet (IxQMgrDispatcherFuncPtr *qDispatcherFuncPtr) - * - * @brief Get QMgr DispatcherLoopRun for respective silicon device - * - * This function gets a function pointer to ixQMgrDispatcherLoopRunA0() for IXP42X A0 - * Silicon. If the IXP42X B0 or 46X Silicon, the default is the ixQMgrDispatcherLoopRunB0() - * function, however if live lock prevention is enabled a function pointer to - * ixQMgrDispatcherLoopRunB0LLP() is given. - * - * @param *qDispatchFuncPtr @ref IxQMgrDispatcherFuncPtr [out] - - * the function pointer of QMgr Dispatcher - * - */ -PUBLIC void -ixQMgrDispatcherLoopGet (IxQMgrDispatcherFuncPtr *qDispatcherFuncPtr); - -/** - * - * @ingroup IxQMgrAPI - * - * @fn ixQMgrStickyInterruptRegEnable(void) - * - * @brief Enable AQM's sticky interrupt register behaviour only available - * on B0 Silicon. - * - * When AQM's sticky interrupt register is enabled, interrupt register bit will - * only be cleared when a '1' is written to interrupt register bit and the - * interrupting condition is satisfied, i.e.queue condition does not exist. - * - * @note This function must be called before any queue is enabled. - * Calling this function after queue is enabled will cause - * undefined results. - * - * @return none - * - */ -PUBLIC void -ixQMgrStickyInterruptRegEnable(void); - - -/** - * @ingroup IxQMgrAPI - * - * @fn ixQMgrCallbackTypeSet(IxQMgrQId qId, - IxQMgrType type) - * - * @brief Set the Callback Type of a queue. - * - * This function is only used for live lock prevention. - * This function allows the callback type of a queue to be set. The default for - * all queues is IX_QMGR_TYPE_REALTIME_OTHER. Setting the type to - * IX_QMGR_TYPE_REALTIME_SPORADIC means that this queue will have it's - * notifications disabled while there is a task associated with a - * queue of type IX_QMGR_TYPE_REALTIME_PERIODIC running. As live lock - * prevention operates on lower queues, this function should - * be called for lower queues only. - * This function is not re-entrant. - * - * @param qId @ref IxQMgrQId [in] - the queue identifier - * @param type @ref IxQMgrType [in] - the type of callback - * - * @return @li IX_SUCCESS, successfully set callback type for the queue entry - * @return @li IX_QMGR_Q_NOT_CONFIGURED, queue not configured for this QId - * @return @li IX_QMGR_PARAMETER_ERROR, invalid parameter(s). - * - */ -PUBLIC IX_STATUS -ixQMgrCallbackTypeSet(IxQMgrQId qId, - IxQMgrType type); - -/** - * @ingroup IxQMgrAPI - * - * @fn ixQMgrCallbackTypeGet(IxQMgrQId qId, - IxQMgrType *type) - * - * @brief Get the Callback Type of a queue. - * - * This function allows the callback type of a queue to be got. As live lock - * prevention operates on lower queues, this function should - * be called for lower queues only. - * This function is re-entrant. - * - * @param qId @ref IxQMgrQId [in] - the queue identifier - * @param *type @ref IxQMgrType [out] - the type of callback - * - * @return @li IX_SUCCESS, successfully set callback type for the queue entry - * @return @li IX_QMGR_Q_NOT_CONFIGURED, queue not configured for this QId - * @return @li IX_QMGR_PARAMETER_ERROR, invalid parameter(s) - * - */ -PUBLIC IX_STATUS -ixQMgrCallbackTypeGet(IxQMgrQId qId, - IxQMgrType *type); - -/** - * @ingroup IxQMgrAPI - * - * @fn ixQMgrPeriodicDone(void) - * - * @brief Indicate that the Periodic task is completed for LLP - * - * This function is used as part of live lock prevention. - * A periodic task is a task that results from a queue that - * is set as type IX_QMGR_TYPE_REALTIME_PERIODIC. This function - * should be called to indicate to the dispatcher that the - * the periodic task is completed. This ensures that the notifications - * for queues set as type sporadic queues are re-enabled. - * This function is re-entrant. - * - */ -PUBLIC void -ixQMgrPeriodicDone(void); - - -/** - * @ingroup IxQMgrAPI - * - * @fn ixQMgrLLPShow(int resetStats) - * - * @brief Print out the live lock prevention statistics when in debug mode. - * - * This function prints out statistics related to the livelock. These - * statistics are only collected in debug mode. - * This function is not re-entrant. - * - * @param resetStats @ref int [in] - if set the the stats are reset. - * - */ -PUBLIC void -ixQMgrLLPShow(int resetStats); - - -#endif /* IXQMGR_H */ - -/** - * @} defgroup IxQMgrAPI - */ - - |
