diff options
Diffstat (limited to 'drivers/net/npe/include/IxNpeDlNpeMgr_p.h')
| -rw-r--r-- | drivers/net/npe/include/IxNpeDlNpeMgr_p.h | 236 |
1 files changed, 0 insertions, 236 deletions
diff --git a/drivers/net/npe/include/IxNpeDlNpeMgr_p.h b/drivers/net/npe/include/IxNpeDlNpeMgr_p.h deleted file mode 100644 index 989db2c57e..0000000000 --- a/drivers/net/npe/include/IxNpeDlNpeMgr_p.h +++ /dev/null @@ -1,236 +0,0 @@ -/** - * @file IxNpeDlNpeMgr_p.h - * - * @author Intel Corporation - * @date 14 December 2001 - * @brief This file contains the private API for the NpeMgr module. - * - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- -*/ - - -/** - * @defgroup IxNpeDlNpeMgr_p IxNpeDlNpeMgr_p - * - * @brief The private API for the IxNpeDl NpeMgr module - * - * @{ - */ - -#ifndef IXNPEDLNPEMGR_P_H -#define IXNPEDLNPEMGR_P_H - - -/* - * Put the user defined include files required. - */ -#include "IxNpeDl.h" -#include "IxOsalTypes.h" - - -/* - * Function Prototypes - */ - - -/** - * @fn void ixNpeDlNpeMgrInit (void) - * - * @brief Initialises the NpeMgr module - * - * @param none - * - * This function initialises the NpeMgr module. - * It should be called before any other function in this module is called. - * It only needs to be called once, but can be called multiple times safely. - * The code will ASSERT on failure. - * - * @pre - * - It must be called before any other function in this module - * - * @post - * - NPE Configuration Register memory space will be mapped using - * IxOsal. This memory will not be unmapped by this module. - * - * @return none - */ -void -ixNpeDlNpeMgrInit (void); - - -/** - * @fn IX_STATUS ixNpeMhNpeMgrUninit (void) - * - * @brief This function will uninitialise the IxNpeDlNpeMgr sub-component. - * - * This function will uninitialise the IxNpeDlNpeMgr sub-component. - * It should only be called once, and only if the IxNpeDlNpeMgr sub-component - * has already been initialised by calling @ref ixNpeDlNpeMgrInit(). - * No other IxNpeDlNpeMgr sub-component API functions should be called - * until @ref ixNpeDlNpeMgrInit() is called again. - * If possible, this function should be called before a soft reboot or unloading - * a kernel module to perform any clean up operations required for IxNpeMh. - * - * @return - * - IX_SUCCESS if the operation was successful - * - IX_FAIL otherwise - */ - -IX_STATUS ixNpeDlNpeMgrUninit (void); - - -/** - * @fn IX_STATUS ixNpeDlNpeMgrImageLoad (IxNpeDlNpeId npeId, - UINT32 *imageCodePtr, - BOOL verify) - * - * @brief Loads a image of microcode onto an NPE - * - * @param IxNpeDlNpeId [in] npeId - Id of target NPE - * @param UINT32* [in] imageCodePtr - pointer to image code in image to be - * downloaded - * @param BOOL [in] verify - if true, verify each word written to - * NPE memory. - * - * This function loads a image containing blocks of microcode onto a - * particular NPE. If the <i>verify</i> option is ON, NpeDl will read back each - * word written and verify that it was written successfully - * - * @pre - * - The NPE should be stopped beforehand - * - * @post - * - The NPE Instruction Pipeline may be flushed clean - * - * @return - * - IX_SUCCESS if the download was successful - * - IX_FAIL if the download failed - * - IX_NPEDL_CRITICAL_NPE_ERR if the download failed due to timeout error - * where NPE is not responding - */ -IX_STATUS -ixNpeDlNpeMgrImageLoad (IxNpeDlNpeId npeId, UINT32 *imageCodePtr, - BOOL verify); - - -/** - * @fn IX_STATUS ixNpeDlNpeMgrNpeReset (IxNpeDlNpeId npeId) - * - * @brief sets a NPE to RESET state - * - * @param IxNpeDlNpeId [in] npeId - id of target NPE - * - * This function performs a soft NPE reset by writing reset values to the - * Configuration Bus Execution Control registers, the Execution Context Stack - * registers, the Physical Register file, and the Context Store registers for - * each context number. It also clears inFIFO, outFIFO and Watchpoint FIFO. - * It does not reset NPE Co-processors. - * - * @pre - * - The NPE should be stopped beforehand - * - * @post - * - NPE NextProgram Counter (NextPC) will be set to a fixed initial value, - * such as 0. This should be explicitly set by downloading State - * Information before starting NPE Execution. - * - The NPE Instruction Pipeline will be in a clean state. - * - * @return - * - IX_SUCCESS if the operation was successful - * - IX_FAIL if the operation failed - * - IX_NPEDL_CRITICAL_NPE_ERR if the operation failed due to NPE hang - */ -IX_STATUS -ixNpeDlNpeMgrNpeReset (IxNpeDlNpeId npeId); - - -/** - * @fn IX_STATUS ixNpeDlNpeMgrNpeStart (IxNpeDlNpeId npeId) - * - * @brief Starts NPE Execution - * - * @param IxNpeDlNpeId [in] npeId - Id of target NPE - * - * Ensures only background Execution Stack Level is Active, clears instruction - * pipeline, and starts Execution on a NPE by sending a Start NPE command to - * the NPE. Checks the execution status of the NPE to verify that it is - * running. - * - * @pre - * - The NPE should be stopped beforehand. - * - Note that this function does not set the NPE Next Program Counter - * (NextPC), so it should be set beforehand if required by downloading - * appropriate State Information. - * - * @post - * - * @return - * - IX_SUCCESS if the operation was successful - * - IX_FAIL otherwise - */ -IX_STATUS -ixNpeDlNpeMgrNpeStart (IxNpeDlNpeId npeId); - - -/** - * @fn IX_STATUS ixNpeDlNpeMgrNpeStop (IxNpeDlNpeId npeId) - * - * @brief Halts NPE Execution - * - * @param IxNpeDlNpeId [in] npeId - id of target NPE - * - * Stops execution on an NPE by sending a Stop NPE command to the NPE. - * Checks the execution status of the NPE to verify that it has stopped. - * - * @pre - * - * @post - * - * @return - * - IX_SUCCESS if the operation was successful - * - IX_FAIL otherwise - */ -IX_STATUS -ixNpeDlNpeMgrNpeStop (IxNpeDlNpeId npeId); - - -/** - * @fn void ixNpeDlNpeMgrStatsShow (void) - * - * @brief This function will display statistics of the IxNpeDl NpeMgr module - * - * @return none - */ -void -ixNpeDlNpeMgrStatsShow (void); - - -/** - * @fn void ixNpeDlNpeMgrStatsReset (void) - * - * @brief This function will reset the statistics of the IxNpeDl NpeMgr module - * - * @return none - */ -void -ixNpeDlNpeMgrStatsReset (void); - - -#endif /* IXNPEDLIMAGEMGR_P_H */ - -/** - * @} defgroup IxNpeDlNpeMgr_p - */ |
