diff options
Diffstat (limited to 'drivers/net/npe/include/IxFeatureCtrl.h')
| -rw-r--r-- | drivers/net/npe/include/IxFeatureCtrl.h | 718 |
1 files changed, 0 insertions, 718 deletions
diff --git a/drivers/net/npe/include/IxFeatureCtrl.h b/drivers/net/npe/include/IxFeatureCtrl.h deleted file mode 100644 index 987b00b562..0000000000 --- a/drivers/net/npe/include/IxFeatureCtrl.h +++ /dev/null @@ -1,718 +0,0 @@ -/** - * @file IxFeatureCtrl.h - * - * @date 30-Jan-2003 - - * @brief This file contains the public API of the IXP400 Feature Control - * component. - * - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- -*/ -/* ------------------------------------------------------ - Doxygen group definitions - ------------------------------------------------------ */ -/** - * @defgroup IxFeatureCtrlAPI IXP400 Feature Control (IxFeatureCtrl) API - * - * @brief The Public API for the IXP400 Feature Control. - * - * @{ - */ - -#ifndef IXFEATURECTRL_H -#define IXFEATURECTRL_H - -/* - * User defined include files - */ -#include "IxOsal.h" - -/* - * #defines and macros - */ - -/************************************************************* - * The following are IxFeatureCtrlComponentCheck return values. - ************************************************************/ - -/** - * @ingroup IxFeatureCtrlAPI - * - * @def IX_FEATURE_CTRL_COMPONENT_DISABLED - * - * @brief Hardware Component is disabled/unavailable. - * Return status by ixFeatureCtrlComponentCheck() - */ -#define IX_FEATURE_CTRL_COMPONENT_DISABLED 0 - -/** - * @ingroup IxFeatureCtrlAPI - * - * @def IX_FEATURE_CTRL_COMPONENT_ENABLED - * - * @brief Hardware Component is available. - * Return status by ixFeatureCtrlComponentCheck() - */ -#define IX_FEATURE_CTRL_COMPONENT_ENABLED 1 - -/*********************************************************************************** - * Product ID in XScale CP15 - Register 0 - * - It contains information on the maximum XScale Core Frequency and - * Silicon Stepping. - * - XScale Core Frequency Id indicates only the maximum XScale frequency - * achievable and not the running XScale frequency (maybe stepped down). - * - The register is read by using ixFeatureCtrlProductIdRead. - * - Usage example: - * productId = ixFeatureCtrlProductIdRead(); - * if( (productId & IX_FEATURE_CTRL_SILICON_STEPPING_MASK) == - * IX_FEATURE_CTRL_SILICON_TYPE_A0 ) - * if( (productId & IX_FEATURE_CTRL_XSCALE_FREQ_MASK) == - * IX_FEATURE_CTRL_XSCALE_FREQ_533 ) - * - * 31 28 27 24 23 20 19 16 15 12 11 9 8 4 3 0 - * -------------------------------------------------------------------------------- - * | 0x6 | 0x9 | 0x0 | 0x5 | 0x4 | Device ID | XScale Core Freq Id | Si Stepping Id | - * -------------------------------------------------------------------------------- - * - * Maximum Achievable XScale Core Frequency Id : 533MHz - 0x1C - * 400MHz - 0x1D - * 266MHz - 0x1F - * - * <b>THE CORE FREQUENCY ID IS NOT APPLICABLE TO IXP46X <\b> - * - * The above is applicable to IXP42X only. CP15 in IXP46X does not contain any - * Frequency ID. - * - * Si Stepping Id : A - 0x0 - * B - 0x1 - * - * XScale Core freq Id - Device ID [11:9] : IXP42X - 0x0 - * IXP46X - 0x1 - *************************************************************************************/ - -/** - * @ingroup IxFeatureCtrlAPI - * - * @def IX_FEATURE_CTRL_SILICON_TYPE_A0 - * - * @brief This is the value of A0 Silicon in product ID. - */ -#define IX_FEATURE_CTRL_SILICON_TYPE_A0 0 - -/** - * @ingroup IxFeatureCtrlAPI - * - * @def IX_FEATURE_CTRL_SILICON_TYPE_B0 - * - * @brief This is the value of B0 Silicon in product ID. - */ -#define IX_FEATURE_CTRL_SILICON_TYPE_B0 1 - -/** - * @ingroup IxFeatureCtrlAPI - * - * @def IX_FEATURE_CTRL_SILICON_STEPPING_MASK - * - * @brief This is the mask of silicon stepping in product ID. - */ -#define IX_FEATURE_CTRL_SILICON_STEPPING_MASK 0xF - -/** - * @ingroup IxFeatureCtrlAPI - * - * @def IX_FEATURE_CTRL_DEVICE_TYPE_MASK - * - * @brief This is the mask of silicon stepping in product ID. - */ -#define IX_FEATURE_CTRL_DEVICE_TYPE_MASK (0x7) - -/** - * @ingroup IxFeatureCtrlAPI - * - * @def IX_FEATURE_CTRL_DEVICE_TYPE_OFFSET - * - * @brief This is the mask of silicon stepping in product ID. - */ -#define IX_FEATURE_CTRL_DEVICE_TYPE_OFFSET 9 - - -/** - * @ingroup IxFeatureCtrlAPI - * - * @def IX_FEATURE_CTRL_XSCALE_FREQ_533 - * - * @brief This is the value of 533MHz XScale Core in product ID. - */ -#define IX_FEATURE_CTRL_XSCALE_FREQ_533 ((0x1C)<<4) - -/** - * @ingroup IxFeatureCtrlAPI - * - * @def IX_FEATURE_CTRL_XSCALE_FREQ_400 - * - * @brief This is the value of 400MHz XScale Core in product ID. - */ -#define IX_FEATURE_CTRL_XSCALE_FREQ_400 ((0x1D)<<4) - -/** - * @ingroup IxFeatureCtrlAPI - * - * @def IX_FEATURE_CTRL_XSCALE_FREQ_266 - * - * @brief This is the value of 266MHz XScale Core in product ID. - */ -#define IX_FEATURE_CTRL_XSCALE_FREQ_266 ((0x1F)<<4) - -/** - * @ingroup IxFeatureCtrlAPI - * - * @def IX_FEATURE_CTRL_XSCALE_FREQ_MASK - * - * @brief This is the mask of XScale Core in product ID. - */ -#define IX_FEATURE_CTRL_XSCALE_FREQ_MASK ((0xFF)<<4) - -/** - * @ingroup IxFeatureCtrlAPI - * - * @def IX_FEATURECTRL_REG_UTOPIA_32PHY - * - * @brief Maximum UTOPIA PHY available is 32. - * - */ -#define IX_FEATURECTRL_REG_UTOPIA_32PHY 0x0 - -/** - * @ingroup IxFeatureCtrlAPI - * - * @def IX_FEATURECTRL_REG_UTOPIA_16PHY - * - * @brief Maximum UTOPIA PHY available is 16. - * - */ -#define IX_FEATURECTRL_REG_UTOPIA_16PHY 0x1 - -/** - * @ingroup IxFeatureCtrlAPI - * - * @def IX_FEATURECTRL_REG_UTOPIA_8PHY - * - * @brief Maximum UTOPIA PHY available to is 8. - * - */ -#define IX_FEATURECTRL_REG_UTOPIA_8PHY 0x2 - -/** - * @ingroup IxFeatureCtrlAPI - * - * @def IX_FEATURECTRL_REG_UTOPIA_4PHY - * - * @brief Maximum UTOPIA PHY available to is 4. - * - */ -#define IX_FEATURECTRL_REG_UTOPIA_4PHY 0x3 - -#ifdef __ixp46X - -/** - * @ingroup IxFeatureCtrlAPI - * - * @def IX_FEATURECTRL_REG_XSCALE_533FREQ - * - * @brief Maximum frequency available to IXP46x is 533 MHz. - * - */ -#define IX_FEATURECTRL_REG_XSCALE_533FREQ 0x0 - -/** - * @ingroup IxFeatureCtrlAPI - * - * @def IX_FEATURECTRL_REG_XSCALE_667FREQ - * - * @brief Maximum frequency available to IXP46x is 667 MHz. - * - */ -#define IX_FEATURECTRL_REG_XSCALE_667FREQ 0x1 - -/** - * @ingroup IxFeatureCtrlAPI - * - * @def IX_FEATURECTRL_REG_XSCALE_400FREQ - * - * @brief Maximum frequency available to IXP46x is 400 MHz. - * - */ -#define IX_FEATURECTRL_REG_XSCALE_400FREQ 0x2 - -/** - * @ingroup IxFeatureCtrlAPI - * - * @def IX_FEATURECTRL_REG_XSCALE_266FREQ - * - * @brief Maximum frequency available to IXP46x is 266 MHz. - * - */ -#define IX_FEATURECTRL_REG_XSCALE_266FREQ 0x3 - -#endif /* __ixp46X */ - -/** - * @ingroup IxFeatureCtrlAPI - * - * @def IX_FEATURECTRL_COMPONENT_NOT_AVAILABLE - * - * @brief Component selected is not available for device - * - */ -#define IX_FEATURECTRL_COMPONENT_NOT_AVAILABLE 0x0000 - -/** - * @ingroup IxFeatureCtrlAPI - * - * @def IX_FEATURECTRL_COMPONENT_ALWAYS_AVAILABLE - * - * @brief Component selected is not available for device - * - */ -#define IX_FEATURECTRL_COMPONENT_ALWAYS_AVAILABLE 0xffff - -/** - * @defgroup IxFeatureCtrlSwConfig Software Configuration for Access Component - * - * @ingroup IxFeatureCtrlAPI - * - * @brief This section describes software configuration in access component. The - * configuration can be changed at run-time. ixFeatureCtrlSwConfigurationCheck( ) - * will be used across applicable access component to check the configuration. - * ixFeatureCtrlSwConfigurationWrite( ) is used to write the software configuration. - * - * @note <b>All software configurations are default to be enabled.</b> - * - * @{ - */ -/** - * @ingroup IxFeatureCtrlSwConfig - * - * @def IX_FEATURE_CTRL_SWCONFIG_DISABLED - * - * @brief Software configuration is disabled. - * - */ -#define IX_FEATURE_CTRL_SWCONFIG_DISABLED 0 - -/** - * @ingroup IxFeatureCtrlSwConfig - * - * @def IX_FEATURE_CTRL_SWCONFIG_ENABLED - * - * @brief Software configuration is enabled. - * - */ -#define IX_FEATURE_CTRL_SWCONFIG_ENABLED 1 - -/** - * Section for enums - **/ - -/** - * @ingroup IxFeatureCtrlBuildDevice - * - * @enum IxFeatureCtrlBuildDevice - * - * @brief Indicates software build type. - * - * Default build type is IXP42X - * - */ -typedef enum -{ - IX_FEATURE_CTRL_SW_BUILD_IXP42X = 0, /**<Build type is IXP42X */ - IX_FEATURE_CTRL_SW_BUILD_IXP46X /**<Build type is IXP46X */ -} IxFeatureCtrlBuildDevice; - -/** - * @ingroup IxFeatureCtrlSwConfig - * - * @enum IxFeatureCtrlSwConfig - * - * @brief Enumeration for software configuration in access components. - * - * Entry for new run-time software configuration should be added here. - */ -typedef enum -{ - IX_FEATURECTRL_ETH_LEARNING = 0, /**< EthDB Learning Feature */ - IX_FEATURECTRL_ORIGB0_DISPATCHER, /**< IXP42X B0 and IXP46X dispatcher without - livelock prevention functionality Feature */ - IX_FEATURECTRL_SWCONFIG_MAX /**< Maximum boudary for IxFeatureCtrlSwConfig */ -} IxFeatureCtrlSwConfig; - - -/************************************************************************ - * IXP400 Feature Control Register - * - It contains the information (available/unavailable) of IXP425&IXP46X - * hardware components in their corresponding bit location. - * - Bit value of 0 means the hardware component is available - * or not software disabled. Hardware component that is available - * can be software disabled. - * - Bit value of 1 means the hardware is unavailable or software - * disabled.Hardware component that is unavailable cannot be software - * enabled. - * - Use ixFeatureCtrlHwCapabilityRead() to read the hardware component's - * availability. - * - Use ixFeatureCtrlRead() to get the current IXP425/IXP46X feature control - * register value. - * - * Bit Field Description (Hardware Component Availability) - * --- --------------------------------------------------- - * 0 RComp Circuitry - * 1 USB Controller - * 2 Hashing Coprocessor - * 3 AES Coprocessor - * 4 DES Coprocessor - * 5 HDLC Coprocessor - * 6 AAL Coprocessor - Always available in IXP46X - * 7 HSS Coprocesspr - * 8 Utopia Coprocessor - * 9 Ethernet 0 Coprocessor - * 10 Ethernet 1 Coprocessor - * 11 NPE A - * 12 NPE B - * 13 NPE C - * 14 PCI Controller - * 15 ECC/TimeSync Coprocessor - Only applicable to IXP46X - * 16-17 Utopia PHY Limit Status : 0x0 - 32 PHY - * 0x1 - 16 PHY - * 0x2 - 8 PHY - * 0x3 - 4 PHY - * - * Portions below are only applicable to IXP46X - * 18 USB Host Coprocessor - * 19 NPE A Ethernet - 0 for Enable if Utopia = 1 - * 20 NPE B Ethernet coprocessor 1-3. - * 21 RSA Crypto Block coprocessor. - * 22-23 Processor frequency : 0x0 - 533 MHz - * 0x1 - 667 MHz - * 0x2 - 400 MHz - * 0x3 - 266 MHz - * 24-31 Reserved - * - ************************************************************************/ -/*Section generic to both IXP42X and IXP46X*/ - -/** - * @ingroup IxFeatureCtrlAPI - * - * @enum IxFeatureCtrlComponentType - * - * @brief Enumeration for components availavble - * - */ -typedef enum -{ - IX_FEATURECTRL_RCOMP = 0, /**<bit location for RComp Circuitry*/ - IX_FEATURECTRL_USB, /**<bit location for USB Controller*/ - IX_FEATURECTRL_HASH, /**<bit location for Hashing Coprocessor*/ - IX_FEATURECTRL_AES, /**<bit location for AES Coprocessor*/ - IX_FEATURECTRL_DES, /**<bit location for DES Coprocessor*/ - IX_FEATURECTRL_HDLC, /**<bit location for HDLC Coprocessor*/ - IX_FEATURECTRL_AAL, /**<bit location for AAL Coprocessor*/ - IX_FEATURECTRL_HSS, /**<bit location for HSS Coprocessor*/ - IX_FEATURECTRL_UTOPIA, /**<bit location for UTOPIA Coprocessor*/ - IX_FEATURECTRL_ETH0, /**<bit location for Ethernet 0 Coprocessor*/ - IX_FEATURECTRL_ETH1, /**<bit location for Ethernet 1 Coprocessor*/ - IX_FEATURECTRL_NPEA, /**<bit location for NPE A*/ - IX_FEATURECTRL_NPEB, /**<bit location for NPE B*/ - IX_FEATURECTRL_NPEC, /**<bit location for NPE C*/ - IX_FEATURECTRL_PCI, /**<bit location for PCI Controller*/ - IX_FEATURECTRL_ECC_TIMESYNC, /**<bit location for TimeSync Coprocessor*/ - IX_FEATURECTRL_UTOPIA_PHY_LIMIT, /**<bit location for Utopia PHY Limit Status*/ - IX_FEATURECTRL_UTOPIA_PHY_LIMIT_BIT2, /**<2nd bit of PHY limit status*/ - IX_FEATURECTRL_USB_HOST_CONTROLLER, /**<bit location for USB host controller*/ - IX_FEATURECTRL_NPEA_ETH, /**<bit location for NPE-A Ethernet Disable*/ - IX_FEATURECTRL_NPEB_ETH, /**<bit location for NPE-B Ethernet 1-3 Coprocessors Disable*/ - IX_FEATURECTRL_RSA, /**<bit location for RSA Crypto block Coprocessors Disable*/ - IX_FEATURECTRL_XSCALE_MAX_FREQ, /**<bit location for XScale max frequency*/ - IX_FEATURECTRL_XSCALE_MAX_FREQ_BIT2, /**<2nd xscale max freq bit NOT TO BE USED */ - IX_FEATURECTRL_MAX_COMPONENTS -} IxFeatureCtrlComponentType; - -/** - * @ingroup IxFeatureCtrlDeviceId - * - * @enum IxFeatureCtrlDeviceId - * - * @brief Enumeration for device type. - * - * @warning This enum is closely related to the npe image. Its format should comply - * with formats used in the npe image ImageID. This is indicated by the - * first nibble of the image ID. This should also be in sync with the - * with what is defined in CP15. Current available formats are - * - IXP42X - 0000 - * - IXP46X - 0001 - * - */ -typedef enum -{ - IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X = 0, /**<Device type is IXP42X */ - IX_FEATURE_CTRL_DEVICE_TYPE_IXP46X, /**<Device type is IXP46X */ - IX_FEATURE_CTRL_DEVICE_TYPE_MAX /**<Max devices */ -} IxFeatureCtrlDeviceId; - - -/** - * @} addtogroup IxFeatureCtrlSwConfig - */ - -/* - * Typedefs - */ - -/** - * @ingroup IxFeatureCtrlAPI - * - * @typedef IxFeatureCtrlReg - * - * @brief Feature Control Register that contains hardware components' - * availability information. - */ -typedef UINT32 IxFeatureCtrlReg; - -/** - * @ingroup IxFeatureCtrlAPI - * - * @typedef IxFeatureCtrlProductId - * - * @brief Product ID of Silicon that contains Silicon Stepping and - * Maximum XScale Core Frequency information. - */ -typedef UINT32 IxFeatureCtrlProductId; - -/* - * Prototypes for interface functions - */ - -/** - * @ingroup IxFeatureCtrlAPI - * - * @fn IxFeatureCtrlReg ixFeatureCtrlRead (void) - * - * @brief This function reads out the CURRENT value of Feature Control Register. - * The current value may not be the same as that of the hardware component - * availability. - * - * The bit location of each hardware component is defined above. - * A value of '1' in bit means the hardware component is not available. A value of '0' - * means the hardware component is available. - * - * @return - * - IxFeatureCtrlReg - the current value of IXP400 Feature Control Register - */ -PUBLIC IxFeatureCtrlReg -ixFeatureCtrlRead (void); - -/** - * @ingroup IxFeatureCtrlAPI - * - * @fn IxFeatureDeviceId ixFeatureCtrlDeviceRead (void) - * - * @brief This function gets the type of device that the software is currently running - * on - * - * This function reads the feature Ctrl register specifically to obtain the device id. - * The definitions of the avilable IDs are as above. - * - * @return - * - IxFeatureCtrlDeviceId - the type of device currently running - */ -IxFeatureCtrlDeviceId -ixFeatureCtrlDeviceRead (void); - -/** - * @ingroup IxFeatureCtrlAPI - * - * @fn IxFeatureCtrlBuildDevice ixFeatureCtrlSoftwareBuildGet (void) - * - * @brief This function refers to the value set by the compiler flag to determine - * the type of device the software is built for. - * - * The function reads the compiler flag to determine the device the software is - * built for. When the user executes build in the command line, - * a compile time flag (__ixp42X/__ixp46X is set. This API reads this - * flag and returns the software build type to the calling client. - * - * @return - * - IxFeatureCtrlBuildDevice - the type of device software is built for. - */ -IxFeatureCtrlBuildDevice -ixFeatureCtrlSoftwareBuildGet (void); - -/** - * @ingroup IxFeatureCtrlAPI - * - * @fn IxFeatureCtrlReg ixFeatureCtrlHwCapabilityRead (void) - * - * @brief This function reads out the hardware capability of a silicon type as defined in - * feature control register.This value is different from that returned by - * ixFeatureCtrlRead() because this function returns the actual hardware component - * availability. - * - * The bit location of each hardware component is defined above. - * A value of '1' in bit means the hardware component is not available. A value of '0' - * means the hardware component is available. - * - * @return - * - IxFeatureCtrlReg - the hardware capability of IXP400. - * - * @warning - * - This function must not be called when IXP400 is running as the result - * is undefined. - */ -PUBLIC IxFeatureCtrlReg -ixFeatureCtrlHwCapabilityRead (void); - -/** - * @ingroup IxFeatureCtrlAPI - * - * @fn void ixFeatureCtrlWrite (IxFeatureCtrlReg expUnitReg) - * - * @brief This function write the value stored in IxFeatureCtrlReg expUnitReg - * to the Feature Control Register. - * - * The bit location of each hardware component is defined above. - * The write is only effective on available hardware components. Writing '1' in a - * bit will software disable the respective hardware component. A '0' will mean that - * the hardware component will remain to be operable. - * - * @param expUnitReg @ref IxFeatureCtrlReg [in] - The value to be written to feature control - * register. - * - * @return none - * - */ -PUBLIC void -ixFeatureCtrlWrite (IxFeatureCtrlReg expUnitReg); - -/** - * @ingroup IxFeatureCtrlAPI - * - * @fn IX_STATUS ixFeatureCtrlComponentCheck (IxFeatureCtrlComponentType componentType) - * - * @brief This function will check the availability of hardware component specified - * as componentType value. - * - * Usage Example:<br> - * - if(IX_FEATURE_CTRL_COMPONENT_DISABLED != - * ixFeatureCtrlComponentCheck(IX_FEATURECTRL_ETH0)) <br> - * - if(IX_FEATURE_CTRL_COMPONENT_ENABLED == - * ixFeatureCtrlComponentCheck(IX_FEATURECTRL_PCI)) <br> - * - * This function is typically called during component initialization time. - * - * @param componentType @ref IxFeatureCtrlComponentType [in] - the type of a component as - * defined above as IX_FEATURECTRL_XXX (Exp: IX_FEATURECTRL_PCI, IX_FEATURECTRL_ETH0) - - * - * @return - * - IX_FEATURE_CTRL_COMPONENT_ENABLED if component is available - * - IX_FEATURE_CTRL_COMPONENT_DISABLED if component is unavailable - */ -PUBLIC IX_STATUS -ixFeatureCtrlComponentCheck (IxFeatureCtrlComponentType componentType); - -/** - * @ingroup IxFeatureCtrlAPI - * - * @fn IxFeatureCtrlProductId ixFeatureCtrlProductIdRead (void) - * - * @brief This function will return IXP400 product ID i.e. CP15, - * Register 0. - * - * @return - * - IxFeatureCtrlProductId - the value of product ID. - * - */ -PUBLIC IxFeatureCtrlProductId -ixFeatureCtrlProductIdRead (void) ; - -/** - * @ingroup IxFeatureCtrlAPI - * - * @fn IX_STATUS ixFeatureCtrlSwConfigurationCheck (IxFeatureCtrlSwConfig swConfigType) - * - * @brief This function checks whether the specified software configuration is - * enabled or disabled. - * - * Usage Example:<br> - * - if(IX_FEATURE_CTRL_SWCONFIG_DISABLED != - * ixFeatureCtrlSwConfigurationCheck(IX_FEATURECTRL_ETH_LEARNING)) <br> - * - if(IX_FEATURE_CTRL_SWCONFIG_ENABLED == - * ixFeatureCtrlSwConfigurationCheck(IX_FEATURECTRL_ETH_LEARNING)) <br> - * - * This function is typically called during access component initialization time. - * - * @param swConfigType @ref IxFeatureCtrlSwConfig [in] - the type of a software configuration - * defined in IxFeatureCtrlSwConfig enumeration. - * - * @return - * - IX_FEATURE_CTRL_SWCONFIG_ENABLED if software configuration is enabled. - * - IX_FEATURE_CTRL_SWCONFIG_DISABLED if software configuration is disabled. - */ -PUBLIC IX_STATUS -ixFeatureCtrlSwConfigurationCheck (IxFeatureCtrlSwConfig swConfigType); - -/** - * @ingroup IxFeatureCtrlAPI - * - * @fn void ixFeatureCtrlSwConfigurationWrite (IxFeatureCtrlSwConfig swConfigType, BOOL enabled) - * - * @brief This function enable/disable the specified software configuration. - * - * Usage Example:<br> - * - ixFeatureCtrlSwConfigurationWrite(IX_FEATURECTRL_ETH_LEARNING, true) is used - * to enable Ethernet Learning Feature <br> - * - ixFeatureCtrlSwConfigurationWrite(IX_FEATURECTRL_ETH_LEARNING, false) is used - * to disable Ethernet Learning Feature <br> - * - * @param swConfigType IxFeatureCtrlSwConfig [in] - the type of a software configuration - * defined in IxFeatureCtrlSwConfig enumeration. - * @param enabled BOOL [in] - To enable(true) / disable (false) the specified software - * configuration. - * - * @return none - * - */ -PUBLIC void -ixFeatureCtrlSwConfigurationWrite (IxFeatureCtrlSwConfig swConfigType, BOOL enabled); - -/** - * @ingroup IxFeatureCtrlAPI - * - * @fn void ixFeatureCtrlIxp400SwVersionShow (void) - * - * @brief This function shows the current software release information for IXP400 - * - * @return none - * - */ -PUBLIC void -ixFeatureCtrlIxp400SwVersionShow (void); - -#endif /* IXFEATURECTRL_H */ - -/** - * @} defgroup IxFeatureCtrlAPI - */ |
