diff options
Diffstat (limited to 'drivers/net/designware.c')
| -rw-r--r-- | drivers/net/designware.c | 130 |
1 files changed, 59 insertions, 71 deletions
diff --git a/drivers/net/designware.c b/drivers/net/designware.c index 9b17db41f6..bf21a08bdf 100644 --- a/drivers/net/designware.c +++ b/drivers/net/designware.c @@ -28,6 +28,7 @@ #include <common.h> #include <miiphy.h> #include <malloc.h> +#include <linux/compiler.h> #include <linux/err.h> #include <asm/io.h> #include "designware.h" @@ -153,6 +154,13 @@ static int dw_eth_init(struct eth_device *dev, bd_t *bis) if (priv->phy_configured != 1) configure_phy(dev); + /* Print link status only once */ + if (!priv->link_printed) { + printf("ENET Speed is %d Mbps - %s duplex connection\n", + priv->speed, (priv->duplex == HALF) ? "HALF" : "FULL"); + priv->link_printed = 1; + } + /* Reset ethernet hardware */ if (mac_reset(dev) < 0) return -1; @@ -163,15 +171,22 @@ static int dw_eth_init(struct eth_device *dev, bd_t *bis) writel(FIXEDBURST | PRIORXTX_41 | BURST_16, &dma_p->busmode); - writel(FLUSHTXFIFO | readl(&dma_p->opmode), &dma_p->opmode); - writel(STOREFORWARD | TXSECONDFRAME, &dma_p->opmode); + writel(readl(&dma_p->opmode) | FLUSHTXFIFO | STOREFORWARD | + TXSECONDFRAME, &dma_p->opmode); conf = FRAMEBURSTENABLE | DISABLERXOWN; - if (priv->speed != SPEED_1000M) + if (priv->speed != 1000) conf |= MII_PORTSELECT; - if (priv->duplex == FULL_DUPLEX) + if ((priv->interface != PHY_INTERFACE_MODE_MII) && + (priv->interface != PHY_INTERFACE_MODE_GMII)) { + + if (priv->speed == 100) + conf |= FES_100; + } + + if (priv->duplex == FULL) conf |= FULLDPLXMODE; writel(conf, &mac_p->conf); @@ -389,6 +404,16 @@ static int dw_reset_phy(struct eth_device *dev) return 0; } +/* + * Add weak default function for board specific PHY configuration + */ +int __weak designware_board_phy_init(struct eth_device *dev, int phy_addr, + int (*mii_write)(struct eth_device *, u8, u8, u16), + int dw_reset_phy(struct eth_device *)) +{ + return 0; +} + static int configure_phy(struct eth_device *dev) { struct dw_eth_dev *priv = dev->priv; @@ -398,9 +423,6 @@ static int configure_phy(struct eth_device *dev) u16 bmsr; u32 timeout; ulong start; - u16 anlpar, btsr; -#else - u16 ctrl; #endif #if defined(CONFIG_DW_SEARCH_PHY) @@ -412,6 +434,16 @@ static int configure_phy(struct eth_device *dev) #else phy_addr = priv->address; #endif + + /* + * Some boards need board specific PHY initialization. This is + * after the main driver init code but before the auto negotiation + * is run. + */ + if (designware_board_phy_init(dev, phy_addr, + eth_mdio_write, dw_reset_phy) < 0) + return -1; + if (dw_reset_phy(dev) < 0) return -1; @@ -437,72 +469,32 @@ static int configure_phy(struct eth_device *dev) #if defined(CONFIG_DW_AUTONEG) timeout = CONFIG_AUTONEG_TIMEOUT; start = get_timer(0); - + puts("Waiting for PHY auto negotiation to complete"); while (get_timer(start) < timeout) { eth_mdio_read(dev, phy_addr, MII_BMSR, &bmsr); - if (bmsr & BMSR_ANEGCOMPLETE) + if (bmsr & BMSR_ANEGCOMPLETE) { + priv->phy_configured = 1; break; - - /* Try again after 10usec */ - udelay(10); - }; - - eth_mdio_read(dev, phy_addr, MII_LPA, &anlpar); - eth_mdio_read(dev, phy_addr, MII_STAT1000, &btsr); - - if (bmsr & BMSR_ANEGCOMPLETE) { - if (btsr & PHY_1000BTSR_1000FD) { - priv->speed = SPEED_1000M; - bmcr |= BMCR_SPEED1000; - priv->duplex = FULL_DUPLEX; - bmcr |= BMCR_FULLDPLX; - } else if (btsr & PHY_1000BTSR_1000HD) { - priv->speed = SPEED_1000M; - bmcr |= BMCR_SPEED1000; - priv->duplex = HALF_DUPLEX; - bmcr &= ~BMCR_FULLDPLX; - } else if (anlpar & LPA_100FULL) { - priv->speed = SPEED_100M; - bmcr |= BMCR_SPEED100; - priv->duplex = FULL_DUPLEX; - bmcr |= BMCR_FULLDPLX; - } else if (anlpar & LPA_100HALF) { - priv->speed = SPEED_100M; - bmcr |= BMCR_SPEED100; - priv->duplex = HALF_DUPLEX; - bmcr &= ~BMCR_FULLDPLX; - } else if (anlpar & LPA_10FULL) { - priv->speed = SPEED_10M; - bmcr &= ~BMCR_SPEED100; - priv->duplex = FULL_DUPLEX; - bmcr |= BMCR_FULLDPLX; - } else { - priv->speed = SPEED_10M; - bmcr &= ~BMCR_SPEED100; - priv->duplex = HALF_DUPLEX; - bmcr &= ~BMCR_FULLDPLX; } - if (eth_mdio_write(dev, phy_addr, MII_BMCR, bmcr) < 0) - return -1; - } else - return -1; -#else - if (eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl) < 0) - return -1; - if (ctrl & BMCR_FULLDPLX) - priv->duplex = FULL_DUPLEX; - else - priv->duplex = HALF_DUPLEX; + /* Print dot all 1s to show progress */ + if ((get_timer(start) % 1000) == 0) + putc('.'); - if (ctrl & BMCR_SPEED1000) - priv->speed = SPEED_1000M; - else if (ctrl & BMCR_SPEED100) - priv->speed = SPEED_100M; + /* Try again after 1msec */ + udelay(1000); + }; + + if (!(bmsr & BMSR_ANEGCOMPLETE)) + puts(" TIMEOUT!\n"); else - priv->speed = SPEED_10M; -#endif + puts(" done\n"); +#else priv->phy_configured = 1; +#endif + + priv->speed = miiphy_speed(dev->name, phy_addr); + priv->duplex = miiphy_duplex(dev->name, phy_addr); return 0; } @@ -531,7 +523,7 @@ static int dw_mii_write(const char *devname, u8 addr, u8 reg, u16 val) } #endif -int designware_initialize(u32 id, ulong base_addr, u32 phy_addr) +int designware_initialize(u32 id, ulong base_addr, u32 phy_addr, u32 interface) { struct eth_device *dev; struct dw_eth_dev *priv; @@ -565,11 +557,7 @@ int designware_initialize(u32 id, ulong base_addr, u32 phy_addr) DW_DMA_BASE_OFFSET); priv->address = phy_addr; priv->phy_configured = 0; - - if (mac_reset(dev) < 0) - return -1; - - configure_phy(dev); + priv->interface = interface; dev->init = dw_eth_init; dev->send = dw_eth_send; |
