summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/nand/omap_gpmc.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/nand/omap_gpmc.c')
-rw-r--r--drivers/mtd/nand/omap_gpmc.c108
1 files changed, 61 insertions, 47 deletions
diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c
index 5e7e6b3375..790d5385e0 100644
--- a/drivers/mtd/nand/omap_gpmc.c
+++ b/drivers/mtd/nand/omap_gpmc.c
@@ -283,53 +283,55 @@ static void omap_hwecc_init_bch(struct nand_chip *chip, int32_t mode)
if (bch->ecc_scheme == OMAP_ECC_BCH8_CODE_HW) {
wr_mode = BCH_WRAPMODE_1;
- switch (bch->nibbles) {
- case ECC_BCH4_NIBBLES:
- unused_length = 3;
- break;
- case ECC_BCH8_NIBBLES:
- unused_length = 2;
- break;
- case ECC_BCH16_NIBBLES:
- unused_length = 0;
- break;
- }
-
- /*
- * This is ecc_size_config for ELM mode.
- * Here we are using different settings for read and write access and
- * also depending on BCH strength.
- */
- switch (mode) {
- case NAND_ECC_WRITE:
- /* write access only setup eccsize1 config */
- val = ((unused_length + bch->nibbles) << 22);
- break;
+ switch (bch->nibbles) {
+ case ECC_BCH4_NIBBLES:
+ unused_length = 3;
+ break;
+ case ECC_BCH8_NIBBLES:
+ unused_length = 2;
+ break;
+ case ECC_BCH16_NIBBLES:
+ unused_length = 0;
+ break;
+ }
- case NAND_ECC_READ:
- default:
/*
- * by default eccsize0 selected for ecc1resultsize
- * eccsize0 config.
+ * This is ecc_size_config for ELM mode. Here we are using
+ * different settings for read and write access and also
+ * depending on BCH strength.
*/
- val = (bch->nibbles << 12);
- /* eccsize1 config */
- val |= (unused_length << 22);
- break;
- }
+ switch (mode) {
+ case NAND_ECC_WRITE:
+ /* write access only setup eccsize1 config */
+ val = ((unused_length + bch->nibbles) << 22);
+ break;
+
+ case NAND_ECC_READ:
+ default:
+ /*
+ * by default eccsize0 selected for ecc1resultsize
+ * eccsize0 config.
+ */
+ val = (bch->nibbles << 12);
+ /* eccsize1 config */
+ val |= (unused_length << 22);
+ break;
+ }
} else {
- /*
- * This ecc_size_config setting is for BCH sw library.
- *
- * Note: we only support BCH8 currently with BCH sw library!
- * Should be really easy to adobt to BCH4, however some omap3 have
- * flaws with BCH4.
- *
- * Here we are using wrapping mode 6 both for reading and writing, with:
- * size0 = 0 (no additional protected byte in spare area)
- * size1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area)
- */
- val = (32 << 22) | (0 << 12);
+ /*
+ * This ecc_size_config setting is for BCH sw library.
+ *
+ * Note: we only support BCH8 currently with BCH sw library!
+ * Should be really easy to adobt to BCH4, however some omap3
+ * have flaws with BCH4.
+ *
+ * Here we are using wrapping mode 6 both for reading and
+ * writing, with:
+ * size0 = 0 (no additional protected byte in spare area)
+ * size1 = 32 (skip 32 nibbles = 16 bytes per sector in
+ * spare area)
+ */
+ val = (32 << 22) | (0 << 12);
}
/* ecc size configuration */
writel(val, &gpmc_cfg->ecc_size_config);
@@ -761,7 +763,7 @@ static void __maybe_unused omap_free_bch(struct mtd_info *mtd)
static int omap_select_ecc_scheme(struct nand_chip *nand,
enum omap_ecc ecc_scheme, unsigned int pagesize, unsigned int oobsize) {
struct nand_bch_priv *bch = nand->priv;
- struct nand_ecclayout *ecclayout = nand->ecc.layout;
+ struct nand_ecclayout *ecclayout = &omap_ecclayout;
int eccsteps = pagesize / SECTOR_BYTES;
int i;
@@ -774,7 +776,7 @@ static int omap_select_ecc_scheme(struct nand_chip *nand,
bch_priv.type = 0;
nand->ecc.mode = NAND_ECC_SOFT;
nand->ecc.layout = NULL;
- nand->ecc.size = pagesize;
+ nand->ecc.size = 0;
bch->ecc_scheme = OMAP_ECC_HAM1_CODE_SW;
break;
@@ -789,6 +791,7 @@ static int omap_select_ecc_scheme(struct nand_chip *nand,
bch_priv.control = NULL;
bch_priv.type = 0;
/* populate ecc specific fields */
+ memset(&nand->ecc, 0, sizeof(struct nand_ecc_ctrl));
nand->ecc.mode = NAND_ECC_HW;
nand->ecc.strength = 1;
nand->ecc.size = SECTOR_BYTES;
@@ -798,8 +801,12 @@ static int omap_select_ecc_scheme(struct nand_chip *nand,
nand->ecc.calculate = omap_calculate_ecc;
/* define ecc-layout */
ecclayout->eccbytes = nand->ecc.bytes * eccsteps;
- for (i = 0; i < ecclayout->eccbytes; i++)
- ecclayout->eccpos[i] = i + BADBLOCK_MARKER_LENGTH;
+ for (i = 0; i < ecclayout->eccbytes; i++) {
+ if (nand->options & NAND_BUSWIDTH_16)
+ ecclayout->eccpos[i] = i + 2;
+ else
+ ecclayout->eccpos[i] = i + 1;
+ }
ecclayout->oobfree[0].offset = i + BADBLOCK_MARKER_LENGTH;
ecclayout->oobfree[0].length = oobsize - ecclayout->eccbytes -
BADBLOCK_MARKER_LENGTH;
@@ -823,6 +830,7 @@ static int omap_select_ecc_scheme(struct nand_chip *nand,
}
bch_priv.type = ECC_BCH8;
/* populate ecc specific fields */
+ memset(&nand->ecc, 0, sizeof(struct nand_ecc_ctrl));
nand->ecc.mode = NAND_ECC_HW;
nand->ecc.strength = 8;
nand->ecc.size = SECTOR_BYTES;
@@ -865,6 +873,7 @@ static int omap_select_ecc_scheme(struct nand_chip *nand,
elm_init();
bch_priv.type = ECC_BCH8;
/* populate ecc specific fields */
+ memset(&nand->ecc, 0, sizeof(struct nand_ecc_ctrl));
nand->ecc.mode = NAND_ECC_HW;
nand->ecc.strength = 8;
nand->ecc.size = SECTOR_BYTES;
@@ -891,6 +900,11 @@ static int omap_select_ecc_scheme(struct nand_chip *nand,
debug("nand: error: ecc scheme not enabled or supported\n");
return -EINVAL;
}
+
+ /* nand_scan_tail() sets ham1 sw ecc; hw ecc layout is set by driver */
+ if (ecc_scheme != OMAP_ECC_HAM1_CODE_SW)
+ nand->ecc.layout = ecclayout;
+
return 0;
}
OpenPOWER on IntegriCloud