diff options
Diffstat (limited to 'drivers/mtd/nand/docg4_spl.c')
| -rw-r--r-- | drivers/mtd/nand/docg4_spl.c | 219 |
1 files changed, 0 insertions, 219 deletions
diff --git a/drivers/mtd/nand/docg4_spl.c b/drivers/mtd/nand/docg4_spl.c deleted file mode 100644 index 351b75a090..0000000000 --- a/drivers/mtd/nand/docg4_spl.c +++ /dev/null @@ -1,219 +0,0 @@ -/* - * SPL driver for Diskonchip G4 nand flash - * - * Copyright (C) 2013 Mike Dunn <mikedunn@newsguy.com> - * - * SPDX-License-Identifier: GPL-2.0+ - * - * This driver basically mimics the load functionality of a typical IPL (initial - * program loader) resident in the 2k NOR-like region of the docg4 that is - * mapped to the reset vector. It allows the u-boot SPL to continue loading if - * the IPL loads a fixed number of flash blocks that is insufficient to contain - * the entire u-boot image. In this case, a concatenated spl + u-boot image is - * written at the flash offset from which the IPL loads an image, and when the - * IPL jumps to the SPL, the SPL resumes loading where the IPL left off. See - * the palmtreo680 for an example. - * - * This driver assumes that the data was written to the flash using the device's - * "reliable" mode, and also assumes that each 512 byte page is stored - * redundantly in the subsequent page. This storage format is likely to be used - * by all boards that boot from the docg4. The format compensates for the lack - * of ecc in the IPL. - * - * Reliable mode reduces the capacity of a block by half, and the redundant - * pages reduce it by half again. As a result, the normal 256k capacity of a - * block is reduced to 64k for the purposes of the IPL/SPL. - */ - -#include <asm/io.h> -#include <linux/mtd/docg4.h> - -/* forward declarations */ -static inline void write_nop(void __iomem *docptr); -static int poll_status(void __iomem *docptr); -static void write_addr(void __iomem *docptr, uint32_t docg4_addr); -static void address_sequence(unsigned int g4_page, unsigned int g4_index, - void __iomem *docptr); -static int docg4_load_block_reliable(uint32_t flash_offset, void *dest_addr); - -int nand_spl_load_image(uint32_t offs, unsigned int size, void *dst) -{ - void *load_addr = dst; - uint32_t flash_offset = offs; - const unsigned int block_count = - (size + DOCG4_BLOCK_CAPACITY_SPL - 1) - / DOCG4_BLOCK_CAPACITY_SPL; - int i; - - for (i = 0; i < block_count; i++) { - int ret = docg4_load_block_reliable(flash_offset, load_addr); - if (ret) - return ret; - load_addr += DOCG4_BLOCK_CAPACITY_SPL; - flash_offset += DOCG4_BLOCK_SIZE; - } - return 0; -} - -static inline void write_nop(void __iomem *docptr) -{ - writew(0, docptr + DOC_NOP); -} - -static int poll_status(void __iomem *docptr) -{ - /* - * Busy-wait for the FLASHREADY bit to be set in the FLASHCONTROL - * register. Operations known to take a long time (e.g., block erase) - * should sleep for a while before calling this. - */ - - uint8_t flash_status; - - /* hardware quirk requires reading twice initially */ - flash_status = readb(docptr + DOC_FLASHCONTROL); - - do { - flash_status = readb(docptr + DOC_FLASHCONTROL); - } while (!(flash_status & DOC_CTRL_FLASHREADY)); - - return 0; -} - -static void write_addr(void __iomem *docptr, uint32_t docg4_addr) -{ - /* write the four address bytes packed in docg4_addr to the device */ - - writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS); - docg4_addr >>= 8; - writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS); - docg4_addr >>= 8; - writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS); - docg4_addr >>= 8; - writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS); -} - -static void address_sequence(unsigned int g4_page, unsigned int g4_index, - void __iomem *docptr) -{ - writew(DOCG4_SEQ_PAGE_READ, docptr + DOC_FLASHSEQUENCE); - writew(DOCG4_CMD_PAGE_READ, docptr + DOC_FLASHCOMMAND); - write_nop(docptr); - write_addr(docptr, ((uint32_t)g4_page << 16) | g4_index); - write_nop(docptr); -} - -static int docg4_load_block_reliable(uint32_t flash_offset, void *dest_addr) -{ - void __iomem *docptr = (void *)CONFIG_SYS_NAND_BASE; - unsigned int g4_page = flash_offset >> 11; /* 2k page */ - const unsigned int last_g4_page = g4_page + 0x80; /* last in block */ - int g4_index = 0; - uint16_t flash_status; - uint16_t *buf; - - /* flash_offset must be aligned to the start of a block */ - if (flash_offset & 0x3ffff) - return -1; - - writew(DOC_SEQ_RESET, docptr + DOC_FLASHSEQUENCE); - writew(DOC_CMD_RESET, docptr + DOC_FLASHCOMMAND); - write_nop(docptr); - write_nop(docptr); - poll_status(docptr); - write_nop(docptr); - writew(0x45, docptr + DOC_FLASHSEQUENCE); - writew(0xa3, docptr + DOC_FLASHCOMMAND); - write_nop(docptr); - writew(0x22, docptr + DOC_FLASHCOMMAND); - write_nop(docptr); - - /* read 1st 4 oob bytes of first subpage of block */ - address_sequence(g4_page, 0x0100, docptr); /* index at oob */ - write_nop(docptr); - flash_status = readw(docptr + DOC_FLASHCONTROL); - flash_status = readw(docptr + DOC_FLASHCONTROL); - if (flash_status & 0x06) /* sequence or protection errors */ - return -1; - writew(DOCG4_CMD_READ2, docptr + DOC_FLASHCOMMAND); - write_nop(docptr); - write_nop(docptr); - poll_status(docptr); - writew(DOC_ECCCONF0_READ_MODE | 4, docptr + DOC_ECCCONF0); - write_nop(docptr); - write_nop(docptr); - write_nop(docptr); - write_nop(docptr); - write_nop(docptr); - - /* - * Here we read the first four oob bytes of the first page of the block. - * The IPL on the palmtreo680 requires that this contain a 32 bit magic - * number, or the load aborts. We'll ignore it. - */ - readw(docptr + 0x103c); /* hw quirk; 1st read discarded */ - readw(docptr + 0x103c); /* lower 16 bits of magic number */ - readw(docptr + DOCG4_MYSTERY_REG); /* upper 16 bits of magic number */ - writew(0, docptr + DOC_DATAEND); - write_nop(docptr); - write_nop(docptr); - - /* load contents of block to memory */ - buf = (uint16_t *)dest_addr; - do { - int i; - - address_sequence(g4_page, g4_index, docptr); - writew(DOCG4_CMD_READ2, - docptr + DOC_FLASHCOMMAND); - write_nop(docptr); - write_nop(docptr); - poll_status(docptr); - writew(DOC_ECCCONF0_READ_MODE | - DOC_ECCCONF0_ECC_ENABLE | - DOCG4_BCH_SIZE, - docptr + DOC_ECCCONF0); - write_nop(docptr); - write_nop(docptr); - write_nop(docptr); - write_nop(docptr); - write_nop(docptr); - - /* read the 512 bytes of page data, 2 bytes at a time */ - readw(docptr + 0x103c); /* hw quirk */ - for (i = 0; i < 256; i++) - *buf++ = readw(docptr + 0x103c); - - /* read oob, but discard it */ - for (i = 0; i < 7; i++) - readw(docptr + 0x103c); - readw(docptr + DOCG4_OOB_6_7); - readw(docptr + DOCG4_OOB_6_7); - - writew(0, docptr + DOC_DATAEND); - write_nop(docptr); - write_nop(docptr); - - if (!(g4_index & 0x100)) { - /* not redundant subpage read; check for ecc error */ - write_nop(docptr); - flash_status = readw(docptr + DOC_ECCCONF1); - flash_status = readw(docptr + DOC_ECCCONF1); - if (flash_status & 0x80) { /* ecc error */ - g4_index += 0x108; /* read redundant subpage */ - buf -= 256; /* back up ram ptr */ - continue; - } else /* no ecc error */ - g4_index += 0x210; /* skip redundant subpage */ - } else /* redundant page was just read; skip ecc error check */ - g4_index += 0x108; - - if (g4_index == 0x420) { /* finished with 2k page */ - g4_index = 0; - g4_page += 2; /* odd-numbered 2k pages skipped */ - } - - } while (g4_page != last_g4_page); /* while still on same block */ - - return 0; -} |
