diff options
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/README.arm-caches | 2 | ||||
| -rw-r--r-- | doc/README.scrapyard | 121 | ||||
| -rw-r--r-- | doc/README.video | 55 | ||||
| -rw-r--r-- | doc/README.x86 | 57 | ||||
| -rw-r--r-- | doc/git-mailrc | 2 |
5 files changed, 175 insertions, 62 deletions
diff --git a/doc/README.arm-caches b/doc/README.arm-caches index f6a52e3e38..dbb6190b95 100644 --- a/doc/README.arm-caches +++ b/doc/README.arm-caches @@ -47,7 +47,7 @@ Cleanup Before Linux: - cleanup_before_linux() should flush the D-cache, invalidate I-cache, and disable MMU and caches. - The following sequence is advisable while disabling d-cache: - 1. disable_dcache() - flushes and disables d-cache + 1. dcache_disable() - flushes and disables d-cache 2. invalidate_dcache_all() - invalid any entry that came to the cache in the short period after the cache was flushed but before the cache got disabled. diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 5d2875c9ad..b79c5a432b 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -12,54 +12,79 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= -A3000 powerpc mpc824x - - -CPC45 powerpc mpc824x - - Josef Wagner <Wagner@Microsys.de> -CU824 powerpc mpc824x - - Wolfgang Denk <wd@denx.de> -eXalion powerpc mpc824x - - Torsten Demke <torsten.demke@fci.com> -MVBLUE powerpc mpc824x - - -MUSENKI powerpc mpc824x - - Jim Thompson <jim@musenki.com> -Sandpoint8240 powerpc mpc824x - - Wolfgang Denk <wd@denx.de> -Sandpoint8245 powerpc mpc824x - - Jim Thompson <jim@musenki.com> -utx8245 powerpc mpc824x - - Greg Allen <gallen@arlut.utexas.edu> -atc powerpc mpc8260 - - Wolfgang Denk <wd@denx.de> -CPU86 powerpc mpc8260 - - Wolfgang Denk <wd@denx.de> -CPU87 powerpc mpc8260 - - -ep82xxm powerpc mpc8260 - - -gw8260 powerpc mpc8260 - - Oliver Brown <obrown@adventnetworks.com> -IPHASE4539 powerpc mpc8260 - - Wolfgang Grandegger <wg@denx.de> -muas3001 powerpc mpc8260 - - Heiko Schocher <hs@denx.de> -PM825 powerpc mpc8260 - - Wolfgang Denk <wd@denx.de> -PM826 powerpc mpc8260 - - Wolfgang Denk <wd@denx.de> -PM828 powerpc mpc8260 - - -MPC8266ADS powerpc mpc8260 - - Rune Torgersen <runet@innovsys.com> -VoVPN-GW powerpc mpc8260 - - -ep8260 powerpc mpc8260 - - Frank Panno <fpanno@delphintech.com> -ppmc8260 powerpc mpc8260 - - Brad Kemp <Brad.Kemp@seranoa.com> -sacsng powerpc mpc8260 - - Jerry Van Baren <gerald.vanbaren@smiths-aerospace.com> -cogent_mpc8260 powerpc mpc8260 - - Murray Jensen <Murray.Jensen@csiro.au> -cogent_8xx powerpc mpc8xx - - Murray Jensen <Murray.Jensen@csiro.au> -ESTEEM192E powerpc mpc8xx - - Conn Clark <clark@esteem.com> -IP860 powerpc mpc8xx - - Wolfgang Denk <wd@denx.de> -IVML24 powerpc mpc8xx - - Wolfgang Denk <wd@denx.de> -IVMS8 powerpc mpc8xx - - Wolfgang Denk <wd@denx.de> -lwmon powerpc mpc8xx - - Wolfgang Denk <wd@denx.de> -NETVIA powerpc mpc8xx - - Pantelis Antoniou <panto@intracom.gr> -R360MPI powerpc mpc8xx - - Wolfgang Denk <wd@denx.de> -RRvision powerpc mpc8xx - - Wolfgang Denk <wd@denx.de> -SPD823TS powerpc mpc8xx - - Wolfgang Denk <wd@denx.de> -KUP4K powerpc mpc8xx - - Klaus Heydeck <heydeck@kieback-peter.de> -KUP4X powerpc mpc8xx - - Klaus Heydeck <heydeck@kieback-peter.de> -ELPT860 powerpc mpc8xx - - The LEOX team <team@leox.org> -hmi1001 powerpc mpc5xxx - - -mucmc52 powerpc mpc5xxx - - Heiko Schocher <hs@denx.de> -uc101 powerpc mpc5xxx - - Heiko Schocher <hs@denx.de> -uc100 powerpc mpc8xx - - Stefan Roese <sr@denx.de> -FPS850L powerpc mpc8xx - - Wolfgang Denk <wd@denx.de> -FPS860L powerpc mpc8xx - - Wolfgang Denk <wd@denx.de> -NSCU powerpc mpc8xx - - -SM850 powerpc mpc8xx - - Wolfgang Denk <wd@denx.de> -TK885D powerpc mpc8xx - - -virtlab2 powerpc mpc8xx - - Wolfgang Denk <wd@denx.de> +P3G4 powerpc 74xx_7xx - - Wolfgang Denk <wd@denx.de> +ZUMA powerpc 74xx_7xx - - Nye Liu <nyet@zumanetworks.com> +ppmc7xx powerpc 74xx_7xx - - +ELPPC powerpc 74xx_7xx - - +mpc7448hpc2 powerpc 74xx_7xx - - Roy Zang <tie-fei.zang@freescale.com> +CPCI405 ppc4xx 405gp 5f1459dc 2015-01-13 Matthias Fuchs <matthias.fuchs@esd.eu> +CPCI405DT ppc4xx 405gpr 5f1459dc 2015-01-13 Matthias Fuchs <matthias.fuchs@esd.eu> +CPCI405AB ppc4xx 405gpr 5f1459dc 2015-01-13 Matthias Fuchs <matthias.fuchs@esd.eu> +G2000 ppc4xx 405ep 5f8f6294 2015-01-13 Matthias Fuchs <matthias.fuchs@esd.eu> +WUH405 ppc4xx 405ep fc88a5bf 2015-01-13 Matthias Fuchs <matthias.fuchs@esd.eu> +VOH405 ppc4xx 405ep 807db88b 2015-01-13 Matthias Fuchs <matthias.fuchs@esd.eu> +PMC405 ppc4xx 405gp d5263304 2015-01-13 Matthias Fuchs <matthias.fuchs@esd.eu> +PCI405 ppc4xx 405gp dbe7bb0d 2015-01-13 Matthias Fuchs <matthias.fuchs@esd.eu> +OCRTC ppc4xx 405gpr cc6e715f 2015-01-13 Matthias Fuchs <matthias.fuchs@esd.eu> +HUB405 ppc4xx 405ep e434d5d7 2015-01-13 Matthias Fuchs <matthias.fuchs@esd.eu> +HH405 ppc4xx 405ep 843125da 2015-01-13 Matthias Fuchs <matthias.fuchs@esd.eu> +DU440 ppc4xx 440epx 7ac9d47a 2015-01-13 Matthias Fuchs <matthias.fuchs@esd.eu> +DU405 ppc4xx 405gpr bc114076 2015-01-13 Matthias Fuchs <matthias.fuchs@esd.eu> +DP405 ppc4xx 405ep 9a4018e0 2015-01-13 Matthias Fuchs <matthias.fuchs@esd.eu> +CPCIISER4 ppc4xx 405gp 37057260 2015-01-13 Matthias Fuchs <matthias.fuchs@esd.eu> +CMS700 ppc4xx 405ep 2404124c 2015-01-13 Matthias Fuchs <matthias.fuchs@esd.eu> +ASH405 ppc4xx 405ep b5e7c84f 2015-01-13 Matthias Fuchs <matthias.fuchs@esd.eu> +AR405 ppc4xx 405gpr 61b57c4a 2015-01-13 Matthias Fuchs <matthias.fuchs@esd.eu> +APC405 ppc4xx 405gpr 2b8a04e5 2015-01-13 Matthias Fuchs <matthias.fuchs@esd.eu> +TASREG m68k mcf52x2 cbdc662a 2015-01-13 Matthias Fuchs <matthias.fuchs@esd.eu> +A3000 powerpc mpc824x d622ac39 2015-01-05 +CPC45 powerpc mpc824x d622ac39 2015-01-05 Josef Wagner <Wagner@Microsys.de> +CU824 powerpc mpc824x d622ac39 2015-01-05 Wolfgang Denk <wd@denx.de> +eXalion powerpc mpc824x d622ac39 2015-01-05 Torsten Demke <torsten.demke@fci.com> +MVBLUE powerpc mpc824x d622ac39 2015-01-05 +MUSENKI powerpc mpc824x d622ac39 2015-01-05 Jim Thompson <jim@musenki.com> +Sandpoint8240 powerpc mpc824x d622ac39 2015-01-05 Wolfgang Denk <wd@denx.de> +Sandpoint8245 powerpc mpc824x d622ac39 2015-01-05 Jim Thompson <jim@musenki.com> +utx8245 powerpc mpc824x d622ac39 2015-01-05 Greg Allen <gallen@arlut.utexas.edu> +atc powerpc mpc8260 9067b300 2015-01-05 Wolfgang Denk <wd@denx.de> +CPU86 powerpc mpc8260 f7e1af86 2015-01-05 Wolfgang Denk <wd@denx.de> +CPU87 powerpc mpc8260 f7e1af86 2015-01-05 +ep82xxm powerpc mpc8260 e2b19629 2015-01-05 +gw8260 powerpc mpc8260 8eecbaf3 2015-01-05 Oliver Brown <obrown@adventnetworks.com> +IPHASE4539 powerpc mpc8260 87882f57 2015-01-05 Wolfgang Grandegger <wg@denx.de> +muas3001 powerpc mpc8260 d2fd1d66 2015-01-05 Heiko Schocher <hs@denx.de> +PM825 powerpc mpc8260 dc0b2fb4 2015-01-05 Wolfgang Denk <wd@denx.de> +PM826 powerpc mpc8260 dc0b2fb4 2015-01-05 Wolfgang Denk <wd@denx.de> +PM828 powerpc mpc8260 dc0b2fb4 2015-01-05 +MPC8266ADS powerpc mpc8260 b3a2bbe1 2015-01-05 Rune Torgersen <runet@innovsys.com> +VoVPN-GW powerpc mpc8260 cc90905f 2015-01-05 +ep8260 powerpc mpc8260 4ad015ba 2015-01-05 Frank Panno <fpanno@delphintech.com> +ppmc8260 powerpc mpc8260 793116d2 2015-01-05 Brad Kemp <Brad.Kemp@seranoa.com> +sacsng powerpc mpc8260 b35c0ad6 2015-01-05 Jerry Van Baren <gerald.vanbaren@smiths-aerospace.com> +cogent_mpc8260 powerpc mpc8260 d19f6a60 2015-01-05 Murray Jensen <Murray.Jensen@csiro.au> +cogent_8xx powerpc mpc8xx d19f6a60 2015-01-05 Murray Jensen <Murray.Jensen@csiro.au> +ESTEEM192E powerpc mpc8xx af0e3514 2015-01-05 Conn Clark <clark@esteem.com> +IP860 powerpc mpc8xx 5ec71100 2015-01-05 Wolfgang Denk <wd@denx.de> +IVML24 powerpc mpc8xx ca620cd1 2015-01-05 Wolfgang Denk <wd@denx.de> +IVMS8 powerpc mpc8xx ca620cd1 2015-01-05 Wolfgang Denk <wd@denx.de> +lwmon powerpc mpc8xx acc2372d 2015-01-05 Wolfgang Denk <wd@denx.de> +NETVIA powerpc mpc8xx f017cd7f 2015-01-05 Pantelis Antoniou <panto@intracom.gr> +R360MPI powerpc mpc8xx 79cbecb8 2015-01-05 Wolfgang Denk <wd@denx.de> +RRvision powerpc mpc8xx 8737fc75 2015-01-05 Wolfgang Denk <wd@denx.de> +SPD823TS powerpc mpc8xx 72ba368f 2015-01-05 Wolfgang Denk <wd@denx.de> +KUP4K powerpc mpc8xx 4317d070 2015-01-05 Klaus Heydeck <heydeck@kieback-peter.de> +KUP4X powerpc mpc8xx 4317d070 2015-01-05 Klaus Heydeck <heydeck@kieback-peter.de> +ELPT860 powerpc mpc8xx 3c5b20f1 2015-01-05 The LEOX team <team@leox.org> +hmi1001 powerpc mpc5xxx ceaf499b 2015-01-05 +mucmc52 powerpc mpc5xxx ceaf499b 2015-01-05 Heiko Schocher <hs@denx.de> +uc101 powerpc mpc5xxx ceaf499b 2015-01-05 Heiko Schocher <hs@denx.de> +uc100 powerpc mpc8xx ceaf499b 2015-01-05 Stefan Roese <sr@denx.de> +FPS850L powerpc mpc8xx 5d2a5ef7 2015-01-05 Wolfgang Denk <wd@denx.de> +FPS860L powerpc mpc8xx 5d2a5ef7 2015-01-05 Wolfgang Denk <wd@denx.de> +NSCU powerpc mpc8xx 5d2a5ef7 2015-01-05 +SM850 powerpc mpc8xx 5d2a5ef7 2015-01-05 Wolfgang Denk <wd@denx.de> +TK885D powerpc mpc8xx 5d2a5ef7 2015-01-05 +virtlab2 powerpc mpc8xx 5d2a5ef7 2015-01-05 Wolfgang Denk <wd@denx.de> hermes powerpc mpc8xx 36da51e 2014-12-08 Wolfgang Denk <wd@denx.de> PRS200 powerpc mpc5200 ecfdcee 2014-11-12 MCC200 powerpc mpc5200 ecfdcee 2014-11-12 diff --git a/doc/README.video b/doc/README.video index dadbfcd2fd..d0a3ad6e8d 100644 --- a/doc/README.video +++ b/doc/README.video @@ -5,15 +5,8 @@ * SPDX-License-Identifier: GPL-2.0+ */ -U-Boot MPC8xx video controller driver -====================================== - -The driver has been tested with the following configurations: - -- MPC823FADS with AD7176 on a PAL TV (YCbYCr) - arsenio@tin.it - "video-mode" environment variable -=============================== +================================= The 'video-mode' environment variable can be used to enable and configure some video drivers. The format matches the video= command-line option used @@ -28,4 +21,50 @@ for Linux: <freq> The frequency (in Hz) to use. <options> A comma-separated list of device-specific options + +U-Boot MPC8xx video controller driver +===================================== + +The driver has been tested with the following configurations: + +- MPC823FADS with AD7176 on a PAL TV (YCbYCr) - arsenio@tin.it + Example: video-mode=fslfb:1280x1024-32@60,monitor=dvi + + +U-boot sunxi video controller driver +==================================== + +U-boot supports hdmi and lcd output on Allwinner sunxi SoCs, lcd output +requires the CONFIG_VIDEO_LCD_MODE Kconfig value to be set. + +The sunxi u-boot driver supports the following video-mode options: + +- monitor=[none|dvi|hdmi|lcd] - Select the video output to use + none: Disable video output. + dvi/hdmi: Selects output over the hdmi connector with dvi resp. hdmi output + format, if edid is used the format is automatically selected. + lcd: Selects video output to a LCD screen. + vga: Selects bideo output over the VGA connector. + Defaults to monitor=dvi. + +- hpd=[0|1] - Enable use of the hdmi HotPlug Detect feature + 0: Disabled. Configure dvi/hdmi output even if no cable is detected + 1: Enabled. Fallback to the lcd / vga / none in that order (if available) + Defaults to hpd=1. + +- hpd_delay=<int> - How long to wait for the hdmi HPD signal in milliseconds + When the monitor and the board power up at the same time, it may take some + time for the monitor to assert the HPD signal. This configures how long to + wait for the HPD signal before assuming no cable is connected. + Defaults to hpd_delay=500. + +- edid=[0|1] - Enable use of DDC + EDID to get monitor info + 0: Disabled. + 1: Enabled. If valid EDID info was read from the monitor the EDID info will + overrides the xres, yres and refresh from the video-mode env. variable. + Defaults to edid=1. + +For example to always use the hdmi connector, even if no cable is inserted, +using edid info when available and otherwise initalizing it at 1024x768@60Hz, +use: "setenv video-mode sunxi:1024x768-24@60,monitor=dvi,hpd=0,edid=1". diff --git a/doc/README.x86 b/doc/README.x86 index 5fab04491f..7df8cc516a 100644 --- a/doc/README.x86 +++ b/doc/README.x86 @@ -32,6 +32,21 @@ on other architectures, like below: $ make coreboot-x86_defconfig $ make all +Note this default configuration will build a U-Boot payload for the Link board. +To build a coreboot payload against another board, you can change the build +configuration during the 'make menuconfig' process. + +x86 architecture ---> + ... + (chromebook_link) Board configuration file + (chromebook_link) Board Device Tree Source (dts) file + (0x19200000) Board specific Cache-As-RAM (CAR) address + (0x4000) Board specific Cache-As-RAM (CAR) size + +Change the 'Board configuration file' and 'Board Device Tree Source (dts) file' +to point to a new board. You can also change the Cache-As-RAM (CAR) related +settings here if the default values do not fit your new board. + Building ROM version of U-Boot (hereafter referred to as u-boot.rom) is a little bit tricky, as generally it requires several binary blobs which are not shipped in the U-Boot source tree. Due to this reason, the u-boot.rom build is @@ -88,11 +103,31 @@ in this FSP package too. Rename the first one to fsp.bin and second one to cmc.bin and put them in the board directory. -Now you can build U-Boot and obtaim u-boot.rom +Now you can build U-Boot and obtain u-boot.rom $ make crownbay_defconfig $ make all +Test with coreboot +------------------ +For testing U-Boot as the coreboot payload, there are things that need be paid +attention to. coreboot supports loading an ELF executable and a 32-bit plain +binary, as well as other supported payloads. With the default configuration, +U-Boot is set up to use a separate Device Tree Blob (dtb). As of today, the +generated u-boot-dtb.bin needs to be packaged by the cbfstool utility (a tool +provided by coreboot) manually as coreboot's 'make menuconfig' does not provide +this capability yet. The command is as follows: + +# in the coreboot root directory +$ ./build/util/cbfstool/cbfstool build/coreboot.rom add-flat-binary \ + -f u-boot-dtb.bin -n fallback/payload -c lzma -l 0x1110000 -e 0x1110015 + +Make sure 0x1110000 matches CONFIG_SYS_TEXT_BASE and 0x1110015 matches the +symbol address of _start (in arch/x86/cpu/start.S). + +If you want to use ELF as the coreboot payload, change U-Boot configuration to +use CONFIG_OF_EMBED. + CPU Microcode ------------- Modern CPU usually requires a special bit stream called microcode [5] to be @@ -106,13 +141,29 @@ x86 has been converted to use driver model for serial and GPIO. Device Tree ----------- x86 uses device tree to configure the board thus requires CONFIG_OF_CONTROL to -be turned on. Not every device on the board is configured via devie tree, but +be turned on. Not every device on the board is configured via device tree, but more and more devices will be added as time goes by. Check out the directory arch/x86/dts/ for these device tree source files. +Useful Commands +--------------- + +In keeping with the U-Boot philosophy of providing functions to check and +adjust internal settings, there are several x86-specific commands that may be +useful: + +hob - Display information about Firmware Support Package (FSP) Hand-off + Block. This is only available on platforms which use FSP, mostly + Atom. +iod - Display I/O memory +iow - Write I/O memory +mtrr - List and set the Memory Type Range Registers (MTRR). These are used to + tell the CPU whether memory is cacheable and if so the cache write + mode to use. U-Boot sets up some reasonable values but you can + adjust then with this command. + TODO List --------- -- MTRR support (for performance) - Audio - Chrome OS verified boot - SMI and ACPI support, to provide platform info and facilities to Linux diff --git a/doc/git-mailrc b/doc/git-mailrc index d90793a6a6..8ba599cd9d 100644 --- a/doc/git-mailrc +++ b/doc/git-mailrc @@ -98,8 +98,6 @@ alias mpc83xx uboot, kimphill alias mpc85xx uboot, afleming, galak alias mpc86xx uboot, afleming, galak alias ppc4xx uboot, stroese -alias ppc7xx uboot, wd -alias ppc74xx uboot, wd alias sandbox sjg alias sb sandbox |
