1 files changed, 0 insertions, 73 deletions
diff --git a/doc/README.mpc8610hpcd b/doc/README.mpc8610hpcd
deleted file mode 100644
index 31a9af3fee..0000000000
--- a/doc/README.mpc8610hpcd
+++ /dev/null
@@ -1,73 +0,0 @@
-Freescale MPC8610HPCD board
-===========================
-
-
-Building U-Boot
----------------
-
-    $ make MPC8610HPCD_config
-    Configuring for MPC8610HPCD board...
-
-    $ make
-
-
-Flashing U-Boot
----------------
-The flash is 128M starting at 0xF800_0000.
-
-The alternate image is at 0xFBF0_0000
-The      boot image is at 0xFFF0_0000.
-
-
-To Flash U-Boot into the booting bank:
-
-	tftp 1000000 u-boot.bin
-	protect off all
-	erase fff00000 +$filesize
-	cp.b 1000000 fff00000 $filesize
-
-
-To Flash U-boot into the alternate bank
-
-	tftp 1000000 u-boot.bin
-	erase fbf00000 +$filesize
-	cp.b 1000000 fbf00000 $filesize
-
-
-pixis_reset command
--------------------
-A new command, "pixis_reset", is introduced to reset mpc8610hpcd board
-using the FPGA sequencer.  When the board restarts, it has the option
-of using either the current or alternate flash bank as the boot
-image, with or without the watchdog timer enabled, and finally with
-or without frequency changes.
-
-Usage is;
-
-	pixis_reset
-	pixis_reset altbank
-	pixis_reset altbank wd
-	pixis_reset altbank cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>
-	pixis_reset cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>
-
-Examples;
-
-	/* reset to current bank, like "reset" command */
-	pixis_reset
-
-	/* reset board but use the to alternate flash bank */
-	pixis_reset altbank
-
-	/* reset board, use alternate flash bank with watchdog timer enabled*/
-	pixis_reset altbank wd
-
-	/* reset board to alternate bank with frequency changed.
-	 * 40 is SYSCLK, 2.5 is COREPLL ratio, 10 is MPXPLL ratio
-	 */
-	pixis-reset altbank cf 40 2.5 10
-
-
-DIP Switch Settings
--------------------
-To manually switch the flash banks using the DIP switch
-settings, toggle both SW6:1 and SW6:2.