diff options
Diffstat (limited to 'doc/README.m5253evbe')
| -rw-r--r-- | doc/README.m5253evbe | 103 |
1 files changed, 0 insertions, 103 deletions
diff --git a/doc/README.m5253evbe b/doc/README.m5253evbe deleted file mode 100644 index f51609f3e0..0000000000 --- a/doc/README.m5253evbe +++ /dev/null @@ -1,103 +0,0 @@ -Freescale Amadeus Plus M5253EVBE board -====================================== - -Hayden Fraser(Hayden.Fraser@freescale.com) -Created 06/05/2007 -=========================================== - - -1. SWITCH SETTINGS -================== -1.1 N/A - - -2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL -=========================================== -2.1. For the initial bringup, we adopted a consistent memory scheme between u-boot and - linux kernel, you can customize it based on your system requirements: - SDR: 0x00000000-0x00ffffff - SRAM0: 0x20010000-0x20017fff - SRAM1: 0x20000000-0x2000ffff - MBAR1: 0x10000000-0x4fffffff - MBAR2: 0x80000000-0xCfffffff - Flash: 0xffe00000-0xffffffff - -3. DEFINITIONS AND COMPILATION -============================== -3.1 Explanation on NEW definitions in include/configs/M5253EVBE.h - CONFIG_MCF52x2 Processor family - CONFIG_MCF5253 MCF5253 specific - CONFIG_M5253EVBE Amadeus Plus board specific - CONFIG_SYS_CLK Define Amadeus Plus CPU Clock - CONFIG_SYS_MBAR MBAR base address - CONFIG_SYS_MBAR2 MBAR2 base address - -3.2 Compilation - export CROSS_COMPILE=/usr/local/freescale-coldfire-4.1-elf/bin/m68k-elf- - cd u-boot-1-2-x - make distclean - make M5253EVBE_config - make - - -4. SCREEN DUMP -============== -4.1 U-Boot 1.2.0 (Jun 18 2007 - 18:20:00) - -CPU: Freescale Coldfire MCF5253 at 62 MHz -Board: Freescale MCF5253 EVBE -DRAM: 16 MB -FLASH: 2 MB -In: serial -Out: serial -Err: serial -=> flinfo - -Bank # 1: CFI conformant FLASH (16 x 16) Size: 2 MB in 35 Sectors - AMD Standard command set, Manufacturer ID: 0x01, Device ID: 0x49 - Erase timeout: 16384 ms, write timeout: 1 ms - - Sector Start Addresses: - FFE00000 RO FFE04000 RO FFE06000 RO FFE08000 RO FFE10000 RO - FFE20000 FFE30000 FFE40000 FFE50000 FFE60000 - FFE70000 FFE80000 FFE90000 FFEA0000 FFEB0000 - FFEC0000 FFED0000 FFEE0000 FFEF0000 FFF00000 - FFF10000 FFF20000 FFF30000 FFF40000 FFF50000 - FFF60000 FFF70000 FFF80000 FFF90000 FFFA0000 - FFFB0000 FFFC0000 FFFD0000 FFFE0000 FFFF0000 - -=> bdinfo -boot_params = 0x00F62F90 -memstart = 0x00000000 -memsize = 0x01000000 -flashstart = 0xFFE00000 -flashsize = 0x00200000 -flashoffset = 0x00000000 -baudrate = 19200 bps - -=> printenv -bootdelay=5 -baudrate=19200 -stdin=serial -stdout=serial -stderr=serial - -Environment size: 134/8188 bytes -=> saveenv -Saving Environment to Flash... -Un-Protected 1 sectors -Erasing Flash... -. done -Erased 1 sectors -Writing to Flash... done -Protected 1 sectors -=> - -5. COMPILER ------------ -To create U-Boot the CodeSourcery's version of the GNU Toolchain for the ColdFire architecture -compiler set (freescale-coldfire-4.1-elf) from www.codesourcery.com was used. -You can download it from:http://www.codesourcery.com/gnu_toolchains/coldfire/download.html - -compiler that you used - for example, codesourcery_elf requires -MQ in rules.mk, old M68K 2.95.3 just -M -codesourcery_elf requires -MQ in rules.mk, old M68K 2.95.3 just -M |
