summaryrefslogtreecommitdiffstats
path: root/cpu/ppc4xx
diff options
context:
space:
mode:
Diffstat (limited to 'cpu/ppc4xx')
-rw-r--r--cpu/ppc4xx/44x_spd_ddr2.c276
-rw-r--r--cpu/ppc4xx/4xx_enet.c492
-rw-r--r--cpu/ppc4xx/4xx_uart.c2
-rw-r--r--cpu/ppc4xx/Makefile13
-rw-r--r--cpu/ppc4xx/cpu.c41
-rw-r--r--cpu/ppc4xx/cpu_init.c15
-rw-r--r--cpu/ppc4xx/interrupts.c237
-rw-r--r--cpu/ppc4xx/iop480_uart.c1
-rw-r--r--cpu/ppc4xx/speed.c9
-rw-r--r--cpu/ppc4xx/start.S19
-rw-r--r--cpu/ppc4xx/uic.c180
-rw-r--r--cpu/ppc4xx/usbdev.c4
-rw-r--r--cpu/ppc4xx/xilinx_irq.c100
13 files changed, 694 insertions, 695 deletions
diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c
index e9940e8e5b..1c3632428c 100644
--- a/cpu/ppc4xx/44x_spd_ddr2.c
+++ b/cpu/ppc4xx/44x_spd_ddr2.c
@@ -50,9 +50,19 @@
#include "ecc.h"
-#if defined(CONFIG_SPD_EEPROM) && \
- (defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT))
+#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR2)
+
+#define PPC4xx_IBM_DDR2_DUMP_REGISTER(mnemonic) \
+ do { \
+ u32 data; \
+ mfsdram(SDRAM_##mnemonic, data); \
+ printf("%20s[%02x] = 0x%08X\n", \
+ "SDRAM_" #mnemonic, SDRAM_##mnemonic, data); \
+ } while (0)
+
+static inline void ppc4xx_ibm_ddr2_register_dump(void);
+
+#if defined(CONFIG_SPD_EEPROM)
/*-----------------------------------------------------------------------------+
* Defines
@@ -257,7 +267,6 @@ static void test(void);
#else
static void DQS_calibration_process(void);
#endif
-static void ppc440sp_sdram_register_dump(void);
int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
void dcbz_area(u32 start_address, u32 num_bytes);
@@ -607,7 +616,7 @@ phys_size_t initdram(int board_type)
remove_tlb(0, dram_size);
program_tlb(0, 0, dram_size, MY_TLB_WORD2_I_ENABLE);
- ppc440sp_sdram_register_dump();
+ ppc4xx_ibm_ddr2_register_dump();
/*
* Clear potential errors resulting from auto-calibration.
@@ -2760,7 +2769,7 @@ calibration_loop:
printf("\nERROR: Cannot determine a common read delay for the "
"DIMM(s) installed.\n");
debug("%s[%d] ERROR : \n", __FUNCTION__,__LINE__);
- ppc440sp_sdram_register_dump();
+ ppc4xx_ibm_ddr2_register_dump();
spd_ddr_init_hang ();
}
@@ -2946,169 +2955,8 @@ static void test(void)
}
#endif
-#if defined(DEBUG)
-static void ppc440sp_sdram_register_dump(void)
-{
- unsigned int sdram_reg;
- unsigned int sdram_data;
- unsigned int dcr_data;
-
- printf("\n Register Dump:\n");
- sdram_reg = SDRAM_MCSTAT;
- mfsdram(sdram_reg, sdram_data);
- printf(" SDRAM_MCSTAT = 0x%08X", sdram_data);
- sdram_reg = SDRAM_MCOPT1;
- mfsdram(sdram_reg, sdram_data);
- printf(" SDRAM_MCOPT1 = 0x%08X\n", sdram_data);
- sdram_reg = SDRAM_MCOPT2;
- mfsdram(sdram_reg, sdram_data);
- printf(" SDRAM_MCOPT2 = 0x%08X", sdram_data);
- sdram_reg = SDRAM_MODT0;
- mfsdram(sdram_reg, sdram_data);
- printf(" SDRAM_MODT0 = 0x%08X\n", sdram_data);
- sdram_reg = SDRAM_MODT1;
- mfsdram(sdram_reg, sdram_data);
- printf(" SDRAM_MODT1 = 0x%08X", sdram_data);
- sdram_reg = SDRAM_MODT2;
- mfsdram(sdram_reg, sdram_data);
- printf(" SDRAM_MODT2 = 0x%08X\n", sdram_data);
- sdram_reg = SDRAM_MODT3;
- mfsdram(sdram_reg, sdram_data);
- printf(" SDRAM_MODT3 = 0x%08X", sdram_data);
- sdram_reg = SDRAM_CODT;
- mfsdram(sdram_reg, sdram_data);
- printf(" SDRAM_CODT = 0x%08X\n", sdram_data);
- sdram_reg = SDRAM_VVPR;
- mfsdram(sdram_reg, sdram_data);
- printf(" SDRAM_VVPR = 0x%08X", sdram_data);
- sdram_reg = SDRAM_OPARS;
- mfsdram(sdram_reg, sdram_data);
- printf(" SDRAM_OPARS = 0x%08X\n", sdram_data);
- /*
- * OPAR2 is only used as a trigger register.
- * No data is contained in this register, and reading or writing
- * to is can cause bad things to happen (hangs). Just skip it
- * and report NA
- * sdram_reg = SDRAM_OPAR2;
- * mfsdram(sdram_reg, sdram_data);
- * printf(" SDRAM_OPAR2 = 0x%08X\n", sdram_data);
- */
- printf(" SDRAM_OPART = N/A ");
- sdram_reg = SDRAM_RTR;
- mfsdram(sdram_reg, sdram_data);
- printf(" SDRAM_RTR = 0x%08X\n", sdram_data);
- sdram_reg = SDRAM_MB0CF;
- mfsdram(sdram_reg, sdram_data);
- printf(" SDRAM_MB0CF = 0x%08X", sdram_data);
- sdram_reg = SDRAM_MB1CF;
- mfsdram(sdram_reg, sdram_data);
- printf(" SDRAM_MB1CF = 0x%08X\n", sdram_data);
- sdram_reg = SDRAM_MB2CF;
- mfsdram(sdram_reg, sdram_data);
- printf(" SDRAM_MB2CF = 0x%08X", sdram_data);
- sdram_reg = SDRAM_MB3CF;
- mfsdram(sdram_reg, sdram_data);
- printf(" SDRAM_MB3CF = 0x%08X\n", sdram_data);
- sdram_reg = SDRAM_INITPLR0;
- mfsdram(sdram_reg, sdram_data);
- printf(" SDRAM_INITPLR0 = 0x%08X", sdram_data);
- sdram_reg = SDRAM_INITPLR1;
- mfsdram(sdram_reg, sdram_data);
- printf(" SDRAM_INITPLR1 = 0x%08X\n", sdram_data);
- sdram_reg = SDRAM_INITPLR2;
- mfsdram(sdram_reg, sdram_data);
- printf(" SDRAM_INITPLR2 = 0x%08X", sdram_data);
- sdram_reg = SDRAM_INITPLR3;
- mfsdram(sdram_reg, sdram_data);
- printf(" SDRAM_INITPLR3 = 0x%08X\n", sdram_data);
- sdram_reg = SDRAM_INITPLR4;
- mfsdram(sdram_reg, sdram_data);
- printf(" SDRAM_INITPLR4 = 0x%08X", sdram_data);
- sdram_reg = SDRAM_INITPLR5;
- mfsdram(sdram_reg, sdram_data);
- printf(" SDRAM_INITPLR5 = 0x%08X\n", sdram_data);
- sdram_reg = SDRAM_INITPLR6;
- mfsdram(sdram_reg, sdram_data);
- printf(" SDRAM_INITPLR6 = 0x%08X", sdram_data);
- sdram_reg = SDRAM_INITPLR7;
- mfsdram(sdram_reg, sdram_data);
- printf(" SDRAM_INITPLR7 = 0x%08X\n", sdram_data);
- sdram_reg = SDRAM_INITPLR8;
- mfsdram(sdram_reg, sdram_data);
- printf(" SDRAM_INITPLR8 = 0x%08X", sdram_data);
- sdram_reg = SDRAM_INITPLR9;
- mfsdram(sdram_reg, sdram_data);
- printf(" SDRAM_INITPLR9 = 0x%08X\n", sdram_data);
- sdram_reg = SDRAM_INITPLR10;
- mfsdram(sdram_reg, sdram_data);
- printf(" SDRAM_INITPLR10 = 0x%08X", sdram_data);
- sdram_reg = SDRAM_INITPLR11;
- mfsdram(sdram_reg, sdram_data);
- printf(" SDRAM_INITPLR11 = 0x%08X\n", sdram_data);
- sdram_reg = SDRAM_INITPLR12;
- mfsdram(sdram_reg, sdram_data);
- printf(" SDRAM_INITPLR12 = 0x%08X", sdram_data);
- sdram_reg = SDRAM_INITPLR13;
- mfsdram(sdram_reg, sdram_data);
- printf(" SDRAM_INITPLR13 = 0x%08X\n", sdram_data);
- sdram_reg = SDRAM_INITPLR14;
- mfsdram(sdram_reg, sdram_data);
- printf(" SDRAM_INITPLR14 = 0x%08X", sdram_data);
- sdram_reg = SDRAM_INITPLR15;
- mfsdram(sdram_reg, sdram_data);
- printf(" SDRAM_INITPLR15 = 0x%08X\n", sdram_data);
- sdram_reg = SDRAM_RQDC;
- mfsdram(sdram_reg, sdram_data);
- printf(" SDRAM_RQDC = 0x%08X", sdram_data);
- sdram_reg = SDRAM_RFDC;
- mfsdram(sdram_reg, sdram_data);
- printf(" SDRAM_RFDC = 0x%08X\n", sdram_data);
- sdram_reg = SDRAM_RDCC;
- mfsdram(sdram_reg, sdram_data);
- printf(" SDRAM_RDCC = 0x%08X", sdram_data);
- sdram_reg = SDRAM_DLCR;
- mfsdram(sdram_reg, sdram_data);
- printf(" SDRAM_DLCR = 0x%08X\n", sdram_data);
- sdram_reg = SDRAM_CLKTR;
- mfsdram(sdram_reg, sdram_data);
- printf(" SDRAM_CLKTR = 0x%08X", sdram_data);
- sdram_reg = SDRAM_WRDTR;
- mfsdram(sdram_reg, sdram_data);
- printf(" SDRAM_WRDTR = 0x%08X\n", sdram_data);
- sdram_reg = SDRAM_SDTR1;
- mfsdram(sdram_reg, sdram_data);
- printf(" SDRAM_SDTR1 = 0x%08X", sdram_data);
- sdram_reg = SDRAM_SDTR2;
- mfsdram(sdram_reg, sdram_data);
- printf(" SDRAM_SDTR2 = 0x%08X\n", sdram_data);
- sdram_reg = SDRAM_SDTR3;
- mfsdram(sdram_reg, sdram_data);
- printf(" SDRAM_SDTR3 = 0x%08X", sdram_data);
- sdram_reg = SDRAM_MMODE;
- mfsdram(sdram_reg, sdram_data);
- printf(" SDRAM_MMODE = 0x%08X\n", sdram_data);
- sdram_reg = SDRAM_MEMODE;
- mfsdram(sdram_reg, sdram_data);
- printf(" SDRAM_MEMODE = 0x%08X", sdram_data);
- sdram_reg = SDRAM_ECCCR;
- mfsdram(sdram_reg, sdram_data);
- printf(" SDRAM_ECCCR = 0x%08X\n\n", sdram_data);
-
- dcr_data = mfdcr(SDRAM_R0BAS);
- printf(" MQ0_B0BAS = 0x%08X", dcr_data);
- dcr_data = mfdcr(SDRAM_R1BAS);
- printf(" MQ1_B0BAS = 0x%08X\n", dcr_data);
- dcr_data = mfdcr(SDRAM_R2BAS);
- printf(" MQ2_B0BAS = 0x%08X", dcr_data);
- dcr_data = mfdcr(SDRAM_R3BAS);
- printf(" MQ3_B0BAS = 0x%08X\n", dcr_data);
-}
-#else /* !defined(DEBUG) */
-static void ppc440sp_sdram_register_dump(void)
-{
-}
-#endif /* defined(DEBUG) */
-#elif defined(CONFIG_405EX)
+#else /* CONFIG_SPD_EEPROM */
+
/*-----------------------------------------------------------------------------
* Function: initdram
* Description: Configures the PPC405EX(r) DDR1/DDR2 SDRAM memory
@@ -3222,8 +3070,96 @@ phys_size_t initdram(int board_type)
#if defined(CONFIG_DDR_ECC)
ecc_init(CFG_SDRAM_BASE, CFG_MBYTES_SDRAM << 20);
#endif /* defined(CONFIG_DDR_ECC) */
+
+ ppc4xx_ibm_ddr2_register_dump();
#endif /* !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) */
return (CFG_MBYTES_SDRAM << 20);
}
-#endif /* defined(CONFIG_SPD_EEPROM) && defined(CONFIG_440SP) || ... */
+#endif /* CONFIG_SPD_EEPROM */
+
+static inline void ppc4xx_ibm_ddr2_register_dump(void)
+{
+#if defined(DEBUG)
+ printf("\nPPC4xx IBM DDR2 Register Dump:\n");
+
+#if (defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT))
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(R0BAS);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(R1BAS);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(R2BAS);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(R3BAS);
+#endif /* (defined(CONFIG_440SP) || ... */
+#if defined(CONFIG_405EX)
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(BESR);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(BEARL);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(BEARH);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(WMIRQ);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(PLBOPT);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(PUABA);
+#endif /* defined(CONFIG_405EX) */
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(MB0CF);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(MB1CF);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(MB2CF);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(MB3CF);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(MCSTAT);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(MCOPT1);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(MCOPT2);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(MODT0);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(MODT1);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(MODT2);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(MODT3);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(CODT);
+#if (defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT))
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(VVPR);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(OPARS);
+ /*
+ * OPART is only used as a trigger register.
+ *
+ * No data is contained in this register, and reading or writing
+ * to is can cause bad things to happen (hangs). Just skip it and
+ * report "N/A".
+ */
+ printf("%20s = N/A\n", "SDRAM_OPART");
+#endif /* defined(CONFIG_440SP) || ... */
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(RTR);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR0);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR1);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR2);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR3);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR4);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR5);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR6);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR7);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR8);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR9);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR10);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR11);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR12);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR13);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR14);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR15);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(RQDC);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(RFDC);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(RDCC);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(DLCR);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(CLKTR);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(WRDTR);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(SDTR1);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(SDTR2);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(SDTR3);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(MMODE);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(MEMODE);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(ECCCR);
+#if (defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT))
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(CID);
+#endif /* defined(CONFIG_440SP) || ... */
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(RID);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(FCSR);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(RTSR);
+#endif /* defined(DEBUG) */
+}
+
+#endif /* CONFIG_SDRAM_PPC4xx_IBM_DDR2 */
diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c
index 4e863dc911..8a3833513e 100644
--- a/cpu/ppc4xx/4xx_enet.c
+++ b/cpu/ppc4xx/4xx_enet.c
@@ -90,7 +90,6 @@
#include <405_mal.h>
#include <miiphy.h>
#include <malloc.h>
-#include <asm/ppc4xx-intvec.h>
/*
* Only compile for platform with AMCC EMAC ethernet controller and
@@ -122,11 +121,65 @@
* Defines for MAL/EMAC interrupt conditions as reported in the UIC (Universal
* Interrupt Controller).
*-----------------------------------------------------------------------------*/
-#define MAL_UIC_ERR ( UIC_MAL_SERR | UIC_MAL_TXDE | UIC_MAL_RXDE)
-#define MAL_UIC_DEF (UIC_MAL_RXEOB | MAL_UIC_ERR)
-#define EMAC_UIC_DEF UIC_ENET
-#define EMAC_UIC_DEF1 UIC_ENET1
-#define SEL_UIC_DEF(p) (p ? UIC_ENET1 : UIC_ENET )
+#define ETH_IRQ_NUM(dev) (VECNUM_ETH0 + ((dev) * VECNUM_ETH1_OFFS))
+
+#if defined(CONFIG_HAS_ETH3)
+#if !defined(CONFIG_440GX)
+#define UIC_ETHx (UIC_MASK(ETH_IRQ_NUM(0)) || UIC_MASK(ETH_IRQ_NUM(1)) || \
+ UIC_MASK(ETH_IRQ_NUM(2)) || UIC_MASK(ETH_IRQ_NUM(3)))
+#else
+/* Unfortunately 440GX spreads EMAC interrupts on multiple UIC's */
+#define UIC_ETHx (UIC_MASK(ETH_IRQ_NUM(0)) || UIC_MASK(ETH_IRQ_NUM(1)))
+#define UIC_ETHxB (UIC_MASK(ETH_IRQ_NUM(2)) || UIC_MASK(ETH_IRQ_NUM(3)))
+#endif /* !defined(CONFIG_440GX) */
+#elif defined(CONFIG_HAS_ETH2)
+#define UIC_ETHx (UIC_MASK(ETH_IRQ_NUM(0)) || UIC_MASK(ETH_IRQ_NUM(1)) || \
+ UIC_MASK(ETH_IRQ_NUM(2)))
+#elif defined(CONFIG_HAS_ETH1)
+#define UIC_ETHx (UIC_MASK(ETH_IRQ_NUM(0)) || UIC_MASK(ETH_IRQ_NUM(1)))
+#else
+#define UIC_ETHx UIC_MASK(ETH_IRQ_NUM(0))
+#endif
+
+/*
+ * Define a default version for UIC_ETHxB for non 440GX so that we can
+ * use common code for all 4xx variants
+ */
+#if !defined(UIC_ETHxB)
+#define UIC_ETHxB 0
+#endif
+
+#define UIC_MAL_SERR UIC_MASK(VECNUM_MAL_SERR)
+#define UIC_MAL_TXDE UIC_MASK(VECNUM_MAL_TXDE)
+#define UIC_MAL_RXDE UIC_MASK(VECNUM_MAL_RXDE)
+#define UIC_MAL_TXEOB UIC_MASK(VECNUM_MAL_TXEOB)
+#define UIC_MAL_RXEOB UIC_MASK(VECNUM_MAL_RXEOB)
+
+#define MAL_UIC_ERR (UIC_MAL_SERR | UIC_MAL_TXDE | UIC_MAL_RXDE)
+#define MAL_UIC_DEF (UIC_MAL_RXEOB | MAL_UIC_ERR)
+
+/*
+ * We have 3 different interrupt types:
+ * - MAL interrupts indicating successful transfer
+ * - MAL error interrupts indicating MAL related errors
+ * - EMAC interrupts indicating EMAC related errors
+ *
+ * All those interrupts can be on different UIC's, but since
+ * now at least all interrupts from one type are on the same
+ * UIC. Only exception is 440GX where the EMAC interrupts are
+ * spread over two UIC's!
+ */
+#if defined(CONFIG_440GX)
+#define UIC_BASE_MAL UIC1_DCR_BASE
+#define UIC_BASE_MAL_ERR UIC2_DCR_BASE
+#define UIC_BASE_EMAC UIC2_DCR_BASE
+#define UIC_BASE_EMAC_B UIC3_DCR_BASE
+#else
+#define UIC_BASE_MAL (UIC0_DCR_BASE + (UIC_NR(VECNUM_MAL_TXEOB) * 0x10))
+#define UIC_BASE_MAL_ERR (UIC0_DCR_BASE + (UIC_NR(VECNUM_MAL_SERR) * 0x10))
+#define UIC_BASE_EMAC (UIC0_DCR_BASE + (UIC_NR(ETH_IRQ_NUM(0)) * 0x10))
+#define UIC_BASE_EMAC_B (UIC0_DCR_BASE + (UIC_NR(ETH_IRQ_NUM(0)) * 0x10))
+#endif
#undef INFO_4XX_ENET
@@ -166,9 +219,6 @@
/*-----------------------------------------------------------------------------+
* Global variables. TX and RX descriptors and buffers.
*-----------------------------------------------------------------------------*/
-/* IER globals */
-static uint32_t mal_ier;
-
#if !defined(CONFIG_NET_MULTI)
struct eth_device *emac0_dev = NULL;
#endif
@@ -200,12 +250,6 @@ struct eth_device *emac0_dev = NULL;
#define CONFIG_EMAC_NR_START 0
#endif
-#if defined(CONFIG_405EX) || defined(CONFIG_440EPX)
-#define ETH_IRQ_NUM(dev) (VECNUM_ETH0 + ((dev)))
-#else
-#define ETH_IRQ_NUM(dev) (VECNUM_ETH0 + ((dev) * 2))
-#endif
-
#define MAL_RX_DESC_SIZE 2048
#define MAL_TX_DESC_SIZE 2048
#define MAL_ALLOC_SIZE (MAL_TX_DESC_SIZE + MAL_RX_DESC_SIZE)
@@ -465,30 +509,88 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis)
#if defined(CONFIG_405EX)
int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis)
{
- u32 gmiifer = 0;
+ u32 rgmiifer = 0;
/*
- * Right now only 2*RGMII is supported. Please extend when needed.
- * sr - 2007-09-19
+ * The 405EX(r)'s RGMII bridge can operate in one of several
+ * modes, only one of which (2 x RGMII) allows the
+ * simultaneous use of both EMACs on the 405EX.
*/
- switch (1) {
- case 1:
+
+ switch (CONFIG_EMAC_PHY_MODE) {
+
+ case EMAC_PHY_MODE_NONE:
+ /* No ports */
+ rgmiifer |= RGMII_FER_DIS << 0;
+ rgmiifer |= RGMII_FER_DIS << 4;
+ out_be32((void *)RGMII_FER, rgmiifer);
+ bis->bi_phymode[0] = BI_PHYMODE_NONE;
+ bis->bi_phymode[1] = BI_PHYMODE_NONE;
+ break;
+ case EMAC_PHY_MODE_NONE_RGMII:
+ /* 1 x RGMII port on channel 0 */
+ rgmiifer |= RGMII_FER_RGMII << 0;
+ rgmiifer |= RGMII_FER_DIS << 4;
+ out_be32((void *)RGMII_FER, rgmiifer);
+ bis->bi_phymode[0] = BI_PHYMODE_RGMII;
+ bis->bi_phymode[1] = BI_PHYMODE_NONE;
+ break;
+ case EMAC_PHY_MODE_RGMII_NONE:
+ /* 1 x RGMII port on channel 1 */
+ rgmiifer |= RGMII_FER_DIS << 0;
+ rgmiifer |= RGMII_FER_RGMII << 4;
+ out_be32((void *)RGMII_FER, rgmiifer);
+ bis->bi_phymode[0] = BI_PHYMODE_NONE;
+ bis->bi_phymode[1] = BI_PHYMODE_RGMII;
+ break;
+ case EMAC_PHY_MODE_RGMII_RGMII:
/* 2 x RGMII ports */
- out_be32((void *)RGMII_FER, 0x00000055);
+ rgmiifer |= RGMII_FER_RGMII << 0;
+ rgmiifer |= RGMII_FER_RGMII << 4;
+ out_be32((void *)RGMII_FER, rgmiifer);
bis->bi_phymode[0] = BI_PHYMODE_RGMII;
bis->bi_phymode[1] = BI_PHYMODE_RGMII;
break;
- case 2:
- /* 2 x SMII ports */
+ case EMAC_PHY_MODE_NONE_GMII:
+ /* 1 x GMII port on channel 0 */
+ rgmiifer |= RGMII_FER_GMII << 0;
+ rgmiifer |= RGMII_FER_DIS << 4;
+ out_be32((void *)RGMII_FER, rgmiifer);
+ bis->bi_phymode[0] = BI_PHYMODE_GMII;
+ bis->bi_phymode[1] = BI_PHYMODE_NONE;
+ break;
+ case EMAC_PHY_MODE_NONE_MII:
+ /* 1 x MII port on channel 0 */
+ rgmiifer |= RGMII_FER_MII << 0;
+ rgmiifer |= RGMII_FER_DIS << 4;
+ out_be32((void *)RGMII_FER, rgmiifer);
+ bis->bi_phymode[0] = BI_PHYMODE_MII;
+ bis->bi_phymode[1] = BI_PHYMODE_NONE;
+ break;
+ case EMAC_PHY_MODE_GMII_NONE:
+ /* 1 x GMII port on channel 1 */
+ rgmiifer |= RGMII_FER_DIS << 0;
+ rgmiifer |= RGMII_FER_GMII << 4;
+ out_be32((void *)RGMII_FER, rgmiifer);
+ bis->bi_phymode[0] = BI_PHYMODE_NONE;
+ bis->bi_phymode[1] = BI_PHYMODE_GMII;
+ break;
+ case EMAC_PHY_MODE_MII_NONE:
+ /* 1 x MII port on channel 1 */
+ rgmiifer |= RGMII_FER_DIS << 0;
+ rgmiifer |= RGMII_FER_MII << 4;
+ out_be32((void *)RGMII_FER, rgmiifer);
+ bis->bi_phymode[0] = BI_PHYMODE_NONE;
+ bis->bi_phymode[1] = BI_PHYMODE_MII;
break;
default:
break;
}
/* Ensure we setup mdio for this devnum and ONLY this devnum */
- gmiifer = in_be32((void *)RGMII_FER);
- gmiifer |= (1 << (19-devnum));
- out_be32((void *)RGMII_FER, gmiifer);
+ rgmiifer = in_be32((void *)RGMII_FER);
+ rgmiifer |= (1 << (19-devnum));
+ out_be32((void *)RGMII_FER, rgmiifer);
return ((int)0x0);
}
@@ -1377,59 +1479,17 @@ static int ppc_4xx_eth_send (struct eth_device *dev, volatile void *ptr,
}
}
-
-#if defined (CONFIG_440) || defined(CONFIG_405EX)
-
-#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
-/*
- * Hack: On 440SP all enet irq sources are located on UIC1
- * Needs some cleanup. --sr
- */
-#define UIC0MSR uic1msr
-#define UIC0SR uic1sr
-#define UIC1MSR uic1msr
-#define UIC1SR uic1sr
-#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
-/*
- * Hack: On 460EX/GT all enet irq sources are located on UIC2
- * Needs some cleanup. --ag
- */
-#define UIC0MSR uic2msr
-#define UIC0SR uic2sr
-#define UIC1MSR uic2msr
-#define UIC1SR uic2sr
-#else
-#define UIC0MSR uic0msr
-#define UIC0SR uic0sr
-#define UIC1MSR uic1msr
-#define UIC1SR uic1sr
-#endif
-
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_405EX)
-#define UICMSR_ETHX uic0msr
-#define UICSR_ETHX uic0sr
-#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define UICMSR_ETHX uic2msr
-#define UICSR_ETHX uic2sr
-#else
-#define UICMSR_ETHX uic1msr
-#define UICSR_ETHX uic1sr
-#endif
-
int enetInt (struct eth_device *dev)
{
int serviced;
int rc = -1; /* default to not us */
- unsigned long mal_isr;
- unsigned long emac_isr = 0;
- unsigned long mal_rx_eob;
- unsigned long my_uic0msr, my_uic1msr;
- unsigned long my_uicmsr_ethx;
-
-#if defined(CONFIG_440GX)
- unsigned long my_uic2msr;
-#endif
+ u32 mal_isr;
+ u32 emac_isr = 0;
+ u32 mal_eob;
+ u32 uic_mal;
+ u32 uic_mal_err;
+ u32 uic_emac;
+ u32 uic_emac_b;
EMAC_4XX_HW_PST hw_p;
/*
@@ -1448,256 +1508,79 @@ int enetInt (struct eth_device *dev)
do {
serviced = 0;
- my_uic0msr = mfdcr (UIC0MSR);
- my_uic1msr = mfdcr (UIC1MSR);
-#if defined(CONFIG_440GX)
- my_uic2msr = mfdcr (uic2msr);
-#endif
- my_uicmsr_ethx = mfdcr (UICMSR_ETHX);
+ uic_mal = mfdcr(UIC_BASE_MAL + UIC_MSR);
+ uic_mal_err = mfdcr(UIC_BASE_MAL_ERR + UIC_MSR);
+ uic_emac = mfdcr(UIC_BASE_EMAC + UIC_MSR);
+ uic_emac_b = mfdcr(UIC_BASE_EMAC_B + UIC_MSR);
- if (!(my_uic0msr & (UIC_MRE | UIC_MTE))
- && !(my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))
- && !(my_uicmsr_ethx & (UIC_ETH0 | UIC_ETH1))) {
- /* not for us */
- return (rc);
- }
-#if defined (CONFIG_440GX)
- if (!(my_uic0msr & (UIC_MRE | UIC_MTE))
- && !(my_uic2msr & (UIC_ETH2 | UIC_ETH3))) {
+ if (!(uic_mal & (UIC_MAL_RXEOB | UIC_MAL_TXEOB))
+ && !(uic_mal_err & (UIC_MAL_SERR | UIC_MAL_TXDE | UIC_MAL_RXDE))
+ && !(uic_emac & UIC_ETHx) && !(uic_emac_b & UIC_ETHxB)) {
/* not for us */
return (rc);
}
-#endif
+
/* get and clear controller status interrupts */
- /* look at Mal and EMAC interrupts */
- if ((my_uic0msr & (UIC_MRE | UIC_MTE))
- || (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) {
- /* we have a MAL interrupt */
- mal_isr = mfdcr (malesr);
- /* look for mal error */
- if (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE)) {
- mal_err (dev, mal_isr, my_uic1msr, MAL_UIC_DEF, MAL_UIC_ERR);
- serviced = 1;
- rc = 0;
- }
- }
+ /* look at MAL and EMAC error interrupts */
+ if (uic_mal_err & (UIC_MAL_SERR | UIC_MAL_TXDE | UIC_MAL_RXDE)) {
+ /* we have a MAL error interrupt */
+ mal_isr = mfdcr(malesr);
+ mal_err(dev, mal_isr, uic_mal_err,
+ MAL_UIC_DEF, MAL_UIC_ERR);
- /* port by port dispatch of emac interrupts */
- if (hw_p->devnum == 0) {
- if (UIC_ETH0 & my_uicmsr_ethx) { /* look for EMAC errors */
- emac_isr = in_be32((void *)EMAC_ISR + hw_p->hw_addr);
- if ((hw_p->emac_ier & emac_isr) != 0) {
- emac_err (dev, emac_isr);
- serviced = 1;
- rc = 0;
- }
- }
- if ((hw_p->emac_ier & emac_isr)
- || (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) {
- mtdcr (UIC0SR, UIC_MRE | UIC_MTE); /* Clear */
- mtdcr (UIC1SR, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
- mtdcr (UICSR_ETHX, UIC_ETH0); /* Clear */
- return (rc); /* we had errors so get out */
- }
- }
+ /* clear MAL error interrupt status bits */
+ mtdcr(UIC_BASE_MAL_ERR + UIC_SR,
+ UIC_MAL_SERR | UIC_MAL_TXDE | UIC_MAL_RXDE);
-#if !defined(CONFIG_440SP)
- if (hw_p->devnum == 1) {
- if (UIC_ETH1 & my_uicmsr_ethx) { /* look for EMAC errors */
- emac_isr = in_be32((void *)EMAC_ISR + hw_p->hw_addr);
- if ((hw_p->emac_ier & emac_isr) != 0) {
- emac_err (dev, emac_isr);
- serviced = 1;
- rc = 0;
- }
- }
- if ((hw_p->emac_ier & emac_isr)
- || (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) {
- mtdcr (UIC0SR, UIC_MRE | UIC_MTE); /* Clear */
- mtdcr (UIC1SR, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
- mtdcr (UICSR_ETHX, UIC_ETH1); /* Clear */
- return (rc); /* we had errors so get out */
- }
- }
-#if defined (CONFIG_440GX)
- if (hw_p->devnum == 2) {
- if (UIC_ETH2 & my_uic2msr) { /* look for EMAC errors */
- emac_isr = in_be32((void *)EMAC_ISR + hw_p->hw_addr);
- if ((hw_p->emac_ier & emac_isr) != 0) {
- emac_err (dev, emac_isr);
- serviced = 1;
- rc = 0;
- }
- }
- if ((hw_p->emac_ier & emac_isr)
- || (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) {
- mtdcr (UIC0SR, UIC_MRE | UIC_MTE); /* Clear */
- mtdcr (UIC1SR, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
- mtdcr (uic2sr, UIC_ETH2);
- return (rc); /* we had errors so get out */
- }
+ return -1;
}
- if (hw_p->devnum == 3) {
- if (UIC_ETH3 & my_uic2msr) { /* look for EMAC errors */
- emac_isr = in_be32((void *)EMAC_ISR + hw_p->hw_addr);
- if ((hw_p->emac_ier & emac_isr) != 0) {
- emac_err (dev, emac_isr);
- serviced = 1;
- rc = 0;
- }
- }
- if ((hw_p->emac_ier & emac_isr)
- || (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) {
- mtdcr (UIC0SR, UIC_MRE | UIC_MTE); /* Clear */
- mtdcr (UIC1SR, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
- mtdcr (uic2sr, UIC_ETH3);
- return (rc); /* we had errors so get out */
- }
- }
-#endif /* CONFIG_440GX */
-#endif /* !CONFIG_440SP */
+ /* look for EMAC errors */
+ if ((uic_emac & UIC_ETHx) || (uic_emac_b & UIC_ETHxB)) {
+ emac_isr = in_be32((void *)EMAC_ISR + hw_p->hw_addr);
+ emac_err(dev, emac_isr);
- /* handle MAX TX EOB interrupt from a tx */
- if (my_uic0msr & UIC_MTE) {
- mal_rx_eob = mfdcr (maltxeobisr);
- mtdcr (maltxeobisr, mal_rx_eob);
- mtdcr (UIC0SR, UIC_MTE);
- }
- /* handle MAL RX EOB interupt from a receive */
- /* check for EOB on valid channels */
- if (my_uic0msr & UIC_MRE) {
- mal_rx_eob = mfdcr (malrxeobisr);
- if ((mal_rx_eob &
- (0x80000000 >> (hw_p->devnum * MAL_RX_CHAN_MUL)))
- != 0) { /* call emac routine for channel x */
- /* clear EOB
- mtdcr(malrxeobisr, mal_rx_eob); */
- enet_rcv (dev, emac_isr);
- /* indicate that we serviced an interrupt */
- serviced = 1;
- rc = 0;
- }
- }
+ /* clear EMAC error interrupt status bits */
+ mtdcr(UIC_BASE_EMAC + UIC_SR, UIC_ETHx);
+ mtdcr(UIC_BASE_EMAC_B + UIC_SR, UIC_ETHxB);
- mtdcr (UIC0SR, UIC_MRE); /* Clear */
- mtdcr (UIC1SR, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
- switch (hw_p->devnum) {
- case 0:
- mtdcr (UICSR_ETHX, UIC_ETH0);
- break;
- case 1:
- mtdcr (UICSR_ETHX, UIC_ETH1);
- break;
-#if defined (CONFIG_440GX)
- case 2:
- mtdcr (uic2sr, UIC_ETH2);
- break;
- case 3:
- mtdcr (uic2sr, UIC_ETH3);
- break;
-#endif /* CONFIG_440GX */
- default:
- break;
+ return -1;
}
- } while (serviced);
-
- return (rc);
-}
-
-#else /* CONFIG_440 */
-
-int enetInt (struct eth_device *dev)
-{
- int serviced;
- int rc = -1; /* default to not us */
- unsigned long mal_isr;
- unsigned long emac_isr = 0;
- unsigned long mal_rx_eob;
- unsigned long my_uicmsr;
-
- EMAC_4XX_HW_PST hw_p;
-
- /*
- * Because the mal is generic, we need to get the current
- * eth device
- */
-#if defined(CONFIG_NET_MULTI)
- dev = eth_get_dev();
-#else
- dev = emac0_dev;
-#endif
-
- hw_p = dev->priv;
-
- /* enter loop that stays in interrupt code until nothing to service */
- do {
- serviced = 0;
- my_uicmsr = mfdcr (uicmsr);
-
- if ((my_uicmsr & (MAL_UIC_DEF | EMAC_UIC_DEF)) == 0) { /* not for us */
- return (rc);
- }
- /* get and clear controller status interrupts */
- /* look at Mal and EMAC interrupts */
- if ((MAL_UIC_DEF & my_uicmsr) != 0) { /* we have a MAL interrupt */
- mal_isr = mfdcr (malesr);
- /* look for mal error */
- if ((my_uicmsr & MAL_UIC_ERR) != 0) {
- mal_err (dev, mal_isr, my_uicmsr, MAL_UIC_DEF, MAL_UIC_ERR);
- serviced = 1;
- rc = 0;
- }
+ /* handle MAX TX EOB interrupt from a tx */
+ if (uic_mal & UIC_MAL_TXEOB) {
+ /* clear MAL interrupt status bits */
+ mal_eob = mfdcr(maltxeobisr);
+ mtdcr(maltxeobisr, mal_eob);
+ mtdcr(UIC_BASE_MAL + UIC_SR, UIC_MAL_TXEOB);
+
+ /* indicate that we serviced an interrupt */
+ serviced = 1;
+ rc = 0;
}
- /* port by port dispatch of emac interrupts */
+ /* handle MAL RX EOB interupt from a receive */
+ /* check for EOB on valid channels */
+ if (uic_mal & UIC_MAL_RXEOB) {
+ mal_eob = mfdcr(malrxeobisr);
+ if (mal_eob &
+ (0x80000000 >> (hw_p->devnum * MAL_RX_CHAN_MUL))) {
+ /* push packet to upper layer */
+ enet_rcv(dev, emac_isr);
- if ((SEL_UIC_DEF(hw_p->devnum) & my_uicmsr) != 0) { /* look for EMAC errors */
- emac_isr = in_be32((void *)EMAC_ISR + hw_p->hw_addr);
- if ((hw_p->emac_ier & emac_isr) != 0) {
- emac_err (dev, emac_isr);
- serviced = 1;
- rc = 0;
- }
- }
- if (((hw_p->emac_ier & emac_isr) != 0) || ((MAL_UIC_ERR & my_uicmsr) != 0)) {
- mtdcr (uicsr, MAL_UIC_DEF | SEL_UIC_DEF(hw_p->devnum)); /* Clear */
- return (rc); /* we had errors so get out */
- }
+ /* clear MAL interrupt status bits */
+ mtdcr(UIC_BASE_MAL + UIC_SR, UIC_MAL_RXEOB);
- /* handle MAX TX EOB interrupt from a tx */
- if (my_uicmsr & UIC_MAL_TXEOB) {
- mal_rx_eob = mfdcr (maltxeobisr);
- mtdcr (maltxeobisr, mal_rx_eob);
- mtdcr (uicsr, UIC_MAL_TXEOB);
- }
- /* handle MAL RX EOB interupt from a receive */
- /* check for EOB on valid channels */
- if (my_uicmsr & UIC_MAL_RXEOB)
- {
- mal_rx_eob = mfdcr (malrxeobisr);
- if ((mal_rx_eob & (0x80000000 >> hw_p->devnum)) != 0) { /* call emac routine for channel x */
- /* clear EOB
- mtdcr(malrxeobisr, mal_rx_eob); */
- enet_rcv (dev, emac_isr);
/* indicate that we serviced an interrupt */
serviced = 1;
rc = 0;
}
}
- mtdcr (uicsr, MAL_UIC_DEF|EMAC_UIC_DEF|EMAC_UIC_DEF1); /* Clear */
-#if defined(CONFIG_405EZ)
- mtsdr (sdricintstat, SDR_ICRX_STAT | SDR_ICTX0_STAT | SDR_ICTX1_STAT);
-#endif /* defined(CONFIG_405EZ) */
- }
- while (serviced);
+ } while (serviced);
return (rc);
}
-#endif /* CONFIG_440 */
-
/*-----------------------------------------------------------------------------+
* MAL Error Routine
*-----------------------------------------------------------------------------*/
@@ -1883,6 +1766,7 @@ int ppc_4xx_eth_initialize (bd_t * bis)
EMAC_4XX_HW_PST hw = NULL;
u8 ethaddr[4 + CONFIG_EMAC_NR_START][6];
u32 hw_addr[4];
+ u32 mal_ier;
#if defined(CONFIG_440GX)
unsigned long pfc1;
@@ -2020,19 +1904,19 @@ int ppc_4xx_eth_initialize (bd_t * bis)
mtdcr (malier, mal_ier);
/* install MAL interrupt handler */
- irq_install_handler (VECNUM_MS,
+ irq_install_handler (VECNUM_MAL_SERR,
(interrupt_handler_t *) enetInt,
dev);
- irq_install_handler (VECNUM_MTE,
+ irq_install_handler (VECNUM_MAL_TXEOB,
(interrupt_handler_t *) enetInt,
dev);
- irq_install_handler (VECNUM_MRE,
+ irq_install_handler (VECNUM_MAL_RXEOB,
(interrupt_handler_t *) enetInt,
dev);
- irq_install_handler (VECNUM_TXDE,
+ irq_install_handler (VECNUM_MAL_TXDE,
(interrupt_handler_t *) enetInt,
dev);
- irq_install_handler (VECNUM_RXDE,
+ irq_install_handler (VECNUM_MAL_RXDE,
(interrupt_handler_t *) enetInt,
dev);
virgin = 1;
diff --git a/cpu/ppc4xx/4xx_uart.c b/cpu/ppc4xx/4xx_uart.c
index a7587d4351..766e586808 100644
--- a/cpu/ppc4xx/4xx_uart.c
+++ b/cpu/ppc4xx/4xx_uart.c
@@ -46,7 +46,7 @@
#include <asm/processor.h>
#include <asm/io.h>
#include <watchdog.h>
-#include <asm/ppc4xx-intvec.h>
+#include <ppc4xx.h>
#ifdef CONFIG_SERIAL_MULTI
#include <serial.h>
diff --git a/cpu/ppc4xx/Makefile b/cpu/ppc4xx/Makefile
index 800bb41d01..c773400a5d 100644
--- a/cpu/ppc4xx/Makefile
+++ b/cpu/ppc4xx/Makefile
@@ -35,10 +35,8 @@ SOBJS += kgdb.o
COBJS := 40x_spd_sdram.o
COBJS += 44x_spd_ddr.o
COBJS += 44x_spd_ddr2.o
-COBJS += 4xx_enet.o
COBJS += 4xx_pci.o
COBJS += 4xx_pcie.o
-COBJS += 4xx_uart.o
COBJS += bedbug_405.o
COBJS += commproc.o
COBJS += cpu.o
@@ -47,11 +45,9 @@ COBJS += denali_data_eye.o
COBJS += denali_spd_ddr2.o
COBJS += ecc.o
COBJS += fdt.o
-COBJS += gpio.o
COBJS += i2c.o
COBJS += interrupts.o
COBJS += iop480_uart.o
-COBJS += miiphy.o
COBJS += ndfc.o
COBJS += sdram.o
COBJS += speed.o
@@ -60,6 +56,15 @@ COBJS += traps.o
COBJS += usb.o
COBJS += usb_ohci.o
COBJS += usbdev.o
+ifndef CONFIG_XILINX_440
+COBJS += 4xx_enet.o
+COBJS += 4xx_uart.o
+COBJS += gpio.o
+COBJS += miiphy.o
+COBJS += uic.o
+else
+COBJS += xilinx_irq.o
+endif
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c
index 39f439df98..bc9335a05e 100644
--- a/cpu/ppc4xx/cpu.c
+++ b/cpu/ppc4xx/cpu.c
@@ -184,6 +184,19 @@ static char *bootstrap_str[] = {
static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'G', 'F', 'H' };
#endif
+#if defined(CONFIG_460SX)
+#define SDR0_PINSTP_SHIFT 29
+static char *bootstrap_str[] = {
+ "EBC (8 bits)",
+ "EBC (16 bits)",
+ "EBC (32 bits)",
+ "NAND (8 bits)",
+ "I2C (Addr 0x54)", /* A8 */
+ "I2C (Addr 0x52)", /* A4 */
+};
+static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'G' };
+#endif
+
#if defined(CONFIG_405EZ)
#define SDR0_PINSTP_SHIFT 28
static char *bootstrap_str[] = {
@@ -266,7 +279,11 @@ int checkcpu (void)
get_sys_info(&sys_info);
+#if defined(CONFIG_XILINX_440)
+ puts("IBM PowerPC 4");
+#else
puts("AMCC PowerPC 4");
+#endif
#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
@@ -509,6 +526,30 @@ int checkcpu (void)
strcpy(addstr, "Security/Kasumi support");
break;
+ case PVR_460SX_RA:
+ puts("SX Rev. A");
+ strcpy(addstr, "Security support");
+ break;
+
+ case PVR_460SX_RA_V1:
+ puts("SX Rev. A");
+ strcpy(addstr, "No Security support");
+ break;
+
+ case PVR_460GX_RA:
+ puts("GX Rev. A");
+ strcpy(addstr, "Security support");
+ break;
+
+ case PVR_460GX_RA_V1:
+ puts("GX Rev. A");
+ strcpy(addstr, "No Security support");
+ break;
+
+ case PVR_VIRTEX5:
+ puts("x5 VIRTEX5");
+ break;
+
default:
printf (" UNKNOWN (PVR=%08x)", pvr);
break;
diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c
index ac64279051..e2d0402781 100644
--- a/cpu/ppc4xx/cpu_init.c
+++ b/cpu/ppc4xx/cpu_init.c
@@ -138,9 +138,10 @@ void reconfigure_pll(u32 new_cpu_freq)
void
cpu_init_f (void)
{
-#if defined(CONFIG_WATCHDOG) || defined(CONFIG_460EX)
+#if defined(CONFIG_WATCHDOG) || defined(CONFIG_440GX) || defined(CONFIG_460EX)
u32 val;
#endif
+
reconfigure_pll(CFG_PLL_RECONFIG);
#if (defined(CONFIG_405EP) || defined (CONFIG_405EX)) && !defined(CFG_4xx_GPIO_TABLE)
@@ -273,6 +274,18 @@ cpu_init_f (void)
reset_4xx_watchdog();
#endif /* CONFIG_WATCHDOG */
+#if defined(CONFIG_440GX)
+ /* Take the GX out of compatibility mode
+ * Travis Sawyer, 9 Mar 2004
+ * NOTE: 440gx user manual inconsistency here
+ * Compatibility mode and Ethernet Clock select are not
+ * correct in the manual
+ */
+ mfsdr(sdr_mfr, val);
+ val &= ~0x10000000;
+ mtsdr(sdr_mfr,val);
+#endif /* CONFIG_440GX */
+
#if defined(CONFIG_460EX)
/*
* Set SDR0_AHB_CFG[A2P_INCR4] (bit 24) and
diff --git a/cpu/ppc4xx/interrupts.c b/cpu/ppc4xx/interrupts.c
index 8620e2b484..494bd8c9ef 100644
--- a/cpu/ppc4xx/interrupts.c
+++ b/cpu/ppc4xx/interrupts.c
@@ -8,6 +8,10 @@
* (C) Copyright 2003 (440GX port)
* Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
*
+ * (C) Copyright 2008 (PPC440X05 port for Virtex 5 FX)
+ * Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * Work supported by Qtechnology (htpp://qtec.com)
+ *
* See file CREDITS for list of people who contributed to this
* project.
*
@@ -31,31 +35,14 @@
#include <watchdog.h>
#include <command.h>
#include <asm/processor.h>
+#include <asm/interrupt.h>
#include <ppc4xx.h>
#include <ppc_asm.tmpl>
#include <commproc.h>
-#include <asm/ppc4xx-intvec.h>
DECLARE_GLOBAL_DATA_PTR;
/*
- * Define the number of UIC's
- */
-#if defined(CONFIG_440SPE) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define UIC_MAX 4
-#elif defined(CONFIG_440GX) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_405EX)
-#define UIC_MAX 3
-#elif defined(CONFIG_440GP) || defined(CONFIG_440SP) || \
- defined(CONFIG_440EP) || defined(CONFIG_440GR)
-#define UIC_MAX 2
-#else
-#define UIC_MAX 1
-#endif
-
-/*
* CPM interrupt vector functions.
*/
struct irq_action {
@@ -63,15 +50,7 @@ struct irq_action {
void *arg;
int count;
};
-
-static struct irq_action irq_vecs[UIC_MAX * 32];
-
-u32 get_dcr(u16);
-void set_dcr(u16, u32);
-
-#if (UIC_MAX > 1) && !defined(CONFIG_440GX)
-static void uic_cascade_interrupt(void *para);
-#endif
+static struct irq_action irq_vecs[IRQ_MAX];
#if defined(CONFIG_440)
@@ -112,7 +91,7 @@ int interrupt_init_cpu (unsigned *decrementer_count)
/*
* Mark all irqs as free
*/
- for (vec = 0; vec < (UIC_MAX * 32); vec++) {
+ for (vec = 0; vec < IRQ_MAX; vec++) {
irq_vecs[vec].handler = NULL;
irq_vecs[vec].arg = NULL;
irq_vecs[vec].count = 0;
@@ -156,160 +135,38 @@ int interrupt_init_cpu (unsigned *decrementer_count)
*/
set_evpr(0x00000000);
-#if !defined(CONFIG_440GX)
-#if (UIC_MAX > 1)
- /* Install the UIC1 handlers */
- irq_install_handler(VECNUM_UIC1NC, uic_cascade_interrupt, 0);
- irq_install_handler(VECNUM_UIC1C, uic_cascade_interrupt, 0);
-#endif
-#if (UIC_MAX > 2)
- irq_install_handler(VECNUM_UIC2NC, uic_cascade_interrupt, 0);
- irq_install_handler(VECNUM_UIC2C, uic_cascade_interrupt, 0);
-#endif
-#if (UIC_MAX > 3)
- irq_install_handler(VECNUM_UIC3NC, uic_cascade_interrupt, 0);
- irq_install_handler(VECNUM_UIC3C, uic_cascade_interrupt, 0);
-#endif
-#else /* !defined(CONFIG_440GX) */
- /* Take the GX out of compatibility mode
- * Travis Sawyer, 9 Mar 2004
- * NOTE: 440gx user manual inconsistency here
- * Compatibility mode and Ethernet Clock select are not
- * correct in the manual
+ /*
+ * Call uic or xilinx_irq pic_enable
*/
- mfsdr(sdr_mfr, val);
- val &= ~0x10000000;
- mtsdr(sdr_mfr,val);
-
- /* Enable UIC interrupts via UIC Base Enable Register */
- mtdcr(uicb0sr, UICB0_ALL);
- mtdcr(uicb0er, 0x54000000);
- /* None are critical */
- mtdcr(uicb0cr, 0);
-#endif /* !defined(CONFIG_440GX) */
+ pic_enable();
return (0);
}
-/* Handler for UIC interrupt */
-static void uic_interrupt(u32 uic_base, int vec_base)
+void timer_interrupt_cpu(struct pt_regs *regs)
{
- u32 uic_msr;
- u32 msr_shift;
- int vec;
-
- /*
- * Read masked interrupt status register to determine interrupt source
- */
- uic_msr = get_dcr(uic_base + UIC_MSR);
- msr_shift = uic_msr;
- vec = vec_base;
-
- while (msr_shift != 0) {
- if (msr_shift & 0x80000000) {
- /*
- * Increment irq counter (for debug purpose only)
- */
- irq_vecs[vec].count++;
-
- if (irq_vecs[vec].handler != NULL) {
- /* call isr */
- (*irq_vecs[vec].handler)(irq_vecs[vec].arg);
- } else {
- set_dcr(uic_base + UIC_ER,
- get_dcr(uic_base + UIC_ER) &
- ~(0x80000000 >> (vec & 0x1f)));
- printf("Masking bogus interrupt vector %d"
- " (UIC_BASE=0x%x)\n", vec, uic_base);
- }
-
- /*
- * After servicing the interrupt, we have to remove the
- * status indicator
- */
- set_dcr(uic_base + UIC_SR, (0x80000000 >> (vec & 0x1f)));
- }
-
- /*
- * Shift msr to next position and increment vector
- */
- msr_shift <<= 1;
- vec++;
- }
+ /* nothing to do here */
+ return;
}
-#if (UIC_MAX > 1) && !defined(CONFIG_440GX)
-static void uic_cascade_interrupt(void *para)
+void interrupt_run_handler(int vec)
{
- external_interrupt(para);
-}
-#endif
-
-#if defined(CONFIG_440)
-#if defined(CONFIG_440GX)
-/* 440GX uses base uic register */
-#define UIC_BMSR uicb0msr
-#define UIC_BSR uicb0sr
-#else
-#define UIC_BMSR uic0msr
-#define UIC_BSR uic0sr
-#endif
-#else /* CONFIG_440 */
-#define UIC_BMSR uicmsr
-#define UIC_BSR uicsr
-#endif /* CONFIG_440 */
-
-/*
- * Handle external interrupts
- */
-void external_interrupt(struct pt_regs *regs)
-{
- u32 uic_msr;
-
- /*
- * Read masked interrupt status register to determine interrupt source
- */
- uic_msr = mfdcr(UIC_BMSR);
-
-#if (UIC_MAX > 1)
- if ((UICB0_UIC1CI & uic_msr) || (UICB0_UIC1NCI & uic_msr))
- uic_interrupt(UIC1_DCR_BASE, 32);
-#endif
-
-#if (UIC_MAX > 2)
- if ((UICB0_UIC2CI & uic_msr) || (UICB0_UIC2NCI & uic_msr))
- uic_interrupt(UIC2_DCR_BASE, 64);
-#endif
-
-#if (UIC_MAX > 3)
- if ((UICB0_UIC3CI & uic_msr) || (UICB0_UIC3NCI & uic_msr))
- uic_interrupt(UIC3_DCR_BASE, 96);
-#endif
-
-#if defined(CONFIG_440)
-#if !defined(CONFIG_440GX)
- if (uic_msr & ~(UICB0_ALL))
- uic_interrupt(UIC0_DCR_BASE, 0);
-#else
- if ((UICB0_UIC0CI & uic_msr) || (UICB0_UIC0NCI & uic_msr))
- uic_interrupt(UIC0_DCR_BASE, 0);
-#endif
-#else /* CONFIG_440 */
- uic_interrupt(UIC0_DCR_BASE, 0);
-#endif /* CONFIG_440 */
-
- mtdcr(UIC_BSR, uic_msr);
+ irq_vecs[vec].count++;
+
+ if (irq_vecs[vec].handler != NULL) {
+ /* call isr */
+ (*irq_vecs[vec].handler) (irq_vecs[vec].arg);
+ } else {
+ pic_irq_disable(vec);
+ printf("Masking bogus interrupt vector %d\n", vec);
+ }
+ pic_irq_ack(vec);
return;
}
-/*
- * Install and free a interrupt handler.
- */
void irq_install_handler(int vec, interrupt_handler_t * handler, void *arg)
{
- int i;
-
/*
* Print warning when replacing with a different irq vector
*/
@@ -320,55 +177,19 @@ void irq_install_handler(int vec, interrupt_handler_t * handler, void *arg)
irq_vecs[vec].handler = handler;
irq_vecs[vec].arg = arg;
- i = vec & 0x1f;
- if ((vec >= 0) && (vec < 32))
- mtdcr(uicer, mfdcr(uicer) | (0x80000000 >> i));
-#if (UIC_MAX > 1)
- else if ((vec >= 32) && (vec < 64))
- mtdcr(uic1er, mfdcr(uic1er) | (0x80000000 >> i));
-#endif
-#if (UIC_MAX > 2)
- else if ((vec >= 64) && (vec < 96))
- mtdcr(uic2er, mfdcr(uic2er) | (0x80000000 >> i));
-#endif
-#if (UIC_MAX > 3)
- else if (vec >= 96)
- mtdcr(uic3er, mfdcr(uic3er) | (0x80000000 >> i));
-#endif
-
- debug("Install interrupt for vector %d ==> %p\n", vec, handler);
+ pic_irq_enable(vec);
+ return;
}
-void irq_free_handler (int vec)
+void irq_free_handler(int vec)
{
- int i;
-
debug("Free interrupt for vector %d ==> %p\n",
vec, irq_vecs[vec].handler);
- i = vec & 0x1f;
- if ((vec >= 0) && (vec < 32))
- mtdcr(uicer, mfdcr(uicer) & ~(0x80000000 >> i));
-#if (UIC_MAX > 1)
- else if ((vec >= 32) && (vec < 64))
- mtdcr(uic1er, mfdcr(uic1er) & ~(0x80000000 >> i));
-#endif
-#if (UIC_MAX > 2)
- else if ((vec >= 64) && (vec < 96))
- mtdcr(uic2er, mfdcr(uic2er) & ~(0x80000000 >> i));
-#endif
-#if (UIC_MAX > 3)
- else if (vec >= 96)
- mtdcr(uic3er, mfdcr(uic3er) & ~(0x80000000 >> i));
-#endif
+ pic_irq_disable(vec);
irq_vecs[vec].handler = NULL;
irq_vecs[vec].arg = NULL;
-}
-
-void timer_interrupt_cpu (struct pt_regs *regs)
-{
- /* nothing to do here */
return;
}
@@ -380,7 +201,7 @@ int do_irqinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
printf ("Interrupt-Information:\n");
printf ("Nr Routine Arg Count\n");
- for (vec = 0; vec < (UIC_MAX * 32); vec++) {
+ for (vec = 0; vec < IRQ_MAX; vec++) {
if (irq_vecs[vec].handler != NULL) {
printf ("%02d %08lx %08lx %d\n",
vec,
diff --git a/cpu/ppc4xx/iop480_uart.c b/cpu/ppc4xx/iop480_uart.c
index 3af0767c55..0e3423f7ab 100644
--- a/cpu/ppc4xx/iop480_uart.c
+++ b/cpu/ppc4xx/iop480_uart.c
@@ -26,7 +26,6 @@
#include <asm/processor.h>
#include <asm/io.h>
#include <watchdog.h>
-#include <asm/ppc4xx-intvec.h>
#ifdef CONFIG_SERIAL_MULTI
#include <serial.h>
diff --git a/cpu/ppc4xx/speed.c b/cpu/ppc4xx/speed.c
index 34bd7214e7..d21bd82dc6 100644
--- a/cpu/ppc4xx/speed.c
+++ b/cpu/ppc4xx/speed.c
@@ -205,7 +205,8 @@ ulong get_PCI_freq (void)
#elif defined(CONFIG_440)
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
+ defined(CONFIG_460SX)
static u8 pll_fwdv_multi_bits[] = {
/* values for: 1 - 16 */
0x00, 0x01, 0x0f, 0x04, 0x09, 0x0a, 0x0d, 0x0e, 0x03, 0x0c,
@@ -415,7 +416,8 @@ ulong get_PCI_freq (void)
return sys_info.freqPCI;
}
-#elif !defined(CONFIG_440GX) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE)
+#elif !defined(CONFIG_440GX) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) \
+ && !defined(CONFIG_XILINX_440)
void get_sys_info (sys_info_t * sysInfo)
{
unsigned long strp0;
@@ -448,6 +450,8 @@ void get_sys_info (sys_info_t * sysInfo)
sysInfo->freqUART = sysInfo->freqPLB;
}
#else
+
+#if !defined(CONFIG_XILINX_440)
void get_sys_info (sys_info_t * sysInfo)
{
unsigned long strp0;
@@ -534,6 +538,7 @@ void get_sys_info (sys_info_t * sysInfo)
}
#endif
+#endif /* CONFIG_XILINX_440 */
#if defined(CONFIG_YUCCA)
unsigned long determine_sysper(void)
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index 426bf3c6f9..97411bdb9d 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -677,7 +677,8 @@ _start:
/* not all PPC's have internal SRAM usable as L2-cache */
#if defined(CONFIG_440GX) || \
defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT)
+ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
+ defined(CONFIG_460SX)
mtdcr l2_cache_cfg,r0 /* Ensure L2 Cache is off */
#endif
@@ -720,6 +721,19 @@ _start:
lis r1,0x4000 /* BAS = 8000_0000 */
ori r1,r1,0x4580 /* 16k */
mtdcr isram0_sb0cr,r1
+#elif defined(CONFIG_460SX)
+ lis r1,0x0000 /* BAS = 0000_0000 */
+ ori r1,r1,0x0B84 /* first 128k */
+ mtdcr isram0_sb0cr,r1
+ lis r1,0x0001
+ ori r1,r1,0x0B84 /* second 128k */
+ mtdcr isram0_sb1cr,r1
+ lis r1, 0x0002
+ ori r1,r1, 0x0B84 /* third 128k */
+ mtdcr isram0_sb2cr,r1
+ lis r1, 0x0003
+ ori r1,r1, 0x0B84 /* fourth 128k */
+ mtdcr isram0_sb3cr,r1
#elif defined(CONFIG_440GP)
ori r1,r1,0x0380 /* 8k rw */
mtdcr isram0_sb0cr,r1
@@ -1415,7 +1429,8 @@ relocate_code:
#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT)
+ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
+ defined(CONFIG_460SX)
/*
* On some 440er platforms the cache is enabled in the first TLB (Boot-CS)
* to speed up the boot process. Now this cache needs to be disabled.
diff --git a/cpu/ppc4xx/uic.c b/cpu/ppc4xx/uic.c
new file mode 100644
index 0000000000..7944c6c3c2
--- /dev/null
+++ b/cpu/ppc4xx/uic.c
@@ -0,0 +1,180 @@
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002 (440 port)
+ * Scott McNutt, Artesyn Communication Producs, smcnutt@artsyncp.com
+ *
+ * (C) Copyright 2003 (440GX port)
+ * Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
+ *
+ * (C) Copyright 2008 (PPC440X05 port for Virtex 5 FX)
+ * Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * Work supported by Qtechnology (htpp://qtec.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/interrupt.h>
+#include <ppc4xx.h>
+#include <ppc_asm.tmpl>
+#include <commproc.h>
+
+#if (UIC_MAX > 3)
+#define UICB0_ALL (UIC_MASK(VECNUM_UIC1CI) | UIC_MASK(VECNUM_UIC1NCI) | \
+ UIC_MASK(VECNUM_UIC2CI) | UIC_MASK(VECNUM_UIC2NCI) | \
+ UIC_MASK(VECNUM_UIC3CI) | UIC_MASK(VECNUM_UIC3NCI))
+#elif (UIC_MAX > 2)
+#define UICB0_ALL (UIC_MASK(VECNUM_UIC1CI) | UIC_MASK(VECNUM_UIC1NCI) | \
+ UIC_MASK(VECNUM_UIC2CI) | UIC_MASK(VECNUM_UIC2NCI))
+#elif (UIC_MAX > 1)
+#define UICB0_ALL (UIC_MASK(VECNUM_UIC1CI) | UIC_MASK(VECNUM_UIC1NCI))
+#else
+#define UICB0_ALL 0
+#endif
+
+u32 get_dcr(u16);
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void pic_enable(void)
+{
+#if (UIC_MAX > 1)
+ /* Install the UIC1 handlers */
+ irq_install_handler(VECNUM_UIC1NCI, (void *)(void *)external_interrupt, 0);
+ irq_install_handler(VECNUM_UIC1CI, (void *)(void *)external_interrupt, 0);
+#endif
+#if (UIC_MAX > 2)
+ irq_install_handler(VECNUM_UIC2NCI, (void *)(void *)external_interrupt, 0);
+ irq_install_handler(VECNUM_UIC2CI, (void *)(void *)external_interrupt, 0);
+#endif
+#if (UIC_MAX > 3)
+ irq_install_handler(VECNUM_UIC3NCI, (void *)(void *)external_interrupt, 0);
+ irq_install_handler(VECNUM_UIC3CI, (void *)(void *)external_interrupt, 0);
+#endif
+}
+
+/* Handler for UIC interrupt */
+static void uic_interrupt(u32 uic_base, int vec_base)
+{
+ u32 uic_msr;
+ u32 msr_shift;
+ int vec;
+
+ /*
+ * Read masked interrupt status register to determine interrupt source
+ */
+ uic_msr = get_dcr(uic_base + UIC_MSR);
+ msr_shift = uic_msr;
+ vec = vec_base;
+
+ while (msr_shift != 0) {
+ if (msr_shift & 0x80000000)
+ interrupt_run_handler(vec);
+ /*
+ * Shift msr to next position and increment vector
+ */
+ msr_shift <<= 1;
+ vec++;
+ }
+}
+
+/*
+ * Handle external interrupts
+ */
+void external_interrupt(struct pt_regs *regs)
+{
+ u32 uic_msr;
+
+ /*
+ * Read masked interrupt status register to determine interrupt source
+ */
+ uic_msr = mfdcr(uic0msr);
+
+#if (UIC_MAX > 1)
+ if ((UIC_MASK(VECNUM_UIC1CI) & uic_msr) ||
+ (UIC_MASK(VECNUM_UIC1NCI) & uic_msr))
+ uic_interrupt(UIC1_DCR_BASE, 32);
+#endif
+
+#if (UIC_MAX > 2)
+ if ((UIC_MASK(VECNUM_UIC2CI) & uic_msr) ||
+ (UIC_MASK(VECNUM_UIC2NCI) & uic_msr))
+ uic_interrupt(UIC2_DCR_BASE, 64);
+#endif
+
+#if (UIC_MAX > 3)
+ if ((UIC_MASK(VECNUM_UIC3CI) & uic_msr) ||
+ (UIC_MASK(VECNUM_UIC3NCI) & uic_msr))
+ uic_interrupt(UIC3_DCR_BASE, 96);
+#endif
+
+ if (uic_msr & ~(UICB0_ALL))
+ uic_interrupt(UIC0_DCR_BASE, 0);
+
+ mtdcr(uic0sr, uic_msr);
+
+ return;
+}
+
+void pic_irq_ack(unsigned int vec)
+{
+ if ((vec >= 0) && (vec < 32))
+ mtdcr(uicsr, UIC_MASK(vec));
+ else if ((vec >= 32) && (vec < 64))
+ mtdcr(uic1sr, UIC_MASK(vec));
+ else if ((vec >= 64) && (vec < 96))
+ mtdcr(uic2sr, UIC_MASK(vec));
+ else if (vec >= 96)
+ mtdcr(uic3sr, UIC_MASK(vec));
+}
+
+/*
+ * Install and free a interrupt handler.
+ */
+void pic_irq_enable(unsigned int vec)
+{
+
+ if ((vec >= 0) && (vec < 32))
+ mtdcr(uicer, mfdcr(uicer) | UIC_MASK(vec));
+ else if ((vec >= 32) && (vec < 64))
+ mtdcr(uic1er, mfdcr(uic1er) | UIC_MASK(vec));
+ else if ((vec >= 64) && (vec < 96))
+ mtdcr(uic2er, mfdcr(uic2er) | UIC_MASK(vec));
+ else if (vec >= 96)
+ mtdcr(uic3er, mfdcr(uic3er) | UIC_MASK(vec));
+
+ debug("Install interrupt for vector %d ==> %p\n", vec, handler);
+}
+
+void pic_irq_disable(unsigned int vec)
+{
+ if ((vec >= 0) && (vec < 32))
+ mtdcr(uicer, mfdcr(uicer) & ~UIC_MASK(vec));
+ else if ((vec >= 32) && (vec < 64))
+ mtdcr(uic1er, mfdcr(uic1er) & ~UIC_MASK(vec));
+ else if ((vec >= 64) && (vec < 96))
+ mtdcr(uic2er, mfdcr(uic2er) & ~UIC_MASK(vec));
+ else if (vec >= 96)
+ mtdcr(uic3er, mfdcr(uic3er) & ~UIC_MASK(vec));
+}
diff --git a/cpu/ppc4xx/usbdev.c b/cpu/ppc4xx/usbdev.c
index d71ba7710a..faf7f0878f 100644
--- a/cpu/ppc4xx/usbdev.c
+++ b/cpu/ppc4xx/usbdev.c
@@ -6,8 +6,8 @@
#if (defined(CONFIG_440EP) || defined(CONFIG_440EPX)) && defined(CONFIG_CMD_USB)
#include <usb.h>
+#include <asm/ppc4xx-uic.h>
#include "usbdev.h"
-#include <asm/ppc4xx-intvec.h>
#define USB_DT_DEVICE 0x01
#define USB_DT_CONFIG 0x02
@@ -197,7 +197,7 @@ void usb_dev_init()
/*enable interrupts */
*(unsigned char *)USB2D0_INTRUSBE_8 = 0x0f;
- irq_install_handler(VECNUM_HSB2D, (interrupt_handler_t *) usbInt,
+ irq_install_handler(VECNUM_USBDEV, (interrupt_handler_t *) usbInt,
NULL);
}
#else
diff --git a/cpu/ppc4xx/xilinx_irq.c b/cpu/ppc4xx/xilinx_irq.c
new file mode 100644
index 0000000000..71087771cb
--- /dev/null
+++ b/cpu/ppc4xx/xilinx_irq.c
@@ -0,0 +1,100 @@
+/*
+ * (C) Copyright 2008
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * This work has been supported by: QTechnology http://qtec.com/
+ * Based on interrupts.c Wolfgang Denk-DENX Software Engineering-wd@denx.de
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/interrupt.h>
+#include <ppc4xx.h>
+#include <ppc_asm.tmpl>
+#include <commproc.h>
+#include <asm/io.h>
+#include <asm/xilinx_irq.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void pic_enable(void)
+{
+ debug("Xilinx PIC at 0x%8x\n", intc);
+
+ /*
+ * Disable all external interrupts until they are
+ * explicitly requested.
+ */
+ out_be32((u32 *) IER, 0);
+
+ /* Acknowledge any pending interrupts just in case. */
+ out_be32((u32 *) IAR, 0xffffffff);
+
+ /* Turn on the Master Enable. */
+ out_be32((u32 *) MER, 0x3UL);
+
+ return;
+}
+
+int xilinx_pic_irq_get(void)
+{
+ u32 irq;
+ irq = in_be32((u32 *) IVR);
+
+ /* If no interrupt is pending then all bits of the IVR are set to 1. As
+ * the IVR is as many bits wide as numbers of inputs are available.
+ * Therefore, if all bits of the IVR are set to one, its content will
+ * be bigger than XPAR_INTC_MAX_NUM_INTR_INPUTS.
+ */
+ if (irq >= XPAR_INTC_MAX_NUM_INTR_INPUTS)
+ irq = -1; /* report no pending interrupt. */
+
+ debug("get_irq: %d\n", irq);
+ return (irq);
+}
+
+void pic_irq_enable(unsigned int irq)
+{
+ u32 mask = IRQ_MASK(irq);
+ debug("enable: %d\n", irq);
+ out_be32((u32 *) SIE, mask);
+}
+
+void pic_irq_disable(unsigned int irq)
+{
+ u32 mask = IRQ_MASK(irq);
+ debug("disable: %d\n", irq);
+ out_be32((u32 *) CIE, mask);
+}
+
+void pic_irq_ack(unsigned int irq)
+{
+ u32 mask = IRQ_MASK(irq);
+ debug("ack: %d\n", irq);
+ out_be32((u32 *) IAR, mask);
+}
+
+void external_interrupt(struct pt_regs *regs)
+{
+ int irq;
+
+ irq = xilinx_pic_irq_get();
+ if (irq < 0)
+ return;
+
+ interrupt_run_handler(irq);
+
+ return;
+}
OpenPOWER on IntegriCloud