diff options
Diffstat (limited to 'cpu/mpc8220/dramSetup.c')
| -rw-r--r-- | cpu/mpc8220/dramSetup.c | 14 |
1 files changed, 7 insertions, 7 deletions
diff --git a/cpu/mpc8220/dramSetup.c b/cpu/mpc8220/dramSetup.c index 08e3172f2b..52cf1333f7 100644 --- a/cpu/mpc8220/dramSetup.c +++ b/cpu/mpc8220/dramSetup.c @@ -34,9 +34,9 @@ characteristics to initialize the dram on MPC8220 DECLARE_GLOBAL_DATA_PTR; -#define SPD_SIZE CFG_SDRAM_SPD_SIZE -#define DRAM_SPD (CFG_SDRAM_SPD_I2C_ADDR)<<1 /* on Board SPD eeprom */ -#define TOTAL_BANK CFG_SDRAM_TOTAL_BANKS +#define SPD_SIZE CONFIG_SYS_SDRAM_SPD_SIZE +#define DRAM_SPD (CONFIG_SYS_SDRAM_SPD_I2C_ADDR)<<1 /* on Board SPD eeprom */ +#define TOTAL_BANK CONFIG_SYS_SDRAM_TOTAL_BANKS int spd_status (volatile i2c8220_t * pi2c, u8 sta_bit, u8 truefalse) { @@ -103,7 +103,7 @@ int readSpdData (u8 * spdData) /* Enable Port Configuration for SDA and SDL signals */ pcfg = (volatile pcfg8220_t *) (MMAP_PCFG); __asm__ ("sync"); - pcfg->pcfg3 &= ~CFG_I2C_PORT3_CONFIG; + pcfg->pcfg3 &= ~CONFIG_SYS_I2C_PORT3_CONFIG; __asm__ ("sync"); /* Points the structure to I2c mbar memory offset */ @@ -144,7 +144,7 @@ int readSpdData (u8 * spdData) break; } - pi2cReg->adr = CFG_I2C_SLAVE<<1; + pi2cReg->adr = CONFIG_SYS_I2C_SLAVE<<1; pi2cReg->cr = I2C_CTL_EN; /* Set Enable */ @@ -541,7 +541,7 @@ u32 dramSetup (void) } /* Set up the Drive Strength register */ - sysconf->sdramds = CFG_SDRAM_DRIVE_STRENGTH; + sysconf->sdramds = CONFIG_SYS_SDRAM_DRIVE_STRENGTH; /* ********************** Cfg 1 ************************* */ @@ -679,7 +679,7 @@ u32 dramSetup (void) /* Set up mode value for CAS latency */ -#if (CFG_SDRAM_CAS_LATENCY==5) /* CL=2.5 */ +#if (CONFIG_SYS_SDRAM_CAS_LATENCY==5) /* CL=2.5 */ mode_value = (MODE_MODE | MODE_BURSTLEN (MODE_BURSTLEN_8) | MODE_BT_SEQUENTIAL | MODE_CL (MODE_CL_2p5) | MODE_CMD); #else |
