1 files changed, 113 insertions, 0 deletions
diff --git a/cmd/dfu.c b/cmd/dfu.c
new file mode 100644
index 0000000000..6d95ce9223
--- /dev/null
+++ b/cmd/dfu.c
@@ -0,0 +1,113 @@
+/*
+ * cmd_dfu.c -- dfu command
+ *
+ * Copyright (C) 2015
+ * Lukasz Majewski <l.majewski@majess.pl>
+ *
+ * Copyright (C) 2012 Samsung Electronics
+ * authors: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
+ *	    Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <dfu.h>
+#include <console.h>
+#include <g_dnl.h>
+#include <usb.h>
+#include <net.h>
+
+static int do_dfu(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	bool dfu_reset = false;
+
+	if (argc < 4)
+		return CMD_RET_USAGE;
+
+	char *usb_controller = argv[1];
+	char *interface = argv[2];
+	char *devstring = argv[3];
+
+	int ret, i = 0;
+#ifdef CONFIG_DFU_TFTP
+	unsigned long addr = 0;
+	if (!strcmp(argv[1], "tftp")) {
+		if (argc == 5)
+			addr = simple_strtoul(argv[4], NULL, 0);
+
+		return update_tftp(addr, interface, devstring);
+	}
+#endif
+
+	ret = dfu_init_env_entities(interface, devstring);
+	if (ret)
+		goto done;
+
+	ret = CMD_RET_SUCCESS;
+	if (argc > 4 && strcmp(argv[4], "list") == 0) {
+		dfu_show_entities();
+		goto done;
+	}
+
+	int controller_index = simple_strtoul(usb_controller, NULL, 0);
+	board_usb_init(controller_index, USB_INIT_DEVICE);
+	g_dnl_clear_detach();
+	g_dnl_register("usb_dnl_dfu");
+	while (1) {
+		if (g_dnl_detach()) {
+			/*
+			 * Check if USB bus reset is performed after detach,
+			 * which indicates that -R switch has been passed to
+			 * dfu-util. In this case reboot the device
+			 */
+			if (dfu_usb_get_reset()) {
+				dfu_reset = true;
+				goto exit;
+			}
+
+			/*
+			 * This extra number of usb_gadget_handle_interrupts()
+			 * calls is necessary to assure correct transmission
+			 * completion with dfu-util
+			 */
+			if (++i == 10000)
+				goto exit;
+		}
+
+		if (ctrlc())
+			goto exit;
+
+		WATCHDOG_RESET();
+		usb_gadget_handle_interrupts(controller_index);
+	}
+exit:
+	g_dnl_unregister();
+	board_usb_cleanup(controller_index, USB_INIT_DEVICE);
+done:
+	dfu_free_entities();
+
+	if (dfu_reset)
+		run_command("reset", 0);
+
+	g_dnl_clear_detach();
+
+	return ret;
+}
+
+U_BOOT_CMD(dfu, CONFIG_SYS_MAXARGS, 1, do_dfu,
+	"Device Firmware Upgrade",
+	"<USB_controller> <interface> <dev> [list]\n"
+	"  - device firmware upgrade via <USB_controller>\n"
+	"    on device <dev>, attached to interface\n"
+	"    <interface>\n"
+	"    [list] - list available alt settings\n"
+#ifdef CONFIG_DFU_TFTP
+	"dfu tftp <interface> <dev> [<addr>]\n"
+	"  - device firmware upgrade via TFTP\n"
+	"    on device <dev>, attached to interface\n"
+	"    <interface>\n"
+	"    [<addr>] - address where FIT image has been stored\n"
+#endif
+);