summaryrefslogtreecommitdiffstats
path: root/board/technexion/tao3530/tao3530.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/technexion/tao3530/tao3530.c')
-rw-r--r--board/technexion/tao3530/tao3530.c215
1 files changed, 215 insertions, 0 deletions
diff --git a/board/technexion/tao3530/tao3530.c b/board/technexion/tao3530/tao3530.c
new file mode 100644
index 0000000000..44a82406aa
--- /dev/null
+++ b/board/technexion/tao3530/tao3530.c
@@ -0,0 +1,215 @@
+/*
+ * Maintainer :
+ * Tapani Utriainen <linuxfae@technexion.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+#include <netdev.h>
+#include <twl4030.h>
+#include <asm/io.h>
+#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/gpio.h>
+#include <asm/gpio.h>
+#include <asm/mach-types.h>
+
+#include <usb.h>
+#include <asm/ehci-omap.h>
+
+#include "tao3530.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int tao3530_revision(void)
+{
+ int ret = 0;
+
+ /* char *label argument is unused in gpio_request() */
+ ret = gpio_request(65, "");
+ if (ret) {
+ puts("Error: GPIO 65 not available\n");
+ goto out;
+ }
+ MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M4));
+
+ ret = gpio_request(1, "");
+ if (ret) {
+ puts("Error: GPIO 1 not available\n");
+ goto out2;
+ }
+ MUX_VAL(CP(SYS_CLKREQ), (IEN | PTU | EN | M4));
+
+ ret = gpio_direction_input(65);
+ if (ret) {
+ puts("Error: GPIO 65 not available for input\n");
+ goto out3;
+ }
+
+ ret = gpio_direction_input(1);
+ if (ret) {
+ puts("Error: GPIO 1 not available for input\n");
+ goto out3;
+ }
+
+ ret = gpio_get_value(65) << 1 | gpio_get_value(1);
+
+out3:
+ MUX_VAL(CP(SYS_CLKREQ), (IEN | PTU | EN | M0));
+ gpio_free(1);
+out2:
+ MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0));
+ gpio_free(65);
+out:
+
+ return ret;
+}
+
+#ifdef CONFIG_SPL_BUILD
+/*
+ * Routine: get_board_mem_timings
+ * Description: If we use SPL then there is no x-loader nor config header
+ * so we have to setup the DDR timings ourself on both banks.
+ */
+void get_board_mem_timings(struct board_sdrc_timings *timings)
+{
+#if defined(CONFIG_SYS_BOARD_OMAP3_HA)
+ /*
+ * Switch baseboard LED to red upon power-on
+ */
+ MUX_OMAP3_HA();
+
+ /* Request a gpio before using it */
+ gpio_request(111, "");
+ /* Sets the gpio as output and its value to 1, switch LED to red */
+ gpio_direction_output(111, 1);
+#endif
+
+ if (tao3530_revision() < 3) {
+ /* 256MB / Bank */
+ timings->mcfg = MCFG(256 << 20, 14); /* RAS-width 14 */
+ timings->ctrla = HYNIX_V_ACTIMA_165;
+ timings->ctrlb = HYNIX_V_ACTIMB_165;
+ } else {
+ /* 128MB / Bank */
+ timings->mcfg = MCFG(128 << 20, 13); /* RAS-width 13 */
+ timings->ctrla = MICRON_V_ACTIMA_165;
+ timings->ctrlb = MICRON_V_ACTIMB_165;
+ }
+
+ timings->mr = MICRON_V_MR_165;
+ timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
+}
+#endif
+
+/*
+ * Routine: board_init
+ * Description: Early hardware init.
+ */
+int board_init(void)
+{
+ gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
+ /* board id for Linux */
+ gd->bd->bi_arch_number = MACH_TYPE_OMAP3_TAO3530;
+ /* boot param addr */
+ gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
+
+ return 0;
+}
+
+/*
+ * Routine: misc_init_r
+ * Description: Configure board specific parts
+ */
+int misc_init_r(void)
+{
+ struct gpio *gpio5_base = (struct gpio *)OMAP34XX_GPIO5_BASE;
+ struct gpio *gpio6_base = (struct gpio *)OMAP34XX_GPIO6_BASE;
+
+ twl4030_power_init();
+ twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON);
+
+ /* Configure GPIOs to output */
+ /* GPIO23 */
+ writel(~(GPIO10 | GPIO8 | GPIO2 | GPIO1), &gpio6_base->oe);
+ writel(~(GPIO31 | GPIO30 | GPIO22 | GPIO21 |
+ GPIO15 | GPIO14 | GPIO13 | GPIO12), &gpio5_base->oe);
+
+ /* Set GPIOs */
+ writel(GPIO10 | GPIO8 | GPIO2 | GPIO1,
+ &gpio6_base->setdataout);
+ writel(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 |
+ GPIO15 | GPIO14 | GPIO13 | GPIO12, &gpio5_base->setdataout);
+
+ switch (tao3530_revision()) {
+ case 0:
+ puts("TAO-3530 REV Reserve 1\n");
+ break;
+ case 1:
+ puts("TAO-3530 REV Reserve 2\n");
+ break;
+ case 2:
+ puts("TAO-3530 REV Cx\n");
+ break;
+ case 3:
+ puts("TAO-3530 REV Ax/Bx\n");
+ break;
+ default:
+ puts("Unknown board revision\n");
+ }
+
+ dieid_num_r();
+
+ return 0;
+}
+
+/*
+ * Routine: set_muxconf_regs
+ * Description: Setting up the configuration Mux registers specific to the
+ * hardware. Many pins need to be moved from protect to primary
+ * mode.
+ */
+void set_muxconf_regs(void)
+{
+ MUX_TAO3530();
+#if defined(CONFIG_SYS_BOARD_OMAP3_HA)
+ MUX_OMAP3_HA();
+#endif
+}
+
+#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
+int board_mmc_init(bd_t *bis)
+{
+ omap_mmc_init(0, 0, 0, -1, -1);
+
+ return 0;
+}
+#endif
+
+#if defined(CONFIG_USB_EHCI) && !defined(CONFIG_SPL_BUILD)
+/* Call usb_stop() before starting the kernel */
+void show_boot_progress(int val)
+{
+ if (val == BOOTSTAGE_ID_RUN_OS)
+ usb_stop();
+}
+
+static struct omap_usbhs_board_data usbhs_bdata = {
+ .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
+ .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+ .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED
+};
+
+int ehci_hcd_init(int index, enum usb_init_type init,
+ struct ehci_hccr **hccr, struct ehci_hcor **hcor)
+{
+ return omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
+}
+
+int ehci_hcd_stop(int index)
+{
+ return omap_ehci_hcd_stop();
+}
+#endif /* CONFIG_USB_EHCI */
OpenPOWER on IntegriCloud