diff options
Diffstat (limited to 'board/sunxi')
27 files changed, 500 insertions, 790 deletions
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig index 6a4d764b7c..4a2158988f 100644 --- a/board/sunxi/Kconfig +++ b/board/sunxi/Kconfig @@ -33,21 +33,103 @@ config MACH_SUN8I endchoice -if MACH_SUN6I || MACH_SUN8I - config DRAM_CLK - int "sun6i dram clock speed" - default 312 + int "sunxi dram clock speed" + default 312 if MACH_SUN6I || MACH_SUN8I + default 360 if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I ---help--- Set the dram clock speed, valid range 240 - 480, must be a multiple of 24. +if MACH_SUN5I || MACH_SUN7I +config DRAM_MBUS_CLK + int "sunxi mbus clock speed" + default 300 + ---help--- + Set the mbus clock speed. The maximum on sun5i hardware is 300MHz. + +endif + config DRAM_ZQ - int "sun6i dram zq value" - default 123 + int "sunxi dram zq value" + default 123 if MACH_SUN4I || MACH_SUN5I || MACH_SUN6I || MACH_SUN8I + default 127 if MACH_SUN7I ---help--- Set the dram zq value. +if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I +config DRAM_EMR1 + int "sunxi dram emr1 value" + default 0 if MACH_SUN4I + default 4 if MACH_SUN5I || MACH_SUN7I + ---help--- + Set the dram controller emr1 value. + +config DRAM_ODT_EN + int "sunxi dram odt_en value" + default 0 + ---help--- + Set the dram controller odt_en parameter. This can be used to + enable/disable the ODT feature. + +config DRAM_TPR3 + hex "sunxi dram tpr3 value" + default 0 + ---help--- + Set the dram controller tpr3 parameter. This parameter configures + the delay on the command lane and also phase shifts, which are + applied for sampling incoming read data. The default value 0 + means that no phase/delay adjustments are necessary. Properly + configuring this parameter increases reliability at high DRAM + clock speeds. + +config DRAM_DQS_GATING_DELAY + hex "sunxi dram dqs_gating_delay value" + default 0 + ---help--- + Set the dram controller dqs_gating_delay parmeter. Each byte + encodes the DQS gating delay for each byte lane. The delay + granularity is 1/4 cycle. For example, the value 0x05060606 + means that the delay is 5 quarter-cycles for one lane (1.25 + cycles) and 6 quarter-cycles (1.5 cycles) for 3 other lanes. + The default value 0 means autodetection. The results of hardware + autodetection are not very reliable and depend on the chip + temperature (sometimes producing different results on cold start + and warm reboot). But the accuracy of hardware autodetection + is usually good enough, unless running at really high DRAM + clocks speeds (up to 600MHz). If unsure, keep as 0. + +choice + prompt "sunxi dram timings" + default DRAM_TIMINGS_VENDOR_MAGIC + ---help--- + Select the timings of the DDR3 chips. + +config DRAM_TIMINGS_VENDOR_MAGIC + bool "Magic vendor timings from Android" + ---help--- + The same DRAM timings as in the Allwinner boot0 bootloader. + +config DRAM_TIMINGS_DDR3_1066F_1333H + bool "JEDEC DDR3-1333H with down binning to DDR3-1066F" + ---help--- + Use the timings of the standard JEDEC DDR3-1066F speed bin for + DRAM_CLK <= 533MHz and the timings of the DDR3-1333H speed bin + for DRAM_CLK > 533MHz. This covers the majority of DDR3 chips + used in Allwinner A10/A13/A20 devices. In the case of DDR3-1333 + or DDR3-1600 chips, be sure to check the DRAM datasheet to confirm + that down binning to DDR3-1066F is supported (because DDR3-1066F + uses a bit faster timings than DDR3-1333H). + +config DRAM_TIMINGS_DDR3_800E_1066G_1333J + bool "JEDEC DDR3-800E / DDR3-1066G / DDR3-1333J" + ---help--- + Use the timings of the slowest possible JEDEC speed bin for the + selected DRAM_CLK. Depending on the DRAM_CLK value, it may be + DDR3-800E, DDR3-1066G or DDR3-1333J. + +endchoice + endif config SYS_CONFIG_NAME @@ -57,149 +139,6 @@ config SYS_CONFIG_NAME default "sun7i" if MACH_SUN7I default "sun8i" if MACH_SUN8I -choice - prompt "Board" - -config TARGET_A10_OLINUXINO_L - bool "A10_OLINUXINO_L" - depends on MACH_SUN4I - -config TARGET_A10S_OLINUXINO_M - bool "A10S_OLINUXINO_M" - depends on MACH_SUN5I - -config TARGET_A13_OLINUXINOM - bool "A13_OLINUXINOM" - depends on MACH_SUN5I - -config TARGET_A13_OLINUXINO - bool "A13_OLINUXINO" - depends on MACH_SUN5I - -config TARGET_A20_OLINUXINO_L2 - bool "A20_OLINUXINO_L2" - depends on MACH_SUN7I - -config TARGET_A20_OLINUXINO_L - bool "A20_OLINUXINO_L" - depends on MACH_SUN7I - -config TARGET_A20_OLINUXINO_M - bool "A20_OLINUXINO_M" - depends on MACH_SUN7I - -config TARGET_AUXTEK_T004 - bool "AUXTEK_T004" - depends on MACH_SUN5I - -config TARGET_BANANAPI - bool "BANANAPI" - depends on MACH_SUN7I - -config TARGET_BANANAPRO - bool "BANANAPRO" - depends on MACH_SUN7I - -config TARGET_COLOMBUS - bool "COLOMBUS" - depends on MACH_SUN6I - -config TARGET_CUBIEBOARD2 - bool "CUBIEBOARD2" - depends on MACH_SUN7I - -config TARGET_CUBIEBOARD - bool "CUBIEBOARD" - depends on MACH_SUN4I - -config TARGET_CUBIETRUCK - bool "CUBIETRUCK" - depends on MACH_SUN7I - -config TARGET_HUMMINGBIRD_A31 - bool "HUMMINGBIRD_A31" - depends on MACH_SUN6I - -config TARGET_IPPO_Q8H_V5 - bool "IPPO_Q8H_V5" - depends on MACH_SUN8I - -config TARGET_PCDUINO - bool "PCDUINO" - depends on MACH_SUN4I - -config TARGET_PCDUINO3 - bool "PCDUINO3" - depends on MACH_SUN7I - -config TARGET_MELE_A1000G - bool "MELE_A1000G" - depends on MACH_SUN4I - -config TARGET_MELE_A1000 - bool "MELE_A1000" - depends on MACH_SUN4I - -config TARGET_MELE_M3 - bool "MELE_M3" - depends on MACH_SUN7I - -config TARGET_MELE_M9 - bool "MELE_M9" - depends on MACH_SUN6I - -config TARGET_MINI_X_1GB - bool "MINI_X_1GB" - depends on MACH_SUN4I - -config TARGET_MINI_X - bool "MINI_X" - depends on MACH_SUN4I - -config TARGET_MSI_PRIMO73 - bool "MSI Primo73 (7\" tablet)" - depends on MACH_SUN7I - ---help--- - The MSI Primo73 is an A20 based tablet, with 1G RAM, 16G NAND, - 1024x600 TN LCD display, mono speaker, 0.3 MP front camera, 2.0 MP - rear camera, 3000 mAh battery, gt911 touchscreen, mma8452 accelerometer - and rtl8188etv usb wifi. Has "power", "volume+" and "volume-" buttons - (both volume buttons are also connected to the UBOOT_SEL pin). The - external connectors are represented by MicroSD slot, MiniHDMI, MicroUSB - OTG and 3.5mm headphone jack. More details are available at - http://linux-sunxi.org/MSI_Primo73 - -config TARGET_MSI_PRIMO81 - bool "MSI Primo81 (7.85\" tablet)" - depends on MACH_SUN6I - ---help--- - The MSI Primo81 is an A31s based tablet, with 1G RAM, 16G NAND, - 1024x768 IPS LCD display, mono speaker, 0.3 MP front camera, 2.0 MP - rear camera, 3500 mAh battery, gt911 touchscreen, mma8452 accelerometer - and rtl8188etv usb wifi. Has "power", "volume+" and "volume-" buttons - (both volume buttons are also connected to the UBOOT_SEL pin). The - external connectors are represented by MicroSD slot, MiniHDMI, MicroUSB - OTG and 3.5mm headphone jack. More details are available at - http://linux-sunxi.org/MSI_Primo81 - -config TARGET_BA10_TV_BOX - bool "BA10_TV_BOX" - depends on MACH_SUN4I - -config TARGET_I12_TVBOX - bool "I12_TVBOX" - depends on MACH_SUN7I - -config TARGET_QT840A - bool "QT840A" - depends on MACH_SUN7I - -config TARGET_R7DONGLE - bool "R7DONGLE" - depends on MACH_SUN5I - -endchoice - config SYS_BOARD default "sunxi" @@ -321,6 +260,16 @@ config VIDEO_VGA_VIA_LCD LCD interface driving a VGA connector, such as found on the Olimex A13 boards. +config VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH + boolean "Force sync active high for VGA via LCD controller support" + depends on VIDEO_VGA_VIA_LCD + default n + ---help--- + Say Y here if you've a board which uses opendrain drivers for the vga + hsync and vsync signals. Opendrain drivers cannot generate steep enough + positive edges for a stable video output, so on boards with opendrain + drivers the sync signals must always be active high. + config VIDEO_VGA_EXTERNAL_DAC_EN string "LCD panel power enable pin" depends on VIDEO_VGA_VIA_LCD @@ -338,6 +287,13 @@ config VIDEO_LCD_MODE This is in drivers/video/videomodes.c: video_get_params() format, e.g. x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo:22,hs:30,vs:1,sync:0,vmode:0 +config VIDEO_LCD_DCLK_PHASE + int "LCD panel display clock phase" + depends on VIDEO + default 1 + ---help--- + Select LCD panel display clock phase shift, range 0-3. + config VIDEO_LCD_POWER string "LCD panel power enable pin" depends on VIDEO @@ -363,6 +319,13 @@ config VIDEO_LCD_BL_PWM Set the backlight pwm pin for the LCD panel. This takes a string in the format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H. +config VIDEO_LCD_BL_PWM_ACTIVE_LOW + bool "LCD panel backlight pwm is inverted" + depends on VIDEO + default y + ---help--- + Set this if the backlight pwm output is active low. + # Note only one of these may be selected at a time! But hidden choices are # not supported by Kconfig @@ -387,9 +350,32 @@ config VIDEO_LCD_PANEL_LVDS bool "Generic lvds interface LCD panel" select VIDEO_LCD_IF_LVDS +config VIDEO_LCD_PANEL_MIPI_4_LANE_513_MBPS_VIA_SSD2828 + bool "MIPI 4-lane, 513Mbps LCD panel via SSD2828 bridge chip" + select VIDEO_LCD_SSD2828 + select VIDEO_LCD_IF_PARALLEL + ---help--- + 7.85" 768x1024 LCD panels, such as LG LP079X01 or AUO B079XAN01.0 + +config VIDEO_LCD_PANEL_HITACHI_TX18D42VM + bool "Hitachi tx18d42vm LCD panel" + select VIDEO_LCD_HITACHI_TX18D42VM + select VIDEO_LCD_IF_LVDS + ---help--- + 7.85" 1024x768 Hitachi tx18d42vm LCD panel support + endchoice +config USB_MUSB_SUNXI + bool "Enable sunxi OTG / DRC USB controller in host mode" + default n + ---help--- + Say y here to enable support for the sunxi OTG / DRC USB controller + used on almost all sunxi boards. Note currently u-boot can only have + one usb host controller enabled at a time, so enabling this on boards + which also use the ehci host controller will result in build errors. + config USB_KEYBOARD boolean "Enable USB keyboard support" default y @@ -397,4 +383,10 @@ config USB_KEYBOARD Say Y here to add support for using a USB keyboard (typically used in combination with a graphical console). +config GMAC_TX_DELAY + int "GMAC Transmit Clock Delay Chain" + default 0 + ---help--- + Set the GMAC Transmit Clock Delay Chain value. + endif diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index 3a09be92de..faa413cb06 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -5,17 +5,20 @@ F: board/sunxi/ F: include/configs/sun4i.h F: configs/A10-OLinuXino-Lime_defconfig F: configs/ba10_tv_box_defconfig +F: configs/Chuwi_V7_CW0825_defconfig F: configs/Cubieboard_defconfig +F: configs/Hyundai_A7HD_defconfig F: configs/Mele_A1000_defconfig -F: configs/Mele_A1000G_defconfig F: configs/Mele_M3_defconfig F: configs/Mini-X_defconfig -F: configs/Mini-X-1Gb_defconfig +F: configs/mk802_defconfig +F: configs/mk802ii_defconfig F: include/configs/sun5i.h F: configs/A10s-OLinuXino-M_defconfig F: configs/A13-OLinuXino_defconfig F: configs/A13-OLinuXinoM_defconfig F: configs/Auxtek-T004_defconfig +F: configs/mk802_a10s_defconfig F: configs/r7-tv-dongle_defconfig F: include/configs/sun6i.h F: configs/CSQ_CS908_defconfig @@ -31,16 +34,6 @@ F: configs/qt840a_defconfig F: include/configs/sun8i.h F: configs/Ippo_q8h_v1_2_defconfig -CUBIEBOARD2 BOARD -M: Ian Campbell <ijc@hellion.org.uk> -M: Hans de Goede <hdegoede@redhat.com> -S: Maintained -F: include/configs/sun7i.h -F: configs/Cubieboard2_defconfig -F: configs/Cubieboard2_FEL_defconfig -F: configs/Cubietruck_defconfig -F: configs/Cubietruck_FEL_defconfig - A20-OLINUXINO-LIME BOARD M: FUKAUMI Naoki <naobsd@gmail.com> S: Maintained @@ -58,16 +51,57 @@ M: Maxime Ripard <maxime.ripard@free-electrons.com> S: Maintained F: configs/Colombus_defconfig -HUMMINIGBIRD-A31 BOARD +CUBIEBOARD2 BOARD +M: Ian Campbell <ijc@hellion.org.uk> +M: Hans de Goede <hdegoede@redhat.com> +S: Maintained +F: include/configs/sun7i.h +F: configs/Cubieboard2_defconfig +F: configs/Cubieboard2_FEL_defconfig +F: configs/Cubietruck_defconfig +F: configs/Cubietruck_FEL_defconfig + +GEMEI-G9 TABLET +M: Priit Laes <plaes@plaes.org> +S: Maintained +F: configs/sunxi_Gemei_G9_defconfig + +HUMMINGBIRD-A31 BOARD M: Chen-Yu Tsai <wens@csie.org> S: Maintained F: configs/Hummingbird_A31_defconfig +INET-86VS BOARD +M: Michal Suchanek <hramrach@gmail.com> +S: Maintained +F: board/sunxi/dram_inet_86vs.c +F: configs/Inet_86VS_defconfig + IPPO-Q8H-V5 BOARD M: Chen-Yu Tsai <wens@csie.org> S: Maintained F: configs/Ippo_q8h_v5_defconfig +LINKSPRITE-PCDUINO BOARD +M: Zoltan Herpai <wigyori@uid0.hu> +S: Maintained +F: configs/Linksprite_pcDuino_defconfig + +LINKSPRITE-PCDUINO3-NANO BOARD +M: Adam Sampson <ats@offog.org> +S: Maintained +F: configs/Linksprite_pcDuino3_Nano_defconfig + +MARSBOARD-A10 BOARD +M: Aleksei Mamlin <mamlinav@gmail.com> +S: Maintained +F: configs/Marsboard_A10_defconfig + +MELE M5 BOARD +M: Ian Campbell <ijc@hellion.org.uk> +S: Maintained +F: configs/Mele_M5_defconfig + MSI-PRIMO73 BOARD M: Siarhei Siamashka <siarhei.siamashka@gmail.com> S: Maintained @@ -78,7 +112,7 @@ M: Siarhei Siamashka <siarhei.siamashka@gmail.com> S: Maintained F: configs/MSI_Primo81_defconfig -LINKSPRITE-PCDUINO BOARD -M: Zoltan Herpai <wigyori@uid0.hu> +TZX-Q8-713B7 BOARD +M: Paul Kocialkowski <contact@paulk.fr> S: Maintained -F: configs/Linksprite_pcDuino_defconfig +F: configs/TZX-Q8-713B7_defconfig diff --git a/board/sunxi/Makefile b/board/sunxi/Makefile index fab0877a54..43766e0ef4 100644 --- a/board/sunxi/Makefile +++ b/board/sunxi/Makefile @@ -11,29 +11,6 @@ obj-y += board.o obj-$(CONFIG_SUNXI_GMAC) += gmac.o obj-$(CONFIG_SUNXI_AHCI) += ahci.o -obj-$(CONFIG_TARGET_A10_OLINUXINO_L) += dram_a10_olinuxino_l.o -obj-$(CONFIG_TARGET_A10S_OLINUXINO_M) += dram_a10s_olinuxino_m.o -obj-$(CONFIG_TARGET_A13_OLINUXINO) += dram_a13_olinuxino.o -obj-$(CONFIG_TARGET_A13_OLINUXINOM) += dram_a13_oli_micro.o -obj-$(CONFIG_TARGET_A20_OLINUXINO_L) += dram_a20_olinuxino_l.o -obj-$(CONFIG_TARGET_A20_OLINUXINO_L2) += dram_a20_olinuxino_l2.o -obj-$(CONFIG_TARGET_A20_OLINUXINO_M) += dram_sun7i_384_1024_iow16.o -# This is not a typo, uses the same mem settings as the a10s-olinuxino-m -obj-$(CONFIG_TARGET_AUXTEK_T004) += dram_a10s_olinuxino_m.o -obj-$(CONFIG_TARGET_BA10_TV_BOX) += dram_sun4i_384_1024_iow8.o -obj-$(CONFIG_TARGET_BANANAPI) += dram_bananapi.o -obj-$(CONFIG_TARGET_BANANAPRO) += dram_bananapi.o -obj-$(CONFIG_TARGET_CUBIEBOARD) += dram_cubieboard.o -obj-$(CONFIG_TARGET_CUBIEBOARD2) += dram_cubieboard2.o -obj-$(CONFIG_TARGET_CUBIETRUCK) += dram_cubietruck.o -obj-$(CONFIG_TARGET_I12_TVBOX) += dram_sun7i_384_1024_iow16.o -obj-$(CONFIG_TARGET_MELE_A1000) += dram_sun4i_360_512.o -obj-$(CONFIG_TARGET_MELE_A1000G) += dram_sun4i_360_1024_iow8.o -obj-$(CONFIG_TARGET_MELE_M3) += dram_sun7i_384_1024_iow16.o -obj-$(CONFIG_TARGET_MINI_X) += dram_sun4i_360_512.o -obj-$(CONFIG_TARGET_MINI_X_1GB) += dram_sun4i_360_1024_iow16.o -obj-$(CONFIG_TARGET_MSI_PRIMO73) += dram_sun7i_384_1024_iow16.o -obj-$(CONFIG_TARGET_PCDUINO) += dram_sun4i_408_1024_iow8.o -obj-$(CONFIG_TARGET_PCDUINO3) += dram_linksprite_pcduino3.o -obj-$(CONFIG_TARGET_QT840A) += dram_sun7i_384_512_busw16_iow16.o -obj-$(CONFIG_TARGET_R7DONGLE) += dram_r7dongle.o +obj-$(CONFIG_MACH_SUN4I) += dram_sun4i_auto.o +obj-$(CONFIG_MACH_SUN5I) += dram_sun5i_auto.o +obj-$(CONFIG_MACH_SUN7I) += dram_sun5i_auto.o diff --git a/board/sunxi/board.c b/board/sunxi/board.c index 7d6d075f14..b70e00ce6b 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -28,7 +28,9 @@ #include <asm/arch/dram.h> #include <asm/arch/gpio.h> #include <asm/arch/mmc.h> +#include <asm/arch/usbc.h> #include <asm/io.h> +#include <linux/usb/musb.h> #include <net.h> DECLARE_GLOBAL_DATA_PTR; @@ -189,6 +191,7 @@ void sunxi_board_init(void) power_failed |= axp221_set_aldo1(CONFIG_AXP221_ALDO1_VOLT); power_failed |= axp221_set_aldo2(CONFIG_AXP221_ALDO2_VOLT); power_failed |= axp221_set_aldo3(CONFIG_AXP221_ALDO3_VOLT); + power_failed |= axp221_set_eldo(3, CONFIG_AXP221_ELDO3_VOLT); #endif printf("DRAM:"); @@ -208,6 +211,26 @@ void sunxi_board_init(void) } #endif +#if defined(CONFIG_MUSB_HOST) || defined(CONFIG_MUSB_GADGET) +static struct musb_hdrc_config musb_config = { + .multipoint = 1, + .dyn_fifo = 1, + .num_eps = 6, + .ram_bits = 11, +}; + +static struct musb_hdrc_platform_data musb_plat = { +#if defined(CONFIG_MUSB_HOST) + .mode = MUSB_HOST, +#else + .mode = MUSB_PERIPHERAL, +#endif + .config = &musb_config, + .power = 250, + .platform_ops = &sunxi_musb_ops, +}; +#endif + #ifdef CONFIG_MISC_INIT_R int misc_init_r(void) { @@ -227,6 +250,9 @@ int misc_init_r(void) eth_setenv_enetaddr("ethaddr", mac_addr); } +#if defined(CONFIG_MUSB_HOST) || defined(CONFIG_MUSB_GADGET) + musb_register(&musb_plat, NULL, (void *)SUNXI_USB0_BASE); +#endif return 0; } #endif diff --git a/board/sunxi/dram_a10_olinuxino_l.c b/board/sunxi/dram_a10_olinuxino_l.c deleted file mode 100644 index 24a1bd9453..0000000000 --- a/board/sunxi/dram_a10_olinuxino_l.c +++ /dev/null @@ -1,31 +0,0 @@ -/* this file is generated, don't edit it yourself */ - -#include <common.h> -#include <asm/arch/dram.h> - -static struct dram_para dram_para = { - .clock = 480, - .type = 3, - .rank_num = 1, - .density = 4096, - .io_width = 16, - .bus_width = 16, - .cas = 6, - .zq = 123, - .odt_en = 0, - .size = 512, - .tpr0 = 0x30926692, - .tpr1 = 0x1090, - .tpr2 = 0x1a0c8, - .tpr3 = 0, - .tpr4 = 0, - .tpr5 = 0, - .emr1 = 0x4, - .emr2 = 0, - .emr3 = 0, -}; - -unsigned long sunxi_dram_init(void) -{ - return dramc_init(&dram_para); -} diff --git a/board/sunxi/dram_a10s_olinuxino_m.c b/board/sunxi/dram_a10s_olinuxino_m.c deleted file mode 100644 index 8900539e7f..0000000000 --- a/board/sunxi/dram_a10s_olinuxino_m.c +++ /dev/null @@ -1,31 +0,0 @@ -/* this file is generated, don't edit it yourself */ - -#include <common.h> -#include <asm/arch/dram.h> - -static struct dram_para dram_para = { - .clock = 432, - .type = 3, - .rank_num = 1, - .density = 4096, - .io_width = 16, - .bus_width = 16, - .cas = 9, - .zq = 123, - .odt_en = 0, - .size = 512, - .tpr0 = 0x42d899b7, - .tpr1 = 0xa090, - .tpr2 = 0x22a00, - .tpr3 = 0, - .tpr4 = 0, - .tpr5 = 0, - .emr1 = 0x4, - .emr2 = 0x10, - .emr3 = 0, -}; - -unsigned long sunxi_dram_init(void) -{ - return dramc_init(&dram_para); -} diff --git a/board/sunxi/dram_a13_oli_micro.c b/board/sunxi/dram_a13_oli_micro.c deleted file mode 100644 index 8154ea2ca9..0000000000 --- a/board/sunxi/dram_a13_oli_micro.c +++ /dev/null @@ -1,32 +0,0 @@ -/* this file is generated, don't edit it yourself */ - -#include <common.h> -#include <asm/arch/dram.h> - -static struct dram_para dram_para = { - .clock = 408, - .type = 3, - .rank_num = 1, - .density = 2048, - .io_width = 16, - .bus_width = 16, - .cas = 9, - .zq = 123, - .odt_en = 0, - .size = 256, - .tpr0 = 0x42d899b7, - .tpr1 = 0xa090, - .tpr2 = 0x22a00, - .tpr3 = 0, - .tpr4 = 0, - .tpr5 = 0, - .emr1 = 0, - .emr2 = 0x10, - .emr3 = 0, - -}; - -unsigned long sunxi_dram_init(void) -{ - return dramc_init(&dram_para); -} diff --git a/board/sunxi/dram_a13_olinuxino.c b/board/sunxi/dram_a13_olinuxino.c deleted file mode 100644 index ca96260250..0000000000 --- a/board/sunxi/dram_a13_olinuxino.c +++ /dev/null @@ -1,31 +0,0 @@ -/* this file is generated, don't edit it yourself */ - -#include <common.h> -#include <asm/arch/dram.h> - -static struct dram_para dram_para = { - .clock = 408, - .type = 3, - .rank_num = 1, - .density = 2048, - .io_width = 8, - .bus_width = 16, - .cas = 9, - .zq = 123, - .odt_en = 0, - .size = 512, - .tpr0 = 0x42d899b7, - .tpr1 = 0xa090, - .tpr2 = 0x22a00, - .tpr3 = 0, - .tpr4 = 0, - .tpr5 = 0, - .emr1 = 0, - .emr2 = 0x10, - .emr3 = 0, -}; - -unsigned long sunxi_dram_init(void) -{ - return dramc_init(&dram_para); -} diff --git a/board/sunxi/dram_a20_olinuxino_l.c b/board/sunxi/dram_a20_olinuxino_l.c deleted file mode 100644 index 2c74999708..0000000000 --- a/board/sunxi/dram_a20_olinuxino_l.c +++ /dev/null @@ -1,31 +0,0 @@ -/* this file is generated, don't edit it yourself */ - -#include "common.h" -#include <asm/arch/dram.h> - -static struct dram_para dram_para = { - .clock = 480, - .type = 3, - .rank_num = 1, - .density = 4096, - .io_width = 16, - .bus_width = 16, - .cas = 9, - .zq = 0x7f, - .odt_en = 0, - .size = 512, - .tpr0 = 0x42d899b7, - .tpr1 = 0xa090, - .tpr2 = 0x22a00, - .tpr3 = 0, - .tpr4 = 0, - .tpr5 = 0, - .emr1 = 0x4, - .emr2 = 0x10, - .emr3 = 0, -}; - -unsigned long sunxi_dram_init(void) -{ - return dramc_init(&dram_para); -} diff --git a/board/sunxi/dram_a20_olinuxino_l2.c b/board/sunxi/dram_a20_olinuxino_l2.c deleted file mode 100644 index 2115d37470..0000000000 --- a/board/sunxi/dram_a20_olinuxino_l2.c +++ /dev/null @@ -1,31 +0,0 @@ -/* this file is generated, don't edit it yourself */ - -#include <common.h> -#include <asm/arch/dram.h> - -static struct dram_para dram_para = { - .clock = 480, - .type = 3, - .rank_num = 1, - .density = 4096, - .io_width = 16, - .bus_width = 32, - .cas = 9, - .zq = 0x7f, - .odt_en = 0, - .size = 1024, - .tpr0 = 0x42d899b7, - .tpr1 = 0xa090, - .tpr2 = 0x22a00, - .tpr3 = 0, - .tpr4 = 0, - .tpr5 = 0, - .emr1 = 0x4, - .emr2 = 0x10, - .emr3 = 0, -}; - -unsigned long sunxi_dram_init(void) -{ - return dramc_init(&dram_para); -} diff --git a/board/sunxi/dram_bananapi.c b/board/sunxi/dram_bananapi.c deleted file mode 100644 index 0ed7943043..0000000000 --- a/board/sunxi/dram_bananapi.c +++ /dev/null @@ -1,31 +0,0 @@ -/* this file is generated, don't edit it yourself */ - -#include <common.h> -#include <asm/arch/dram.h> - -static struct dram_para dram_para = { - .clock = 432, - .type = 3, - .rank_num = 1, - .density = 4096, - .io_width = 16, - .bus_width = 32, - .cas = 9, - .zq = 0x7f, - .odt_en = 0, - .size = 1024, - .tpr0 = 0x42d899b7, - .tpr1 = 0xa090, - .tpr2 = 0x22a00, - .tpr3 = 0x0, - .tpr4 = 0x1, - .tpr5 = 0x0, - .emr1 = 0x4, - .emr2 = 0x10, - .emr3 = 0x0, -}; - -unsigned long sunxi_dram_init(void) -{ - return dramc_init(&dram_para); -} diff --git a/board/sunxi/dram_cubieboard.c b/board/sunxi/dram_cubieboard.c deleted file mode 100644 index 399028ca96..0000000000 --- a/board/sunxi/dram_cubieboard.c +++ /dev/null @@ -1,31 +0,0 @@ -/* this file is generated, don't edit it yourself */ - -#include <common.h> -#include <asm/arch/dram.h> - -static struct dram_para dram_para = { - .clock = 480, - .type = 3, - .rank_num = 1, - .density = 4096, - .io_width = 16, - .bus_width = 32, - .cas = 6, - .zq = 123, - .odt_en = 0, - .size = 1024, - .tpr0 = 0x30926692, - .tpr1 = 0x1090, - .tpr2 = 0x1a0c8, - .tpr3 = 0, - .tpr4 = 0, - .tpr5 = 0, - .emr1 = 0, - .emr2 = 0, - .emr3 = 0, -}; - -unsigned long sunxi_dram_init(void) -{ - return dramc_init(&dram_para); -} diff --git a/board/sunxi/dram_cubieboard2.c b/board/sunxi/dram_cubieboard2.c deleted file mode 100644 index 9e753677c5..0000000000 --- a/board/sunxi/dram_cubieboard2.c +++ /dev/null @@ -1,31 +0,0 @@ -/* this file is generated, don't edit it yourself */ - -#include <common.h> -#include <asm/arch/dram.h> - -static struct dram_para dram_para = { - .clock = 480, - .type = 3, - .rank_num = 1, - .density = 4096, - .io_width = 16, - .bus_width = 32, - .cas = 9, - .zq = 0x7f, - .odt_en = 0, - .size = 1024, - .tpr0 = 0x42d899b7, - .tpr1 = 0xa090, - .tpr2 = 0x22a00, - .tpr3 = 0x0, - .tpr4 = 0x1, - .tpr5 = 0x0, - .emr1 = 0x4, - .emr2 = 0x10, - .emr3 = 0x0, -}; - -unsigned long sunxi_dram_init(void) -{ - return dramc_init(&dram_para); -} diff --git a/board/sunxi/dram_cubietruck.c b/board/sunxi/dram_cubietruck.c deleted file mode 100644 index fbcd68771f..0000000000 --- a/board/sunxi/dram_cubietruck.c +++ /dev/null @@ -1,31 +0,0 @@ -/* this file is generated, don't edit it yourself */ - -#include <common.h> -#include <asm/arch/dram.h> - -static struct dram_para dram_para = { - .clock = 432, - .type = 3, - .rank_num = 1, - .density = 4096, - .io_width = 8, - .bus_width = 32, - .cas = 9, - .zq = 0x7f, - .odt_en = 0, - .size = 2048, - .tpr0 = 0x42d899b7, - .tpr1 = 0xa090, - .tpr2 = 0x22a00, - .tpr3 = 0x0, - .tpr4 = 0x1, - .tpr5 = 0x0, - .emr1 = 0x4, - .emr2 = 0x10, - .emr3 = 0x0, -}; - -unsigned long sunxi_dram_init(void) -{ - return dramc_init(&dram_para); -} diff --git a/board/sunxi/dram_linksprite_pcduino3.c b/board/sunxi/dram_linksprite_pcduino3.c deleted file mode 100644 index 9cc6e19ee5..0000000000 --- a/board/sunxi/dram_linksprite_pcduino3.c +++ /dev/null @@ -1,31 +0,0 @@ -/* this file is generated, don't edit it yourself */ - -#include <common.h> -#include <asm/arch/dram.h> - -static struct dram_para dram_para = { - .clock = 480, - .type = 3, - .rank_num = 1, - .density = 4096, - .io_width = 16, - .bus_width = 32, - .cas = 9, - .zq = 0x7a, - .odt_en = 0, - .size = 1024, - .tpr0 = 0x42d899b7, - .tpr1 = 0xa090, - .tpr2 = 0x22a00, - .tpr3 = 0, - .tpr4 = 0, - .tpr5 = 0, - .emr1 = 0x4, - .emr2 = 0x10, - .emr3 = 0x0, -}; - -unsigned long sunxi_dram_init(void) -{ - return dramc_init(&dram_para); -} diff --git a/board/sunxi/dram_r7dongle.c b/board/sunxi/dram_r7dongle.c deleted file mode 100644 index 59343cb2a5..0000000000 --- a/board/sunxi/dram_r7dongle.c +++ /dev/null @@ -1,31 +0,0 @@ -/* this file is generated, don't edit it yourself */ - -#include <common.h> -#include <asm/arch/dram.h> - -static struct dram_para dram_para = { - .clock = 384, - .type = 3, - .rank_num = 1, - .density = 2048, - .io_width = 8, - .bus_width = 32, - .cas = 9, - .zq = 123, - .odt_en = 0, - .size = 1024, - .tpr0 = 0x42d899b7, - .tpr1 = 0xa090, - .tpr2 = 0x22a00, - .tpr3 = 0, - .tpr4 = 0, - .tpr5 = 0, - .emr1 = 0x04, - .emr2 = 0x10, - .emr3 = 0, -}; - -unsigned long sunxi_dram_init(void) -{ - return dramc_init(&dram_para); -} diff --git a/board/sunxi/dram_sun4i_360_1024_iow16.c b/board/sunxi/dram_sun4i_360_1024_iow16.c deleted file mode 100644 index 376371330d..0000000000 --- a/board/sunxi/dram_sun4i_360_1024_iow16.c +++ /dev/null @@ -1,31 +0,0 @@ -/* this file is generated, don't edit it yourself */ - -#include <common.h> -#include <asm/arch/dram.h> - -static struct dram_para dram_para = { - .clock = 360, - .type = 3, - .rank_num = 1, - .density = 4096, - .io_width = 16, - .bus_width = 32, - .cas = 6, - .zq = 123, - .odt_en = 0, - .size = 1024, - .tpr0 = 0x30926692, - .tpr1 = 0x1090, - .tpr2 = 0x1a0c8, - .tpr3 = 0, - .tpr4 = 0, - .tpr5 = 0, - .emr1 = 0, - .emr2 = 0, - .emr3 = 0, -}; - -unsigned long sunxi_dram_init(void) -{ - return dramc_init(&dram_para); -} diff --git a/board/sunxi/dram_sun4i_360_1024_iow8.c b/board/sunxi/dram_sun4i_360_1024_iow8.c deleted file mode 100644 index 2a5c9edd91..0000000000 --- a/board/sunxi/dram_sun4i_360_1024_iow8.c +++ /dev/null @@ -1,31 +0,0 @@ -/* this file is generated, don't edit it yourself */ - -#include <common.h> -#include <asm/arch/dram.h> - -static struct dram_para dram_para = { - .clock = 360, - .type = 3, - .rank_num = 1, - .density = 2048, - .io_width = 8, - .bus_width = 32, - .cas = 6, - .zq = 123, - .odt_en = 0, - .size = 1024, - .tpr0 = 0x30926692, - .tpr1 = 0x1090, - .tpr2 = 0x1a0c8, - .tpr3 = 0, - .tpr4 = 0, - .tpr5 = 0, - .emr1 = 0, - .emr2 = 0, - .emr3 = 0, -}; - -unsigned long sunxi_dram_init(void) -{ - return dramc_init(&dram_para); -} diff --git a/board/sunxi/dram_sun4i_360_512.c b/board/sunxi/dram_sun4i_360_512.c deleted file mode 100644 index 48aa6e2d63..0000000000 --- a/board/sunxi/dram_sun4i_360_512.c +++ /dev/null @@ -1,31 +0,0 @@ -/* this file is generated, don't edit it yourself */ - -#include <common.h> -#include <asm/arch/dram.h> - -static struct dram_para dram_para = { - .clock = 360, - .type = 3, - .rank_num = 1, - .density = 2048, - .io_width = 16, - .bus_width = 32, - .cas = 6, - .zq = 123, - .odt_en = 0, - .size = 512, - .tpr0 = 0x30926692, - .tpr1 = 0x1090, - .tpr2 = 0x1a0c8, - .tpr3 = 0, - .tpr4 = 0, - .tpr5 = 0, - .emr1 = 0, - .emr2 = 0, - .emr3 = 0, -}; - -unsigned long sunxi_dram_init(void) -{ - return dramc_init(&dram_para); -} diff --git a/board/sunxi/dram_sun4i_384_1024_iow8.c b/board/sunxi/dram_sun4i_384_1024_iow8.c deleted file mode 100644 index b0fcc55654..0000000000 --- a/board/sunxi/dram_sun4i_384_1024_iow8.c +++ /dev/null @@ -1,31 +0,0 @@ -/* this file is generated, don't edit it yourself */ - -#include <common.h> -#include <asm/arch/dram.h> - -static struct dram_para dram_para = { - .clock = 384, - .type = 3, - .rank_num = 1, - .density = 2048, - .io_width = 8, - .bus_width = 32, - .cas = 6, - .zq = 123, - .odt_en = 0, - .size = 1024, - .tpr0 = 0x30926692, - .tpr1 = 0x1090, - .tpr2 = 0x1a0c8, - .tpr3 = 0, - .tpr4 = 0, - .tpr5 = 0, - .emr1 = 0x4, - .emr2 = 0, - .emr3 = 0, -}; - -unsigned long sunxi_dram_init(void) -{ - return dramc_init(&dram_para); -} diff --git a/board/sunxi/dram_sun4i_408_1024_iow8.c b/board/sunxi/dram_sun4i_408_1024_iow8.c deleted file mode 100644 index c6d87d23d9..0000000000 --- a/board/sunxi/dram_sun4i_408_1024_iow8.c +++ /dev/null @@ -1,31 +0,0 @@ -/* this file is generated, don't edit it yourself */ - -#include <common.h> -#include <asm/arch/dram.h> - -static struct dram_para dram_para = { - .clock = 408, - .type = 3, - .rank_num = 1, - .density = 2048, - .io_width = 8, - .bus_width = 32, - .cas = 6, - .zq = 123, - .odt_en = 0, - .size = 1024, - .tpr0 = 0x30926692, - .tpr1 = 0x1090, - .tpr2 = 0x1a0c8, - .tpr3 = 0, - .tpr4 = 0, - .tpr5 = 0, - .emr1 = 0, - .emr2 = 0, - .emr3 = 0, -}; - -unsigned long sunxi_dram_init(void) -{ - return dramc_init(&dram_para); -} diff --git a/board/sunxi/dram_sun4i_auto.c b/board/sunxi/dram_sun4i_auto.c new file mode 100644 index 0000000000..09e0c9ae2e --- /dev/null +++ b/board/sunxi/dram_sun4i_auto.c @@ -0,0 +1,35 @@ +#include <common.h> +#include <asm/arch/dram.h> + +static struct dram_para dram_para = { + .clock = CONFIG_DRAM_CLK, + .type = 3, + .rank_num = 1, + .density = 0, + .io_width = 0, + .bus_width = 0, + .zq = CONFIG_DRAM_ZQ, + .odt_en = CONFIG_DRAM_ODT_EN, + .size = 0, +#ifdef CONFIG_DRAM_TIMINGS_VENDOR_MAGIC + .cas = 6, + .tpr0 = 0x30926692, + .tpr1 = 0x1090, + .tpr2 = 0x1a0c8, + .emr2 = 0, +#else +# include "dram_timings_sun4i.h" + .active_windowing = 1, +#endif + .tpr3 = CONFIG_DRAM_TPR3, + .tpr4 = 0, + .tpr5 = 0, + .emr1 = CONFIG_DRAM_EMR1, + .emr3 = 0, + .dqs_gating_delay = CONFIG_DRAM_DQS_GATING_DELAY, +}; + +unsigned long sunxi_dram_init(void) +{ + return dramc_init(&dram_para); +} diff --git a/board/sunxi/dram_sun5i_auto.c b/board/sunxi/dram_sun5i_auto.c new file mode 100644 index 0000000000..e52d54c32e --- /dev/null +++ b/board/sunxi/dram_sun5i_auto.c @@ -0,0 +1,38 @@ +/* DRAM parameters for auto dram configuration on sun5i and sun7i */ + +#include <common.h> +#include <asm/arch/dram.h> + +static struct dram_para dram_para = { + .clock = CONFIG_DRAM_CLK, + .mbus_clock = CONFIG_DRAM_MBUS_CLK, + .type = 3, + .rank_num = 1, + .density = 0, + .io_width = 0, + .bus_width = 0, + .zq = CONFIG_DRAM_ZQ, + .odt_en = CONFIG_DRAM_ODT_EN, + .size = 0, +#ifdef CONFIG_DRAM_TIMINGS_VENDOR_MAGIC + .cas = 9, + .tpr0 = 0x42d899b7, + .tpr1 = 0xa090, + .tpr2 = 0x22a00, + .emr2 = 0x10, +#else +# include "dram_timings_sun4i.h" + .active_windowing = 1, +#endif + .tpr3 = 0, + .tpr4 = 0, + .tpr5 = 0, + .emr1 = CONFIG_DRAM_EMR1, + .emr3 = 0, + .dqs_gating_delay = CONFIG_DRAM_DQS_GATING_DELAY, +}; + +unsigned long sunxi_dram_init(void) +{ + return dramc_init(&dram_para); +} diff --git a/board/sunxi/dram_sun7i_384_1024_iow16.c b/board/sunxi/dram_sun7i_384_1024_iow16.c deleted file mode 100644 index 04e4b1e9b9..0000000000 --- a/board/sunxi/dram_sun7i_384_1024_iow16.c +++ /dev/null @@ -1,31 +0,0 @@ -/* this file is generated, don't edit it yourself */ - -#include "common.h" -#include <asm/arch/dram.h> - -static struct dram_para dram_para = { - .clock = 384, - .type = 3, - .rank_num = 1, - .density = 4096, - .io_width = 16, - .bus_width = 32, - .cas = 9, - .zq = 0x7f, - .odt_en = 0, - .size = 1024, - .tpr0 = 0x42d899b7, - .tpr1 = 0xa090, - .tpr2 = 0x22a00, - .tpr3 = 0, - .tpr4 = 0, - .tpr5 = 0, - .emr1 = 0x4, - .emr2 = 0x10, - .emr3 = 0, -}; - -unsigned long sunxi_dram_init(void) -{ - return dramc_init(&dram_para); -} diff --git a/board/sunxi/dram_sun7i_384_512_busw16_iow16.c b/board/sunxi/dram_sun7i_384_512_busw16_iow16.c deleted file mode 100644 index 2e36011af5..0000000000 --- a/board/sunxi/dram_sun7i_384_512_busw16_iow16.c +++ /dev/null @@ -1,31 +0,0 @@ -/* this file is generated, don't edit it yourself */ - -#include "common.h" -#include <asm/arch/dram.h> - -static struct dram_para dram_para = { - .clock = 384, - .type = 3, - .rank_num = 1, - .density = 4096, - .io_width = 16, - .bus_width = 16, - .cas = 9, - .zq = 0x7f, - .odt_en = 0, - .size = 512, - .tpr0 = 0x42d899b7, - .tpr1 = 0xa090, - .tpr2 = 0x22a00, - .tpr3 = 0, - .tpr4 = 0, - .tpr5 = 0, - .emr1 = 0x4, - .emr2 = 0x10, - .emr3 = 0, -}; - -unsigned long sunxi_dram_init(void) -{ - return dramc_init(&dram_para); -} diff --git a/board/sunxi/dram_timings_sun4i.h b/board/sunxi/dram_timings_sun4i.h new file mode 100644 index 0000000000..29b934da63 --- /dev/null +++ b/board/sunxi/dram_timings_sun4i.h @@ -0,0 +1,205 @@ +/* This file is automatically generated, do not edit */ + +#if defined(CONFIG_DRAM_TIMINGS_DDR3_1066F_1333H) +# if CONFIG_DRAM_CLK <= 360 /* DDR3-1066F @360MHz, timings: 6-5-5-14 */ + .cas = 6, + .tpr0 = 0x268e5590, + .tpr1 = 0xa090, + .tpr2 = 0x22a00, + .emr2 = 0x0, +# elif CONFIG_DRAM_CLK <= 384 /* DDR3-1066F @384MHz, timings: 6-6-6-15 */ + .cas = 6, + .tpr0 = 0x288f6690, + .tpr1 = 0xa0a0, + .tpr2 = 0x22a00, + .emr2 = 0x0, +# elif CONFIG_DRAM_CLK <= 396 /* DDR3-1066F @396MHz, timings: 6-6-6-15 */ + .cas = 6, + .tpr0 = 0x2a8f6690, + .tpr1 = 0xa0a0, + .tpr2 = 0x22a00, + .emr2 = 0x0, +# elif CONFIG_DRAM_CLK <= 408 /* DDR3-1066F @408MHz, timings: 7-6-6-16 */ + .cas = 7, + .tpr0 = 0x2ab06690, + .tpr1 = 0xa0a8, + .tpr2 = 0x22a00, + .emr2 = 0x8, +# elif CONFIG_DRAM_CLK <= 432 /* DDR3-1066F @432MHz, timings: 7-6-6-17 */ + .cas = 7, + .tpr0 = 0x2cb16690, + .tpr1 = 0xa0b0, + .tpr2 = 0x22e00, + .emr2 = 0x8, +# elif CONFIG_DRAM_CLK <= 456 /* DDR3-1066F @456MHz, timings: 7-6-6-18 */ + .cas = 7, + .tpr0 = 0x30b26690, + .tpr1 = 0xa0b8, + .tpr2 = 0x22e00, + .emr2 = 0x8, +# elif CONFIG_DRAM_CLK <= 468 /* DDR3-1066F @468MHz, timings: 7-7-7-18 */ + .cas = 7, + .tpr0 = 0x30b27790, + .tpr1 = 0xa0c0, + .tpr2 = 0x23200, + .emr2 = 0x8, +# elif CONFIG_DRAM_CLK <= 480 /* DDR3-1066F @480MHz, timings: 7-7-7-18 */ + .cas = 7, + .tpr0 = 0x32b27790, + .tpr1 = 0xa0c0, + .tpr2 = 0x23200, + .emr2 = 0x8, +# elif CONFIG_DRAM_CLK <= 504 /* DDR3-1066F @504MHz, timings: 7-7-7-19 */ + .cas = 7, + .tpr0 = 0x34d37790, + .tpr1 = 0xa0d0, + .tpr2 = 0x23600, + .emr2 = 0x8, +# elif CONFIG_DRAM_CLK <= 528 /* DDR3-1066F @528MHz, timings: 7-7-7-20 */ + .cas = 7, + .tpr0 = 0x36d47790, + .tpr1 = 0xa0d8, + .tpr2 = 0x23600, + .emr2 = 0x8, +# elif CONFIG_DRAM_CLK <= 540 /* DDR3-1333H @540MHz, timings: 9-8-8-20 */ + .cas = 9, + .tpr0 = 0x36b488b4, + .tpr1 = 0xa0c8, + .tpr2 = 0x2b600, + .emr2 = 0x10, +# elif CONFIG_DRAM_CLK <= 552 /* DDR3-1333H @552MHz, timings: 9-8-8-20 */ + .cas = 9, + .tpr0 = 0x38b488b4, + .tpr1 = 0xa0c8, + .tpr2 = 0x2ba00, + .emr2 = 0x10, +# elif CONFIG_DRAM_CLK <= 576 /* DDR3-1333H @576MHz, timings: 9-8-8-21 */ + .cas = 9, + .tpr0 = 0x3ab588b4, + .tpr1 = 0xa0d0, + .tpr2 = 0x2ba00, + .emr2 = 0x10, +# elif CONFIG_DRAM_CLK <= 600 /* DDR3-1333H @600MHz, timings: 9-9-9-22 */ + .cas = 9, + .tpr0 = 0x3cb699b4, + .tpr1 = 0xa0d8, + .tpr2 = 0x2be00, + .emr2 = 0x10, +# elif CONFIG_DRAM_CLK <= 624 /* DDR3-1333H @624MHz, timings: 9-9-9-23 */ + .cas = 9, + .tpr0 = 0x3eb799b4, + .tpr1 = 0xa0e8, + .tpr2 = 0x2be00, + .emr2 = 0x10, +# elif CONFIG_DRAM_CLK <= 648 /* DDR3-1333H @648MHz, timings: 9-9-9-24 */ + .cas = 9, + .tpr0 = 0x42b899b4, + .tpr1 = 0xa0f0, + .tpr2 = 0x2c200, + .emr2 = 0x10, +# else +# error CONFIG_DRAM_CLK is set too high +# endif +#elif defined(CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J) +# if CONFIG_DRAM_CLK <= 360 /* DDR3-800E @360MHz, timings: 6-6-6-14 */ + .cas = 6, + .tpr0 = 0x268e6690, + .tpr1 = 0xa090, + .tpr2 = 0x22a00, + .emr2 = 0x0, +# elif CONFIG_DRAM_CLK <= 384 /* DDR3-800E @384MHz, timings: 6-6-6-15 */ + .cas = 6, + .tpr0 = 0x2a8f6690, + .tpr1 = 0xa0a0, + .tpr2 = 0x22a00, + .emr2 = 0x0, +# elif CONFIG_DRAM_CLK <= 396 /* DDR3-800E @396MHz, timings: 6-6-6-15 */ + .cas = 6, + .tpr0 = 0x2a8f6690, + .tpr1 = 0xa0a0, + .tpr2 = 0x22a00, + .emr2 = 0x0, +# elif CONFIG_DRAM_CLK <= 408 /* DDR3-1066G @408MHz, timings: 8-7-7-16 */ + .cas = 8, + .tpr0 = 0x2cb07790, + .tpr1 = 0xa0a8, + .tpr2 = 0x22a00, + .emr2 = 0x8, +# elif CONFIG_DRAM_CLK <= 432 /* DDR3-1066G @432MHz, timings: 8-7-7-17 */ + .cas = 8, + .tpr0 = 0x2eb17790, + .tpr1 = 0xa0b0, + .tpr2 = 0x22e00, + .emr2 = 0x8, +# elif CONFIG_DRAM_CLK <= 456 /* DDR3-1066G @456MHz, timings: 8-7-7-18 */ + .cas = 8, + .tpr0 = 0x30b27790, + .tpr1 = 0xa0b8, + .tpr2 = 0x22e00, + .emr2 = 0x8, +# elif CONFIG_DRAM_CLK <= 468 /* DDR3-1066G @468MHz, timings: 8-8-8-18 */ + .cas = 8, + .tpr0 = 0x32b28890, + .tpr1 = 0xa0c0, + .tpr2 = 0x23200, + .emr2 = 0x8, +# elif CONFIG_DRAM_CLK <= 480 /* DDR3-1066G @480MHz, timings: 8-8-8-18 */ + .cas = 8, + .tpr0 = 0x34b28890, + .tpr1 = 0xa0c0, + .tpr2 = 0x23200, + .emr2 = 0x8, +# elif CONFIG_DRAM_CLK <= 504 /* DDR3-1066G @504MHz, timings: 8-8-8-19 */ + .cas = 8, + .tpr0 = 0x36d38890, + .tpr1 = 0xa0d0, + .tpr2 = 0x23600, + .emr2 = 0x8, +# elif CONFIG_DRAM_CLK <= 528 /* DDR3-1066G @528MHz, timings: 8-8-8-20 */ + .cas = 8, + .tpr0 = 0x38d48890, + .tpr1 = 0xa0d8, + .tpr2 = 0x23600, + .emr2 = 0x8, +# elif CONFIG_DRAM_CLK <= 540 /* DDR3-1333J @540MHz, timings: 10-9-9-20 */ + .cas = 10, + .tpr0 = 0x38b499b4, + .tpr1 = 0xa0c8, + .tpr2 = 0x2b600, + .emr2 = 0x10, +# elif CONFIG_DRAM_CLK <= 552 /* DDR3-1333J @552MHz, timings: 10-9-9-20 */ + .cas = 10, + .tpr0 = 0x3ab499b4, + .tpr1 = 0xa0c8, + .tpr2 = 0x2ba00, + .emr2 = 0x10, +# elif CONFIG_DRAM_CLK <= 576 /* DDR3-1333J @576MHz, timings: 10-9-9-21 */ + .cas = 10, + .tpr0 = 0x3cb599b4, + .tpr1 = 0xa0d0, + .tpr2 = 0x2ba00, + .emr2 = 0x10, +# elif CONFIG_DRAM_CLK <= 600 /* DDR3-1333J @600MHz, timings: 10-9-9-22 */ + .cas = 10, + .tpr0 = 0x3eb699b4, + .tpr1 = 0xa0d8, + .tpr2 = 0x2be00, + .emr2 = 0x10, +# elif CONFIG_DRAM_CLK <= 624 /* DDR3-1333J @624MHz, timings: 10-10-10-23 */ + .cas = 10, + .tpr0 = 0x40b7aab4, + .tpr1 = 0xa0e8, + .tpr2 = 0x2be00, + .emr2 = 0x10, +# elif CONFIG_DRAM_CLK <= 648 /* DDR3-1333J @648MHz, timings: 10-10-10-24 */ + .cas = 10, + .tpr0 = 0x44b8aab4, + .tpr1 = 0xa0f0, + .tpr2 = 0x2c200, + .emr2 = 0x10, +# else +# error CONFIG_DRAM_CLK is set too high +# endif +#else +# error CONFIG_DRAM_TIMINGS_* is not defined +#endif diff --git a/board/sunxi/gmac.c b/board/sunxi/gmac.c index 4e4615e12f..8849132627 100644 --- a/board/sunxi/gmac.c +++ b/board/sunxi/gmac.c @@ -24,20 +24,13 @@ int sunxi_gmac_initialize(bd_t *bis) #ifdef CONFIG_RGMII setbits_le32(&ccm->gmac_clk_cfg, CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII | CCM_GMAC_CTRL_GPIT_RGMII); + setbits_le32(&ccm->gmac_clk_cfg, + CCM_GMAC_CTRL_TX_CLK_DELAY(CONFIG_GMAC_TX_DELAY)); #else setbits_le32(&ccm->gmac_clk_cfg, CCM_GMAC_CTRL_TX_CLK_SRC_MII | CCM_GMAC_CTRL_GPIT_MII); #endif - /* - * In order for the gmac nic to work reliable on the Bananapi, we - * need to set bits 10-12 GTXDC "GMAC Transmit Clock Delay Chain" - * of the GMAC clk register to 3. - */ -#if defined CONFIG_TARGET_BANANAPI || defined CONFIG_TARGET_BANANAPRO - setbits_le32(&ccm->gmac_clk_cfg, 0x3 << 10); -#endif - #ifndef CONFIG_MACH_SUN6I /* Configure pin mux settings for GMAC */ for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(16); pin++) { |
