diff options
Diffstat (limited to 'board/spd8xx/spd8xx.c')
| -rw-r--r-- | board/spd8xx/spd8xx.c | 42 |
1 files changed, 21 insertions, 21 deletions
diff --git a/board/spd8xx/spd8xx.c b/board/spd8xx/spd8xx.c index 6387f8a65c..9e9678d62f 100644 --- a/board/spd8xx/spd8xx.c +++ b/board/spd8xx/spd8xx.c @@ -145,7 +145,7 @@ int checkboard (void) phys_size_t initdram (int board_type) { - volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; long int size_b0; @@ -153,23 +153,23 @@ phys_size_t initdram (int board_type) /* * Map controller bank 2 to the SRAM bank at preliminary address. */ - memctl->memc_or2 = CFG_OR2; - memctl->memc_br2 = CFG_BR2; + memctl->memc_or2 = CONFIG_SYS_OR2; + memctl->memc_br2 = CONFIG_SYS_BR2; #endif /* * Map controller bank 4 to the PER8 bank. */ - memctl->memc_or4 = CFG_OR4; - memctl->memc_br4 = CFG_BR4; + memctl->memc_or4 = CONFIG_SYS_OR4; + memctl->memc_br4 = CONFIG_SYS_BR4; #if 0 /* Configure SHARC at UMA */ upmconfig (UPMA, (uint *) sharc_table, sizeof (sharc_table) / sizeof (uint)); /* Map controller bank 5 to the SHARC */ - memctl->memc_or5 = CFG_OR5; - memctl->memc_br5 = CFG_BR5; + memctl->memc_or5 = CONFIG_SYS_OR5; + memctl->memc_br5 = CONFIG_SYS_BR5; #endif memctl->memc_mamr = 0x00001000; @@ -178,17 +178,17 @@ phys_size_t initdram (int board_type) upmconfig (UPMB, (uint *) sdram_table, sizeof (sdram_table) / sizeof (uint)); - memctl->memc_mptpr = CFG_MPTPR_1BK_8K; + memctl->memc_mptpr = CONFIG_SYS_MPTPR_1BK_8K; memctl->memc_mar = 0x00000088; /* * Map controller bank 3 to the SDRAM bank at preliminary address. */ - memctl->memc_or3 = CFG_OR3_PRELIM; - memctl->memc_br3 = CFG_BR3_PRELIM; + memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM; + memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM; - memctl->memc_mbmr = CFG_MBMR_8COL; /* refresh not enabled yet */ + memctl->memc_mbmr = CONFIG_SYS_MBMR_8COL; /* refresh not enabled yet */ udelay (200); memctl->memc_mcr = 0x80806105; @@ -205,10 +205,10 @@ phys_size_t initdram (int board_type) * Check Bank 0 Memory Size for re-configuration */ size_b0 = - dram_size (CFG_MBMR_8COL, SDRAM_BASE3_PRELIM, + dram_size (CONFIG_SYS_MBMR_8COL, SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE); - memctl->memc_mbmr = CFG_MBMR_8COL | MBMR_PTBE; + memctl->memc_mbmr = CONFIG_SYS_MBMR_8COL | MBMR_PTBE; return (size_b0); } @@ -226,7 +226,7 @@ phys_size_t initdram (int board_type) static long int dram_size (long int mamr_value, long int *base, long int maxsize) { - volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; memctl->memc_mbmr = mamr_value; @@ -238,7 +238,7 @@ static long int dram_size (long int mamr_value, long int *base, void reset_phy (void) { - immap_t *immr = (immap_t *) CFG_IMMR; + immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; ushort sreg; /* Configure extra port pins for NS DP83843 PHY */ @@ -274,21 +274,21 @@ void reset_phy (void) void ide_set_reset (int on) { - volatile immap_t *immr = (immap_t *) CFG_IMMR; + volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; /* * Configure PC for IDE Reset Pin */ if (on) { /* assert RESET */ - immr->im_ioport.iop_pcdat &= ~(CFG_PC_IDE_RESET); + immr->im_ioport.iop_pcdat &= ~(CONFIG_SYS_PC_IDE_RESET); } else { /* release RESET */ - immr->im_ioport.iop_pcdat |= CFG_PC_IDE_RESET; + immr->im_ioport.iop_pcdat |= CONFIG_SYS_PC_IDE_RESET; } /* program port pin as GPIO output */ - immr->im_ioport.iop_pcpar &= ~(CFG_PC_IDE_RESET); - immr->im_ioport.iop_pcso &= ~(CFG_PC_IDE_RESET); - immr->im_ioport.iop_pcdir |= CFG_PC_IDE_RESET; + immr->im_ioport.iop_pcpar &= ~(CONFIG_SYS_PC_IDE_RESET); + immr->im_ioport.iop_pcso &= ~(CONFIG_SYS_PC_IDE_RESET); + immr->im_ioport.iop_pcdir |= CONFIG_SYS_PC_IDE_RESET; } /* ------------------------------------------------------------------------- */ |
