summaryrefslogtreecommitdiffstats
path: root/board/prodrive/p3mx/sdram_init.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/prodrive/p3mx/sdram_init.c')
-rw-r--r--board/prodrive/p3mx/sdram_init.c418
1 files changed, 0 insertions, 418 deletions
diff --git a/board/prodrive/p3mx/sdram_init.c b/board/prodrive/p3mx/sdram_init.c
deleted file mode 100644
index 4220930bc5..0000000000
--- a/board/prodrive/p3mx/sdram_init.c
+++ /dev/null
@@ -1,418 +0,0 @@
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*************************************************************************
- * adaption for the Marvell DB64460 Board
- * Ingo Assmus (ingo.assmus@keymile.com)
- *************************************************************************/
-
-/* sdram_init.c - automatic memory sizing */
-
-#include <common.h>
-#include <74xx_7xx.h>
-#include "../../Marvell/include/memory.h"
-#include "../../Marvell/include/pci.h"
-#include "../../Marvell/include/mv_gen_reg.h"
-#include <net.h>
-
-#include "eth.h"
-#include "mpsc.h"
-#include "../../Marvell/common/i2c.h"
-#include "64460.h"
-#include "mv_regs.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#undef DEBUG
-#define MAP_PCI
-
-#ifdef DEBUG
-#define DP(x) x
-#else
-#define DP(x)
-#endif
-
-int set_dfcdlInit (void); /* setup delay line of Mv64460 */
-int mvDmaIsChannelActive (int);
-int mvDmaSetMemorySpace (ulong, ulong, ulong, ulong, ulong);
-int mvDmaTransfer (int, ulong, ulong, ulong, ulong);
-
-#define D_CACHE_FLUSH_LINE(addr, offset) \
- { \
- __asm__ __volatile__ ("dcbf %0,%1" : : "r" (addr), "r" (offset)); \
- }
-
-int memory_map_bank (unsigned int bankNo,
- unsigned int bankBase, unsigned int bankLength)
-{
-#if defined (MAP_PCI) && defined (CONFIG_PCI)
- PCI_HOST host;
-#endif
-
-#ifdef DEBUG
- if (bankLength > 0) {
- printf ("mapping bank %d at %08x - %08x\n",
- bankNo, bankBase, bankBase + bankLength - 1);
- } else {
- printf ("unmapping bank %d\n", bankNo);
- }
-#endif
-
- memoryMapBank (bankNo, bankBase, bankLength);
-
-#if defined (MAP_PCI) && defined (CONFIG_PCI)
- for (host = PCI_HOST0; host <= PCI_HOST1; host++) {
- const int features =
- PREFETCH_ENABLE |
- DELAYED_READ_ENABLE |
- AGGRESSIVE_PREFETCH |
- READ_LINE_AGGRESSIVE_PREFETCH |
- READ_MULTI_AGGRESSIVE_PREFETCH |
- MAX_BURST_4 | PCI_NO_SWAP;
-
- pciMapMemoryBank (host, bankNo, bankBase, bankLength);
-
- pciSetRegionSnoopMode (host, bankNo, PCI_SNOOP_WB, bankBase,
- bankLength);
-
- pciSetRegionFeatures (host, bankNo, features, bankBase,
- bankLength);
- }
-#endif
-
- return 0;
-}
-
-/*
- * Check memory range for valid RAM. A simple memory test determines
- * the actually available RAM size between addresses `base' and
- * `base + maxsize'. Some (not all) hardware errors are detected:
- * - short between address lines
- * - short between data lines
- */
-long int dram_size (long int *base, long int maxsize)
-{
- volatile long int *addr, *b = base;
- long int cnt, val, save1, save2;
-
-#define STARTVAL (1<<20) /* start test at 1M */
- for (cnt = STARTVAL / sizeof (long); cnt < maxsize / sizeof (long);
- cnt <<= 1) {
- addr = base + cnt; /* pointer arith! */
-
- save1 = *addr; /* save contents of addr */
- save2 = *b; /* save contents of base */
-
- *addr = cnt; /* write cnt to addr */
- *b = 0; /* put null at base */
-
- /* check at base address */
- if ((*b) != 0) {
- *addr = save1; /* restore *addr */
- *b = save2; /* restore *b */
- return (0);
- }
- val = *addr; /* read *addr */
- val = *addr; /* read *addr */
-
- *addr = save1;
- *b = save2;
-
- if (val != cnt) {
- DP (printf
- ("Found %08x at Address %08x (failure)\n",
- (unsigned int) val, (unsigned int) addr));
- /* fix boundary condition.. STARTVAL means zero */
- if (cnt == STARTVAL / sizeof (long))
- cnt = 0;
- return (cnt * sizeof (long));
- }
- }
-
- return maxsize;
-}
-
-#define SDRAM_NORMAL 0x0
-#define SDRAM_PRECHARGE_ALL 0x1
-#define SDRAM_REFRESH_ALL 0x2
-#define SDRAM_MODE_REG_SETUP 0x3
-#define SDRAM_XTEN_MODE_REG_SETUP 0x4
-#define SDRAM_NOP 0x5
-#define SDRAM_SELF_REFRESH 0x7
-
-phys_size_t initdram (int board_type)
-{
- int tmp;
- int start;
- ulong size;
- ulong memSpaceAttr;
- ulong dest;
-
- /* first disable all banks */
- memory_map_bank(0, 0, 0);
- memory_map_bank(1, 0, 0);
- memory_map_bank(2, 0, 0);
- memory_map_bank(3, 0, 0);
-
- /* calibrate delay lines */
- set_dfcdlInit();
-
- GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_NOP); /* 0x1418 */
- do {
- tmp = GTREGREAD(MV64460_SDRAM_OPERATION);
- } while(tmp != 0x0);
-
- /* SDRAM controller configuration */
-#ifdef CONFIG_MV64460_ECC
- GT_REG_WRITE(MV64460_SDRAM_CONFIG, 0x58201400); /* 0x1400 */
-#else
- GT_REG_WRITE(MV64460_SDRAM_CONFIG, 0x58200400); /* 0x1400 */
-#endif
- GT_REG_WRITE(MV64460_D_UNIT_CONTROL_LOW, 0xC3000540); /* 0x1404 */
- GT_REG_WRITE(MV64460_D_UNIT_CONTROL_HIGH, 0x0300F777); /* 0x1424 */
- GT_REG_WRITE(MV64460_SDRAM_TIMING_CONTROL_LOW, 0x01712220); /* 0x1408 */
- GT_REG_WRITE(MV64460_SDRAM_TIMING_CONTROL_HIGH, 0x0000005D); /* 0x140C */
- GT_REG_WRITE(MV64460_SDRAM_ADDR_CONTROL, 0x00000012); /* 0x1410 */
- GT_REG_WRITE(MV64460_SDRAM_OPEN_PAGES_CONTROL, 0x00000001); /* 0x1414 */
-
- /* SDRAM drive strength */
- GT_REG_WRITE(MV64460_SDRAM_ADDR_CTRL_PADS_CALIBRATION, 0x80000000); /* 0x14C0 */
- GT_REG_WRITE(MV64460_SDRAM_ADDR_CTRL_PADS_CALIBRATION, 0x80000008); /* 0x14C0 */
- GT_REG_WRITE(MV64460_SDRAM_DATA_PADS_CALIBRATION, 0x80000000); /* 0x14C4 */
- GT_REG_WRITE(MV64460_SDRAM_DATA_PADS_CALIBRATION, 0x80000008); /* 0x14C4 */
-
- /* setup SDRAM device registers */
-
- /* precharge all */
- GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_PRECHARGE_ALL); /* 0x1418 */
- do {
- tmp = GTREGREAD(MV64460_SDRAM_OPERATION);
- } while(tmp != 0x0);
-
- /* enable DLL */
- GT_REG_WRITE(MV64460_EXTENDED_DRAM_MODE, 0x00000000); /* 0x1420 */
- GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_XTEN_MODE_REG_SETUP); /* 0x1418 */
- do {
- tmp = GTREGREAD(MV64460_SDRAM_OPERATION);
- } while(tmp != 0x0);
-
- /* reset DLL */
- GT_REG_WRITE(MV64460_SDRAM_MODE, 0x00000132); /* 0x141C */
- GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_MODE_REG_SETUP); /* 0x1418 */
- do {
- tmp = GTREGREAD(MV64460_SDRAM_OPERATION);
- } while(tmp != 0x0);
-
- /* precharge all */
- GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_PRECHARGE_ALL); /* 0x1418 */
- do {
- tmp = GTREGREAD(MV64460_SDRAM_OPERATION);
- } while(tmp != 0x0);
-
- /* wait for 2 auto refresh commands */
- udelay(20);
-
- /* un-reset DLL */
- GT_REG_WRITE(MV64460_SDRAM_MODE, 0x00000032); /* 0x141C */
- GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_MODE_REG_SETUP); /* 0x1418 */
- do {
- tmp = GTREGREAD(MV64460_SDRAM_OPERATION);
- } while(tmp != 0x0);
-
- /* wait 200 cycles */
- udelay(2); /* FIXME make this dynamic for the system clock */
-
- /* SDRAM init done */
- memory_map_bank(0, CONFIG_SYS_SDRAM_BASE, (256 << 20));
-#ifdef CONFIG_SYS_SDRAM1_BASE
- memory_map_bank(1, CONFIG_SYS_SDRAM1_BASE, (256 << 20));
-#endif
-
- /* DUNIT_MMASK: enable SnoopHitEn bit to avoid errata CPU-#4
- */
- tmp = GTREGREAD(MV64460_D_UNIT_MMASK); /* 0x14B0 */
- GT_REG_WRITE(MV64460_D_UNIT_MMASK, tmp | 0x2);
-
- start = (0 << 20);
-#ifdef CONFIG_P3M750
- size = (512 << 20);
-#elif defined (CONFIG_P3M7448)
- size = (128 << 20);
-#endif
-
-#ifdef CONFIG_MV64460_ECC
- memSpaceAttr = ((~(BIT0 << 0)) & 0xf) << 8;
- mvDmaSetMemorySpace (0, 0, memSpaceAttr, start, size);
- for (dest = start; dest < start + size; dest += _8M) {
- mvDmaTransfer (0, start, dest, _8M,
- BIT8 /*DMA_DTL_128BYTES */ |
- BIT3 /*DMA_HOLD_SOURCE_ADDR */ |
- BIT11 /*DMA_BLOCK_TRANSFER_MODE */ );
- while (mvDmaIsChannelActive (0));
- }
-#endif
-
- return (size);
-}
-
-void board_add_ram_info(int use_default)
-{
- u32 val;
-
- puts(" (CL=");
- switch ((GTREGREAD(MV64460_SDRAM_MODE) >> 4) & 0x7) {
- case 0x2:
- puts("2");
- break;
- case 0x3:
- puts("3");
- break;
- case 0x5:
- puts("1.5");
- break;
- case 0x6:
- puts("2.5");
- break;
- }
-
- val = GTREGREAD(MV64460_SDRAM_CONFIG);
-
- puts(", ECC ");
- if (val & 0x00001000)
- puts("enabled)");
- else
- puts("not enabled)");
-}
-
-/*
- * mvDmaIsChannelActive - Check if IDMA channel is active
- *
- * channel = IDMA channel number from 0 to 7
- */
-int mvDmaIsChannelActive (int channel)
-{
- ulong data;
-
- data = GTREGREAD (MV64460_DMA_CHANNEL0_CONTROL + 4 * channel);
- if (data & BIT14) /* activity status */
- return 1;
-
- return 0;
-}
-
-/*
- * mvDmaSetMemorySpace - Set a DMA memory window for the DMA's address decoding
- * map.
- *
- * memSpace = IDMA memory window number from 0 to 7
- * trg_if = Target interface:
- * 0x0 DRAM
- * 0x1 Device Bus
- * 0x2 Integrated SDRAM (or CPU bus 60x only)
- * 0x3 PCI0
- * 0x4 PCI1
- * attr = IDMA attributes (see MV datasheet)
- * base_addr = Sets up memory window for transfers
- *
- */
-int mvDmaSetMemorySpace (ulong memSpace,
- ulong trg_if,
- ulong attr, ulong base_addr, ulong size)
-{
- ulong temp;
-
- /* The base address must be aligned to the size. */
- if (base_addr % size != 0)
- return 0;
-
- if (size >= 0x10000) { /* 64K */
- size &= 0xffff0000;
- base_addr = (base_addr & 0xffff0000);
- /* Set the new attributes */
- GT_REG_WRITE (MV64460_DMA_BASE_ADDR_REG0 + memSpace * 8,
- (base_addr | trg_if | attr));
- GT_REG_WRITE ((MV64460_DMA_SIZE_REG0 + memSpace * 8),
- (size - 1) & 0xffff0000);
- temp = GTREGREAD (MV64460_DMA_BASE_ADDR_ENABLE_REG);
- GT_REG_WRITE (DMA_BASE_ADDR_ENABLE_REG,
- (temp & ~(BIT0 << memSpace)));
- return 1;
- }
-
- return 0;
-}
-
-/*
- * mvDmaTransfer - Transfer data from src_addr to dst_addr on one of the 4
- * DMA channels.
- *
- * channel = IDMA channel number from 0 to 3
- * destAddr = Destination address
- * sourceAddr = Source address
- * size = Size in bytes
- * command = See MV datasheet
- *
- */
-int mvDmaTransfer (int channel, ulong sourceAddr,
- ulong destAddr, ulong size, ulong command)
-{
- ulong engOffReg = 0; /* Engine Offset Register */
-
- if (size > 0xffff)
- command = command | BIT31; /* DMA_16M_DESCRIPTOR_MODE */
- command = command | ((command >> 6) & 0x7);
- engOffReg = channel * 4;
- GT_REG_WRITE (MV64460_DMA_CHANNEL0_BYTE_COUNT + engOffReg, size);
- GT_REG_WRITE (MV64460_DMA_CHANNEL0_SOURCE_ADDR + engOffReg, sourceAddr);
- GT_REG_WRITE (MV64460_DMA_CHANNEL0_DESTINATION_ADDR + engOffReg, destAddr);
- command = command |
- BIT12 | /* DMA_CHANNEL_ENABLE */
- BIT9; /* DMA_NON_CHAIN_MODE */
- /* Activate DMA channel By writting to mvDmaControlRegister */
- GT_REG_WRITE (MV64460_DMA_CHANNEL0_CONTROL + engOffReg, command);
- return 1;
-}
-
-/****************************************************************************************
- * SDRAM INIT *
- * This procedure detect all Sdram types: 64, 128, 256, 512 Mbit, 1Gbit and 2Gb *
- * This procedure fits only the Atlantis *
- * *
- ***************************************************************************************/
-
-/****************************************************************************************
- * DFCDL initialize MV643xx Design Considerations *
- * *
- ***************************************************************************************/
-int set_dfcdlInit (void)
-{
- int i;
-
- /* Values from MV64460 User Manual */
- unsigned int dfcdl_tbl[] = { 0x00000000, 0x00000001, 0x00000042, 0x00000083,
- 0x000000c4, 0x00000105, 0x00000146, 0x00000187,
- 0x000001c8, 0x00000209, 0x0000024a, 0x0000028b,
- 0x000002cc, 0x0000030d, 0x0000034e, 0x0000038f,
- 0x000003d0, 0x00000411, 0x00000452, 0x00000493,
- 0x000004d4, 0x00000515, 0x00000556, 0x00000597,
- 0x000005d8, 0x00000619, 0x0000065a, 0x0000069b,
- 0x000006dc, 0x0000071d, 0x0000075e, 0x0000079f,
- 0x000007e0, 0x00000821, 0x00000862, 0x000008a3,
- 0x000008e4, 0x00000925, 0x00000966, 0x000009a7,
- 0x000009e8, 0x00000a29, 0x00000a6a, 0x00000aab,
- 0x00000aec, 0x00000b2d, 0x00000b6e, 0x00000baf,
- 0x00000bf0, 0x00000c31, 0x00000c72, 0x00000cb3,
- 0x00000cf4, 0x00000d35, 0x00000d76, 0x00000db7,
- 0x00000df8, 0x00000e39, 0x00000e7a, 0x00000ebb,
- 0x00000efc, 0x00000f3d, 0x00000f7e, 0x00000fbf };
-
- for (i = 0; i < 64; i++)
- GT_REG_WRITE (SRAM_DATA0, dfcdl_tbl[i]);
- GT_REG_WRITE (DFCDL_CONFIG0, 0x00300000); /* enable dynamic delay line updating */
-
- return (0);
-}
OpenPOWER on IntegriCloud