summaryrefslogtreecommitdiffstats
path: root/board/netstal/hcu5/sdram.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/netstal/hcu5/sdram.c')
-rw-r--r--board/netstal/hcu5/sdram.c17
1 files changed, 12 insertions, 5 deletions
diff --git a/board/netstal/hcu5/sdram.c b/board/netstal/hcu5/sdram.c
index 40391958d2..9ee9ab599b 100644
--- a/board/netstal/hcu5/sdram.c
+++ b/board/netstal/hcu5/sdram.c
@@ -36,7 +36,7 @@
#include <asm/mmu.h>
#include <ppc440.h>
-void sysLedSet(u32 value);
+void hcu_led_set(u32 value);
void dcbz_area(u32 start_address, u32 num_bytes);
void dflush(void);
@@ -70,7 +70,6 @@ void dflush(void);
void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value);
-#ifdef CONFIG_ADD_RAM_INFO
void board_add_ram_info(int use_default)
{
PPC440_SYS_INFO board_cfg;
@@ -99,7 +98,6 @@ void board_add_ram_info(int use_default)
val = DDR0_03_CASLAT_DECODE(val);
printf(", CL%d)", val);
}
-#endif
/*--------------------------------------------------------------------
* wait_for_dlllock.
@@ -138,7 +136,7 @@ static int wait_for_dlllock(void)
void sdram_panic(const char *reason)
{
printf("\n%s: reason %s", __FUNCTION__, reason);
- sysLedSet(0xff);
+ hcu_led_set(0xff);
while (1) {
}
/* Never return */
@@ -197,6 +195,13 @@ static void program_ecc(unsigned long start_address, unsigned long num_bytes,
mfsdram(DDR0_00, val);
mtsdram(DDR0_00, val | DDR0_00_INT_ACK_ALL);
+ /*
+ * Clear possible errors
+ * If not done, then we could get an interrupt later on when
+ * exceptions are enabled.
+ */
+ mtspr(mcsr, mfspr(mcsr));
+
/* Set 'int_mask' parameter to functionnal value */
mfsdram(DDR0_01, val);
mtsdram(DDR0_01, ((val &~ DDR0_01_INT_MASK_MASK) |
@@ -244,7 +249,6 @@ long int initdram (int board_type)
sdram_panic(INVALID_HW_CONFIG);
break;
}
- dram_size -= 16 * 1024 * 1024;
mtsdram(DDR0_07, 0x00090100);
/*
* TCPD=200 cycles of clock input is required to lock the DLL.
@@ -283,6 +287,7 @@ long int initdram (int board_type)
/*
* Program tlb entries for this size (dynamic)
*/
+ remove_tlb(CFG_SDRAM_BASE, 256 << 20);
program_tlb(0, 0, dram_size, MY_TLB_WORD2_I_ENABLE);
/*
@@ -291,6 +296,8 @@ long int initdram (int board_type)
*/
program_tlb(0, CFG_DDR_CACHED_ADDR, dram_size, 0);
+ /* Diminish RAM to initialize */
+ dram_size = dram_size - 32 ;
#ifdef CONFIG_DDR_ECC
/*
* If ECC is enabled, initialize the parity bits.
OpenPOWER on IntegriCloud