diff options
Diffstat (limited to 'board/lpc2292sodimm/flash.c')
| -rw-r--r-- | board/lpc2292sodimm/flash.c | 477 |
1 files changed, 477 insertions, 0 deletions
diff --git a/board/lpc2292sodimm/flash.c b/board/lpc2292sodimm/flash.c new file mode 100644 index 0000000000..dcef7ddba8 --- /dev/null +++ b/board/lpc2292sodimm/flash.c @@ -0,0 +1,477 @@ +/* + * (C) Copyright 2006 Embedded Artists AB <www.embeddedartists.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/hardware.h> + +/* IAP commands use 32 bytes at the top of CPU internal sram, we + use 512 bytes below that */ +#define COPY_BUFFER_LOCATION 0x40003de0 + +#define IAP_LOCATION 0x7ffffff1 +#define IAP_CMD_PREPARE 50 +#define IAP_CMD_COPY 51 +#define IAP_CMD_ERASE 52 +#define IAP_CMD_CHECK 53 +#define IAP_CMD_ID 54 +#define IAP_CMD_VERSION 55 +#define IAP_CMD_COMPARE 56 + +#define IAP_RET_CMD_SUCCESS 0 + +#define SST_BASEADDR 0x80000000 +#define SST_ADDR1 ((volatile ushort*)(SST_BASEADDR + (0x5555 << 1))) +#define SST_ADDR2 ((volatile ushort*)(SST_BASEADDR + (0x2AAA << 1))) + + +static unsigned long command[5]; +static unsigned long result[2]; + +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; + +extern void iap_entry(unsigned long * command, unsigned long * result); + +/*----------------------------------------------------------------------- + * + */ +int get_flash_sector(flash_info_t * info, ulong flash_addr) +{ + int i; + + for(i=1; i < (info->sector_count); i++) { + if (flash_addr < (info->start[i])) + break; + } + + return (i-1); +} + +/*----------------------------------------------------------------------- + * This function assumes that flash_addr is aligned on 512 bytes boundary + * in flash. This function also assumes that prepare have been called + * for the sector in question. + */ +int copy_buffer_to_flash(flash_info_t * info, ulong flash_addr) +{ + int first_sector; + int last_sector; + + first_sector = get_flash_sector(info, flash_addr); + last_sector = get_flash_sector(info, flash_addr + 512 - 1); + + /* prepare sectors for write */ + command[0] = IAP_CMD_PREPARE; + command[1] = first_sector; + command[2] = last_sector; + iap_entry(command, result); + if (result[0] != IAP_RET_CMD_SUCCESS) { + printf("IAP prepare failed\n"); + return ERR_PROG_ERROR; + } + + command[0] = IAP_CMD_COPY; + command[1] = flash_addr; + command[2] = COPY_BUFFER_LOCATION; + command[3] = 512; + command[4] = CFG_SYS_CLK_FREQ >> 10; + iap_entry(command, result); + if (result[0] != IAP_RET_CMD_SUCCESS) { + printf("IAP copy failed\n"); + return 1; + } + + return 0; +} + +/*----------------------------------------------------------------------- + * + */ +void write_word_sst(ulong addr, ushort data) +{ + ushort tmp; + + *SST_ADDR1 = 0x00AA; + *SST_ADDR2 = 0x0055; + *SST_ADDR1 = 0x00A0; + *((volatile ushort*)addr) = data; + /* do data polling */ + do { + tmp = *((volatile ushort*)addr); + } while (tmp != data); +} + +/*----------------------------------------------------------------------- + */ + +ulong flash_init (void) +{ + int j, k; + ulong size = 0; + ulong flashbase = 0; + + flash_info[0].flash_id = (PHILIPS_LPC2292 & FLASH_VENDMASK); + flash_info[0].size = 0x003E000; /* 256 - 8 KB */ + flash_info[0].sector_count = 17; + memset (flash_info[0].protect, 0, 17); + flashbase = 0x00000000; + for (j = 0, k = 0; j < 8; j++, k++) { + flash_info[0].start[k] = flashbase; + flashbase += 0x00002000; + } + for (j = 0; j < 2; j++, k++) { + flash_info[0].start[k] = flashbase; + flashbase += 0x00010000; + } + for (j = 0; j < 7; j++, k++) { + flash_info[0].start[k] = flashbase; + flashbase += 0x00002000; + } + size += flash_info[0].size; + + flash_info[1].flash_id = (SST_MANUFACT & FLASH_VENDMASK); + flash_info[1].size = 0x00200000; /* 2 MB */ + flash_info[1].sector_count = 512; + memset (flash_info[1].protect, 0, 512); + flashbase = SST_BASEADDR; + for (j=0; j<512; j++) { + flash_info[1].start[j] = flashbase; + flashbase += 0x1000; /* 4 KB sectors */ + } + size += flash_info[1].size; + + /* Protect monitor and environment sectors */ + flash_protect (FLAG_PROTECT_SET, + 0x0, + 0x0 + monitor_flash_len - 1, + &flash_info[0]); + + flash_protect (FLAG_PROTECT_SET, + CFG_ENV_ADDR, + CFG_ENV_ADDR + CFG_ENV_SIZE - 1, + &flash_info[0]); + + return size; +} + +/*----------------------------------------------------------------------- + */ +void flash_print_info (flash_info_t * info) +{ + int i; + int erased = 0; + unsigned long j; + unsigned long count; + unsigned char *p; + + switch (info->flash_id & FLASH_VENDMASK) { + case (SST_MANUFACT & FLASH_VENDMASK): + printf("SST: "); + break; + case (PHILIPS_LPC2292 & FLASH_VENDMASK): + printf("Philips: "); + break; + default: + printf ("Unknown Vendor "); + break; + } + + printf (" Size: %ld KB in %d Sectors\n", + info->size >> 10, info->sector_count); + + printf (" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; i++) { + if ((i % 5) == 0) { + printf ("\n "); + } + if (i < (info->sector_count - 1)) { + count = info->start[i+1] - info->start[i]; + } + else { + count = info->start[0] + info->size - info->start[i]; + } + p = (unsigned char*)(info->start[i]); + erased = 1; + for (j = 0; j < count; j++) { + if (*p != 0xFF) { + erased = 0; + break; + } + p++; + } + printf (" %08lX%s%s", info->start[i], info->protect[i] ? " RO" : " ", + erased ? " E" : " "); + } + printf ("\n"); +} + +/*----------------------------------------------------------------------- + */ + +int flash_erase_philips (flash_info_t * info, int s_first, int s_last) +{ + int flag; + int prot; + int sect; + + prot = 0; + for (sect = s_first; sect <= s_last; ++sect) { + if (info->protect[sect]) { + prot++; + } + } + if (prot) + return ERR_PROTECTED; + + + flag = disable_interrupts(); + + printf ("Erasing %d sectors starting at sector %2d.\n" + "This make take some time ... ", + s_last - s_first + 1, s_first); + + command[0] = IAP_CMD_PREPARE; + command[1] = s_first; + command[2] = s_last; + iap_entry(command, result); + if (result[0] != IAP_RET_CMD_SUCCESS) { + printf("IAP prepare failed\n"); + return ERR_PROTECTED; + } + + command[0] = IAP_CMD_ERASE; + command[1] = s_first; + command[2] = s_last; + command[3] = CFG_SYS_CLK_FREQ >> 10; + iap_entry(command, result); + if (result[0] != IAP_RET_CMD_SUCCESS) { + printf("IAP erase failed\n"); + return ERR_PROTECTED; + } + + if (flag) + enable_interrupts(); + + return ERR_OK; +} + +int flash_erase_sst (flash_info_t * info, int s_first, int s_last) +{ + int i; + + for (i = s_first; i <= s_last; i++) { + *SST_ADDR1 = 0x00AA; + *SST_ADDR2 = 0x0055; + *SST_ADDR1 = 0x0080; + *SST_ADDR1 = 0x00AA; + *SST_ADDR2 = 0x0055; + *((volatile ushort*)(info->start[i])) = 0x0030; + /* wait for erase to finish */ + udelay(25000); + } + + return ERR_OK; +} + +int flash_erase (flash_info_t * info, int s_first, int s_last) +{ + switch (info->flash_id & FLASH_VENDMASK) { + case (SST_MANUFACT & FLASH_VENDMASK): + return flash_erase_sst(info, s_first, s_last); + case (PHILIPS_LPC2292 & FLASH_VENDMASK): + return flash_erase_philips(info, s_first, s_last); + default: + return ERR_PROTECTED; + } + return ERR_PROTECTED; +} + +/*----------------------------------------------------------------------- + * Copy memory to flash. + * + * cnt is in bytes + */ + +int write_buff_sst (flash_info_t * info, uchar * src, ulong addr, ulong cnt) +{ + ushort tmp; + ulong i; + uchar* src_org; + uchar* dst_org; + ulong cnt_org = cnt; + int ret = ERR_OK; + + src_org = src; + dst_org = (uchar*)addr; + + if (addr & 1) { /* if odd address */ + tmp = *((uchar*)(addr - 1)); /* little endian */ + tmp |= (*src << 8); + write_word_sst(addr - 1, tmp); + addr += 1; + cnt -= 1; + src++; + } + while (cnt > 1) { + tmp = ((*(src+1)) << 8) + (*src); /* little endian */ + write_word_sst(addr, tmp); + addr += 2; + src += 2; + cnt -= 2; + } + if (cnt > 0) { + tmp = (*((uchar*)(addr + 1))) << 8; + tmp |= *src; + write_word_sst(addr, tmp); + } + + for (i = 0; i < cnt_org; i++) { + if (*dst_org != *src_org) { + printf("Write failed. Byte %lX differs\n", i); + ret = ERR_PROG_ERROR; + break; + } + dst_org++; + src_org++; + } + + + return ret; +} + +int write_buff_philips (flash_info_t * info, + uchar * src, + ulong addr, + ulong cnt) +{ + int first_copy_size; + int last_copy_size; + int first_block; + int last_block; + int nbr_mid_blocks; + uchar memmap_value; + ulong i; + uchar* src_org; + uchar* dst_org; + int ret = ERR_OK; + + src_org = src; + dst_org = (uchar*)addr; + + first_block = addr / 512; + last_block = (addr + cnt) / 512; + nbr_mid_blocks = last_block - first_block - 1; + + first_copy_size = 512 - (addr % 512); + last_copy_size = (addr + cnt) % 512; + +#if 0 + printf("\ncopy first block: (1) %lX -> %lX 0x200 bytes, " + "(2) %lX -> %lX 0x%X bytes, (3) %lX -> %lX 0x200 bytes\n", + (ulong)(first_block * 512), + (ulong)COPY_BUFFER_LOCATION, + (ulong)src, + (ulong)(COPY_BUFFER_LOCATION + 512 - first_copy_size), + first_copy_size, + (ulong)COPY_BUFFER_LOCATION, + (ulong)(first_block * 512)); +#endif + + /* copy first block */ + memcpy((void*)COPY_BUFFER_LOCATION, + (void*)(first_block * 512), 512); + memcpy((void*)(COPY_BUFFER_LOCATION + 512 - first_copy_size), + src, first_copy_size); + copy_buffer_to_flash(info, first_block * 512); + src += first_copy_size; + addr += first_copy_size; + + /* copy middle blocks */ + for (i = 0; i < nbr_mid_blocks; i++) { +#if 0 + printf("copy middle block: %lX -> %lX 512 bytes, " + "%lX -> %lX 512 bytes\n", + (ulong)src, + (ulong)COPY_BUFFER_LOCATION, + (ulong)COPY_BUFFER_LOCATION, + (ulong)addr); +#endif + memcpy((void*)COPY_BUFFER_LOCATION, src, 512); + copy_buffer_to_flash(info, addr); + src += 512; + addr += 512; + } + + + if (last_copy_size > 0) { +#if 0 + printf("copy last block: (1) %lX -> %lX 0x200 bytes, " + "(2) %lX -> %lX 0x%X bytes, (3) %lX -> %lX x200 bytes\n", + (ulong)(last_block * 512), + (ulong)COPY_BUFFER_LOCATION, + (ulong)src, + (ulong)(COPY_BUFFER_LOCATION), + last_copy_size, + (ulong)COPY_BUFFER_LOCATION, + (ulong)addr); +#endif + /* copy last block */ + memcpy((void*)COPY_BUFFER_LOCATION, + (void*)(last_block * 512), 512); + memcpy((void*)COPY_BUFFER_LOCATION, + src, last_copy_size); + copy_buffer_to_flash(info, addr); + } + + /* verify write */ + memmap_value = GET8(MEMMAP); + + disable_interrupts(); + + PUT8(MEMMAP, 01); /* we must make sure that initial 64 + bytes are taken from flash when we + do the compare */ + + for (i = 0; i < cnt; i++) { + if (*dst_org != *src_org){ + printf("Write failed. Byte %lX differs\n", i); + ret = ERR_PROG_ERROR; + break; + } + dst_org++; + src_org++; + } + + PUT8(MEMMAP, memmap_value); + enable_interrupts(); + + return ret; +} + +int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) +{ + switch (info->flash_id & FLASH_VENDMASK) { + case (SST_MANUFACT & FLASH_VENDMASK): + return write_buff_sst(info, src, addr, cnt); + case (PHILIPS_LPC2292 & FLASH_VENDMASK): + return write_buff_philips(info, src, addr, cnt); + default: + return ERR_PROG_ERROR; + } + return ERR_PROG_ERROR; +} |
