summaryrefslogtreecommitdiffstats
path: root/board/hmi1001/hmi1001.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/hmi1001/hmi1001.c')
-rw-r--r--board/hmi1001/hmi1001.c22
1 files changed, 11 insertions, 11 deletions
diff --git a/board/hmi1001/hmi1001.c b/board/hmi1001/hmi1001.c
index 8cfd75bd83..9cbed4b8c5 100644
--- a/board/hmi1001/hmi1001.c
+++ b/board/hmi1001/hmi1001.c
@@ -33,7 +33,7 @@
#include <asm/processor.h>
#include <malloc.h>
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
static void sdram_start (int hi_addr)
{
long hi_addr_bit = hi_addr ? 0x01000000 : 0;
@@ -76,14 +76,14 @@ static void sdram_start (int hi_addr)
/*
* ATTENTION: Although partially referenced initdram does NOT make real use
- * use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
+ * use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
* is something else than 0x00000000.
*/
phys_size_t initdram (int board_type)
{
ulong dramsize = 0;
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
ulong test1, test2;
uint svr, pvr;
@@ -105,9 +105,9 @@ phys_size_t initdram (int board_type)
/* find RAM size using SDRAM CS0 only */
sdram_start(0);
- test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x20000000);
+ test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x20000000);
sdram_start(1);
- test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x20000000);
+ test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x20000000);
if (test1 > test2) {
sdram_start(0);
dramsize = test1;
@@ -129,7 +129,7 @@ phys_size_t initdram (int board_type)
}
*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
-#else /* CFG_RAMBOOT */
+#else /* CONFIG_SYS_RAMBOOT */
/* retrieve size of memory connected to SDRAM CS0 */
dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
@@ -147,7 +147,7 @@ phys_size_t initdram (int board_type)
dramsize2 = 0;
}
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
/*
* On MPC5200B we need to set the special configuration delay in the
@@ -193,8 +193,8 @@ struct kbd_data_t {
struct kbd_data_t* get_keys (struct kbd_data_t *kbd_data)
{
- kbd_data->s1 = *((volatile uchar*)(CFG_STATUS1_BASE));
- kbd_data->s2 = *((volatile uchar*)(CFG_STATUS2_BASE));
+ kbd_data->s1 = *((volatile uchar*)(CONFIG_SYS_STATUS1_BASE));
+ kbd_data->s2 = *((volatile uchar*)(CONFIG_SYS_STATUS2_BASE));
return kbd_data;
}
@@ -300,9 +300,9 @@ int board_early_init_r (void)
{
*(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
*(vu_long *)MPC5XXX_BOOTCS_START =
- *(vu_long *)MPC5XXX_CS0_START = START_REG(CFG_FLASH_BASE);
+ *(vu_long *)MPC5XXX_CS0_START = START_REG(CONFIG_SYS_FLASH_BASE);
*(vu_long *)MPC5XXX_BOOTCS_STOP =
- *(vu_long *)MPC5XXX_CS0_STOP = STOP_REG(CFG_FLASH_BASE, CFG_FLASH_SIZE);
+ *(vu_long *)MPC5XXX_CS0_STOP = STOP_REG(CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_SIZE);
return 0;
}
#ifdef CONFIG_PCI
OpenPOWER on IntegriCloud