diff options
Diffstat (limited to 'board/gdsys/common/adv7611.c')
| -rw-r--r-- | board/gdsys/common/adv7611.c | 177 |
1 files changed, 177 insertions, 0 deletions
diff --git a/board/gdsys/common/adv7611.c b/board/gdsys/common/adv7611.c new file mode 100644 index 0000000000..b728274cce --- /dev/null +++ b/board/gdsys/common/adv7611.c @@ -0,0 +1,177 @@ +/* + * (C) Copyright 2014 + * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <i2c.h> + +#define ADV7611_I2C_ADDR 0x4c +#define ADV7611_RDINFO 0x2051 + +/* + * ADV7611 I2C Addresses in u-boot notation + */ +enum { + CP_I2C_ADDR = 0x22, + DPLL_I2C_ADDR = 0x26, + KSV_I2C_ADDR = 0x32, + HDMI_I2C_ADDR = 0x34, + EDID_I2C_ADDR = 0x36, + INFOFRAME_I2C_ADDR = 0x3e, + CEC_I2C_ADDR = 0x40, + IO_I2C_ADDR = ADV7611_I2C_ADDR, +}; + +/* + * Global Control Registers + */ +enum { + IO_RD_INFO_MSB = 0xea, + IO_RD_INFO_LSB = 0xeb, + IO_CEC_ADDR = 0xf4, + IO_INFOFRAME_ADDR = 0xf5, + IO_DPLL_ADDR = 0xf8, + IO_KSV_ADDR = 0xf9, + IO_EDID_ADDR = 0xfa, + IO_HDMI_ADDR = 0xfb, + IO_CP_ADDR = 0xfd, +}; + +int adv7611_i2c[] = CONFIG_SYS_ADV7611_I2C; + +int adv7611_probe(unsigned int screen) +{ + int old_bus = i2c_get_bus_num(); + unsigned int rd_info; + int res = 0; + + i2c_set_bus_num(adv7611_i2c[screen]); + + rd_info = (i2c_reg_read(IO_I2C_ADDR, IO_RD_INFO_MSB) << 8) + | i2c_reg_read(IO_I2C_ADDR, IO_RD_INFO_LSB); + + if (rd_info != ADV7611_RDINFO) { + res = -1; + goto out; + } + + /* + * set I2C addresses to default values + */ + i2c_reg_write(IO_I2C_ADDR, IO_CEC_ADDR, CEC_I2C_ADDR << 1); + i2c_reg_write(IO_I2C_ADDR, IO_INFOFRAME_ADDR, INFOFRAME_I2C_ADDR << 1); + i2c_reg_write(IO_I2C_ADDR, IO_DPLL_ADDR, DPLL_I2C_ADDR << 1); + i2c_reg_write(IO_I2C_ADDR, IO_KSV_ADDR, KSV_I2C_ADDR << 1); + i2c_reg_write(IO_I2C_ADDR, IO_EDID_ADDR, EDID_I2C_ADDR << 1); + i2c_reg_write(IO_I2C_ADDR, IO_HDMI_ADDR, HDMI_I2C_ADDR << 1); + i2c_reg_write(IO_I2C_ADDR, IO_CP_ADDR, CP_I2C_ADDR << 1); + + /* + * do magic initialization sequence from + * "ADV7611 Register Settings Recommendations Revision 1.5" + * with most registers undocumented + */ + i2c_reg_write(CP_I2C_ADDR, 0x6c, 0x00); + i2c_reg_write(HDMI_I2C_ADDR, 0x9b, 0x03); + i2c_reg_write(HDMI_I2C_ADDR, 0x6f, 0x08); + i2c_reg_write(HDMI_I2C_ADDR, 0x85, 0x1f); + i2c_reg_write(HDMI_I2C_ADDR, 0x87, 0x70); + i2c_reg_write(HDMI_I2C_ADDR, 0x57, 0xda); + i2c_reg_write(HDMI_I2C_ADDR, 0x58, 0x01); + i2c_reg_write(HDMI_I2C_ADDR, 0x03, 0x98); + i2c_reg_write(HDMI_I2C_ADDR, 0x4c, 0x44); + + /* + * IO_REG_02, default 0xf0 + * + * INP_COLOR_SPACE (IO, Address 0x02[7:4]) + * default: 0b1111 auto + * set to : 0b0001 force RGB (range 0 to 255) input + * + * RGB_OUT (IO, Address 0x02[1]) + * default: 0 YPbPr color space output + * set to : 1 RGB color space output + */ + i2c_reg_write(IO_I2C_ADDR, 0x02, 0x12); + + /* + * IO_REG_03, default 0x00 + * + * OP_FORMAT_SEL (IO, Address 0x03[7:0]) + * default: 0x00 8-bit SDR ITU-656 mode + * set to : 0x40 24-bit 4:4:4 SDR mode + */ + i2c_reg_write(IO_I2C_ADDR, 0x03, 0x40); + + /* + * IO_REG_05, default 0x2c + * + * AVCODE_INSERT_EN (IO, Address 0x05[2]) + * default: 1 insert AV codes into data stream + * set to : 0 do not insert AV codes into data stream + */ + i2c_reg_write(IO_I2C_ADDR, 0x05, 0x28); + + /* + * IO_REG_0C, default 0x62 + * + * POWER_DOWN (IO, Address 0x0C[5]) + * default: 1 chip is powered down + * set to : 0 chip is operational + */ + i2c_reg_write(IO_I2C_ADDR, 0x0c, 0x42); + + /* + * IO_REG_15, default 0xbe + * + * TRI_SYNCS (IO, Address 0x15[3) + * TRI_LLC (IO, Address 0x15[2]) + * TRI_PIX (IO, Address 0x15[1]) + * default: 1 video output pins are tristate + * set to : 0 video output pins are active + */ + i2c_reg_write(IO_I2C_ADDR, 0x15, 0xb0); + + /* + * HDMI_REGISTER_02H, default 0xff + * + * CLOCK_TERMA_DISABLE (HDMI, Address 0x83[0]) + * default: 1 disable termination + * set to : 0 enable termination + * Future options are: + * - use the chips automatic termination control + * - set this manually on cable detect + * but at the moment this seems a safe default. + */ + i2c_reg_write(HDMI_I2C_ADDR, 0x83, 0xfe); + + /* + * HDMI_CP_CNTRL_1, default 0x01 + * + * HDMI_FRUN_EN (CP, Address 0xBA[0]) + * default: 1 Enable the free run feature in HDMI mode + * set to : 0 Disable the free run feature in HDMI mode + */ + i2c_reg_write(CP_I2C_ADDR, 0xba, 0x00); + + /* + * INT1_CONFIGURATION, default 0x20 + * + * INTRQ_DUR_SEL[1:0] (IO, Address 0x40[7:6]) + * default: 00 Interrupt signal is active for 4 Xtal periods + * set to : 11 Active until cleared + * + * INTRQ_OP_SEL[1:0] (IO, Address 0x40[1:0]) + * default: 00 Open drain + * set to : 10 Drives high when active + */ + i2c_reg_write(IO_I2C_ADDR, 0x40, 0xc2); + +out: + i2c_set_bus_num(old_bus); + + return res; +} |
