diff options
Diffstat (limited to 'board/freescale')
23 files changed, 316 insertions, 66 deletions
diff --git a/board/freescale/ls1021aqds/Kconfig b/board/freescale/ls1021aqds/Kconfig index 3cee468a3d..119b955041 100644 --- a/board/freescale/ls1021aqds/Kconfig +++ b/board/freescale/ls1021aqds/Kconfig @@ -1,8 +1,5 @@ if TARGET_LS1021AQDS -config SYS_CPU - default "armv7" - config SYS_BOARD default "ls1021aqds" diff --git a/board/freescale/ls1021atwr/Kconfig b/board/freescale/ls1021atwr/Kconfig index 312f9388fc..bc50b8d966 100644 --- a/board/freescale/ls1021atwr/Kconfig +++ b/board/freescale/ls1021atwr/Kconfig @@ -1,8 +1,5 @@ if TARGET_LS1021ATWR -config SYS_CPU - default "armv7" - config SYS_BOARD default "ls1021atwr" diff --git a/board/freescale/mpc5121ads/README b/board/freescale/mpc5121ads/README index defcd6b469..741bc40382 100644 --- a/board/freescale/mpc5121ads/README +++ b/board/freescale/mpc5121ads/README @@ -1,7 +1,7 @@ To configure for the current (Rev 3.x) ADS5121 - make ads5121_config + make mpc5121ads_config This will automatically include PCI, the Real Time CLock, add backup flash ability and set the correct frequency and memory configuration. To configure for the older Rev 2 ADS5121 type (this will not have PCI) - make ads5121_rev2_config + make mpc5121ads_rev2_config diff --git a/board/freescale/mx23evk/Kconfig b/board/freescale/mx23evk/Kconfig index 1bbbe2d5f5..51a8f9f773 100644 --- a/board/freescale/mx23evk/Kconfig +++ b/board/freescale/mx23evk/Kconfig @@ -1,8 +1,5 @@ if TARGET_MX23EVK -config SYS_CPU - default "arm926ejs" - config SYS_BOARD default "mx23evk" diff --git a/board/freescale/mx25pdk/Kconfig b/board/freescale/mx25pdk/Kconfig index a693239701..af06b4c827 100644 --- a/board/freescale/mx25pdk/Kconfig +++ b/board/freescale/mx25pdk/Kconfig @@ -1,8 +1,5 @@ if TARGET_MX25PDK -config SYS_CPU - default "arm926ejs" - config SYS_BOARD default "mx25pdk" diff --git a/board/freescale/mx28evk/Kconfig b/board/freescale/mx28evk/Kconfig index cc654bcfa5..39777bd70f 100644 --- a/board/freescale/mx28evk/Kconfig +++ b/board/freescale/mx28evk/Kconfig @@ -1,8 +1,5 @@ if TARGET_MX28EVK -config SYS_CPU - default "arm926ejs" - config SYS_BOARD default "mx28evk" diff --git a/board/freescale/mx31ads/Kconfig b/board/freescale/mx31ads/Kconfig index b4ea64b405..eeeb6f490f 100644 --- a/board/freescale/mx31ads/Kconfig +++ b/board/freescale/mx31ads/Kconfig @@ -1,8 +1,5 @@ if TARGET_MX31ADS -config SYS_CPU - default "arm1136" - config SYS_BOARD default "mx31ads" diff --git a/board/freescale/mx31pdk/Kconfig b/board/freescale/mx31pdk/Kconfig index 68c3880638..055545c930 100644 --- a/board/freescale/mx31pdk/Kconfig +++ b/board/freescale/mx31pdk/Kconfig @@ -1,8 +1,5 @@ if TARGET_MX31PDK -config SYS_CPU - default "arm1136" - config SYS_BOARD default "mx31pdk" diff --git a/board/freescale/mx35pdk/Kconfig b/board/freescale/mx35pdk/Kconfig index ca5b40f07d..021d19e551 100644 --- a/board/freescale/mx35pdk/Kconfig +++ b/board/freescale/mx35pdk/Kconfig @@ -1,8 +1,5 @@ if TARGET_MX35PDK -config SYS_CPU - default "arm1136" - config SYS_BOARD default "mx35pdk" diff --git a/board/freescale/mx51evk/Kconfig b/board/freescale/mx51evk/Kconfig index 07861a9706..f9b69cbd66 100644 --- a/board/freescale/mx51evk/Kconfig +++ b/board/freescale/mx51evk/Kconfig @@ -1,8 +1,5 @@ if TARGET_MX51EVK -config SYS_CPU - default "armv7" - config SYS_BOARD default "mx51evk" diff --git a/board/freescale/mx53ard/Kconfig b/board/freescale/mx53ard/Kconfig index 566df85985..41f46a04ac 100644 --- a/board/freescale/mx53ard/Kconfig +++ b/board/freescale/mx53ard/Kconfig @@ -1,8 +1,5 @@ if TARGET_MX53ARD -config SYS_CPU - default "armv7" - config SYS_BOARD default "mx53ard" diff --git a/board/freescale/mx53evk/Kconfig b/board/freescale/mx53evk/Kconfig index d064b104dc..c226c1ca06 100644 --- a/board/freescale/mx53evk/Kconfig +++ b/board/freescale/mx53evk/Kconfig @@ -1,8 +1,5 @@ if TARGET_MX53EVK -config SYS_CPU - default "armv7" - config SYS_BOARD default "mx53evk" diff --git a/board/freescale/mx53loco/Kconfig b/board/freescale/mx53loco/Kconfig index bc44e59bfc..5ca1672bf7 100644 --- a/board/freescale/mx53loco/Kconfig +++ b/board/freescale/mx53loco/Kconfig @@ -1,8 +1,5 @@ if TARGET_MX53LOCO -config SYS_CPU - default "armv7" - config SYS_BOARD default "mx53loco" diff --git a/board/freescale/mx53smd/Kconfig b/board/freescale/mx53smd/Kconfig index 62c37d4e0c..1195d33d06 100644 --- a/board/freescale/mx53smd/Kconfig +++ b/board/freescale/mx53smd/Kconfig @@ -1,8 +1,5 @@ if TARGET_MX53SMD -config SYS_CPU - default "armv7" - config SYS_BOARD default "mx53smd" diff --git a/board/freescale/mx6qarm2/Kconfig b/board/freescale/mx6qarm2/Kconfig index f7f18db9fc..4af33af185 100644 --- a/board/freescale/mx6qarm2/Kconfig +++ b/board/freescale/mx6qarm2/Kconfig @@ -1,8 +1,5 @@ if TARGET_MX6QARM2 -config SYS_CPU - default "armv7" - config SYS_BOARD default "mx6qarm2" diff --git a/board/freescale/mx6qsabreauto/Kconfig b/board/freescale/mx6qsabreauto/Kconfig index d0cf355bc1..cc2a140c52 100644 --- a/board/freescale/mx6qsabreauto/Kconfig +++ b/board/freescale/mx6qsabreauto/Kconfig @@ -1,8 +1,5 @@ if TARGET_MX6QSABREAUTO -config SYS_CPU - default "armv7" - config SYS_BOARD default "mx6qsabreauto" diff --git a/board/freescale/mx6qsabreauto/mx6qsabreauto.c b/board/freescale/mx6qsabreauto/mx6qsabreauto.c index 1cb7561759..42ae6fac5e 100644 --- a/board/freescale/mx6qsabreauto/mx6qsabreauto.c +++ b/board/freescale/mx6qsabreauto/mx6qsabreauto.c @@ -17,12 +17,17 @@ #include <asm/imx-common/iomux-v3.h> #include <asm/imx-common/mxc_i2c.h> #include <asm/imx-common/boot_mode.h> +#include <asm/imx-common/spi.h> #include <mmc.h> #include <fsl_esdhc.h> #include <miiphy.h> #include <netdev.h> #include <asm/arch/sys_proto.h> #include <i2c.h> +#include <asm/arch/mxc_hdmi.h> +#include <asm/imx-common/video.h> +#include <asm/arch/crm_regs.h> +#include <pca953x.h> DECLARE_GLOBAL_DATA_PTR; @@ -112,6 +117,44 @@ static iomux_v3_cfg_t const port_exp[] = { MX6_PAD_SD2_DAT0__GPIO1_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL), }; +/*Define for building port exp gpio, pin starts from 0*/ +#define PORTEXP_IO_NR(chip, pin) \ + ((chip << 5) + pin) + +/*Get the chip addr from a ioexp gpio*/ +#define PORTEXP_IO_TO_CHIP(gpio_nr) \ + (gpio_nr >> 5) + +/*Get the pin number from a ioexp gpio*/ +#define PORTEXP_IO_TO_PIN(gpio_nr) \ + (gpio_nr & 0x1f) + +static int port_exp_direction_output(unsigned gpio, int value) +{ + int ret; + + i2c_set_bus_num(2); + ret = i2c_probe(PORTEXP_IO_TO_CHIP(gpio)); + if (ret) + return ret; + + ret = pca953x_set_dir(PORTEXP_IO_TO_CHIP(gpio), + (1 << PORTEXP_IO_TO_PIN(gpio)), + (PCA953X_DIR_OUT << PORTEXP_IO_TO_PIN(gpio))); + + if (ret) + return ret; + + ret = pca953x_set_val(PORTEXP_IO_TO_CHIP(gpio), + (1 << PORTEXP_IO_TO_PIN(gpio)), + (value << PORTEXP_IO_TO_PIN(gpio))); + + if (ret) + return ret; + + return 0; +} + static void setup_iomux_enet(void) { imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads)); @@ -234,10 +277,65 @@ u32 get_board_rev(void) return (get_cpu_rev() & ~(0xF << 8)) | rev; } +#if defined(CONFIG_VIDEO_IPUV3) +static void do_enable_hdmi(struct display_info_t const *dev) +{ + imx_enable_hdmi_phy(); +} + +struct display_info_t const displays[] = {{ + .bus = -1, + .addr = 0, + .pixfmt = IPU_PIX_FMT_RGB24, + .detect = detect_hdmi, + .enable = do_enable_hdmi, + .mode = { + .name = "HDMI", + .refresh = 60, + .xres = 1024, + .yres = 768, + .pixclock = 15385, + .left_margin = 220, + .right_margin = 40, + .upper_margin = 21, + .lower_margin = 7, + .hsync_len = 60, + .vsync_len = 10, + .sync = FB_SYNC_EXT, + .vmode = FB_VMODE_NONINTERLACED, +} } }; +size_t display_count = ARRAY_SIZE(displays); + +static void setup_display(void) +{ + struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; + int reg; + + enable_ipu_clock(); + imx_setup_hdmi(); + + reg = readl(&mxc_ccm->chsccdr); + reg |= (CHSCCDR_CLK_SEL_LDB_DI0 + << MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET); + writel(reg, &mxc_ccm->chsccdr); +} +#endif /* CONFIG_VIDEO_IPUV3 */ + +/* + * Do not overwrite the console + * Use always serial for U-Boot console + */ +int overwrite_console(void) +{ + return 1; +} + int board_early_init_f(void) { setup_iomux_uart(); - +#ifdef CONFIG_VIDEO_IPUV3 + setup_display(); +#endif return 0; } @@ -302,3 +400,57 @@ int checkboard(void) return 0; } + +#ifdef CONFIG_USB_EHCI_MX6 +#define USB_HOST1_PWR PORTEXP_IO_NR(0x32, 7) +#define USB_OTG_PWR PORTEXP_IO_NR(0x34, 1) + +iomux_v3_cfg_t const usb_otg_pads[] = { + MX6_PAD_ENET_RX_ER__USB_OTG_ID | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +int board_ehci_hcd_init(int port) +{ + switch (port) { + case 0: + imx_iomux_v3_setup_multiple_pads(usb_otg_pads, + ARRAY_SIZE(usb_otg_pads)); + + /* + * Set daisy chain for otg_pin_id on 6q. + * For 6dl, this bit is reserved. + */ + imx_iomux_set_gpr_register(1, 13, 1, 0); + break; + case 1: + break; + default: + printf("MXC USB port %d not yet supported\n", port); + return -EINVAL; + } + return 0; +} + +int board_ehci_power(int port, int on) +{ + switch (port) { + case 0: + if (on) + port_exp_direction_output(USB_OTG_PWR, 1); + else + port_exp_direction_output(USB_OTG_PWR, 0); + break; + case 1: + if (on) + port_exp_direction_output(USB_HOST1_PWR, 1); + else + port_exp_direction_output(USB_HOST1_PWR, 0); + break; + default: + printf("MXC USB port %d not yet supported\n", port); + return -EINVAL; + } + + return 0; +} +#endif diff --git a/board/freescale/mx6sabresd/Kconfig b/board/freescale/mx6sabresd/Kconfig index 15b65c09f1..fa6ddb2292 100644 --- a/board/freescale/mx6sabresd/Kconfig +++ b/board/freescale/mx6sabresd/Kconfig @@ -1,8 +1,5 @@ if TARGET_MX6SABRESD -config SYS_CPU - default "armv7" - config SYS_BOARD default "mx6sabresd" diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c index 81dcd6e5dd..3d81fffea5 100644 --- a/board/freescale/mx6sabresd/mx6sabresd.c +++ b/board/freescale/mx6sabresd/mx6sabresd.c @@ -51,6 +51,8 @@ DECLARE_GLOBAL_DATA_PTR; #define I2C_PAD MUX_PAD_CTRL(I2C_PAD_CTRL) +#define DISP0_PWR_EN IMX_GPIO_NR(1, 21) + int dram_init(void) { gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); @@ -141,6 +143,45 @@ iomux_v3_cfg_t const ecspi1_pads[] = { MX6_PAD_KEY_ROW1__GPIO4_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL), }; +static iomux_v3_cfg_t const rgb_pads[] = { + MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DI0_PIN2__IPU1_DI0_PIN02 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DI0_PIN3__IPU1_DI0_PIN03 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DI0_PIN4__IPU1_DI0_PIN04 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_SD1_DAT3__GPIO1_IO21 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +static void enable_rgb(struct display_info_t const *dev) +{ + imx_iomux_v3_setup_multiple_pads(rgb_pads, ARRAY_SIZE(rgb_pads)); + gpio_direction_output(DISP0_PWR_EN, 1); +} + static struct i2c_pads_info i2c_pad_info1 = { .scl = { .i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL | I2C_PAD, @@ -357,6 +398,26 @@ struct display_info_t const displays[] = {{ .vsync_len = 10, .sync = FB_SYNC_EXT, .vmode = FB_VMODE_NONINTERLACED +} }, { + .bus = 0, + .addr = 0, + .pixfmt = IPU_PIX_FMT_RGB24, + .detect = NULL, + .enable = enable_rgb, + .mode = { + .name = "SEIKO-WVGA", + .refresh = 60, + .xres = 800, + .yres = 480, + .pixclock = 29850, + .left_margin = 89, + .right_margin = 164, + .upper_margin = 23, + .lower_margin = 10, + .hsync_len = 10, + .vsync_len = 10, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED } } }; size_t display_count = ARRAY_SIZE(displays); diff --git a/board/freescale/mx6slevk/Kconfig b/board/freescale/mx6slevk/Kconfig index 558aeab0e3..d32da900a3 100644 --- a/board/freescale/mx6slevk/Kconfig +++ b/board/freescale/mx6slevk/Kconfig @@ -1,8 +1,5 @@ if TARGET_MX6SLEVK -config SYS_CPU - default "armv7" - config SYS_BOARD default "mx6slevk" diff --git a/board/freescale/mx6slevk/mx6slevk.c b/board/freescale/mx6slevk/mx6slevk.c index a0832f4a20..e76c343812 100644 --- a/board/freescale/mx6slevk/mx6slevk.c +++ b/board/freescale/mx6slevk/mx6slevk.c @@ -13,6 +13,7 @@ #include <asm/arch/sys_proto.h> #include <asm/gpio.h> #include <asm/imx-common/iomux-v3.h> +#include <asm/imx-common/spi.h> #include <asm/io.h> #include <linux/sizes.h> #include <common.h> @@ -51,6 +52,23 @@ static iomux_v3_cfg_t const uart1_pads[] = { MX6_PAD_UART1_RXD__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), }; +static iomux_v3_cfg_t const usdhc1_pads[] = { + /* 8 bit SD */ + MX6_PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD1_CMD__USDHC1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD1_DAT0__USDHC1_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD1_DAT1__USDHC1_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD1_DAT2__USDHC1_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD1_DAT3__USDHC1_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD1_DAT4__USDHC1_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD1_DAT5__USDHC1_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD1_DAT6__USDHC1_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD1_DAT7__USDHC1_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + + /*CD pin*/ + MX6_PAD_KEY_ROW7__GPIO_4_7 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + static iomux_v3_cfg_t const usdhc2_pads[] = { MX6_PAD_SD2_CLK__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6_PAD_SD2_CMD__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), @@ -58,6 +76,21 @@ static iomux_v3_cfg_t const usdhc2_pads[] = { MX6_PAD_SD2_DAT1__USDHC2_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6_PAD_SD2_DAT2__USDHC2_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6_PAD_SD2_DAT3__USDHC2_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + + /*CD pin*/ + MX6_PAD_SD2_DAT7__GPIO_5_0 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +static iomux_v3_cfg_t const usdhc3_pads[] = { + MX6_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT1__USDHC3_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT2__USDHC3_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT3__USDHC3_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + + /*CD pin*/ + MX6_PAD_REF_CLK_32K__GPIO_3_22 | MUX_PAD_CTRL(NO_PAD_CTRL), }; static iomux_v3_cfg_t const fec_pads[] = { @@ -108,21 +141,82 @@ static void setup_iomux_fec(void) gpio_set_value(ETH_PHY_RESET, 1); } -static struct fsl_esdhc_cfg usdhc_cfg[1] = { - {USDHC2_BASE_ADDR}, +#define USDHC1_CD_GPIO IMX_GPIO_NR(4, 7) +#define USDHC2_CD_GPIO IMX_GPIO_NR(5, 0) +#define USDHC3_CD_GPIO IMX_GPIO_NR(3, 22) + +static struct fsl_esdhc_cfg usdhc_cfg[3] = { + {USDHC1_BASE_ADDR}, + {USDHC2_BASE_ADDR, 0, 4}, + {USDHC3_BASE_ADDR, 0, 4}, }; int board_mmc_getcd(struct mmc *mmc) { - return 1; /* Assume boot SD always present */ + struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; + int ret = 0; + + switch (cfg->esdhc_base) { + case USDHC1_BASE_ADDR: + ret = !gpio_get_value(USDHC1_CD_GPIO); + break; + case USDHC2_BASE_ADDR: + ret = !gpio_get_value(USDHC2_CD_GPIO); + break; + case USDHC3_BASE_ADDR: + ret = !gpio_get_value(USDHC3_CD_GPIO); + break; + } + + return ret; } int board_mmc_init(bd_t *bis) { - imx_iomux_v3_setup_multiple_pads(usdhc2_pads, ARRAY_SIZE(usdhc2_pads)); + int i, ret; + + /* + * According to the board_mmc_init() the following map is done: + * (U-boot device node) (Physical Port) + * mmc0 USDHC1 + * mmc1 USDHC2 + * mmc2 USDHC3 + */ + for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) { + switch (i) { + case 0: + imx_iomux_v3_setup_multiple_pads( + usdhc1_pads, ARRAY_SIZE(usdhc1_pads)); + gpio_direction_input(USDHC1_CD_GPIO); + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); + break; + case 1: + imx_iomux_v3_setup_multiple_pads( + usdhc2_pads, ARRAY_SIZE(usdhc2_pads)); + gpio_direction_input(USDHC2_CD_GPIO); + usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); + break; + case 2: + imx_iomux_v3_setup_multiple_pads( + usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); + gpio_direction_input(USDHC3_CD_GPIO); + usdhc_cfg[2].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); + break; + default: + printf("Warning: you configured more USDHC controllers" + "(%d) than supported by the board\n", i + 1); + return -EINVAL; + } + + ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]); + if (ret) { + printf("Warning: failed to initialize " + "mmc dev %d\n", i); + return ret; + } + } - usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); - return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); + return 0; } #ifdef CONFIG_FEC_MXC diff --git a/board/freescale/mx6sxsabresd/Kconfig b/board/freescale/mx6sxsabresd/Kconfig index 2a86b68afc..940983e932 100644 --- a/board/freescale/mx6sxsabresd/Kconfig +++ b/board/freescale/mx6sxsabresd/Kconfig @@ -1,8 +1,5 @@ if TARGET_MX6SXSABRESD -config SYS_CPU - default "armv7" - config SYS_BOARD default "mx6sxsabresd" diff --git a/board/freescale/vf610twr/Kconfig b/board/freescale/vf610twr/Kconfig index 684ef279c3..ef091d6b2b 100644 --- a/board/freescale/vf610twr/Kconfig +++ b/board/freescale/vf610twr/Kconfig @@ -1,8 +1,5 @@ if TARGET_VF610TWR -config SYS_CPU - default "armv7" - config SYS_BOARD default "vf610twr" |
