summaryrefslogtreecommitdiffstats
path: root/board/freescale/mx53loco/mx53loco.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/freescale/mx53loco/mx53loco.c')
-rw-r--r--board/freescale/mx53loco/mx53loco.c14
1 files changed, 10 insertions, 4 deletions
diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c
index b32a97ff1a..efcf4b390d 100644
--- a/board/freescale/mx53loco/mx53loco.c
+++ b/board/freescale/mx53loco/mx53loco.c
@@ -186,7 +186,7 @@ int board_mmc_init(bd_t *bis)
};
u32 index;
- s32 status = 0;
+ int ret;
esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
@@ -205,12 +205,14 @@ int board_mmc_init(bd_t *bis)
printf("Warning: you configured more ESDHC controller"
"(%d) as supported by the board(2)\n",
CONFIG_SYS_FSL_ESDHC_NUM);
- return status;
+ return -EINVAL;
}
- status |= fsl_esdhc_initialize(bis, &esdhc_cfg[index]);
+ ret = fsl_esdhc_initialize(bis, &esdhc_cfg[index]);
+ if (ret)
+ return ret;
}
- return status;
+ return 0;
}
#endif
@@ -242,6 +244,8 @@ static int power_init(void)
if (!p)
return -ENODEV;
+ setenv("fdt_file", "imx53-qsb.dtb");
+
/* Set VDDA to 1.25V */
val = DA9052_BUCKCORE_BCOREEN | DA_BUCKCORE_VBCORE_1_250V;
ret = pmic_reg_write(p, DA9053_BUCKCORE_REG, val);
@@ -283,6 +287,8 @@ static int power_init(void)
if (!p)
return -ENODEV;
+ setenv("fdt_file", "imx53-qsrb.dtb");
+
/* Set VDDGP to 1.25V for 1GHz on SW1 */
pmic_reg_read(p, REG_SW_0, &val);
val = (val & ~SWx_VOLT_MASK_MC34708) | SWx_1_250V_MC34708;
OpenPOWER on IntegriCloud