diff options
Diffstat (limited to 'board/freescale/m54455evb/README')
| -rw-r--r-- | board/freescale/m54455evb/README | 10 |
1 files changed, 5 insertions, 5 deletions
diff --git a/board/freescale/m54455evb/README b/board/freescale/m54455evb/README index c70c4c5c25..c563ad99a7 100644 --- a/board/freescale/m54455evb/README +++ b/board/freescale/m54455evb/README @@ -48,7 +48,7 @@ Changed files: - include/asm-m68k/timer.h Timer structure and definition - include/asm-m68k/types.h Data types definition - include/asm-m68k/uart.h Uart structure and definition -- include/asm-m68k/u-boot.h u-boot structure +- include/asm-m68k/u-boot.h U-Boot structure - include/configs/M54455EVB.h Board specific configuration file @@ -78,7 +78,7 @@ CONFIG_MCFRTC -- define to use common CF RTC driver CONFIG_SYS_MCFRTC_BASE -- provide base address for RTC in immap.h CONFIG_SYS_RTC_OSCILLATOR -- define RTC clock frequency RTC_DEBUG -- define to show RTC debug message -CONFIG_CMD_DATE -- enable to use date feature in u-boot +CONFIG_CMD_DATE -- enable to use date feature in U-Boot CONFIG_MCFFEC -- define to use common CF FEC driver CONFIG_MII -- enable to use MII driver @@ -91,7 +91,7 @@ CONFIG_SYS_FEC1_PINMUX -- Set FEC1 Pin configuration CONFIG_SYS_FEC0_MIIBASE -- Set FEC0 MII base register CONFIG_SYS_FEC1_MIIBASE -- Set FEC0 MII base register MCFFEC_TOUT_LOOP -- set FEC timeout loop -CONFIG_HAS_ETH1 -- define to enable second FEC in u-boot +CONFIG_HAS_ETH1 -- define to enable second FEC in U-Boot CONFIG_ISO_PARTITION -- enable ISO read/write CONFIG_DOS_PARTITION -- enable DOS read/write @@ -136,7 +136,7 @@ CONFIG_EXTRA_CLOCK -- Enable extra clock such as vco, flexbus, pci, etc CONFIG_SYS_MBAR -- define MBAR offset -CONFIG_SYS_ATMEL_BOOT -- To determine the u-boot is booted from Atmel or Intel +CONFIG_SYS_ATMEL_BOOT -- To determine the U-Boot is booted from Atmel or Intel CONFIG_MONITOR_IS_IN_RAM -- Not support @@ -163,7 +163,7 @@ CONFIG_SYS_SDRAM_BASE1 -- defines the DRAM Base 1 FlexBus: 0xC0000000-0xDFFFFFFF (512MB) IP: 0xF0000000-0xFFFFFFFF (256MB) -2.2. For the initial bringup, we adopted a consistent memory scheme between u-boot and +2.2. For the initial bringup, we adopted a consistent memory scheme between U-Boot and linux kernel, you can customize it based on your system requirements: Atmel boot: Flash0: 0x00000000-0x0007FFFF (512KB) |
