summaryrefslogtreecommitdiffstats
path: root/board/freescale/m53017evb/README
diff options
context:
space:
mode:
Diffstat (limited to 'board/freescale/m53017evb/README')
-rw-r--r--board/freescale/m53017evb/README180
1 files changed, 180 insertions, 0 deletions
diff --git a/board/freescale/m53017evb/README b/board/freescale/m53017evb/README
new file mode 100644
index 0000000000..64a3d42f0c
--- /dev/null
+++ b/board/freescale/m53017evb/README
@@ -0,0 +1,180 @@
+Freescale MCF53017EVB ColdFire Development Board
+================================================
+
+TsiChung Liew(Tsi-Chung.Liew@freescale.com)
+Created 10/22/08
+===========================================
+
+
+Changed files:
+==============
+
+- board/freescale/m53017evb/m53017evb.c Dram setup
+- board/freescale/m53017evb/mii.c Mii access
+- board/freescale/m53017evb/Makefile Makefile
+- board/freescale/m53017evb/config.mk config make
+- board/freescale/m53017evb/u-boot.lds Linker description
+
+- arch/m68k/cpu/mcf532x/cpu.c cpu specific code
+- arch/m68k/cpu/mcf532x/cpu_init.c FBCS, Mux pins, icache and RTC extra regs
+- arch/m68k/cpu/mcf532x/interrupts.c cpu specific interrupt support
+- arch/m68k/cpu/mcf532x/speed.c system, flexbus, and cpu clock
+- arch/m68k/cpu/mcf532x/Makefile Makefile
+- arch/m68k/cpu/mcf532x/config.mk config make
+- arch/m68k/cpu/mcf532x/start.S start up assembly code
+
+- doc/README.m53017evb This readme file
+
+- drivers/net/mcffec.c ColdFire common FEC driver
+- drivers/net/mcfmii.c ColdFire common Mii driver
+- drivers/serial/mcfuart.c ColdFire common UART driver
+- drivers/rtc/mcfrtc.c Realtime clock Driver
+
+- include/asm-m68k/bitops.h Bit operation function export
+- include/asm-m68k/byteorder.h Byte order functions
+- include/asm-m68k/fec.h FEC structure and definition
+- include/asm-m68k/fsl_i2c.h I2C structure and definition
+- include/asm-m68k/global_data.h Global data structure
+- include/asm-m68k/immap.h ColdFire specific header file and driver macros
+- include/asm-m68k/immap_5301x.h mcf5301x specific header file
+- include/asm-m68k/io.h io functions
+- include/asm-m68k/m532x.h mcf5301x specific header file
+- include/asm-m68k/posix_types.h Posix
+- include/asm-m68k/processor.h header file
+- include/asm-m68k/ptrace.h Exception structure
+- include/asm-m68k/rtc.h Realtime clock header file
+- include/asm-m68k/string.h String function export
+- include/asm-m68k/timer.h Timer structure and definition
+- include/asm-m68k/types.h Data types definition
+- include/asm-m68k/uart.h Uart structure and definition
+- include/asm-m68k/u-boot.h u-boot structure
+
+- include/configs/M53017EVB.h Board specific configuration file
+
+- arch/m68k/lib/board.c board init function
+- arch/m68k/lib/cache.c
+- arch/m68k/lib/interrupts Coldfire common interrupt functions
+- arch/m68k/lib/m68k_linux.c
+- arch/m68k/lib/time.c Timer functions (Dma timer and PIT)
+- arch/m68k/lib/traps.c Exception init code
+
+1 MCF5301x specific Options/Settings
+====================================
+1.1 pre-loader is no longer suppoer in thie coldfire family
+
+1.2 Configuration settings for M53017EVB Development Board
+CONFIG_MCF5301x -- define for all MCF5301x CPUs
+CONFIG_M53015 -- define for MCF53015 CPUs
+CONFIG_M53017EVB -- define for M53017EVB board
+
+CONFIG_MCFUART -- define to use common CF Uart driver
+CONFIG_SYS_UART_PORT -- define UART port number, start with 0, 1 and 2
+CONFIG_BAUDRATE -- define UART baudrate
+
+CONFIG_MCFRTC -- define to use common CF RTC driver
+CONFIG_SYS_MCFRTC_BASE -- provide base address for RTC in immap.h
+CONFIG_SYS_RTC_OSCILLATOR -- define RTC clock frequency
+RTC_DEBUG -- define to show RTC debug message
+CONFIG_CMD_DATE -- enable to use date feature in u-boot
+
+CONFIG_MCFFEC -- define to use common CF FEC driver
+CONFIG_MII -- enable to use MII driver
+CONFIG_CF_DOMII -- enable to use MII feature in cmd_mii.c
+CONFIG_SYS_DISCOVER_PHY -- enable PHY discovery
+CONFIG_SYS_RX_ETH_BUFFER -- Set FEC Receive buffer
+CONFIG_SYS_FAULT_ECHO_LINK_DOWN --
+CONFIG_SYS_FEC0_PINMUX -- Set FEC0 Pin configuration
+CONFIG_SYS_FEC0_MIIBASE -- Set FEC0 MII base register
+MCFFEC_TOUT_LOOP -- set FEC timeout loop
+
+CONFIG_MCFTMR -- define to use DMA timer
+CONFIG_MCFPIT -- define to use PIT timer
+
+CONFIG_FSL_I2C -- define to use FSL common I2C driver
+CONFIG_HARD_I2C -- define for I2C hardware support
+CONFIG_SOFT_I2C -- define for I2C bit-banged
+CONFIG_SYS_I2C_SPEED -- define for I2C speed
+CONFIG_SYS_I2C_SLAVE -- define for I2C slave address
+CONFIG_SYS_I2C_OFFSET -- define for I2C base address offset
+CONFIG_SYS_IMMR -- define for MBAR offset
+
+CONFIG_SYS_MBAR -- define MBAR offset
+
+CONFIG_MONITOR_IS_IN_RAM -- Not support
+
+CONFIG_SYS_INIT_RAM_ADDR -- defines the base address of the MCF5301x internal SRAM
+
+CONFIG_SYS_CSn_BASE -- defines the Chip Select Base register
+CONFIG_SYS_CSn_MASK -- defines the Chip Select Mask register
+CONFIG_SYS_CSn_CTRL -- defines the Chip Select Control register
+
+CONFIG_SYS_SDRAM_BASE -- defines the DRAM Base
+
+2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
+===========================================
+2.1. System memory map:
+ Flash: 0x00000000-0x3FFFFFFF (1024MB)
+ DDR: 0x40000000-0x7FFFFFFF (1024MB)
+ SRAM: 0x80000000-0x8FFFFFFF (256MB)
+ IP: 0xFC000000-0xFFFFFFFF (256MB)
+
+2.2. For the initial bringup, we adopted a consistent memory scheme between u-boot and
+ linux kernel, you can customize it based on your system requirements:
+ Flash0: 0x00000000-0x00FFFFFF (16MB)
+ DDR: 0x40000000-0x4FFFFFFF (256MB)
+ SRAM: 0x80000000-0x80007FFF (32KB)
+ IP: 0xFC000000-0xFC0FFFFF (64KB)
+
+3. COMPILATION
+==============
+3.1 To create U-Boot the gcc-4.x-xx compiler set (ColdFire ELF or
+uClinux version) from codesourcery.com was used. Download it from:
+http://www.codesourcery.com/gnu_toolchains/coldfire/download.html
+
+3.2 Compilation
+ export CROSS_COMPILE=cross-compile-prefix
+ cd u-boot
+ make distclean
+ make M53017EVB_config
+ make
+
+4. SCREEN DUMP
+==============
+4.1 M53017EVB Development board
+ (NOTE: May not show exactly the same)
+
+U-Boot 2008.10 (Oct 22 2007 - 11:07:57)
+
+CPU: Freescale MCF53015 (Mask:76 Version:0)
+ CPU CLK 240 Mhz BUS CLK 80 Mhz
+Board: Freescale M53017EVB
+I2C: ready
+DRAM: 64 MB
+FLASH: 16 MB
+In: serial
+Out: serial
+Err: serial
+NAND: 16 MiB
+Net: FEC0, FEC1
+-> print
+bootdelay=1
+baudrate=115200
+ethaddr=00:e0:0c:bc:e5:60
+hostname=M53017EVB
+netdev=eth0
+loadaddr=40010000
+u-boot=u-boot.bin
+load=tftp ${loadaddr) ${u-boot}
+upd=run load; run prog
+prog=prot off 0 3ffff;era 0 3ffff;cp.b ${loadaddr} 0 ${filesize};save
+gatewayip=192.168.1.1
+netmask=255.255.255.0
+ipaddr=192.168.1.3
+serverip=192.168.1.2
+stdin=serial
+stdout=serial
+stderr=serial
+mem=65024k
+
+Environment size: 437/4092 bytes
+->
OpenPOWER on IntegriCloud