summaryrefslogtreecommitdiffstats
path: root/board/freescale/ls1043aqds
diff options
context:
space:
mode:
Diffstat (limited to 'board/freescale/ls1043aqds')
-rw-r--r--board/freescale/ls1043aqds/README37
-rw-r--r--board/freescale/ls1043aqds/ddr.c1
-rw-r--r--board/freescale/ls1043aqds/ddr.h30
-rw-r--r--board/freescale/ls1043aqds/ls1043aqds.c16
4 files changed, 21 insertions, 63 deletions
diff --git a/board/freescale/ls1043aqds/README b/board/freescale/ls1043aqds/README
index a6fd7a35f5..913537d451 100644
--- a/board/freescale/ls1043aqds/README
+++ b/board/freescale/ls1043aqds/README
@@ -8,41 +8,8 @@ debugging environment.
LS1043A SoC Overview
--------------------
-The LS1043A integrated multicore processor combines four ARM Cortex-A53
-processor cores with datapath acceleration optimized for L2/3 packet
-processing, single pass security offload and robust traffic management
-and quality of service.
-
-The LS1043A SoC includes the following function and features:
- - Four 64-bit ARM Cortex-A53 CPUs
- - 1 MB unified L2 Cache
- - One 32-bit DDR3L/DDR4 SDRAM memory controllers with ECC and interleaving
- support
- - Data Path Acceleration Architecture (DPAA) incorporating acceleration the
- the following functions:
- - Packet parsing, classification, and distribution (FMan)
- - Queue management for scheduling, packet sequencing, and congestion
- management (QMan)
- - Hardware buffer management for buffer allocation and de-allocation (BMan)
- - Cryptography acceleration (SEC)
- - Ethernet interfaces by FMan
- - Up to 1 x XFI supporting 10G interface
- - Up to 1 x QSGMII
- - Up to 4 x SGMII supporting 1000Mbps
- - Up to 2 x SGMII supporting 2500Mbps
- - Up to 2 x RGMII supporting 1000Mbps
- - High-speed peripheral interfaces
- - Three PCIe 2.0 controllers, one supporting x4 operation
- - One serial ATA (SATA 3.0) controllers
- - Additional peripheral interfaces
- - Three high-speed USB 3.0 controllers with integrated PHY
- - Enhanced secure digital host controller (eSDXC/eMMC)
- - Quad Serial Peripheral Interface (QSPI) Controller
- - Serial peripheral interface (SPI) controller
- - Four I2C controllers
- - Two DUARTs
- - Integrated flash controller supporting NAND and NOR flash
- - QorIQ platform's trust architecture 2.1
+Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS1043A
+SoC overview.
LS1043AQDS board Overview
-----------------------
diff --git a/board/freescale/ls1043aqds/ddr.c b/board/freescale/ls1043aqds/ddr.c
index 3d3c53385a..0fd835d74f 100644
--- a/board/freescale/ls1043aqds/ddr.c
+++ b/board/freescale/ls1043aqds/ddr.c
@@ -116,6 +116,7 @@ phys_size_t initdram(int board_type)
dram_size = fsl_ddr_sdram();
#endif
+ erratum_a008850_post();
#ifdef CONFIG_FSL_DEEP_SLEEP
fsl_dp_ddr_restore();
diff --git a/board/freescale/ls1043aqds/ddr.h b/board/freescale/ls1043aqds/ddr.h
index 8adb660012..ad709ba216 100644
--- a/board/freescale/ls1043aqds/ddr.h
+++ b/board/freescale/ls1043aqds/ddr.h
@@ -7,6 +7,8 @@
#ifndef __DDR_H__
#define __DDR_H__
+extern void erratum_a008850_post(void);
+
struct board_specific_parameters {
u32 n_ranks;
u32 datarate_mhz_high;
@@ -32,21 +34,21 @@ static const struct board_specific_parameters udimm0[] = {
* ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay |
*/
#ifdef CONFIG_SYS_FSL_DDR4
- {2, 1666, 0, 4, 7, 0x0808090B, 0x0C0D0E0A,},
- {2, 1900, 0, 4, 6, 0x08080A0C, 0x0D0E0F0A,},
- {1, 1666, 0, 4, 6, 0x0708090B, 0x0C0D0E0A,},
- {1, 1900, 0, 4, 9, 0x0A0B0C0B, 0x0D0E0F0D,},
- {1, 2200, 0, 4, 10, 0x0B0C0D0C, 0x0E0F110E,},
+ {2, 1666, 0, 8, 7, 0x0808090B, 0x0C0D0E0A,},
+ {2, 1900, 0, 8, 6, 0x08080A0C, 0x0D0E0F0A,},
+ {1, 1666, 0, 8, 6, 0x0708090B, 0x0C0D0E0A,},
+ {1, 1900, 0, 8, 9, 0x0A0B0C0B, 0x0D0E0F0D,},
+ {1, 2200, 0, 8, 10, 0x0B0C0D0C, 0x0E0F110E,},
#elif defined(CONFIG_SYS_FSL_DDR3)
- {1, 833, 1, 6, 8, 0x06060607, 0x08080807, 0x1f, 2, 0},
- {1, 1350, 1, 6, 8, 0x0708080A, 0x0A0B0C09, 0x1f, 2, 0},
- {1, 833, 2, 6, 8, 0x06060607, 0x08080807, 0x1f, 2, 0},
- {1, 1350, 2, 6, 8, 0x0708080A, 0x0A0B0C09, 0x1f, 2, 0},
- {2, 833, 4, 6, 8, 0x06060607, 0x08080807, 0x1f, 2, 0},
- {2, 1350, 4, 6, 8, 0x0708080A, 0x0A0B0C09, 0x1f, 2, 0},
- {2, 1350, 0, 6, 8, 0x0708080A, 0x0A0B0C09, 0x1f, 2, 0},
- {2, 1666, 4, 4, 0xa, 0x0B08090C, 0x0B0E0D0A, 0x1f, 2, 0},
- {2, 1666, 0, 4, 0xa, 0x0B08090C, 0x0B0E0D0A, 0x1f, 2, 0},
+ {1, 833, 1, 12, 8, 0x06060607, 0x08080807, 0x1f, 2, 0},
+ {1, 1350, 1, 12, 8, 0x0708080A, 0x0A0B0C09, 0x1f, 2, 0},
+ {1, 833, 2, 12, 8, 0x06060607, 0x08080807, 0x1f, 2, 0},
+ {1, 1350, 2, 12, 8, 0x0708080A, 0x0A0B0C09, 0x1f, 2, 0},
+ {2, 833, 4, 12, 8, 0x06060607, 0x08080807, 0x1f, 2, 0},
+ {2, 1350, 4, 12, 8, 0x0708080A, 0x0A0B0C09, 0x1f, 2, 0},
+ {2, 1350, 0, 12, 8, 0x0708080A, 0x0A0B0C09, 0x1f, 2, 0},
+ {2, 1666, 4, 8, 0xa, 0x0B08090C, 0x0B0E0D0A, 0x1f, 2, 0},
+ {2, 1666, 0, 8, 0xa, 0x0B08090C, 0x0B0E0D0A, 0x1f, 2, 0},
#else
#error DDR type not defined
#endif
diff --git a/board/freescale/ls1043aqds/ls1043aqds.c b/board/freescale/ls1043aqds/ls1043aqds.c
index fba6b88951..7e47ef0d82 100644
--- a/board/freescale/ls1043aqds/ls1043aqds.c
+++ b/board/freescale/ls1043aqds/ls1043aqds.c
@@ -238,8 +238,8 @@ int board_early_init_f(void)
out_be32(&scfg->rcwpmuxcr0, 0x3333);
out_be32(&scfg->usbdrvvbus_selcr, SCFG_USBDRVVBUS_SELCR_USB1);
usb_pwrfault =
- (SCFG_USBPWRFAULT_SHARED << SCFG_USBPWRFAULT_USB3_SHIFT) |
- (SCFG_USBPWRFAULT_SHARED << SCFG_USBPWRFAULT_USB2_SHIFT) |
+ (SCFG_USBPWRFAULT_DEDICATED << SCFG_USBPWRFAULT_USB3_SHIFT) |
+ (SCFG_USBPWRFAULT_DEDICATED << SCFG_USBPWRFAULT_USB2_SHIFT) |
(SCFG_USBPWRFAULT_SHARED << SCFG_USBPWRFAULT_USB1_SHIFT);
out_be32(&scfg->usbpwrfault_selcr, usb_pwrfault);
#endif
@@ -307,14 +307,6 @@ int misc_init_r(void)
int board_init(void)
{
- struct ccsr_cci400 *cci = (struct ccsr_cci400 *)
- CONFIG_SYS_CCI400_ADDR;
-
- /* Set CCI-400 control override register to enable barrier
- * transaction */
- out_le32(&cci->ctrl_ord,
- CCI400_CTRLORD_EN_BARRIER);
-
select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
board_retimer_init();
@@ -325,10 +317,6 @@ int board_init(void)
#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
enable_layerscape_ns_access();
#endif
-
-#ifdef CONFIG_ENV_IS_NOWHERE
- gd->env_addr = (ulong)&default_environment[0];
-#endif
return 0;
}
OpenPOWER on IntegriCloud