1 files changed, 59 insertions, 0 deletions
diff --git a/board/freescale/ls1012aqds/README b/board/freescale/ls1012aqds/README
new file mode 100644
index 0000000000..dee4b302c1
--- /dev/null
+++ b/board/freescale/ls1012aqds/README
@@ -0,0 +1,59 @@
+Overview
+--------
+QorIQ LS1012A Development System (LS1012AQDS) is a high-performance
+development platform, with a complete debugging environment.
+The LS1012AQDS board supports the QorIQ LS1012A processor and is
+optimized to support the high-bandwidth DDR3L memory and
+a full complement of high-speed SerDes ports.
+
+LS1012A SoC Overview
+--------------------
+Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS1012A
+SoC overview.
+
+LS1012AQDS board Overview
+-----------------------
+ - SERDES Connections, 4 lanes supporting:
+      - PCI Express - 3.0
+      - SGMII, SGMII 2.5
+      - SATA 3.0
+ - DDR Controller
+     - 16-bit, 1 GB DDR3L SDRAM memory, running at data rates up to 1 GT/s
+ - QSPI Controller
+     - A dual 1:3 switch, NX3L4357GM,115 (U35) drives the QSPI chip-select
+       signals to QSPI NOR flash memory (2 virtual banks) and the QSPI
+       emulator
+ - USB 3.0
+    - One USB 3.0 controller with integrated PHY
+    - One high-speed USB 3.0 port
+ - USB 2.0
+    - One USB 2.0 controller with ULPI interface
+ - Two enhanced secure digital host controllers:
+    - SDHC1 controller can be connected to onboard SDHC connector
+    - SDHC2 controller: 1-/4-bit SD/MMC card supporting 1.8 V devices
+ - 2 I2C controllers
+ - One SATA onboard connectors
+ - UART
+ - 5 SAI
+    - One SAI port with audio codec SGTL5000:
+	• Provides MIC bias
+	• Provides headphone and line output
+    - One SAI port terminated at 2x6 header
+    - Three SAI Tx/Rx ports terminated at 2x3 headers
+ - ARM JTAG support
+
+Booting Options
+---------------
+a) QSPI Flash Emu Boot
+b) QSPI Flash 1
+c) QSPI Flash 2
+
+QSPI flash map
+--------------
+Images		| Size	|QSPI Flash Address
+------------------------------------------
+RCW + PBI	| 1MB	| 0x4000_0000
+U-boot 		| 1MB	| 0x4010_0000
+U-boot Env 	| 1MB	| 0x4020_0000
+PPA FIT image	| 2MB	| 0x4050_0000
+Linux ITB	| ~53MB | 0x40A0_0000