diff options
Diffstat (limited to 'board/esd/wuh405')
| -rw-r--r-- | board/esd/wuh405/u-boot.lds | 19 | ||||
| -rw-r--r-- | board/esd/wuh405/wuh405.c | 18 |
2 files changed, 9 insertions, 28 deletions
diff --git a/board/esd/wuh405/u-boot.lds b/board/esd/wuh405/u-boot.lds index e2e2512e75..005957eedb 100644 --- a/board/esd/wuh405/u-boot.lds +++ b/board/esd/wuh405/u-boot.lds @@ -57,22 +57,7 @@ SECTIONS .plt : { *(.plt) } .text : { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - cpu/ppc4xx/start.o (.text) - cpu/ppc4xx/traps.o (.text) - cpu/ppc4xx/interrupts.o (.text) - cpu/ppc4xx/4xx_uart.o (.text) - cpu/ppc4xx/cpu_init.o (.text) - cpu/ppc4xx/speed.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) - lib_ppc/extable.o (.text) - lib_generic/zlib.o (.text) - -/* . = env_offset;*/ -/* common/env_embedded.o(.text)*/ *(.text) *(.fixup) @@ -82,10 +67,8 @@ SECTIONS PROVIDE (etext = .); .rodata : { - *(.rodata) - *(.rodata1) - *(.rodata.str1.4) *(.eh_frame) + *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } .fini : { *(.fini) } =0 .ctors : { *(.ctors) } diff --git a/board/esd/wuh405/wuh405.c b/board/esd/wuh405/wuh405.c index 5eca3bd380..e330fff16c 100644 --- a/board/esd/wuh405/wuh405.c +++ b/board/esd/wuh405/wuh405.c @@ -82,10 +82,6 @@ int board_early_init_f (void) int misc_init_r (void) { - volatile unsigned char *duart0_mcr = (unsigned char *)((ulong)DUART0_BA + 4); - volatile unsigned char *duart1_mcr = (unsigned char *)((ulong)DUART1_BA + 4); - volatile unsigned char *duart2_mcr = (unsigned char *)((ulong)DUART2_BA + 4); - volatile unsigned char *duart3_mcr = (unsigned char *)((ulong)DUART3_BA + 4); unsigned char *dst; ulong len = sizeof(fpgadata); int status; @@ -155,18 +151,20 @@ int misc_init_r (void) /* * Reset external DUARTs */ - out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_DUART_RST); /* set reset to high */ + out_be32((void *)GPIO0_OR, + in_be32((void *)GPIO0_OR) | CONFIG_SYS_DUART_RST); udelay(10); /* wait 10us */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_DUART_RST); /* set reset to low */ + out_be32((void *)GPIO0_OR, + in_be32((void *)GPIO0_OR) & ~CONFIG_SYS_DUART_RST); udelay(1000); /* wait 1ms */ /* * Enable interrupts in exar duart mcr[3] */ - *duart0_mcr = 0x08; - *duart1_mcr = 0x08; - *duart2_mcr = 0x08; - *duart3_mcr = 0x08; + out_8((void *)(DUART0_BA + 4), 0x08); + out_8((void *)(DUART1_BA + 4), 0x08); + out_8((void *)(DUART2_BA + 4), 0x08); + out_8((void *)(DUART3_BA + 4), 0x08); return (0); } |
