diff options
Diffstat (limited to 'board/esd/pf5200/flash.c')
| -rw-r--r-- | board/esd/pf5200/flash.c | 445 |
1 files changed, 0 insertions, 445 deletions
diff --git a/board/esd/pf5200/flash.c b/board/esd/pf5200/flash.c deleted file mode 100644 index e1b13bfc44..0000000000 --- a/board/esd/pf5200/flash.c +++ /dev/null @@ -1,445 +0,0 @@ -/* - * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -typedef unsigned short FLASH_PORT_WIDTH; -typedef volatile unsigned short FLASH_PORT_WIDTHV; - -#define FLASH_ID_MASK 0x00FF - -#define FPW FLASH_PORT_WIDTH -#define FPWV FLASH_PORT_WIDTHV - -#define FLASH_CYCLE1 0x0555 -#define FLASH_CYCLE2 0x0aaa -#define FLASH_ID1 0x00 -#define FLASH_ID2 0x01 -#define FLASH_ID3 0x0E -#define FLASH_ID4 0x0F - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size(FPWV * addr, flash_info_t * info); -static void flash_reset(flash_info_t * info); -static int write_word_amd(flash_info_t * info, FPWV * dest, FPW data); -static flash_info_t *flash_get_info(ulong base); - -/*----------------------------------------------------------------------- - * flash_init() - * - * sets up flash_info and returns size of FLASH (bytes) - */ -unsigned long flash_init(void) -{ - unsigned long size = 0; - int i = 0; - extern void flash_preinit(void); - extern void flash_afterinit(uint, ulong, ulong); - - ulong flashbase = CONFIG_SYS_FLASH_BASE; - - flash_preinit(); - - /* There is only ONE FLASH device */ - memset(&flash_info[i], 0, sizeof(flash_info_t)); - flash_info[i].size = flash_get_size((FPW *) flashbase, &flash_info[i]); - size += flash_info[i].size; - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE - /* monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, - flash_get_info(CONFIG_SYS_MONITOR_BASE)); -#endif - -#ifdef CONFIG_ENV_IS_IN_FLASH - /* ENV protection ON by default */ - flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, - flash_get_info(CONFIG_ENV_ADDR)); -#endif - - flash_afterinit(i, flash_info[i].start[0], flash_info[i].size); - return size ? size : 1; -} - -/*----------------------------------------------------------------------- - */ -static void flash_reset(flash_info_t * info) { - FPWV *base = (FPWV *) (info->start[0]); - - /* Put FLASH back in read mode */ - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) { - *base = (FPW) 0x00FF00FF; /* Intel Read Mode */ - } else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD) { - *base = (FPW) 0x00F000F0; /* AMD Read Mode */ - } -} - -/*----------------------------------------------------------------------- - */ - -static flash_info_t *flash_get_info(ulong base) { - int i; - flash_info_t *info; - - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - info = &flash_info[i]; - if ((info->size) && (info->start[0] <= base) - && (base <= info->start[0] + info->size - 1)) { - break; - } - } - return (i == CONFIG_SYS_MAX_FLASH_BANKS ? 0 : info); -} - -/*----------------------------------------------------------------------- - */ - -void flash_print_info(flash_info_t * info) { - int i; - char *fmt; - - if (info->flash_id == FLASH_UNKNOWN) { - printf("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: - printf("AMD "); - break; - default: - printf("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AMLV256U: - fmt = "29LV256M (256 Mbit)\n"; - break; - default: - fmt = "Unknown Chip Type\n"; - break; - } - - printf(fmt); - printf(" Size: %ld MB in %d Sectors\n", info->size >> 20, - info->sector_count); - printf(" Sector Start Addresses:"); - - for (i = 0; i < info->sector_count; ++i) { - ulong size; - int erased; - ulong *flash = (unsigned long *)info->start[i]; - - if ((i % 5) == 0) { - printf("\n "); - } - - /* - * Check if whole sector is erased - */ - size = - (i != - (info->sector_count - 1)) ? (info->start[i + 1] - - info->start[i]) >> 2 : (info-> - start - [0] + - info-> - size - - info-> - start - [i]) - >> 2; - - for (flash = (unsigned long *)info->start[i], erased = 1; - (flash != (unsigned long *)info->start[i] + size) - && erased; flash++) { - erased = *flash == ~0x0UL; - } - printf(" %08lX %s %s", info->start[i], erased ? "E" : " ", - info->protect[i] ? "(RO)" : " "); - } - - printf("\n"); -} - -/*----------------------------------------------------------------------- - */ - -/* - * The following code cannot be run from FLASH! - */ - -ulong flash_get_size(FPWV * addr, flash_info_t * info) { - int i; - - /* Write auto select command: read Manufacturer ID */ - /* Write auto select command sequence and test FLASH answer */ - addr[FLASH_CYCLE1] = (FPW) 0x00AA00AA; /* for AMD, Intel ignores this */ - addr[FLASH_CYCLE2] = (FPW) 0x00550055; /* for AMD, Intel ignores this */ - addr[FLASH_CYCLE1] = (FPW) 0x00900090; /* selects Intel or AMD */ - - /* The manufacturer codes are only 1 byte, so just use 1 byte. */ - /* This works for any bus width and any FLASH device width. */ - udelay(100); - switch (addr[FLASH_ID1] & 0x00ff) { - case (uchar) AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; - default: - printf("unknown vendor=%x ", addr[FLASH_ID1] & 0xff); - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - break; - } - - /* Check 16 bits or 32 bits of ID so work on 32 or 16 bit bus. */ - if (info->flash_id != FLASH_UNKNOWN) { - switch ((FPW) addr[FLASH_ID2]) { - case (FPW) AMD_ID_MIRROR: - /* MIRROR BIT FLASH, read more ID bytes */ - if ((FPW) addr[FLASH_ID3] == (FPW) AMD_ID_LV256U_2 - && (FPW) addr[FLASH_ID4] == (FPW) AMD_ID_LV256U_3) { - /* attention: only the first 16 MB will be used in u-boot */ - info->flash_id += FLASH_AMLV256U; - info->sector_count = 512; - info->size = 0x02000000; - for (i = 0; i < info->sector_count; i++) { - info->start[i] = - (ulong) addr + 0x10000 * i; - } - break; - } - /* fall thru to here ! */ - default: - printf("unknown AMD device=%x %x %x", - (FPW) addr[FLASH_ID2], (FPW) addr[FLASH_ID3], - (FPW) addr[FLASH_ID4]); - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0x800000; - break; - } - - /* Put FLASH back in read mode */ - flash_reset(info); - } - return (info->size); -} - -/*----------------------------------------------------------------------- - */ - -int flash_erase(flash_info_t * info, int s_first, int s_last) { - FPWV *addr; - int flag, prot, sect; - int intel = (info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL; - ulong start, now, last; - int rcode = 0; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf("- missing\n"); - } else { - printf("- no sectors to erase\n"); - } - return 1; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AMLV256U: - break; - case FLASH_UNKNOWN: - default: - printf("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf("\n"); - } - - last = get_timer(0); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last && rcode == 0; sect++) { - if (info->protect[sect] != 0) { /* protected, skip it */ - continue; - } - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr = (FPWV *) (info->start[sect]); - if (intel) { - *addr = (FPW) 0x00500050; /* clear status register */ - *addr = (FPW) 0x00200020; /* erase setup */ - *addr = (FPW) 0x00D000D0; /* erase confirm */ - } else { - /* must be AMD style if not Intel */ - FPWV *base; /* first address in bank */ - - base = (FPWV *) (info->start[0]); - base[FLASH_CYCLE1] = (FPW) 0x00AA00AA; /* unlock */ - base[FLASH_CYCLE2] = (FPW) 0x00550055; /* unlock */ - base[FLASH_CYCLE1] = (FPW) 0x00800080; /* erase mode */ - base[FLASH_CYCLE1] = (FPW) 0x00AA00AA; /* unlock */ - base[FLASH_CYCLE2] = (FPW) 0x00550055; /* unlock */ - *addr = (FPW) 0x00300030; /* erase sector */ - } - - /* re-enable interrupts if necessary */ - if (flag) { - enable_interrupts(); - } - start = get_timer(0); - - /* wait at least 50us for AMD, 80us for Intel. */ - /* Let's wait 1 ms. */ - udelay(1000); - - while ((*addr & (FPW) 0x00800080) != (FPW) 0x00800080) { - if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf("Timeout\n"); - if (intel) { - /* suspend erase */ - *addr = (FPW) 0x00B000B0; - } - flash_reset(info); /* reset to read mode */ - rcode = 1; /* failed */ - break; - } - /* show that we're waiting */ - if ((get_timer(last)) > CONFIG_SYS_HZ) { - /* every second */ - putc('.'); - last = get_timer(0); - } - } - /* show that we're waiting */ - if ((get_timer(last)) > CONFIG_SYS_HZ) { - /* every second */ - putc('.'); - last = get_timer(0); - } - flash_reset(info); /* reset to read mode */ - } - printf(" done\n"); - return (rcode); -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - FPW data = 0; /* 16 or 32 bit word, matches flash bus width on MPC8XX */ - int bytes; /* number of bytes to program in current word */ - int left; /* number of bytes left to program */ - int i, res; - - for (left = cnt, res = 0; - left > 0 && res == 0; - addr += sizeof(data), left -= sizeof(data) - bytes) { - - bytes = addr & (sizeof(data) - 1); - addr &= ~(sizeof(data) - 1); - - /* combine source and destination data so can program - * an entire word of 16 or 32 bits - */ - for (i = 0; i < sizeof(data); i++) { - data <<= 8; - if (i < bytes || i - bytes >= left) - data += *((uchar *) addr + i); - else - data += *src++; - } - - /* write one word to the flash */ - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: - res = write_word_amd(info, (FPWV *) addr, data); - break; - default: - /* unknown flash type, error! */ - printf("missing or unknown FLASH type\n"); - res = 1; /* not really a timeout, but gives error */ - break; - } - } - return (res); -} - -/*----------------------------------------------------------------------- - * Write a word to Flash for AMD FLASH - * A word is 16 or 32 bits, whichever the bus width of the flash bank - * (not an individual chip) is. - * - * returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word_amd(flash_info_t * info, FPWV * dest, FPW data) { - ulong start; - int flag; - int res = 0; /* result, assume success */ - FPWV *base; /* first address in flash bank */ - - /* Check if Flash is (sufficiently) erased */ - if ((*dest & data) != data) { - return (2); - } - - base = (FPWV *) (info->start[0]); - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - base[FLASH_CYCLE1] = (FPW) 0x00AA00AA; /* unlock */ - base[FLASH_CYCLE2] = (FPW) 0x00550055; /* unlock */ - base[FLASH_CYCLE1] = (FPW) 0x00A000A0; /* selects program mode */ - - *dest = data; /* start programming the data */ - - /* re-enable interrupts if necessary */ - if (flag) { - enable_interrupts(); - } - start = get_timer(0); - - /* data polling for D7 */ - while (res == 0 - && (*dest & (FPW) 0x00800080) != (data & (FPW) 0x00800080)) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - *dest = (FPW) 0x00F000F0; /* reset bank */ - res = 1; - } - } - return (res); -} |
