1 files changed, 0 insertions, 187 deletions
diff --git a/board/esd/du405/du405.c b/board/esd/du405/du405.c
deleted file mode 100644
index 8f5f4d02a8..0000000000
--- a/board/esd/du405/du405.c
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- * (C) Copyright 2000, 2001
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include "du405.h"
-#include <asm/processor.h>
-#include <asm/ppc4xx.h>
-#include <asm/ppc4xx-i2c.h>
-#include <command.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern void lxt971_no_sleep(void);
-
-
-#if 0
-#define FPGA_DEBUG
-#endif
-
-#if 0
-#define FPGA_DEBUG2
-#endif
-
-/* fpga configuration data - generated by bin2cc */
-const unsigned char fpgadata[] = {
-#include "fpgadata.c"
-};
-
-/*
- * include common fpga code (for esd boards)
- */
-#include "../common/fpga.c"
-
-
-int board_early_init_f (void)
-{
-	int index, len, i;
-	int status;
-
-#ifdef FPGA_DEBUG
-	/* set up serial port with default baudrate */
-	(void) get_clocks ();
-	gd->baudrate = CONFIG_BAUDRATE;
-	serial_init ();
-	console_init_f ();
-#endif
-
-	/*
-	 * Boot onboard FPGA
-	 */
-	status = fpga_boot ((unsigned char *) fpgadata, sizeof (fpgadata));
-	if (status != 0) {
-		/* booting FPGA failed */
-#ifndef FPGA_DEBUG
-		/* set up serial port with default baudrate */
-		(void) get_clocks ();
-		gd->baudrate = CONFIG_BAUDRATE;
-		serial_init ();
-		console_init_f ();
-#endif
-		printf ("\nFPGA: Booting failed ");
-		switch (status) {
-		case ERROR_FPGA_PRG_INIT_LOW:
-			printf ("(Timeout: INIT not low after asserting PROGRAM*)\n ");
-			break;
-		case ERROR_FPGA_PRG_INIT_HIGH:
-			printf ("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
-			break;
-		case ERROR_FPGA_PRG_DONE:
-			printf ("(Timeout: DONE not high after programming FPGA)\n ");
-			break;
-		}
-
-		/* display infos on fpgaimage */
-		index = 15;
-		for (i = 0; i < 4; i++) {
-			len = fpgadata[index];
-			printf ("FPGA: %s\n", &(fpgadata[index + 1]));
-			index += len + 3;
-		}
-		putc ('\n');
-		/* delayed reboot */
-		for (i = 20; i > 0; i--) {
-			printf ("Rebooting in %2d seconds \r", i);
-			for (index = 0; index < 1000; index++)
-				udelay (1000);
-		}
-		putc ('\n');
-		do_reset (NULL, 0, 0, NULL);
-	}
-
-	/*
-	 * IRQ 0-15  405GP internally generated; active high; level sensitive
-	 * IRQ 16    405GP internally generated; active low; level sensitive
-	 * IRQ 17-24 RESERVED
-	 * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
-	 * IRQ 26 (EXT IRQ 1) DUART_A; active high; level sensitive
-	 * IRQ 27 (EXT IRQ 2) DUART_B; active high; level sensitive
-	 * IRQ 28 (EXT IRQ 3) unused; active low; level sensitive
-	 * IRQ 29 (EXT IRQ 4) unused; active low; level sensitive
-	 * IRQ 30 (EXT IRQ 5) unused; active low; level sensitive
-	 * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
-	 */
-	mtdcr (UIC0SR, 0xFFFFFFFF);	/* clear all ints */
-	mtdcr (UIC0ER, 0x00000000);	/* disable all ints */
-	mtdcr (UIC0CR, 0x00000000);	/* set all to be non-critical */
-	mtdcr (UIC0PR, 0xFFFFFFB1);	/* set int polarities */
-	mtdcr (UIC0TR, 0x10000000);	/* set int trigger levels */
-	mtdcr (UIC0VCR, 0x00000001);	/* set vect base=0,INT0 highest priority */
-	mtdcr (UIC0SR, 0xFFFFFFFF);	/* clear all ints */
-
-	/*
-	 * EBC Configuration Register: set ready timeout to 100 us
-	 */
-	mtebc (EBC0_CFG, 0xb8400000);
-
-	return 0;
-}
-
-
-int misc_init_r (void)
-{
-	unsigned long CPC0_CR0Reg;
-
-	/*
-	 * Setup UART1 handshaking: use CTS instead of DSR
-	 */
-	CPC0_CR0Reg = mfdcr(CPC0_CR0);
-	mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x00001000);
-
-	return (0);
-}
-
-
-/*
- * Check Board Identity:
- */
-int checkboard (void)
-{
-	int index;
-	int len;
-	char str[64];
-	int i = getenv_f("serial#", str, sizeof (str));
-
-	puts ("Board: ");
-
-	if (i == -1) {
-		puts ("### No HW ID - assuming DU405");
-	} else {
-		puts (str);
-	}
-
-	puts ("\nFPGA:  ");
-
-	/* display infos on fpgaimage */
-	index = 15;
-	for (i = 0; i < 4; i++) {
-		len = fpgadata[index];
-		printf ("%s ", &(fpgadata[index + 1]));
-		index += len + 3;
-	}
-
-	putc ('\n');
-
-	/*
-	 * Reset external DUART via FPGA
-	 */
-	out_8((void *)FPGA_MODE_REG, 0xff); /* reset high active */
-	out_8((void *)FPGA_MODE_REG, 0x00); /* low again */
-
-	return 0;
-}
-
-void reset_phy(void)
-{
-#if defined(CONFIG_LXT971_NO_SLEEP)
-
-	/*
-	 * Disable sleep mode in LXT971
-	 */
-	lxt971_no_sleep();
-#endif
-}