summaryrefslogtreecommitdiffstats
path: root/board/dave/common/pci.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/dave/common/pci.c')
-rw-r--r--board/dave/common/pci.c186
1 files changed, 0 insertions, 186 deletions
diff --git a/board/dave/common/pci.c b/board/dave/common/pci.c
deleted file mode 100644
index 71bc8ac096..0000000000
--- a/board/dave/common/pci.c
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- * (C) Copyright 2001
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/ppc4xx.h>
-#include <asm/processor.h>
-#include <pci.h>
-
-
-u_long pci9054_iobase;
-
-
-#define PCI_PRIMARY_CAR (0x500000dc) /* PCI config address reg */
-#define PCI_PRIMARY_CDR (0x80000000) /* PCI config data reg */
-
-
-/*-----------------------------------------------------------------------------+
-| Subroutine: pci9054_read_config_dword
-| Description: Read a PCI configuration register
-| Inputs:
-| hose PCI Controller
-| dev PCI Bus+Device+Function number
-| offset Configuration register number
-| value Address of the configuration register value
-| Return value:
-| 0 Successful
-+-----------------------------------------------------------------------------*/
-int pci9054_read_config_dword(struct pci_controller *hose,
- pci_dev_t dev, int offset, u32* value)
-{
- unsigned long conAdrVal;
- unsigned long val;
-
- /* generate coded value for CON_ADR register */
- conAdrVal = dev | (offset & 0xfc) | 0x80000000;
-
- /* Load the CON_ADR (CAR) value first, then read from CON_DATA (CDR) */
- *(unsigned long *)PCI_PRIMARY_CAR = conAdrVal;
-
- /* Note: *pResult comes back as -1 if machine check happened */
- val = in32r(PCI_PRIMARY_CDR);
-
- *value = (unsigned long) val;
-
- out32r(PCI_PRIMARY_CAR, 0);
-
- if ((*(unsigned long *)0x50000304) & 0x60000000)
- {
- /* clear pci master/target abort bits */
- *(unsigned long *)0x50000304 = *(unsigned long *)0x50000304;
- }
-
- return 0;
-}
-
-/*-----------------------------------------------------------------------------+
-| Subroutine: pci9054_write_config_dword
-| Description: Write a PCI configuration register.
-| Inputs:
-| hose PCI Controller
-| dev PCI Bus+Device+Function number
-| offset Configuration register number
-| Value Configuration register value
-| Return value:
-| 0 Successful
-| Updated for pass2 errata #6. Need to disable interrupts and clear the
-| PCICFGADR reg after writing the PCICFGDATA reg.
-+-----------------------------------------------------------------------------*/
-int pci9054_write_config_dword(struct pci_controller *hose,
- pci_dev_t dev, int offset, u32 value)
-{
- unsigned long conAdrVal;
-
- conAdrVal = dev | (offset & 0xfc) | 0x80000000;
-
- *(unsigned long *)PCI_PRIMARY_CAR = conAdrVal;
-
- out32r(PCI_PRIMARY_CDR, value);
-
- out32r(PCI_PRIMARY_CAR, 0);
-
- /* clear pci master/target abort bits */
- *(unsigned long *)0x50000304 = *(unsigned long *)0x50000304;
-
- return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
-
-#ifdef CONFIG_DASA_SIM
-static void pci_dasa_sim_config_pci9054(struct pci_controller *hose, pci_dev_t dev,
- struct pci_config_table *_)
-{
- unsigned int iobase;
- unsigned short status = 0;
- unsigned char timer;
-
- /*
- * Configure PLX PCI9054
- */
- pci_read_config_word(CONFIG_SYS_PCI9054_DEV_FN, PCI_COMMAND, &status);
- status |= PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
- pci_write_config_word(CONFIG_SYS_PCI9054_DEV_FN, PCI_COMMAND, status);
-
- /* Check the latency timer for values >= 0x60.
- */
- pci_read_config_byte(CONFIG_SYS_PCI9054_DEV_FN, PCI_LATENCY_TIMER, &timer);
- if (timer < 0x60)
- {
- pci_write_config_byte(CONFIG_SYS_PCI9054_DEV_FN, PCI_LATENCY_TIMER, 0x60);
- }
-
- /* Set I/O base register.
- */
- pci_write_config_dword(CONFIG_SYS_PCI9054_DEV_FN, PCI_BASE_ADDRESS_0, CONFIG_SYS_PCI9054_IOBASE);
- pci_read_config_dword(CONFIG_SYS_PCI9054_DEV_FN, PCI_BASE_ADDRESS_0, &iobase);
-
- pci9054_iobase = pci_mem_to_phys(CONFIG_SYS_PCI9054_DEV_FN, iobase & PCI_BASE_ADDRESS_MEM_MASK);
-
- if (pci9054_iobase == 0xffffffff)
- {
- printf("Error: Can not set I/O base register.\n");
- return;
- }
-}
-#endif
-
-static struct pci_config_table pci9054_config_table[] = {
-#ifndef CONFIG_PCI_PNP
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_BUS(CONFIG_SYS_ETH_DEV_FN), PCI_DEV(CONFIG_SYS_ETH_DEV_FN), PCI_FUNC(CONFIG_SYS_ETH_DEV_FN),
- pci_cfgfunc_config_device, { CONFIG_SYS_ETH_IOBASE,
- CONFIG_SYS_ETH_IOBASE,
- PCI_COMMAND_IO | PCI_COMMAND_MASTER }},
-#ifdef CONFIG_DASA_SIM
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_BUS(CONFIG_SYS_PCI9054_DEV_FN), PCI_DEV(CONFIG_SYS_PCI9054_DEV_FN), PCI_FUNC(CONFIG_SYS_PCI9054_DEV_FN),
- pci_dasa_sim_config_pci9054 },
-#endif
-#endif
- { }
-};
-
-static struct pci_controller pci9054_hose = {
- config_table: pci9054_config_table,
-};
-
-void pci_init(void)
-{
- struct pci_controller *hose = &pci9054_hose;
-
- /*
- * Register the hose
- */
- hose->first_busno = 0;
- hose->last_busno = 0xff;
-
- /* System memory space */
- pci_set_region(hose->regions + 0,
- 0x00000000, 0x00000000, 0x01000000,
- PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
-
- /* PCI Memory space */
- pci_set_region(hose->regions + 1,
- 0x00000000, 0xc0000000, 0x10000000,
- PCI_REGION_MEM);
-
- pci_set_ops(hose,
- pci_hose_read_config_byte_via_dword,
- pci_hose_read_config_word_via_dword,
- pci9054_read_config_dword,
- pci_hose_write_config_byte_via_dword,
- pci_hose_write_config_word_via_dword,
- pci9054_write_config_dword);
-
- hose->region_count = 2;
-
- pci_register_hose(hose);
-
- hose->last_busno = pci_hose_scan(hose);
-}
OpenPOWER on IntegriCloud