diff options
Diffstat (limited to 'board/compulab/cm_t35/cm_t35.c')
| -rw-r--r-- | board/compulab/cm_t35/cm_t35.c | 176 |
1 files changed, 20 insertions, 156 deletions
diff --git a/board/compulab/cm_t35/cm_t35.c b/board/compulab/cm_t35/cm_t35.c index 0944903ec8..886c723900 100644 --- a/board/compulab/cm_t35/cm_t35.c +++ b/board/compulab/cm_t35/cm_t35.c @@ -19,12 +19,11 @@ #include <i2c.h> #include <usb.h> #include <mmc.h> -#include <nand.h> #include <twl4030.h> -#include <bmp_layout.h> #include <linux/compiler.h> #include <asm/io.h> +#include <asm/errno.h> #include <asm/arch/mem.h> #include <asm/arch/mux.h> #include <asm/arch/mmc_host_def.h> @@ -33,6 +32,7 @@ #include <asm/ehci-omap.h> #include <asm/gpio.h> +#include "../common/common.h" #include "../common/eeprom.h" DECLARE_GLOBAL_DATA_PTR; @@ -43,68 +43,6 @@ const omap3_sysinfo sysinfo = { "NAND", }; -static u32 gpmc_net_config[GPMC_MAX_REG] = { - NET_GPMC_CONFIG1, - NET_GPMC_CONFIG2, - NET_GPMC_CONFIG3, - NET_GPMC_CONFIG4, - NET_GPMC_CONFIG5, - NET_GPMC_CONFIG6, - 0 -}; - -static u32 gpmc_nand_config[GPMC_MAX_REG] = { - M_NAND_GPMC_CONFIG1, - M_NAND_GPMC_CONFIG2, - M_NAND_GPMC_CONFIG3, - M_NAND_GPMC_CONFIG4, - M_NAND_GPMC_CONFIG5, - M_NAND_GPMC_CONFIG6, - 0, -}; - -#ifdef CONFIG_LCD -#ifdef CONFIG_CMD_NAND -static int splash_load_from_nand(u32 bmp_load_addr) -{ - struct bmp_header *bmp_hdr; - int res, splash_screen_nand_offset = 0x100000; - size_t bmp_size, bmp_header_size = sizeof(struct bmp_header); - - if (bmp_load_addr + bmp_header_size >= gd->start_addr_sp) - goto splash_address_too_high; - - res = nand_read_skip_bad(&nand_info[nand_curr_device], - splash_screen_nand_offset, &bmp_header_size, - NULL, nand_info[nand_curr_device].size, - (u_char *)bmp_load_addr); - if (res < 0) - return res; - - bmp_hdr = (struct bmp_header *)bmp_load_addr; - bmp_size = le32_to_cpu(bmp_hdr->file_size); - - if (bmp_load_addr + bmp_size >= gd->start_addr_sp) - goto splash_address_too_high; - - return nand_read_skip_bad(&nand_info[nand_curr_device], - splash_screen_nand_offset, &bmp_size, - NULL, nand_info[nand_curr_device].size, - (u_char *)bmp_load_addr); - -splash_address_too_high: - printf("Error: splashimage address too high. Data overwrites U-Boot " - "and/or placed beyond DRAM boundaries.\n"); - - return -1; -} -#else -static inline int splash_load_from_nand(void) -{ - return -1; -} -#endif /* CONFIG_CMD_NAND */ - #ifdef CONFIG_SPL_BUILD /* * Routine: get_board_mem_timings @@ -121,24 +59,12 @@ void get_board_mem_timings(struct board_sdrc_timings *timings) } #endif +#define CM_T35_SPLASH_NAND_OFFSET 0x100000 + int splash_screen_prepare(void) { - char *env_splashimage_value; - u32 bmp_load_addr; - - env_splashimage_value = getenv("splashimage"); - if (env_splashimage_value == NULL) - return -1; - - bmp_load_addr = simple_strtoul(env_splashimage_value, 0, 16); - if (bmp_load_addr == 0) { - printf("Error: bad splashimage address specified\n"); - return -1; - } - - return splash_load_from_nand(bmp_load_addr); + return cl_splash_screen_prepare(CM_T35_SPLASH_NAND_OFFSET); } -#endif /* CONFIG_LCD */ /* * Routine: board_init @@ -148,9 +74,6 @@ int board_init(void) { gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ - enable_gpmc_cs_config(gpmc_nand_config, &gpmc_cfg->cs[0], - CONFIG_SYS_NAND_BASE, GPMC_SIZE_16M); - /* board id for Linux */ if (get_cpu_family() == CPU_OMAP34XX) gd->bd->bi_arch_number = MACH_TYPE_CM_T35; @@ -167,34 +90,18 @@ int board_init(void) return 0; } -static u32 cm_t3x_rev; - /* * Routine: get_board_rev * Description: read system revision */ u32 get_board_rev(void) { - if (!cm_t3x_rev) - cm_t3x_rev = cl_eeprom_get_board_rev(); - - return cm_t3x_rev; + return cl_eeprom_get_board_rev(); }; -/* - * Routine: misc_init_r - * Description: display die ID - */ int misc_init_r(void) { - u32 board_rev = get_board_rev(); - u32 rev_major = board_rev / 100; - u32 rev_minor = board_rev - (rev_major * 100); - - if ((rev_minor / 10) * 10 == rev_minor) - rev_minor = rev_minor / 10; - - printf("PCB: %u.%u\n", rev_major, rev_minor); + cl_print_pcb_info(); dieid_num_r(); return 0; @@ -381,7 +288,7 @@ static void cm_t3x_set_common_muxconf(void) MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)); /*OFF_MODE*/ MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)); /*CLKOUT1*/ MUX_VAL(CP(SYS_CLKOUT2), (IDIS | PTU | DIS | M4)); /*green LED*/ - MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)); /*JTAG_nTRST*/ + MUX_VAL(CP(JTAG_NTRST), (IEN | PTD | DIS | M0)); /*JTAG_NTRST*/ MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)); /*JTAG_TCK*/ MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)); /*JTAG_TMS*/ MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)); /*JTAG_TDI*/ @@ -457,6 +364,8 @@ void set_muxconf_regs(void) } #if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD) +#define SB_T35_WP_GPIO 59 + int board_mmc_getcd(struct mmc *mmc) { u8 val; @@ -469,41 +378,16 @@ int board_mmc_getcd(struct mmc *mmc) int board_mmc_init(bd_t *bis) { - return omap_mmc_init(0, 0, 0, -1, 59); + return omap_mmc_init(0, 0, 0, -1, SB_T35_WP_GPIO); } #endif -/* - * Routine: setup_net_chip_gmpc - * Description: Setting up the configuration GPMC registers specific to the - * Ethernet hardware. - */ -static void setup_net_chip_gmpc(void) -{ - struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE; - - enable_gpmc_cs_config(gpmc_net_config, &gpmc_cfg->cs[5], - CM_T3X_SMC911X_BASE, GPMC_SIZE_16M); - enable_gpmc_cs_config(gpmc_net_config, &gpmc_cfg->cs[4], - SB_T35_SMC911X_BASE, GPMC_SIZE_16M); - - /* Enable off mode for NWE in PADCONF_GPMC_NWE register */ - writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe); - - /* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */ - writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe); - - /* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */ - writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00, - &ctrl_base->gpmc_nadv_ale); -} - #ifdef CONFIG_SYS_I2C_OMAP34XX /* * Routine: reset_net_chip * Description: reset the Ethernet controller via TPS65930 GPIO */ -static void reset_net_chip(void) +static int cm_t3x_reset_net_chip(int gpio) { /* Set GPIO1 of TPS65930 as output */ twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, TWL4030_BASEADD_GPIO + 0x03, @@ -518,9 +402,10 @@ static void reset_net_chip(void) twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, TWL4030_BASEADD_GPIO + 0x0C, 0x02); mdelay(1); + return 0; } #else -static inline void reset_net_chip(void) {} +static inline int cm_t3x_reset_net_chip(int gpio) { return 0; } #endif #ifdef CONFIG_SMC911X @@ -547,7 +432,6 @@ static int handle_mac_address(void) return eth_setenv_enetaddr("ethaddr", enetaddr); } - /* * Routine: board_eth_init * Description: initialize module and base-board Ethernet chips @@ -556,18 +440,16 @@ int board_eth_init(bd_t *bis) { int rc = 0, rc1 = 0; - setup_net_chip_gmpc(); - reset_net_chip(); - rc1 = handle_mac_address(); if (rc1) printf("No MAC address found! "); - rc1 = smc911x_initialize(0, CM_T3X_SMC911X_BASE); + rc1 = cl_omap3_smc911x_init(0, 5, CM_T3X_SMC911X_BASE, + cm_t3x_reset_net_chip, -EINVAL); if (rc1 > 0) rc++; - rc1 = smc911x_initialize(1, SB_T35_SMC911X_BASE); + rc1 = cl_omap3_smc911x_init(1, 4, SB_T35_SMC911X_BASE, NULL, -EINVAL); if (rc1 > 0) rc++; @@ -575,16 +457,6 @@ int board_eth_init(bd_t *bis) } #endif -void __weak get_board_serial(struct tag_serialnr *serialnr) -{ - /* - * This corresponds to what happens when we can communicate with the - * eeprom but don't get a valid board serial value. - */ - serialnr->low = 0; - serialnr->high = 0; -}; - #ifdef CONFIG_USB_EHCI_OMAP struct omap_usbhs_board_data usbhs_bdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, @@ -594,21 +466,12 @@ struct omap_usbhs_board_data usbhs_bdata = { #define SB_T35_USB_HUB_RESET_GPIO 167 int ehci_hcd_init(int index, enum usb_init_type init, - struct ehci_hccr **hccr, struct ehci_hcor **hcor) + struct ehci_hccr **hccr, struct ehci_hcor **hcor) { u8 val; int offset; - if (gpio_request(SB_T35_USB_HUB_RESET_GPIO, "SB-T35 usb hub reset")) { - printf("Error: can't obtain GPIO %d for SB-T35 usb hub reset", - SB_T35_USB_HUB_RESET_GPIO); - return -1; - } - - gpio_direction_output(SB_T35_USB_HUB_RESET_GPIO, 0); - udelay(10); - gpio_set_value(SB_T35_USB_HUB_RESET_GPIO, 1); - udelay(1000); + cl_usb_hub_init(SB_T35_USB_HUB_RESET_GPIO, "sb-t35 hub rst"); offset = TWL4030_BASEADD_GPIO + TWL4030_GPIO_GPIODATADIR1; twl4030_i2c_read_u8(TWL4030_CHIP_GPIO, offset, &val); @@ -625,6 +488,7 @@ int ehci_hcd_init(int index, enum usb_init_type init, int ehci_hcd_stop(void) { + cl_usb_hub_deinit(SB_T35_USB_HUB_RESET_GPIO); return omap_ehci_hcd_stop(); } #endif /* CONFIG_USB_EHCI_OMAP */ |
